1 /* ////////////////////////////////////////////////////////////////////////// */
3 /* Copyright (c) Atmel Corporation. All rights reserved. */
5 /* Module Name: wilc_wlan_if.h */
8 /* ///////////////////////////////////////////////////////////////////////// */
11 #ifndef WILC_WLAN_IF_H
12 #define WILC_WLAN_IF_H
14 /*bug 3887: [AP] Allow Management frames to be passed to the host*/
15 #define WILC_AP_EXTERNAL_MLME
17 #define TCP_ENHANCEMENTS
18 /* #define MEMORY_STATIC */
19 /* #define WILC_FULLY_HOSTING_AP */
20 /* #define USE_OLD_SPI_SW */
23 #include "wilc_oswrapper.h"
24 #include "linux_wlan_common.h"
27 /********************************************
31 ********************************************/
33 #define N_INIT 0x00000001
34 #define N_ERR 0x00000002
35 #define N_TXQ 0x00000004
36 #define N_INTR 0x00000008
37 #define N_RXQ 0x00000010
39 /********************************************
41 * Host Interface Defines
43 ********************************************/
46 #define HIF_SPI BIT(0)
47 #define HIF_SDIO_GPIO_IRQ BIT(2)
50 /********************************************
52 * Tx/Rx Buffer Size Defines
54 ********************************************/
56 #define CE_TX_BUFFER_SIZE (64 * 1024)
57 #define CE_RX_BUFFER_SIZE (384 * 1024)
59 /********************************************
61 * Wlan Interface Defines
63 ********************************************/
66 uint32_t read_write: 1;
75 uint32_t read_write: 1;
77 uint32_t block_mode: 1;
78 uint32_t increment: 1;
87 void (*os_sleep)(uint32_t);
88 void (*os_atomic_sleep)(uint32_t);
89 void (*os_debug)(uint8_t *);
90 void *(*os_malloc)(uint32_t);
91 void *(*os_malloc_atomic)(uint32_t);
92 void (*os_free)(void *);
93 void (*os_lock)(void *);
94 void (*os_unlock)(void *);
95 int (*os_wait)(void *, u32);
96 void (*os_signal)(void *);
97 void (*os_enter_cs)(void *);
98 void (*os_leave_cs)(void *);
100 /*Added by Amr - BugID_4720*/
101 void (*os_spin_lock)(void *, unsigned long *);
102 void (*os_spin_unlock)(void *, unsigned long *);
104 } wilc_wlan_os_func_t;
108 int (*io_init)(void *);
109 void (*io_deinit)(void *);
112 int (*sdio_cmd52)(sdio_cmd52_t *);
113 int (*sdio_cmd53)(sdio_cmd53_t *);
114 int (*sdio_set_max_speed)(void);
115 int (*sdio_set_default_speed)(void);
118 int (*spi_max_speed)(void);
119 int (*spi_tx)(uint8_t *, uint32_t);
120 int (*spi_rx)(uint8_t *, uint32_t);
121 int (*spi_trx)(uint8_t *, uint8_t *, uint32_t);
124 } wilc_wlan_io_func_t;
127 void (*rx_indicate)(uint8_t *, uint32_t, uint32_t);
128 void (*rx_complete)(void);
129 } wilc_wlan_net_func_t;
132 void (*mac_indicate)(int);
133 } wilc_wlan_indicate_func_t;
134 #define WILC_MAC_INDICATE_STATUS 0x1
135 #define WILC_MAC_STATUS_INIT -1
136 #define WILC_MAC_STATUS_READY 0
137 #define WILC_MAC_STATUS_CONNECT 1
139 #define WILC_MAC_INDICATE_SCAN 0x2
144 void *hif_critical_section;
146 uint32_t tx_buffer_size;
147 void *txq_critical_section;
149 /*Added by Amr - BugID_4720*/
150 void *txq_add_to_head_critical_section;
153 void *txq_wait_event;
155 #if defined(MEMORY_STATIC)
156 uint32_t rx_buffer_size;
158 void *rxq_critical_section;
159 void *rxq_wait_event;
161 void *cfg_wait_event;
162 } wilc_wlan_os_context_t;
165 wilc_wlan_os_context_t os_context;
166 wilc_wlan_os_func_t os_func;
167 wilc_wlan_io_func_t io_func;
168 wilc_wlan_net_func_t net_func;
169 wilc_wlan_indicate_func_t indicate_func;
172 struct tx_complete_data {
173 #ifdef WILC_FULLY_HOSTING_AP
174 struct tx_complete_data *next;
183 typedef void (*wilc_tx_complete_func_t)(void *, int);
185 #define WILC_TX_ERR_NO_BUF (-2)
