drivers/staging/wilc1000/wilc_wlan_if.h

   1 /* ///////////////////////////////////////////////////////////////////////// */
   2 /*  */
   3 /* Copyright (c) Atmel Corporation.  All rights reserved. */
   4 /*  */
   5 /* Module Name:  wilc_wlan_if.h */
   6 /*  */
   7 /*  */
   8 /* ///////////////////////////////////////////////////////////////////////// */
   9
  10 #ifndef WILC_WLAN_IF_H
  11 #define WILC_WLAN_IF_H
  12
  13 /* #define MEMORY_STATIC */
  14 /* #define USE_OLD_SPI_SW */
  15
  16 #include "wilc_oswrapper.h"
  17 #include "linux_wlan_common.h"
  18
  19 /********************************************
  20  *
  21  *      Debug Flags
  22  *
  23  ********************************************/
  24
  25 #define N_INIT                  0x00000001
  26 #define N_ERR                   0x00000002
  27 #define N_TXQ                   0x00000004
  28 #define N_INTR                  0x00000008
  29 #define N_RXQ                   0x00000010
  30
  31 /********************************************
  32  *
  33  *      Host Interface Defines
  34  *
  35  ********************************************/
  36
  37 #define HIF_SDIO                (0)
  38 #define HIF_SPI                 BIT(0)
  39 #define HIF_SDIO_GPIO_IRQ       BIT(2)
  40
  41 /********************************************
  42  *
  43  *      Tx/Rx Buffer Size Defines
  44  *
  45  ********************************************/
  46
  47 #define CE_TX_BUFFER_SIZE       (64 * 1024)
  48 #define CE_RX_BUFFER_SIZE       (384 * 1024)
  49
  50 /********************************************
  51  *
  52  *      Wlan Interface Defines
  53  *
  54  ********************************************/
  55
  56 typedef struct {
  57         u32 read_write:         1;
  58         u32 function:           3;
  59         u32 raw:                1;
  60         u32 address:            17;
  61         u32 data:               8;
  62 } sdio_cmd52_t;
  63
  64 typedef struct {
  65         /* struct { */
  66         u32 read_write:         1;
  67         u32 function:           3;
  68         u32 block_mode:         1;
  69         u32 increment:          1;
  70         u32 address:            17;
  71         u32 count:              9;
  72         /* } bit; */
  73         u8 *buffer;
  74         u32 block_size;
  75 } sdio_cmd53_t;
  76
  77 typedef struct {
  78         void (*os_debug)(u8 *);
  79         int (*os_wait)(void *, u32);
  80 } wilc_wlan_os_func_t;
  81
  82 typedef struct {
  83         int io_type;
  84         int (*io_init)(void *);
  85         void (*io_deinit)(void *);
  86         union {
  87                 struct {
  88                         int (*sdio_cmd52)(sdio_cmd52_t *);
  89                         int (*sdio_cmd53)(sdio_cmd53_t *);
  90                         int (*sdio_set_max_speed)(void);
  91                         int (*sdio_set_default_speed)(void);
  92                 } sdio;
  93                 struct {
  94                         int (*spi_max_speed)(void);
  95                         int (*spi_tx)(u8 *, u32);
  96                         int (*spi_rx)(u8 *, u32);
  97                         int (*spi_trx)(u8 *, u8 *, u32);
  98                 } spi;
  99         } u;
 100 } wilc_wlan_io_func_t;
 101
 102 typedef struct {
 103         void (*rx_indicate)(u8 *, u32, u32);
 104         void (*rx_complete)(void);
 105 } wilc_wlan_net_func_t;
 106
 107 typedef struct {
 108         void (*mac_indicate)(int);
 109 } wilc_wlan_indicate_func_t;
 110 #define WILC_MAC_INDICATE_STATUS        0x1
 111 #define WILC_MAC_STATUS_INIT            -1
 112 #define WILC_MAC_STATUS_READY           0
 113 #define WILC_MAC_STATUS_CONNECT         1
 114
 115 #define WILC_MAC_INDICATE_SCAN          0x2
 116
 117 typedef struct {
 118         void *os_private;
 119
 120         struct mutex *hif_critical_section;
 121
 122         u32 tx_buffer_size;
 123         void *txq_critical_section;
 124
 125         void *txq_add_to_head_critical_section;
 126         void *txq_spin_lock;
 127
 128         void *txq_wait_event;
 129
 130 #if defined(MEMORY_STATIC)
 131         u32 rx_buffer_size;
 132 #endif
 133         void *rxq_critical_section;
 134
 135         struct semaphore *cfg_wait_event;
 136 } wilc_wlan_os_context_t;
 137
 138 typedef struct {
 139         wilc_wlan_os_context_t os_context;
 140         wilc_wlan_os_func_t os_func;
 141         wilc_wlan_io_func_t io_func;
 142         wilc_wlan_net_func_t net_func;
 143         wilc_wlan_indicate_func_t indicate_func;
 144 } wilc_wlan_inp_t;
 145
 146 struct tx_complete_data {
 147         int size;
 148         void *buff;
 149         u8 *pBssid;
 150         struct sk_buff *skb;
 151 };
 152
 153 typedef void (*wilc_tx_complete_func_t)(void *, int);
 154
 155 #define WILC_TX_ERR_NO_BUF      (-2)
 156
 157 typedef struct {
 158         int (*wlan_firmware_download)(const u8 *, u32);
 159         int (*wlan_start)(void);
 160         int (*wlan_stop)(void);
 161         int (*wlan_add_to_tx_que)(void *, u8 *, u32, wilc_tx_complete_func_t);
 162         int (*wlan_handle_tx_que)(u32 *);
