1 /*======================================================================
3 A driver for PCMCIA serial devices
5 serial_cs.c 1.134 2002/05/04 05:48:53
7 The contents of this file are subject to the Mozilla Public
8 License Version 1.1 (the "License"); you may not use this file
9 except in compliance with the License. You may obtain a copy of
10 the License at http://www.mozilla.org/MPL/
12 Software distributed under the License is distributed on an "AS
13 IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
14 implied. See the License for the specific language governing
15 rights and limitations under the License.
17 The initial developer of the original code is David A. Hinds
18 <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
19 are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
21 Alternatively, the contents of this file may be used under the
22 terms of the GNU General Public License version 2 (the "GPL"), in which
23 case the provisions of the GPL are applicable instead of the
24 above. If you wish to allow the use of your version of this file
25 only under the terms of the GPL and not to allow others to use
26 your version of this file under the MPL, indicate your decision
27 by deleting the provisions above and replace them with the notice
28 and other provisions required by the GPL. If you do not delete
29 the provisions above, a recipient may use your version of this
30 file under either the MPL or the GPL.
32 ======================================================================*/
34 #include <linux/module.h>
35 #include <linux/moduleparam.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/sched.h>
39 #include <linux/ptrace.h>
40 #include <linux/slab.h>
41 #include <linux/string.h>
42 #include <linux/timer.h>
43 #include <linux/serial_core.h>
44 #include <linux/major.h>
46 #include <asm/system.h>
48 #include <pcmcia/cs_types.h>
49 #include <pcmcia/cs.h>
50 #include <pcmcia/cistpl.h>
51 #include <pcmcia/ciscode.h>
52 #include <pcmcia/ds.h>
53 #include <pcmcia/cisreg.h>
58 static int pc_debug = PCMCIA_DEBUG;
59 module_param(pc_debug, int, 0644);
60 #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
61 static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)";
63 #define DEBUG(n, args...)
66 /*====================================================================*/
68 /* Parameters that can be set with 'insmod' */
70 /* Enable the speaker? */
71 static int do_sound = 1;
72 /* Skip strict UART tests? */
73 static int buggy_uart;
75 module_param(do_sound, int, 0444);
76 module_param(buggy_uart, int, 0444);
78 /*====================================================================*/
80 /* Table of multi-port card ID's */
85 int multi; /* 1 = multifunction, > 1 = # ports */
88 static const struct multi_id multi_id[] = {
89 { MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 },
90 { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 },
91 { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 },
92 { MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232, 4 },
93 { MANFID_SOCKET, PRODID_SOCKET_DUAL_RS232, 2 },
94 { MANFID_INTEL, PRODID_INTEL_DUAL_RS232, 2 },
95 { MANFID_NATINST, PRODID_NATINST_QUAD_RS232, 4 }
97 #define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id))
100 struct pcmcia_device *p_dev;
109 struct serial_cfg_mem {
116 static int serial_config(struct pcmcia_device * link);
119 /*======================================================================
121 After a card is removed, serial_remove() will unregister
122 the serial device(s), and release the PCMCIA configuration.
124 ======================================================================*/
126 static void serial_remove(struct pcmcia_device *link)
128 struct serial_info *info = link->priv;
131 link->state &= ~DEV_PRESENT;
133 DEBUG(0, "serial_release(0x%p)\n", link);
136 * Recheck to see if the device is still configured.
138 if (info->p_dev->state & DEV_CONFIG) {
139 for (i = 0; i < info->ndev; i++)
140 serial8250_unregister_port(info->line[i]);
142 info->p_dev->dev_node = NULL;
145 pcmcia_disable_device(link);
147 info->p_dev->state &= ~DEV_CONFIG;
151 static int serial_suspend(struct pcmcia_device *link)
153 if (link->state & DEV_CONFIG) {
154 struct serial_info *info = link->priv;
157 for (i = 0; i < info->ndev; i++)
158 serial8250_suspend_port(info->line[i]);
161 link->state &= DEV_SUSPEND_NORELEASE;
167 static int serial_resume(struct pcmcia_device *link)
170 struct serial_info *info = link->priv;
173 for (i = 0; i < info->ndev; i++)
174 serial8250_resume_port(info->line[i]);
180 /*======================================================================
182 serial_attach() creates an "instance" of the driver, allocating
183 local data structures for one device. The device is registered
186 ======================================================================*/
188 static int serial_probe(struct pcmcia_device *link)
190 struct serial_info *info;
192 DEBUG(0, "serial_attach()\n");
194 /* Create new serial device */
195 info = kmalloc(sizeof (*info), GFP_KERNEL);
198 memset(info, 0, sizeof (*info));
202 link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
203 link->io.NumPorts1 = 8;
204 link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
205 link->irq.IRQInfo1 = IRQ_LEVEL_ID;
206 link->conf.Attributes = CONF_ENABLE_IRQ;
208 link->conf.Attributes |= CONF_ENABLE_SPKR;
209 link->conf.Status = CCSR_AUDIO_ENA;
211 link->conf.IntType = INT_MEMORY_AND_IO;
213 link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
214 return serial_config(link);
217 /*======================================================================
219 This deletes a driver "instance". The device is de-registered
220 with Card Services. If it has been released, all local data
221 structures are freed. Otherwise, the structures will be freed
222 when the device is released.