188 int (*wlan_firmware_download)(const uint8_t *, uint32_t);
189 int (*wlan_start)(void);
190 int (*wlan_stop)(void);
191 int (*wlan_add_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
192 int (*wlan_handle_tx_que)(uint32_t *);
193 void (*wlan_handle_rx_que)(void);
194 void (*wlan_handle_rx_isr)(void);
195 void (*wlan_cleanup)(void);
196 int (*wlan_cfg_set)(int, uint32_t, uint8_t *, uint32_t, int, uint32_t);
197 int (*wlan_cfg_get)(int, uint32_t, int, uint32_t);
198 int (*wlan_cfg_get_value)(uint32_t, uint8_t *, uint32_t);
199 /*Bug3959: transmitting mgmt frames received from host*/
200 #if defined(WILC_AP_EXTERNAL_MLME) || defined(WILC_P2P)
201 int (*wlan_add_mgmt_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
203 #ifdef WILC_FULLY_HOSTING_AP
204 int (*wlan_add_data_to_tx_que)(void *, uint8_t *, uint32_t, wilc_tx_complete_func_t);
210 /********************************************
212 * Wlan Configuration ID
214 ********************************************/
216 #define MAX_SSID_LEN 33
217 #define MAX_RATES_SUPPORTED 12
219 #define INFINITE_SLEEP_TIME ((u32)0xFFFFFFFF)
221 #ifdef WILC_PARSE_SCAN_IN_HOST
224 EXT_SUPP_RATES_IE = 50,
225 HT_CAPABILITY_IE = 45,
257 B_ONLY_MODE = 0, /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */
258 G_ONLY_MODE, /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */
259 G_MIXED_11B_1_MODE, /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */
260 G_MIXED_11B_2_MODE, /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */
261 } G_OPERATING_MODE_T;
264 G_SHORT_PREAMBLE = 0, /* Short Preamble */
265 G_LONG_PREAMBLE = 1, /* Long Preamble */
266 G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
269 #define MAC_CONNECTED 1
270 #define MAC_DISCONNECTED 0
273 #define SCAN_DONE TRUE
289 CHIP_SLEEPING_AUTO = 1,
290 CHIP_SLEEPING_MANUAL = 2
295 ACQUIRE_AND_WAKEUP = 1,
300 RELEASE_ALLOW_SLEEP = 1,
309 WPA_AES_TKIP = 0x69, /* Aes or Tkip */
312 WPA2_AES_TKIP = 0x71, /* Aes or Tkip */
324 SITE_SURVEY_ALL_CH = 1,
344 } RSNA_REKEY_POLICY_T;
348 FILTER_AP_ONLY = 0x01,
349 FILTER_STA_ONLY = 0x02
350 } SCAN_CLASS_FITLER_T;
353 PRI_HIGH_RSSI = 0x00,
359 CH_FILTER_OFF = 0x00,
364 AUTO_PROT = 0, /* Auto */
365 NO_PROT, /* Do not use any protection */
366 ERP_PROT, /* Protect all ERP frame exchanges */
367 HT_PROT, /* Protect all HT frame exchanges */
368 GF_PROT, /* Protect all GF frame exchanges */
369 } N_PROTECTION_MODE_T;
374 } G_PROTECTION_MODE_T;
379 HT_ONLY_20_40MHZ_MODE,
380 } N_OPERATING_MODE_T;
386 DETECT_PROTECT_REPORT = 3,
387 } N_OBSS_DETECTION_T;
390 RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */
391 FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
392 LSIG_TXOP_PROT, /* LSIG TXOP Protection */
393 FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */
394 } N_PROTECTION_TYPE_T;
399 MIMO_MODE = 3, /* power save disable */
421 WID_TYPE_FORCE_32BIT = 0xFFFFFFFF
423 } WID_TYPE_T, tenuWIDtype;
430 /* -------------------------------------------------------------- */
431 /* Configuration : Infrastructure Independent Access Point */
432 /* Values to set : 0 1 2 */
433 /* -------------------------------------------------------------- */
434 WID_BSS_TYPE = 0x0000,
437 /* -------------------------------------------------------------- */
438 /* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 */
439 /* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 */
440 /* -------------------------------------------------------------- */
441 WID_CURRENT_TX_RATE = 0x0001,
444 /* ------------------------------------------------------------------- */