 163         void (*wlan_handle_rx_isr)(void);
 164         void (*wlan_cleanup)(void);
 165         int (*wlan_cfg_set)(int, u32, u8 *, u32, int, u32);
 166         int (*wlan_cfg_get)(int, u32, int, u32);
 167         int (*wlan_cfg_get_value)(u32, u8 *, u32);
 168         int (*wlan_add_mgmt_to_tx_que)(void *, u8 *, u32,
 169                                        wilc_tx_complete_func_t);
 170 } wilc_wlan_oup_t;
 171
 172 /********************************************
 173  *
 174  *      Wlan Configuration ID
 175  *
 176  ********************************************/
 177
 178 #define MAX_SSID_LEN            33
 179 #define MAX_RATES_SUPPORTED     12
 180
 181 #define INFINITE_SLEEP_TIME     ((u32)0xFFFFFFFF)
 182
 183 #ifdef WILC_PARSE_SCAN_IN_HOST
 184 typedef enum {
 185         SUPP_RATES_IE           = 1,
 186         EXT_SUPP_RATES_IE       = 50,
 187         HT_CAPABILITY_IE        = 45,
 188         RSN_IE                  = 48,
 189         WPA_IE                  = 221,
 190         WMM_IE                  = 221,
 191         P2P_IE                  = 221,
 192 } BEACON_IE;
 193 #endif
 194 typedef enum {
 195         INFRASTRUCTURE          = 0,
 196         INDEPENDENT,
 197         AP,
 198 } BSSTYPE_T;
 199
 200 typedef enum {
 201         RATE_AUTO               = 0,
 202         RATE_1MB                = 1,
 203         RATE_2MB                = 2,
 204         RATE_5MB                = 5,
 205         RATE_6MB                = 6,
 206         RATE_9MB                = 9,
 207         RATE_11MB               = 11,
 208         RATE_12MB               = 12,
 209         RATE_18MB               = 18,
 210         RATE_24MB               = 24,
 211         RATE_26MB               = 36,
 212         RATE_48MB               = 48,
 213         RATE_54MB               = 54
 214 } TX_RATE_T;
 215
 216 typedef enum {
 217         B_ONLY_MODE             = 0,    /* 1, 2 M, otherwise 5, 11 M */
 218         G_ONLY_MODE,                    /* 6,12,24 otherwise 9,18,36,48,54 */
 219         G_MIXED_11B_1_MODE,             /* 1,2,5.5,11 otherwise all on */
 220         G_MIXED_11B_2_MODE,             /* 1,2,5,11,6,12,24 otherwise all on */
 221 } G_OPERATING_MODE_T;
 222
 223 typedef enum {
 224         G_SHORT_PREAMBLE        = 0,    /* Short Preamble */
 225         G_LONG_PREAMBLE         = 1,    /* Long Preamble */
 226         G_AUTO_PREAMBLE         = 2,    /* Auto Preamble Selection */
 227 } G_PREAMBLE_T;
 228
 229 #define MAC_CONNECTED           1
 230 #define MAC_DISCONNECTED        0
 231
 232 #define SCAN_DONE               TRUE
 233 typedef enum {
 234         PASSIVE_SCAN            = 0,
 235         ACTIVE_SCAN             = 1,
 236 } SCANTYPE_T;
 237
 238 typedef enum {
 239         NO_POWERSAVE            = 0,
 240         MIN_FAST_PS             = 1,
 241         MAX_FAST_PS             = 2,
 242         MIN_PSPOLL_PS           = 3,
 243         MAX_PSPOLL_PS           = 4
 244 } USER_PS_MODE_T;
 245
 246 typedef enum {
 247         CHIP_WAKEDUP            = 0,
 248         CHIP_SLEEPING_AUTO      = 1,
 249         CHIP_SLEEPING_MANUAL    = 2
 250 } CHIP_PS_STATE_T;
 251
 252 typedef enum {
 253         ACQUIRE_ONLY            = 0,
 254         ACQUIRE_AND_WAKEUP      = 1,
 255 } BUS_ACQUIRE_T;
 256
 257 typedef enum {
 258         RELEASE_ONLY            = 0,
 259         RELEASE_ALLOW_SLEEP     = 1,
 260 } BUS_RELEASE_T;
 261
 262 typedef enum {
 263         NO_SECURITY             = 0,
 264         WEP_40                  = 0x3,
 265         WEP_104                 = 0x7,
 266         WPA_AES                 = 0x29,
 267         WPA_TKIP                = 0x49,
 268         WPA_AES_TKIP            = 0x69, /* Aes or Tkip */
 269         WPA2_AES                = 0x31,
 270         WPA2_TKIP               = 0x51,
 271         WPA2_AES_TKIP           = 0x71, /* Aes or Tkip */
 272 } SECURITY_T;
 273
 274 typedef enum {
 275         OPEN_SYSTEM             = 1,
 276         SHARED_KEY              = 2,
 277         ANY                     = 3,
 278         IEEE8021                = 5
 279 } AUTHTYPE_T;
 280
 281 typedef enum {
 282         SITE_SURVEY_1CH         = 0,
 283         SITE_SURVEY_ALL_CH      = 1,
 284         SITE_SURVEY_OFF         = 2
 285 } SITE_SURVEY_T;
 286
 287 typedef enum {
 288         NORMAL_ACK              = 0,
 289         NO_ACK,
 290 } ACK_POLICY_T;
 291
 292 typedef enum {
 293         DONT_RESET              = 0,
 294         DO_RESET                = 1,
 295         NO_REQUEST              = 2,
 296 } RESET_REQ_T;
 297
 298 typedef enum {
 299         REKEY_DISABLE           = 1,
 300         REKEY_TIME_BASE,
 301         REKEY_PKT_BASE,
 302         REKEY_TIME_PKT_BASE
 303 } RSNA_REKEY_POLICY_T;
 304
 305 typedef enum {
 306         FILTER_NO               = 0x00,
 307         FILTER_AP_ONLY          = 0x01,
 308         FILTER_STA_ONLY         = 0x02
 309 } SCAN_CLASS_FITLER_T;
 310
 311 typedef enum {
 312         PRI_HIGH_RSSI           = 0x00,
 313         PRI_LOW_RSSI            = 0x04,
 314         PRI_DETECT              = 0x08
 315 } SCAN_PRI_T;
 316
 317 typedef enum {