224 ======================================================================*/
226 static void serial_detach(struct pcmcia_device *link)
228 struct serial_info *info = link->priv;
230 DEBUG(0, "serial_detach(0x%p)\n", link);
233 * Ensure any outstanding scheduled tasks are completed.
235 flush_scheduled_work();
238 * Ensure that the ports have been released.
246 /*====================================================================*/
248 static int setup_serial(struct pcmcia_device *handle, struct serial_info * info,
249 kio_addr_t iobase, int irq)
251 struct uart_port port;
254 memset(&port, 0, sizeof (struct uart_port));
255 port.iobase = iobase;
257 port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ;
258 port.uartclk = 1843200;
259 port.dev = &handle_to_dev(handle);
261 port.flags |= UPF_BUGGY_UART;
262 line = serial8250_register_port(&port);
264 printk(KERN_NOTICE "serial_cs: serial8250_register_port() at "
265 "0x%04lx, irq %d failed\n", (u_long)iobase, irq);
269 info->line[info->ndev] = line;
270 sprintf(info->node[info->ndev].dev_name, "ttyS%d", line);
271 info->node[info->ndev].major = TTY_MAJOR;
272 info->node[info->ndev].minor = 0x40 + line;
274 info->node[info->ndev - 1].next = &info->node[info->ndev];
280 /*====================================================================*/
283 first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
286 i = pcmcia_get_first_tuple(handle, tuple);
288 return CS_NO_MORE_ITEMS;
289 i = pcmcia_get_tuple_data(handle, tuple);
292 return pcmcia_parse_tuple(handle, tuple, parse);
296 next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
299 i = pcmcia_get_next_tuple(handle, tuple);
301 return CS_NO_MORE_ITEMS;
302 i = pcmcia_get_tuple_data(handle, tuple);
305 return pcmcia_parse_tuple(handle, tuple, parse);
308 /*====================================================================*/
310 static int simple_config(struct pcmcia_device *link)
312 static const kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
313 static const int size_table[2] = { 8, 16 };
314 struct serial_info *info = link->priv;
315 struct serial_cfg_mem *cfg_mem;
319 cistpl_cftable_entry_t *cf;
320 config_info_t config;
324 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
328 tuple = &cfg_mem->tuple;
329 parse = &cfg_mem->parse;
330 cf = &parse->cftable_entry;
333 /* If the card is already configured, look up the port and irq */
334 i = pcmcia_get_configuration_info(link, &config);
335 if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
337 if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
338 port = config.BasePort2;
340 } else if ((info->manfid == MANFID_OSITECH) &&
341 (config.NumPorts1 == 0x40)) {
342 port = config.BasePort1 + 0x28;
347 return setup_serial(link, info, port, config.AssignedIRQ);
351 /* First pass: look for a config entry that looks normal. */
352 tuple->TupleData = (cisdata_t *) buf;
353 tuple->TupleOffset = 0;
354 tuple->TupleDataMax = 255;
355 tuple->Attributes = 0;
356 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
357 /* Two tries: without IO aliases, then with aliases */
358 for (s = 0; s < 2; s++) {
359 for (try = 0; try < 2; try++) {
360 i = first_tuple(link, tuple, parse);
361 while (i != CS_NO_MORE_ITEMS) {
364 if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
366 cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
367 if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
368 (cf->io.win[0].base != 0)) {
369 link->conf.ConfigIndex = cf->index;
370 link->io.BasePort1 = cf->io.win[0].base;
371 link->io.IOAddrLines = (try == 0) ?