445 /* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
446 /* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
447 /* -------------------------------------------------------------------- */
448 WID_CURRENT_CHANNEL = 0x0002,
451 /* -------------------------------------------------------------- */
452 /* Configuration : short long Auto */
453 /* Values to set : 0 1 2 */
454 /* -------------------------------------------------------------- */
455 WID_PREAMBLE = 0x0003,
457 /* 11g operating mode (ignored if 11g not present) */
458 /* -------------------------------------------------------------- */
459 /* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) */
460 /* Values to set : 1 2 3 */
461 /* -------------------------------------------------------------- */
462 WID_11G_OPERATING_MODE = 0x0004,
464 /* Mac status (response only) */
465 /* -------------------------------------------------------------- */
466 /* Configuration : disconnect connect */
467 /* Values to get : 0 1 */
468 /* -------------------------------------------------------------- */
472 /* -------------------------------------------------------------- */
473 /* Configuration : Passive Scanning Active Scanning */
474 /* Values to set : 0 1 */
475 /* -------------------------------------------------------------- */
476 WID_SCAN_TYPE = 0x0007,
478 /* Key Id (WEP default key Id) */
479 /* -------------------------------------------------------------- */
480 /* Configuration : Any value between 0 to 3 */
481 /* Values to set : Same value. Default is 0 */
482 /* -------------------------------------------------------------- */
486 /* -------------------------------------------------------------- */
487 /* Configuration : QoS Disable WMM Enable */
488 /* Values to set : 0 1 */
489 /* -------------------------------------------------------------- */
490 WID_QOS_ENABLE = 0x000A,
492 /* Power Management */
493 /* ------------------------------------------------------------------ */
494 /* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE */
495 /* Values to set : 0 1 2 */
496 /* ------------------------------------------------------------------ */
497 WID_POWER_MANAGEMENT = 0x000B,
499 /* WEP/802 11I Configuration */
500 /* ------------------------------------------------------------------ */
501 /* Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP */
502 /* Values (0x) : 00 03 07 29 49 31 51 */
504 /* Configuration : WPA-AES+TKIP RSN-AES+TKIP */
505 /* Values (0x) : 69 71 */
506 /* ------------------------------------------------------------------ */
507 WID_11I_MODE = 0x000C,
509 /* WEP Configuration: Used in BSS STA mode only when WEP is enabled */
510 /* ------------------------------------------------------------------ */
511 /* Configuration : Open System Shared Key Any Type | 802.1x Auth */
512 /* Values (0x) : 01 02 03 | BIT2 */
513 /* ------------------------------------------------------------------ */
514 WID_AUTH_TYPE = 0x000D,
516 /* Site Survey Type */
517 /* -------------------------------------------------------------- */
518 /* Configuration : Values to set */
519 /* Survey 1 Channel : 0 */
520 /* survey all Channels : 1 */
521 /* Disable Site Survey : 2 */
522 /* -------------------------------------------------------------- */
523 WID_SITE_SURVEY = 0x000E,
525 /* Listen Interval */
526 /* -------------------------------------------------------------- */
527 /* Configuration : Any value between 1 to 255 */
528 /* Values to set : Same value. Default is 3 */