 318         CH_FILTER_OFF           = 0x00,
 319         CH_FILTER_ON            = 0x10
 320 } CH_FILTER_T;
 321
 322 typedef enum {
 323         AUTO_PROT               = 0,    /* Auto */
 324         NO_PROT,                        /* Do not use any protection */
 325         ERP_PROT,                       /* Protect all ERP frame exchanges */
 326         HT_PROT,                        /* Protect all HT frame exchanges  */
 327         GF_PROT,                        /* Protect all GF frame exchanges  */
 328 } N_PROTECTION_MODE_T;
 329
 330 typedef enum {
 331         G_SELF_CTS_PROT,
 332         G_RTS_CTS_PROT,
 333 } G_PROTECTION_MODE_T;
 334
 335 typedef enum {
 336         HT_MIXED_MODE           = 1,
 337         HT_ONLY_20MHZ_MODE,
 338         HT_ONLY_20_40MHZ_MODE,
 339 } N_OPERATING_MODE_T;
 340
 341 typedef enum {
 342         NO_DETECT               = 0,
 343         DETECT_ONLY             = 1,
 344         DETECT_PROTECT          = 2,
 345         DETECT_PROTECT_REPORT   = 3,
 346 } N_OBSS_DETECTION_T;
 347
 348 typedef enum {
 349         RTS_CTS_NONHT_PROT      = 0,    /* RTS-CTS at non-HT rate */
 350         FIRST_FRAME_NONHT_PROT,         /* First frame at non-HT rate */
 351         LSIG_TXOP_PROT,                 /* LSIG TXOP Protection */
 352         FIRST_FRAME_MIXED_PROT,         /* First frame at Mixed format */
 353 } N_PROTECTION_TYPE_T;
 354
 355 typedef enum {
 356         STATIC_MODE             = 1,
 357         DYNAMIC_MODE            = 2,
 358         MIMO_MODE               = 3,    /* power save disable */
 359 } N_SMPS_MODE_T;
 360
 361 typedef enum {
 362         DISABLE_SELF_CTS,
 363         ENABLE_SELF_CTS,
 364         DISABLE_TX_ABORT,
 365         ENABLE_TX_ABORT,
 366         HW_TRIGGER_ABORT,
 367         SW_TRIGGER_ABORT,
 368 } TX_ABORT_OPTION_T;
 369
 370 typedef enum {
 371         WID_CHAR                = 0,
 372         WID_SHORT               = 1,
 373         WID_INT                 = 2,
 374         WID_STR                 = 3,
 375         WID_BIN_DATA            = 4,
 376         WID_BIN                 = 5,
 377         WID_IP                  = 6,
 378         WID_ADR                 = 7,
 379         WID_UNDEF               = 8,
 380         WID_TYPE_FORCE_32BIT    = 0xFFFFFFFF
 381
 382 } WID_TYPE_T, tenuWIDtype;
 383
 384 typedef enum {
 385         WID_NIL                         = 0xffff,
 386
 387         /*
 388          *  BSS Type
 389          *  -----------------------------------------------------------
 390          *  Configuration : Infrastructure   Independent   Access Point
 391          *  Values to set :         0               1            2
 392          *  -----------------------------------------------------------
 393          */
 394         WID_BSS_TYPE                    = 0x0000,
 395
 396         /*
 397          *  Transmit Rate
 398          *  -----------------------------------------------------------
 399          *  Configuration : 1  2  5.5  11  6  9  12  18  24  36  48  54
 400          *  Values to set : 1  2    5  11  6  9  12  18  24  36  48  54
 401          *  -----------------------------------------------------------
 402          */
 403         WID_CURRENT_TX_RATE             = 0x0001,
 404
 405         /*
 406          *  Channel
 407          *  -----------------------------------------------------------
 408          *  Configuration(g) : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 409          *  Values to set    : 1  2  3  4  5  6  7  8  9 10 11 12 13 14
 410          *  -----------------------------------------------------------
 411          */
 412         WID_CURRENT_CHANNEL             = 0x0002,
 413
 414         /*
 415          *  Preamble
 416          *  -----------------------------------------------------------
 417          *  Configuration :    short    long      Auto
 418          *  Values to set :       0       1         2
 419          *  -----------------------------------------------------------
 420          */
 421         WID_PREAMBLE                    = 0x0003,
 422
 423         /*
 424          * 11g operating mode (ignored if 11g not present)
 425          *  -----------------------------------------------------------
 426          *  Configuration :   HighPerf  Compat(RSet #1) Compat(RSet #2)
 427          *  Values to set :          1               2               3
 428          *  -----------------------------------------------------------
 429          */
 430         WID_11G_OPERATING_MODE          = 0x0004,
 431
 432         /*
 433          *  Mac status (response only)
 434          *  -----------------------------------------------------------
 435          *  Configuration :   disconnect  connect
 436          *  Values to get :          0       1
 437          *  -----------------------------------------------------------
 438          */
 439         WID_STATUS                      = 0x0005,
 440
 441         /*
 442          *  Scan type
 443          *  -----------------------------------------------------------
 444          *  Configuration :   Passive Scanning   Active Scanning