372 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
373 i = pcmcia_request_io(link, &link->io);
378 i = next_tuple(link, tuple, parse);
382 /* Second pass: try to find an entry that isn't picky about
383 its base address, then try to grab any standard serial port
384 address, and finally try to get any free port. */
385 i = first_tuple(link, tuple, parse);
386 while (i != CS_NO_MORE_ITEMS) {
387 if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
388 ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
389 link->conf.ConfigIndex = cf->index;
390 for (j = 0; j < 5; j++) {
391 link->io.BasePort1 = base[j];
392 link->io.IOAddrLines = base[j] ? 16 : 3;
393 i = pcmcia_request_io(link, &link->io);
398 i = next_tuple(link, tuple, parse);
402 if (i != CS_SUCCESS) {
404 "serial_cs: no usable port range found, giving up\n");
405 cs_error(link, RequestIO, i);
410 i = pcmcia_request_irq(link, &link->irq);
411 if (i != CS_SUCCESS) {
412 cs_error(link, RequestIRQ, i);
413 link->irq.AssignedIRQ = 0;
415 if (info->multi && (info->manfid == MANFID_3COM))
416 link->conf.ConfigIndex &= ~(0x08);
417 i = pcmcia_request_configuration(link, &link->conf);
418 if (i != CS_SUCCESS) {
419 cs_error(link, RequestConfiguration, i);
424 return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
427 static int multi_config(struct pcmcia_device * link)
429 struct serial_info *info = link->priv;
430 struct serial_cfg_mem *cfg_mem;
434 cistpl_cftable_entry_t *cf;
435 int i, rc, base2 = 0;
437 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
440 tuple = &cfg_mem->tuple;
441 parse = &cfg_mem->parse;
442 cf = &parse->cftable_entry;
445 tuple->TupleData = (cisdata_t *) buf;
446 tuple->TupleOffset = 0;
447 tuple->TupleDataMax = 255;
448 tuple->Attributes = 0;
449 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
451 /* First, look for a generic full-sized window */
452 link->io.NumPorts1 = info->multi * 8;
453 i = first_tuple(link, tuple, parse);
454 while (i != CS_NO_MORE_ITEMS) {
455 /* The quad port cards have bad CIS's, so just look for a
456 window larger than 8 ports and assume it will be right */
457 if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
458 (cf->io.win[0].len > 8)) {
459 link->conf.ConfigIndex = cf->index;
460 link->io.BasePort1 = cf->io.win[0].base;
461 link->io.IOAddrLines =
462 cf->io.flags & CISTPL_IO_LINES_MASK;
463 i = pcmcia_request_io(link, &link->io);
464 base2 = link->io.BasePort1 + 8;
468 i = next_tuple(link, tuple, parse);
471 /* If that didn't work, look for two windows */
472 if (i != CS_SUCCESS) {
473 link->io.NumPorts1 = link->io.NumPorts2 = 8;
475 i = first_tuple(link, tuple, parse);
476 while (i != CS_NO_MORE_ITEMS) {
477 if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
478 link->conf.ConfigIndex = cf->index;
479 link->io.BasePort1 = cf->io.win[0].base;
480 link->io.BasePort2 = cf->io.win[1].base;
481 link->io.IOAddrLines =
482 cf->io.flags & CISTPL_IO_LINES_MASK;
483 i = pcmcia_request_io(link, &link->io);
484 base2 = link->io.BasePort2;
488 i = next_tuple(link, tuple, parse);
492 if (i != CS_SUCCESS) {
493 cs_error(link, RequestIO, i);
498 i = pcmcia_request_irq(link, &link->irq);
499 if (i != CS_SUCCESS) {
501 "serial_cs: no usable port range found, giving up\n");
502 cs_error(link, RequestIRQ, i);
503 link->irq.AssignedIRQ = 0;
505 /* Socket Dual IO: this enables irq's for second port */
506 if (info->multi && (info->manfid == MANFID_SOCKET)) {
507 link->conf.Present |= PRESENT_EXT_STATUS;
508 link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
510 i = pcmcia_request_configuration(link, &link->conf);
511 if (i != CS_SUCCESS) {
512 cs_error(link, RequestConfiguration, i);
517 /* The Oxford Semiconductor OXCF950 cards are in fact single-port:
518 8 registers are for the UART, the others are extra registers */
519 if (info->manfid == MANFID_OXSEMI) {
520 if (cf->index == 1 || cf->index == 3) {
521 setup_serial(link, info, base2, link->irq.AssignedIRQ);
522 outb(12, link->io.BasePort1 + 1);
524 setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
531 setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
532 /* The Nokia cards are not really multiport cards */
533 if (info->manfid == MANFID_NOKIA) {
537 for (i = 0; i < info->multi - 1; i++)
538 setup_serial(link, info, base2 + (8 * i),
539 link->irq.AssignedIRQ);
546 /*======================================================================
548 serial_config() is scheduled to run after a CARD_INSERTION event
549 is received, to configure the PCMCIA socket, and to make the
550 serial device available to the system.