529 /* -------------------------------------------------------------- */
530 WID_LISTEN_INTERVAL = 0x000F,
533 /* -------------------------------------------------------------- */
534 /* Configuration : Any value between 1 to 255 */
535 /* Values to set : Same value. Default is 3 */
536 /* -------------------------------------------------------------- */
537 WID_DTIM_PERIOD = 0x0010,
540 /* -------------------------------------------------------------- */
541 /* Configuration : Normal Ack No Ack */
542 /* Values to set : 0 1 */
543 /* -------------------------------------------------------------- */
544 WID_ACK_POLICY = 0x0011,
546 /* Reset MAC (Set only) */
547 /* -------------------------------------------------------------- */
548 /* Configuration : Don't Reset Reset No Request */
549 /* Values to set : 0 1 2 */
550 /* -------------------------------------------------------------- */
553 /* Broadcast SSID Option: Setting this will adhere to "" SSID element */
554 /* ------------------------------------------------------------------ */
555 /* Configuration : Enable Disable */
556 /* Values to set : 1 0 */
557 /* ------------------------------------------------------------------ */
558 WID_BCAST_SSID = 0x0015,
560 /* Disconnect (Station) */
561 /* ------------------------------------------------------------------ */
562 /* Configuration : Association ID */
563 /* Values to set : Association ID */
564 /* ------------------------------------------------------------------ */
565 WID_DISCONNECT = 0x0016,
567 /* 11a Tx Power Level */
568 /* -------------------------------------------------------------------- */
569 /* Configuration : Sets TX Power (Higher the value greater the power) */
570 /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
571 /* -------------------------------------------------------------------- */
572 WID_TX_POWER_LEVEL_11A = 0x0018,
574 /* Group Key Update Policy Selection */
575 /* -------------------------------------------------------------------- */
576 /* Configuration : Disabled timeBased packetBased timePacketBased */
577 /* Values to set : 1 2 3 4 */
578 /* -------------------------------------------------------------------- */
579 WID_REKEY_POLICY = 0x0019,
581 /* Allow Short Slot */
582 /* -------------------------------------------------------------- */
583 /* Configuration : Disallow Short Slot Allow Short Slot */
584 /* (Enable Only Long Slot) (Enable Short Slot if applicable)*/
585 /* Values to set : 0 1 */
586 /* -------------------------------------------------------------- */
587 WID_SHORT_SLOT_ALLOWED = 0x001A,
589 WID_PHY_ACTIVE_REG = 0x001B,
591 /* 11b Tx Power Level */
592 /* -------------------------------------------------------------------- */
593 /* Configuration : Sets TX Power (Higher the value greater the power) */
594 /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
595 /* -------------------------------------------------------------------- */
596 WID_TX_POWER_LEVEL_11B = 0x001D,
599 /* -------------------------------------------------------------------- */
600 /* Configuration : Request default scan */
601 /* Values to set : 0 */
602 /* -------------------------------------------------------------------- */
603 WID_START_SCAN_REQ = 0x001E,
605 /* Rssi (get only) */
606 /* -------------------------------------------------------------------- */
607 /* Configuration : */
608 /* Values to get : Rssi value */
609 /* -------------------------------------------------------------------- */
613 /* -------------------------------------------------------------------- */