 445          *  Values to set :                  0                 1
 446          *  -----------------------------------------------------------
 447          */
 448         WID_SCAN_TYPE                   = 0x0007,
 449
 450         /*
 451          *  Key Id (WEP default key Id)
 452          *  -----------------------------------------------------------
 453          *  Configuration :   Any value between 0 to 3
 454          *  Values to set :   Same value. Default is 0
 455          *  -----------------------------------------------------------
 456          */
 457         WID_KEY_ID                      = 0x0009,
 458
 459         /*
 460          *  QoS Enable
 461          *  -----------------------------------------------------------
 462          *  Configuration :   QoS Disable   WMM Enable
 463          *  Values to set :   0             1
 464          *  -----------------------------------------------------------
 465          */
 466         WID_QOS_ENABLE                  = 0x000A,
 467
 468         /*
 469          *  Power Management
 470          *  -----------------------------------------------------------
 471          *  Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE
 472          *  Values to set : 0            1             2
 473          *  -----------------------------------------------------------
 474          */
 475         WID_POWER_MANAGEMENT            = 0x000B,
 476
 477         /*
 478          *  WEP/802 11I Configuration
 479          *  -----------------------------------------------------------
 480          *  Configuration:Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP
 481          *  Values (0x)  :   00     03   07     29       49       31      51
 482          *  Configuration:WPA-AES+TKIP RSN-AES+TKIP
 483          *  Values (0x)  :      69        71
 484          *  -----------------------------------------------------------
 485          */
 486         WID_11I_MODE                    = 0x000C,
 487
 488         /*
 489          *  WEP Configuration: Used in BSS STA mode only when WEP is enabled
 490          *  -----------------------------------------------------------
 491          *  Configuration : Open System Shared Key Any Type | 802.1x Auth
 492          *  Values (0x)   :    01             02         03 |    BIT2
 493          *  -----------------------------------------------------------
 494          */
 495         WID_AUTH_TYPE                   = 0x000D,
 496
 497         /*
 498          *  Site Survey Type
 499          *  -----------------------------------------------------------
 500          *  Configuration       :  Values to set
 501          *  Survey 1 Channel    :  0
 502          *  survey all Channels :  1
 503          *  Disable Site Survey :  2
 504          *  -----------------------------------------------------------
 505          */
 506         WID_SITE_SURVEY                 = 0x000E,
 507
 508         /*
 509          *  Listen Interval
 510          *  -----------------------------------------------------------
 511          *  Configuration :   Any value between 1 to 255
 512          *  Values to set :   Same value. Default is 3
 513          *  -----------------------------------------------------------
 514          */
 515         WID_LISTEN_INTERVAL             = 0x000F,
 516
 517         /*
 518          *  DTIM Period
 519          *  -----------------------------------------------------------
 520          *  Configuration :   Any value between 1 to 255
 521          *  Values to set :   Same value. Default is 3
 522          *  -----------------------------------------------------------
 523          */
 524         WID_DTIM_PERIOD                 = 0x0010,
 525
 526         /*
 527          *  ACK Policy
 528          *  -----------------------------------------------------------
 529          *  Configuration :   Normal Ack            No Ack
 530          *  Values to set :       0                   1
 531          *  -----------------------------------------------------------
 532          */
 533         WID_ACK_POLICY                  = 0x0011,
 534
 535         /*
 536          *  Reset MAC (Set only)
 537          *  -----------------------------------------------------------
 538          *  Configuration :   Don't Reset       Reset   No Request
 539          *  Values to set :       0               1         2
 540          *  -----------------------------------------------------------
 541          */
 542         WID_RESET                       = 0x0012,
 543
 544         /*
 545          *  Broadcast SSID Option: Setting this will adhere to "" SSID element
 546          *  -----------------------------------------------------------
 547          *  Configuration :   Enable             Disable
 548          *  Values to set :   1                  0
 549          *  -----------------------------------------------------------
 550          */
 551         WID_BCAST_SSID                  = 0x0015,
 552
 553         /*
 554          *  Disconnect (Station)
 555          *  -----------------------------------------------------------