552 ======================================================================*/
554 static int serial_config(struct pcmcia_device * link)
556 struct serial_info *info = link->priv;
557 struct serial_cfg_mem *cfg_mem;
561 cistpl_cftable_entry_t *cf;
562 int i, last_ret, last_fn;
564 DEBUG(0, "serial_config(0x%p)\n", link);
566 cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
570 tuple = &cfg_mem->tuple;
571 parse = &cfg_mem->parse;
572 cf = &parse->cftable_entry;
575 tuple->TupleData = (cisdata_t *) buf;
576 tuple->TupleOffset = 0;
577 tuple->TupleDataMax = 255;
578 tuple->Attributes = 0;
579 /* Get configuration register information */
580 tuple->DesiredTuple = CISTPL_CONFIG;
581 last_ret = first_tuple(link, tuple, parse);
582 if (last_ret != CS_SUCCESS) {
583 last_fn = ParseTuple;
586 link->conf.ConfigBase = parse->config.base;
587 link->conf.Present = parse->config.rmask[0];
590 link->state |= DEV_CONFIG;
592 /* Is this a compliant multifunction card? */
593 tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
594 tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
595 info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS);
597 /* Is this a multiport card? */
598 tuple->DesiredTuple = CISTPL_MANFID;
599 if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
600 info->manfid = parse->manfid.manf;
601 for (i = 0; i < MULTI_COUNT; i++)
602 if ((info->manfid == multi_id[i].manfid) &&
603 (parse->manfid.card == multi_id[i].prodid))
606 info->multi = multi_id[i].multi;
609 /* Another check for dual-serial cards: look for either serial or
610 multifunction cards that ask for appropriate IO port ranges */
611 tuple->DesiredTuple = CISTPL_FUNCID;
612 if ((info->multi == 0) &&
613 ((first_tuple(link, tuple, parse) != CS_SUCCESS) ||
614 (parse->funcid.func == CISTPL_FUNCID_MULTI) ||
615 (parse->funcid.func == CISTPL_FUNCID_SERIAL))) {
616 tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
617 if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
618 if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
619 info->multi = cf->io.win[0].len >> 3;
620 if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
621 (cf->io.win[1].len == 8))
634 if (info->manfid == MANFID_IBM) {
635 conf_reg_t reg = { 0, CS_READ, 0x800, 0 };
636 last_ret = pcmcia_access_configuration_register(link, ®);
638 last_fn = AccessConfigurationRegister;
641 reg.Action = CS_WRITE;
642 reg.Value = reg.Value | 1;
643 last_ret = pcmcia_access_configuration_register(link, ®);
645 last_fn = AccessConfigurationRegister;
650 link->dev_node = &info->node[0];
651 link->state &= ~DEV_CONFIG_PENDING;
656 cs_error(link, last_fn, last_ret);
659 link->state &= ~DEV_CONFIG_PENDING;
664 static struct pcmcia_device_id serial_ids[] = {
665 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0057, 0x0021),
666 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0089, 0x110a),
667 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0104, 0x000a),
668 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0xea15),
669 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0109, 0x0501),
670 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0138, 0x110a),
671 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0140, 0x000a),
672 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0x3341),
673 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0143, 0xc0ab),
674 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x016c, 0x0081),
675 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x021b, 0x0101),
676 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x08a1, 0xc0ab),
677 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0d0a),
678 PCMCIA_PFC_DEVICE_MANF_CARD(1, 0x0105, 0x0e0a),
679 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63),
680 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63),
681 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef),