614 /* Configuration : Request to join */
615 /* Values to set : index of scan result */
616 /* -------------------------------------------------------------------- */
617 WID_JOIN_REQ = 0x0020,
619 WID_LINKSPEED = 0x0026,
621 /* Enable User Control of TX Power */
622 /* -------------------------------------------------------------------- */
623 /* Configuration : Disable Enable */
624 /* Values to set : 0 1 */
625 /* -------------------------------------------------------------------- */
626 WID_USER_CONTROL_ON_TX_POWER = 0x0027,
628 WID_MEMORY_ACCESS_8BIT = 0x0029,
630 /* Enable Auto RX Sensitivity feature */
631 /* -------------------------------------------------------------------- */
632 /* Configuration : Disable Enable */
633 /* Values to set : 0 1 */
634 /* -------------------------------------------------------------------- */
635 WID_AUTO_RX_SENSITIVITY = 0x0032,
637 /* Receive Buffer Based Ack */
638 /* -------------------------------------------------------------------- */
639 /* Configuration : Disable Enable */
640 /* Values to set : 0 1 */
641 /* -------------------------------------------------------------------- */
642 WID_DATAFLOW_CONTROL = 0x0033,
645 /* -------------------------------------------------------------------- */
646 /* Configuration : Class No filter AP only Station Only */
647 /* Values to set : 0 1 2 */
648 /* Configuration : Priority High Rssi Low Rssi Detect */
649 /* Values to set : 0 0x4 0x08 */
650 /* Configuration : Channel filter off filter on */
651 /* Values to set : 0 0x10 */
652 /* -------------------------------------------------------------------- */
653 WID_SCAN_FILTER = 0x0036,
655 /* Link Loss Threshold (measure in the beacon period) */
656 /* -------------------------------------------------------------------- */
657 /* Configuration : Any value between 10 and 254 (Set to 255 to disable it) */
658 /* Values to set : Same value. Default is 10 */
659 /* -------------------------------------------------------------------- */
660 WID_LINK_LOSS_THRESHOLD = 0x0037,
663 WID_ABORT_RUNNING_SCAN = 0x003E,
665 /* NMAC Character WID list */
666 WID_WPS_START = 0x0043,
668 /* Protection mode for MAC */
669 /* -------------------------------------------------------------- */
670 /* Configuration : Auto No protection ERP HT GF */
671 /* Values to set : 0 1 2 3 4 */
672 /* -------------------------------------------------------------- */
673 WID_11N_PROT_MECH = 0x0080,
675 /* ERP Protection type for MAC */
676 /* -------------------------------------------------------------- */
677 /* Configuration : Self-CTS RTS-CTS */
678 /* Values to set : 0 1 */
679 /* -------------------------------------------------------------- */
680 WID_11N_ERP_PROT_TYPE = 0x0081,
682 /* HT Option Enable */
683 /* -------------------------------------------------------------- */
684 /* Configuration : HT Enable HT Disable */
685 /* Values to set : 1 0 */
686 /* -------------------------------------------------------------- */
687 WID_11N_ENABLE = 0x0082,
689 /* 11n Operating mode (Note that 11g operating mode will also be */
690 /* used in addition to this, if this is set to HT Mixed mode) */
691 /* -------------------------------------------------------------- */
692 /* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz */
693 /* Values to set : 1 2 3 */
694 /* -------------------------------------------------------------- */
695 WID_11N_OPERATING_MODE = 0x0083,
697 /* 11n OBSS non-HT STA Detection flag */
698 /* -------------------------------------------------------------- */