 556          *  Configuration :   Association ID
 557          *  Values to set :   Association ID
 558          *  -----------------------------------------------------------
 559          */
 560         WID_DISCONNECT                  = 0x0016,
 561
 562         /*
 563          *  11a Tx Power Level
 564          *  -----------------------------------------------------------
 565          *  Configuration : Sets TX Power (Higher the value greater the power)
 566          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 567          *  -----------------------------------------------------------
 568          */
 569         WID_TX_POWER_LEVEL_11A          = 0x0018,
 570
 571         /*
 572          *  Group Key Update Policy Selection
 573          *  -----------------------------------------------------------
 574          *  Configuration : Disabled timeBased packetBased timePacketBased
 575          *  Values to set :   1            2          3              4
 576          *  -----------------------------------------------------------
 577          */
 578         WID_REKEY_POLICY                = 0x0019,
 579
 580         /*
 581          *  Allow Short Slot
 582          *  -----------------------------------------------------------
 583          *  Configuration : Disallow Short Slot      Allow Short Slot
 584          *          (Enable Only Long Slot) (Enable Short Slot if applicable)
 585          *  Values to set :    0         1
 586          *  -----------------------------------------------------------
 587          */
 588         WID_SHORT_SLOT_ALLOWED          = 0x001A,
 589
 590         WID_PHY_ACTIVE_REG              = 0x001B,
 591
 592         /*
 593          *  11b Tx Power Level
 594          *  -----------------------------------------------------------
 595          *  Configuration : Sets TX Power (Higher the value greater the power)
 596          *  Values to set : Any value between 0 and 63 (inclusive Default 48)
 597          *  -----------------------------------------------------------
 598          */
 599         WID_TX_POWER_LEVEL_11B          = 0x001D,
 600
 601         /*
 602          *  Scan Request
 603          *  -----------------------------------------------------------
 604          *  Configuration : Request default scan
 605          *  Values to set : 0
 606          *  -----------------------------------------------------------
 607          */
 608         WID_START_SCAN_REQ              = 0x001E,
 609
 610         /*
 611          *  Rssi (get only)
 612          *  -----------------------------------------------------------
 613          *  Configuration :
 614          *  Values to get : Rssi value
 615          *  -----------------------------------------------------------
 616          */
 617         WID_RSSI                        = 0x001F,
 618
 619         /*
 620          * Join Request
 621          *  -----------------------------------------------------------
 622          *  Configuration : Request to join
 623          *  Values to set : index of scan result
 624          *  -----------------------------------------------------------
 625          */
 626         WID_JOIN_REQ                    = 0x0020,
 627
 628         WID_LINKSPEED                   = 0x0026,
 629
 630         /*
 631          *  Enable User Control of TX Power
 632          *  -----------------------------------------------------------
 633          *  Configuration : Disable                  Enable
 634          *  Values to set :    0                       1
 635          *  -----------------------------------------------------------
 636          */
 637         WID_USER_CONTROL_ON_TX_POWER    = 0x0027,
 638
 639         WID_MEMORY_ACCESS_8BIT          = 0x0029,
 640
 641         /*
 642          *  Enable Auto RX Sensitivity feature
 643          *  -----------------------------------------------------------
 644          *  Configuration : Disable                  Enable
 645          *  Values to set :    0                       1
 646          *  -----------------------------------------------------------
 647          */
 648         WID_AUTO_RX_SENSITIVITY         = 0x0032,
 649
 650         /*
 651          *  Receive Buffer Based Ack
 652          *  -----------------------------------------------------------
 653          *  Configuration : Disable                  Enable
 654          *  Values to set :    0                       1
 655          *  -----------------------------------------------------------
 656          */
 657         WID_DATAFLOW_CONTROL            = 0x0033,
 658
 659         /*
 660          *  Scan Filter
 661          *  -----------------------------------------------------------
 662          *  Configuration : Class       No filter   AP only   Station Only
 663          *  Values to set :                0           1           2
 664          *  Configuration : Priority    High Rssi   Low Rssi     Detect
 665          *  Values to set :                0          0x4         0x0
 666          *  Configuration : Channel     filter off  filter on