682 PCMCIA_PFC_DEVICE_PROD_ID123(1, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef),
683 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
684 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
685 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
686 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
687 PCMCIA_PFC_DEVICE_PROD_ID13(1, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
688 PCMCIA_PFC_DEVICE_PROD_ID12(1, "AnyCom", "Fast Ethernet + 56K COMBO", 0x578ba6e7, 0xb0ac62c4),
689 PCMCIA_PFC_DEVICE_PROD_ID12(1, "D-Link", "DME336T", 0x1a424a1c, 0xb23897ff),
690 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c),
691 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Grey Cell", "GCS3000", 0x2a151fac, 0x48b932ae),
692 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Linksys", "EtherFast 10&100 + 56K PC Card (PCMLM56)", 0x0733cc81, 0xb3765033),
693 PCMCIA_PFC_DEVICE_PROD_ID12(1, "LINKSYS", "PCMLM336", 0xf7cb0b07, 0x7a821b58),
694 PCMCIA_PFC_DEVICE_PROD_ID12(1, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e),
695 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9),
696 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed),
697 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "ComboCard", 0xdcfe12d3, 0xcd8906cc),
698 PCMCIA_PFC_DEVICE_PROD_ID12(1, "PCMCIAs", "LanModem", 0xdcfe12d3, 0xc67c648f),
699 PCMCIA_PFC_DEVICE_PROD_ID12(1, "TDK", "GlobalNetworker 3410/3412", 0x1eae9475, 0xd9a93bed),
700 PCMCIA_PFC_DEVICE_PROD_ID12(1, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
701 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0104, 0x0070),
702 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0101, 0x0562),
703 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0104, 0x0070),
704 PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x016c, 0x0020),
705 PCMCIA_MFC_DEVICE_PROD_ID123(1, "APEX DATA", "MULTICARD", "ETHERNET-MODEM", 0x11c2da09, 0x7289dc5d, 0xaad95e1f),
706 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away 28.8 PC Card ", 0xb569a6e5, 0x5bd4ff2c),
707 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "Home and Away Credit Card Adapter", 0xb569a6e5, 0x4bdf15c3),
708 PCMCIA_MFC_DEVICE_PROD_ID12(1, "IBM", "w95 Home and Away Credit Card ", 0xb569a6e5, 0xae911c15),
709 PCMCIA_MFC_DEVICE_PROD_ID1(1, "Motorola MARQUIS", 0xf03e4e77),
710 PCMCIA_MFC_DEVICE_PROD_ID2(1, "FAX/Modem/Ethernet Combo Card ", 0x1ed59302),
711 PCMCIA_DEVICE_MANF_CARD(0x0089, 0x0301),
712 PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x0276),
713 PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0039),
714 PCMCIA_DEVICE_MANF_CARD(0x0104, 0x0006),
715 PCMCIA_DEVICE_MANF_CARD(0x0105, 0x410a),
716 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d50),
717 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d51),
718 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d52),
719 PCMCIA_DEVICE_MANF_CARD(0x010b, 0x0d53),
720 PCMCIA_DEVICE_MANF_CARD(0x010b, 0xd180),
721 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x000e),
722 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x001b),
723 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0025),
724 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0045),
725 PCMCIA_DEVICE_MANF_CARD(0x0137, 0x0052),
726 PCMCIA_DEVICE_PROD_ID134("ADV", "TECH", "COMpad-32/85", 0x67459937, 0x916d02ba, 0x8fbe92ae),
727 PCMCIA_DEVICE_PROD_ID124("GATEWAY2000", "CC3144", "PCMCIA MODEM", 0x506bccae, 0xcb3685f1, 0xbd6c43ef),
728 PCMCIA_DEVICE_PROD_ID14("MEGAHERTZ", "PCMCIA MODEM", 0xf510db04, 0xbd6c43ef),
729 PCMCIA_DEVICE_PROD_ID124("TOSHIBA", "T144PF", "PCMCIA MODEM", 0xb4585a1a, 0x7271409c, 0xbd6c43ef),
730 PCMCIA_DEVICE_PROD_ID123("FUJITSU", "FC14F ", "MBH10213", 0x6ee5a3d8, 0x30ead12b, 0xb00f05a0),
731 PCMCIA_DEVICE_PROD_ID123("Novatel Wireless", "Merlin UMTS Modem", "U630", 0x32607776, 0xd9e73b13, 0xe87332e),