699 /* Configuration : Do not detect */
700 /* Values to set : 0 */
701 /* Configuration : Detect, do not protect or report */
702 /* Values to set : 1 */
703 /* Configuration : Detect, protect and do not report */
704 /* Values to set : 2 */
705 /* Configuration : Detect, protect and report to other BSS */
706 /* Values to set : 3 */
707 /* -------------------------------------------------------------- */
708 WID_11N_OBSS_NONHT_DETECTION = 0x0084,
710 /* 11n HT Protection Type */
711 /* -------------------------------------------------------------- */
712 /* Configuration : RTS-CTS First Frame Exchange at non-HT-rate */
713 /* Values to set : 0 1 */
714 /* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt */
715 /* Values to set : 2 3 */
716 /* -------------------------------------------------------------- */
717 WID_11N_HT_PROT_TYPE = 0x0085,
719 /* 11n RIFS Protection Enable Flag */
720 /* -------------------------------------------------------------- */
721 /* Configuration : Disable Enable */
722 /* Values to set : 0 1 */
723 /* -------------------------------------------------------------- */
724 WID_11N_RIFS_PROT_ENABLE = 0x0086,
727 /* -------------------------------------------------------------- */
728 /* Configuration : Static Dynamic MIMO (Power Save Disabled) */
729 /* Values to set : 1 2 3 */
730 /* -------------------------------------------------------------- */
731 WID_11N_SMPS_MODE = 0x0087,
733 /* Current transmit MCS */
734 /* -------------------------------------------------------------- */
735 /* Configuration : MCS Index for data rate */
736 /* Values to set : 0 to 7 */
737 /* -------------------------------------------------------------- */
738 WID_11N_CURRENT_TX_MCS = 0x0088,
740 WID_11N_PRINT_STATS = 0x0089,
742 /* 11n Short GI Enable Flag */
743 /* -------------------------------------------------------------- */
744 /* Configuration : Disable Enable */
745 /* Values to set : 0 1 */
746 /* -------------------------------------------------------------- */
747 WID_11N_SHORT_GI_ENABLE = 0x008D,
749 /* 11n RIFS Enable Flag */
750 /* -------------------------------------------------------------- */
751 /* Configuration : Disable Enable */
752 /* Values to set : 0 1 */
753 /* -------------------------------------------------------------- */
754 WID_RIFS_MODE = 0x0094,
756 /* TX Abort Feature */
757 /* -------------------------------------------------------------- */
758 /* Configuration : Disable Self CTS Enable Self CTS */
759 /* Values to set : 0 1 */
760 /* Configuration : Disable TX Abort Enable TX Abort */
761 /* Values to set : 2 3 */
762 /* Configuration : Enable HW TX Abort Enable SW TX Abort */
763 /* Values to set : 4 5 */
764 /* -------------------------------------------------------------- */
765 WID_TX_ABORT_CONFIG = 0x00A1,
767 WID_REG_TSSI_11B_VALUE = 0x00A6,
768 WID_REG_TSSI_11G_VALUE = 0x00A7,
769 WID_REG_TSSI_11N_VALUE = 0x00A8,
770 WID_TX_CALIBRATION = 0x00A9,
771 WID_DSCR_TSSI_11B_VALUE = 0x00AA,
772 WID_DSCR_TSSI_11G_VALUE = 0x00AB,
773 WID_DSCR_TSSI_11N_VALUE = 0x00AC,
775 /* Immediate Block-Ack Support */
776 /* -------------------------------------------------------------- */
777 /* Configuration : Disable Enable */
778 /* Values to set : 0 1 */
779 /* -------------------------------------------------------------- */
780 WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
782 /* TXOP Disable Flag */
783 /* -------------------------------------------------------------- */
784 /* Configuration : Disable Enable */