 667          *  Values to set :                0          0x10
 668          *  -----------------------------------------------------------
 669          */
 670         WID_SCAN_FILTER                 = 0x0036,
 671
 672         /*
 673          *  Link Loss Threshold (measure in the beacon period)
 674          *  -----------------------------------------------------------
 675          *  Configuration : Any value between 10 and 254(Set to 255 disable)
 676          *  Values to set : Same value. Default is 10
 677          *  -----------------------------------------------------------
 678          */
 679         WID_LINK_LOSS_THRESHOLD         = 0x0037,
 680
 681         WID_ABORT_RUNNING_SCAN          = 0x003E,
 682
 683         /* NMAC Character WID list */
 684         WID_WPS_START                   = 0x0043,
 685
 686         /*
 687          *  Protection mode for MAC
 688          *  -----------------------------------------------------------
 689          *  Configuration :  Auto  No protection  ERP    HT    GF
 690          *  Values to set :  0     1              2      3     4
 691          *  -----------------------------------------------------------
 692          */
 693         WID_11N_PROT_MECH               = 0x0080,
 694
 695         /*
 696          *  ERP Protection type for MAC
 697          *  -----------------------------------------------------------
 698          *  Configuration :  Self-CTS   RTS-CTS
 699          *  Values to set :  0          1
 700          *  -----------------------------------------------------------
 701          */
 702         WID_11N_ERP_PROT_TYPE           = 0x0081,
 703
 704         /*
 705          *  HT Option Enable
 706          *  -----------------------------------------------------------
 707          *  Configuration :   HT Enable          HT Disable
 708          *  Values to set :   1                  0
 709          *  -----------------------------------------------------------
 710          */
 711         WID_11N_ENABLE                  = 0x0082,
 712
 713         /*
 714          *  11n Operating mode (Note that 11g operating mode will also be
 715          *  used in addition to this, if this is set to HT Mixed mode)
 716          *  -----------------------------------------------------------
 717          *   Configuration :  HT Mixed  HT Only-20MHz   HT Only-20/40MHz
 718          *  Values to set :     1         2               3
 719          *  -----------------------------------------------------------
 720          */
 721         WID_11N_OPERATING_MODE          = 0x0083,
 722
 723         /*
 724          *  11n OBSS non-HT STA Detection flag
 725          *  -----------------------------------------------------------
 726          *  Configuration :  Do not detect
 727          *  Values to set :  0
 728          *  Configuration :  Detect, do not protect or report
 729          *  Values to set :  1
 730          *  Configuration :  Detect, protect and do not report
 731          *  Values to set :  2
 732          *  Configuration :  Detect, protect and report to other BSS
 733          *  Values to set :  3
 734          *  -----------------------------------------------------------
 735          */
 736         WID_11N_OBSS_NONHT_DETECTION    = 0x0084,
 737
 738         /*
 739          *  11n HT Protection Type
 740          *  -----------------------------------------------------------
 741          *  Configuration :  RTS-CTS   First Frame Exchange at non-HT-rate
 742          *  Values to set :  0         1
 743          *  Configuration :  LSIG TXOP First Frame Exchange in Mixed Fmt
 744          *  Values to set :  2         3
 745          *  -----------------------------------------------------------
 746          */
 747         WID_11N_HT_PROT_TYPE            = 0x0085,
 748
 749         /*
 750          *  11n RIFS Protection Enable Flag
 751          *  -----------------------------------------------------------
 752          *  Configuration :  Disable    Enable
 753          *  Values to set :  0          1
 754          *  -----------------------------------------------------------
 755          */
 756         WID_11N_RIFS_PROT_ENABLE        = 0x0086,
 757
 758         /*
 759          *  SMPS Mode
 760          *  -----------------------------------------------------------
 761          *  Configuration :  Static   Dynamic   MIMO (Power Save Disabled)
 762          *  Values to set :  1        2         3
 763          *  -----------------------------------------------------------
 764          */
 765         WID_11N_SMPS_MODE               = 0x0087,
 766
 767         /*
 768          *  Current transmit MCS
 769          *  -----------------------------------------------------------
 770          *  Configuration :  MCS Index for data rate
 771          *  Values to set :  0 to 7
 772          *  -----------------------------------------------------------
 773          */
 774         WID_11N_CURRENT_TX_MCS          = 0x0088,
 775
 776         WID_11N_PRINT_STATS             = 0x0089,
 777
 778         /*
 779          *  11n Short GI Enable Flag