732 PCMCIA_DEVICE_PROD_ID13("MEGAHERTZ", "V.34 PCMCIA MODEM", 0xf510db04, 0xbb2cce4a),
733 PCMCIA_DEVICE_PROD_ID12("Brain Boxes", "Bluetooth PC Card", 0xee138382, 0xd4ce9b02),
734 PCMCIA_DEVICE_PROD_ID12("CIRRUS LOGIC", "FAX MODEM", 0xe625f451, 0xcecd6dfa),
735 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 28800 FAX/DATA MODEM", 0xa3a3062c, 0x8cbd7c76),
736 PCMCIA_DEVICE_PROD_ID12("COMPAQ", "PCMCIA 33600 FAX/DATA MODEM", 0xa3a3062c, 0x5a00ce95),
737 PCMCIA_DEVICE_PROD_ID12("Computerboards, Inc.", "PCM-COM422", 0xd0b78f51, 0x7e2d49ed),
738 PCMCIA_DEVICE_PROD_ID12("Dr. Neuhaus", "FURY CARD 14K4", 0x76942813, 0x8b96ce65),
739 PCMCIA_DEVICE_PROD_ID12("Intelligent", "ANGIA FAX/MODEM", 0xb496e65e, 0xf31602a6),
740 PCMCIA_DEVICE_PROD_ID12("Intel", "MODEM 2400+", 0x816cc815, 0x412729fb),
741 PCMCIA_DEVICE_PROD_ID12("IOTech Inc ", "PCMCIA Dual RS-232 Serial Port Card", 0x3bd2d898, 0x92abc92f),
742 PCMCIA_DEVICE_PROD_ID12("MACRONIX", "FAX/MODEM", 0x668388b3, 0x3f9bdf2f),
743 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT1432LT", 0x5f73be51, 0x0b3e2383),
744 PCMCIA_DEVICE_PROD_ID12("Multi-Tech", "MT2834LT", 0x5f73be51, 0x4cd7c09e),
745 PCMCIA_DEVICE_PROD_ID12("OEM ", "C288MX ", 0xb572d360, 0xd2385b7a),
746 PCMCIA_DEVICE_PROD_ID12("PCMCIA ", "C336MX ", 0x99bcafe9, 0xaa25bcab),
747 PCMCIA_DEVICE_PROD_ID12("Quatech Inc", "PCMCIA Dual RS-232 Serial Port Card", 0xc4420b35, 0x92abc92f),
748 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "EN2218-LAN/MODEM", 0x281f1c5d, 0x570f348e, "PCMLM28.cis"),
749 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "PCMCIA", "UE2218-LAN/MODEM", 0x281f1c5d, 0x6fdcacee, "PCMLM28.cis"),
750 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "PCMLM28.cis"),
751 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "PCMLM28.cis"),
752 PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "PCMLM28.cis"),
753 PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "DP83903.cis"),
754 PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "DP83903.cis"),
755 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "3CCFEM556.cis"),
756 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0175, 0x0000, "DP83903.cis"),
757 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0035, "3CXEM556.cis"),
758 PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x003d, "3CXEM556.cis"),
759 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0x0710, "SW_7xx_SER.cis"), /* Sierra Wireless AC710/AC750 GPRS Network Adapter R1 */
760 PCMCIA_DEVICE_CIS_MANF_CARD(0x0192, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- pre update */
761 PCMCIA_DEVICE_CIS_MANF_CARD(0x013f, 0xa555, "SW_555_SER.cis"), /* Sierra Aircard 555 CDMA 1xrtt Modem -- post update */
762 PCMCIA_DEVICE_CIS_PROD_ID12("MultiTech", "PCMCIA 56K DataFax", 0x842047ee, 0xc2efcf03, "MT5634ZLX.cis"),
763 PCMCIA_DEVICE_CIS_PROD_ID12("ADVANTECH", "COMpad-32/85B-4", 0x96913a85, 0xcec8f102, "COMpad4.cis"),
764 PCMCIA_DEVICE_CIS_PROD_ID123("ADVANTECH", "COMpad-32/85", "1.0", 0x96913a85, 0x8fbe92ae, 0x0877b627, "COMpad2.cis"),
765 PCMCIA_DEVICE_CIS_PROD_ID2("RS-COM 2P", 0xad20b156, "RS-COM-2P.cis"),
767 /* PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0160, 0x0002), */
768 /* PCMCIA_MFC_DEVICE_MANF_CARD(1, 0x0160, 0x0002), */
769 PCMCIA_DEVICE_FUNC_ID(2),
772 MODULE_DEVICE_TABLE(pcmcia, serial_ids);
774 static struct pcmcia_driver serial_cs_driver = {
775 .owner = THIS_MODULE,
779 .probe = serial_probe,
780 .remove = serial_detach,
781 .id_table = serial_ids,
782 .suspend = serial_suspend,
783 .resume = serial_resume,
786 static int __init init_serial_cs(void)
788 return pcmcia_register_driver(&serial_cs_driver);
791 static void __exit exit_serial_cs(void)
793 pcmcia_unregister_driver(&serial_cs_driver);
796 module_init(init_serial_cs);
797 module_exit(exit_serial_cs);
799 MODULE_LICENSE("GPL");