 780          *  -----------------------------------------------------------
 781          *  Configuration :  Disable    Enable
 782          *  Values to set :  0          1
 783          *  -----------------------------------------------------------
 784          */
 785         WID_11N_SHORT_GI_ENABLE         = 0x008D,
 786
 787         /*
 788          *  11n RIFS Enable Flag
 789          *  -----------------------------------------------------------
 790          *  Configuration :  Disable    Enable
 791          *  Values to set :  0          1
 792          *  -----------------------------------------------------------
 793          */
 794         WID_RIFS_MODE                   = 0x0094,
 795
 796         /*
 797          *  TX Abort Feature
 798          *  -----------------------------------------------------------
 799          *  Configuration :  Disable Self CTS    Enable Self CTS
 800          *  Values to set :             0                      1
 801          *  Configuration :  Disable TX Abort    Enable TX Abort
 802          *  Values to set :             2                      3
 803          *  Configuration :  Enable HW TX Abort Enable SW TX Abort
 804          *  Values to set :             4                      5
 805          *  -----------------------------------------------------------
 806          */
 807         WID_TX_ABORT_CONFIG             = 0x00A1,
 808
 809         WID_REG_TSSI_11B_VALUE          = 0x00A6,
 810         WID_REG_TSSI_11G_VALUE          = 0x00A7,
 811         WID_REG_TSSI_11N_VALUE          = 0x00A8,
 812         WID_TX_CALIBRATION              = 0x00A9,
 813         WID_DSCR_TSSI_11B_VALUE         = 0x00AA,
 814         WID_DSCR_TSSI_11G_VALUE         = 0x00AB,
 815         WID_DSCR_TSSI_11N_VALUE         = 0x00AC,
 816
 817         /*
 818          *  Immediate Block-Ack Support
 819          *  -----------------------------------------------------------
 820          *  Configuration : Disable                  Enable
 821          *  Values to set :    0                       1
 822          *  -----------------------------------------------------------
 823          */
 824         WID_11N_IMMEDIATE_BA_ENABLED    = 0x00AF,
 825
 826         /*
 827          *  TXOP Disable Flag
 828          *  -----------------------------------------------------------
 829          *  Configuration : Disable                  Enable
 830          *  Values to set :    1                        0
 831          *  -----------------------------------------------------------
 832          */
 833         WID_11N_TXOP_PROT_DISABLE       = 0x00B0,
 834
 835         WID_TX_POWER_LEVEL_11N          = 0x00B1,
 836
 837         /* Custom Character WID list */
 838         WID_PC_TEST_MODE                = 0x00C8,
 839         /* SCAN Complete notification WID*/
 840         WID_SCAN_COMPLETE               = 0x00C9,
 841
 842         WID_DEL_BEACON                  = 0x00CA,
 843
 844         WID_LOGTerminal_Switch          = 0x00CD,
 845         /*  EMAC Short WID list */
 846         /*  RTS Threshold */
 847         /*
 848          *  -----------------------------------------------------------
 849          *  Configuration :   Any value between 256 to 2347
 850          *  Values to set :   Same value. Default is 2347
 851          *  -----------------------------------------------------------
 852          */
 853         WID_RTS_THRESHOLD               = 0x1000,
 854
 855         /*
 856          *  Fragmentation Threshold
 857          *  -----------------------------------------------------------
 858          *  Configuration :   Any value between 256 to 2346
 859          *  Values to set :   Same value. Default is 2346
 860          *  -----------------------------------------------------------
 861          */
 862         WID_FRAG_THRESHOLD              = 0x1001,
 863
 864         WID_SHORT_RETRY_LIMIT           = 0x1002,
 865         WID_LONG_RETRY_LIMIT            = 0x1003,
 866         WID_BEACON_INTERVAL             = 0x1006,
 867         WID_MEMORY_ACCESS_16BIT         = 0x1008,
 868         WID_RX_SENSE                    = 0x100B,
 869         WID_ACTIVE_SCAN_TIME            = 0x100C,
 870         WID_PASSIVE_SCAN_TIME           = 0x100D,
 871
 872         WID_SITE_SURVEY_SCAN_TIME       = 0x100E,
 873         WID_JOIN_START_TIMEOUT          = 0x100F,
 874         WID_AUTH_TIMEOUT                = 0x1010,
 875         WID_ASOC_TIMEOUT                = 0x1011,
 876         WID_11I_PROTOCOL_TIMEOUT        = 0x1012,
 877         WID_EAPOL_RESPONSE_TIMEOUT      = 0x1013,
 878
 879         /* NMAC Short WID list */
 880         WID_11N_SIG_QUAL_VAL            = 0x1085,
 881         WID_CCA_THRESHOLD               = 0x1087,
 882
 883         /* Custom Short WID list */
 884
 885         /* EMAC Integer WID list */
 886         WID_FAILED_COUNT                = 0x2000,
 887         WID_RETRY_COUNT                 = 0x2001,
 888         WID_MULTIPLE_RETRY_COUNT        = 0x2002,
 889         WID_FRAME_DUPLICATE_COUNT       = 0x2003,
 890         WID_ACK_FAILURE_COUNT           = 0x2004,
 891         WID_RECEIVED_FRAGMENT_COUNT     = 0x2005,
 892         WID_MCAST_RECEIVED_FRAME_COUNT  = 0x2006,
 893         WID_FCS_ERROR_COUNT             = 0x2007,
 894         WID_SUCCESS_FRAME_COUNT         = 0x2008,
 895         WID_HUT_TX_COUNT                = 0x200A,
 896         WID_TX_FRAGMENT_COUNT           = 0x200B,
 897         WID_TX_MULTICAST_FRAME_COUNT    = 0x200C,
 898         WID_RTS_SUCCESS_COUNT           = 0x200D,
 899         WID_RTS_FAILURE_COUNT           = 0x200E,
 900         WID_WEP_UNDECRYPTABLE_COUNT     = 0x200F,
 901         WID_REKEY_PERIOD                = 0x2010,
 902         WID_REKEY_PACKET_COUNT          = 0x2011,
 903         WID_1X_SERV_ADDR                = 0x2012,
 904         WID_STACK_IP_ADDR               = 0x2013,
 905         WID_STACK_NETMASK_ADDR          = 0x2014,
 906         WID_HW_RX_COUNT                 = 0x2015,
 907         WID_MEMORY_ADDRESS              = 0x201E,
 908         WID_MEMORY_ACCESS_32BIT         = 0x201F,
 909         WID_RF_REG_VAL                  = 0x2021,
 910
 911         /* NMAC Integer WID list */
 912         WID_11N_PHY_ACTIVE_REG_VAL      = 0x2080,
 913
 914         /* Custom Integer WID list */
 915         WID_GET_INACTIVE_TIME           = 0x2084,
 916         WID_SET_DRV_HANDLER             = 0X2085,
 917         WID_SET_OPERATION_MODE          = 0X2086,
 918         /* EMAC String WID list */
 919         WID_SSID                        = 0x3000,
 920         WID_FIRMWARE_VERSION            = 0x3001,
 921         WID_OPERATIONAL_RATE_SET        = 0x3002,
 922         WID_BSSID                       = 0x3003,
 923         WID_WEP_KEY_VALUE               = 0x3004,
 924         WID_11I_PSK                     = 0x3008,
 925         WID_11E_P_ACTION_REQ            = 0x3009,
 926         WID_1X_KEY                      = 0x300A,
 927         WID_HARDWARE_VERSION            = 0x300B,
 928         WID_MAC_ADDR                    = 0x300C,
 929         WID_HUT_DEST_ADDR               = 0x300D,
 930         WID_PHY_VERSION                 = 0x300F,
 931         WID_SUPP_USERNAME               = 0x3010,
 932         WID_SUPP_PASSWORD               = 0x3011,
 933         WID_SITE_SURVEY_RESULTS         = 0x3012,
 934         WID_RX_POWER_LEVEL              = 0x3013,
 935         WID_DEL_ALL_RX_BA               = 0x3014,
 936         WID_SET_STA_MAC_INACTIVE_TIME   = 0x3017,
 937         WID_ADD_WEP_KEY                 = 0x3019,
 938         WID_REMOVE_WEP_KEY              = 0x301A,
 939         WID_ADD_PTK                     = 0x301B,
 940         WID_ADD_RX_GTK                  = 0x301C,
 941         WID_ADD_TX_GTK                  = 0x301D,
 942         WID_REMOVE_KEY                  = 0x301E,
 943         WID_ASSOC_REQ_INFO              = 0x301F,
 944         WID_ASSOC_RES_INFO              = 0x3020,
 945         WID_MANUFACTURER                = 0x3026, /*Added for CAPI tool */
 946         WID_MODEL_NAME                  = 0x3027, /*Added for CAPI tool */
 947         WID_MODEL_NUM                   = 0x3028, /*Added for CAPI tool */
 948         WID_DEVICE_NAME                 = 0x3029, /*Added for CAPI tool */
 949
 950         /* NMAC String WID list */
 951         WID_11N_P_ACTION_REQ            = 0x3080,
 952         WID_HUT_TEST_ID                 = 0x3081,
 953         WID_PMKID_INFO                  = 0x3082,
 954         WID_FIRMWARE_INFO               = 0x3083,
 955         WID_REGISTER_FRAME              = 0x3084,
 956         WID_DEL_ALL_STA                 = 0x3085,
 957         WID_REMAIN_ON_CHAN              = 0x3996,
 958         WID_SSID_PROBE_REQ              = 0x3997,
 959         WID_JOIN_REQ_EXTENDED           = 0x3998,
 960
 961         WID_IP_ADDRESS                  = 0x3999,
 962
 963         /* Custom String WID list */
 964
 965         /* EMAC Binary WID list */
 966         WID_UAPSD_CONFIG                = 0x4001,
 967         WID_UAPSD_STATUS                = 0x4002,
 968         WID_WMM_AP_AC_PARAMS            = 0x4003,
 969         WID_WMM_STA_AC_PARAMS           = 0x4004,
 970         WID_NETWORK_INFO                = 0x4005,
 971         WID_STA_JOIN_INFO               = 0x4006,
 972         WID_CONNECTED_STA_LIST          = 0x4007,
 973
 974         /* NMAC Binary WID list */
 975         WID_11N_AUTORATE_TABLE          = 0x4080,
 976
 977         WID_SCAN_CHANNEL_LIST           = 0x4084,
 978
 979         WID_INFO_ELEMENT_PROBE          = 0x4085,
 980         WID_INFO_ELEMENT_ASSOCIATE      = 0x4086,
 981         WID_ADD_STA                     = 0X4087,
 982         WID_REMOVE_STA                  = 0X4088,
 983         WID_EDIT_STA                    = 0X4089,
 984         WID_ADD_BEACON                  = 0x408a,
 985
 986         WID_SETUP_MULTICAST_FILTER      = 0x408b,
 987
 988         /* Miscellaneous WIDs */
 989         WID_ALL                         = 0x7FFE,
 990         WID_MAX                         = 0xFFFF
 991 } WID_T;
 992
 993 int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup);
 994
 995 void wilc_bus_set_max_speed(void);
 996 void wilc_bus_set_default_speed(void);
 997 u32 wilc_get_chipid(u8 update);
 998
 999 #endif