785 /* Values to set : 1 0 */
786 /* -------------------------------------------------------------- */
787 WID_11N_TXOP_PROT_DISABLE = 0x00B0,
790 WID_TX_POWER_LEVEL_11N = 0x00B1,
792 /* Custom Character WID list */
793 WID_PC_TEST_MODE = 0x00C8,
795 /* SCAN Complete notification WID*/
796 WID_SCAN_COMPLETE = 0x00C9,
798 #ifdef WILC_AP_EXTERNAL_MLME
799 WID_DEL_BEACON = 0x00CA,
802 WID_LOGTerminal_Switch = 0x00CD,
803 /* EMAC Short WID list */
805 /* -------------------------------------------------------------- */
806 /* Configuration : Any value between 256 to 2347 */
807 /* Values to set : Same value. Default is 2347 */
808 /* -------------------------------------------------------------- */
809 WID_RTS_THRESHOLD = 0x1000,
811 /* Fragmentation Threshold */
812 /* -------------------------------------------------------------- */
813 /* Configuration : Any value between 256 to 2346 */
814 /* Values to set : Same value. Default is 2346 */
815 /* -------------------------------------------------------------- */
816 WID_FRAG_THRESHOLD = 0x1001,
818 WID_SHORT_RETRY_LIMIT = 0x1002,
819 WID_LONG_RETRY_LIMIT = 0x1003,
820 WID_BEACON_INTERVAL = 0x1006,
821 WID_MEMORY_ACCESS_16BIT = 0x1008,
822 WID_RX_SENSE = 0x100B,
823 WID_ACTIVE_SCAN_TIME = 0x100C,
824 WID_PASSIVE_SCAN_TIME = 0x100D,
826 WID_SITE_SURVEY_SCAN_TIME = 0x100E,
827 WID_JOIN_START_TIMEOUT = 0x100F,
828 WID_AUTH_TIMEOUT = 0x1010,
829 WID_ASOC_TIMEOUT = 0x1011,
830 WID_11I_PROTOCOL_TIMEOUT = 0x1012,
831 WID_EAPOL_RESPONSE_TIMEOUT = 0x1013,
833 /* NMAC Short WID list */
834 WID_11N_SIG_QUAL_VAL = 0x1085,
835 WID_CCA_THRESHOLD = 0x1087,
837 /* Custom Short WID list */
839 /* EMAC Integer WID list */
840 WID_FAILED_COUNT = 0x2000,
841 WID_RETRY_COUNT = 0x2001,
842 WID_MULTIPLE_RETRY_COUNT = 0x2002,
843 WID_FRAME_DUPLICATE_COUNT = 0x2003,
844 WID_ACK_FAILURE_COUNT = 0x2004,
845 WID_RECEIVED_FRAGMENT_COUNT = 0x2005,
846 WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006,
847 WID_FCS_ERROR_COUNT = 0x2007,
848 WID_SUCCESS_FRAME_COUNT = 0x2008,
849 WID_HUT_TX_COUNT = 0x200A,
850 WID_TX_FRAGMENT_COUNT = 0x200B,
851 WID_TX_MULTICAST_FRAME_COUNT = 0x200C,
852 WID_RTS_SUCCESS_COUNT = 0x200D,
853 WID_RTS_FAILURE_COUNT = 0x200E,
854 WID_WEP_UNDECRYPTABLE_COUNT = 0x200F,
855 WID_REKEY_PERIOD = 0x2010,
856 WID_REKEY_PACKET_COUNT = 0x2011,
857 WID_1X_SERV_ADDR = 0x2012,
858 WID_STACK_IP_ADDR = 0x2013,
859 WID_STACK_NETMASK_ADDR = 0x2014,
860 WID_HW_RX_COUNT = 0x2015,
861 WID_MEMORY_ADDRESS = 0x201E,
862 WID_MEMORY_ACCESS_32BIT = 0x201F,
863 WID_RF_REG_VAL = 0x2021,
866 /* NMAC Integer WID list */
867 WID_11N_PHY_ACTIVE_REG_VAL = 0x2080,
869 /* Custom Integer WID list */
870 WID_GET_INACTIVE_TIME = 0x2084,
871 WID_SET_DRV_HANDLER = 0X2085,
872 WID_SET_OPERATION_MODE = 0X2086,
873 /* EMAC String WID list */
875 WID_FIRMWARE_VERSION = 0x3001,
876 WID_OPERATIONAL_RATE_SET = 0x3002,
878 WID_WEP_KEY_VALUE = 0x3004,
879 WID_11I_PSK = 0x3008,
880 WID_11E_P_ACTION_REQ = 0x3009,
882 WID_HARDWARE_VERSION = 0x300B,
883 WID_MAC_ADDR = 0x300C,
884 WID_HUT_DEST_ADDR = 0x300D,
885 WID_PHY_VERSION = 0x300F,
886 WID_SUPP_USERNAME = 0x3010,
887 WID_SUPP_PASSWORD = 0x3011,
888 WID_SITE_SURVEY_RESULTS = 0x3012,
889 WID_RX_POWER_LEVEL = 0x3013,
890 WID_DEL_ALL_RX_BA = 0x3014,
891 WID_SET_STA_MAC_INACTIVE_TIME = 0x3017,
892 WID_ADD_WEP_KEY = 0x3019,
893 WID_REMOVE_WEP_KEY = 0x301A,
894 WID_ADD_PTK = 0x301B,
895 WID_ADD_RX_GTK = 0x301C,
896 WID_ADD_TX_GTK = 0x301D,
897 WID_REMOVE_KEY = 0x301E,
898 WID_ASSOC_REQ_INFO = 0x301F,
899 WID_ASSOC_RES_INFO = 0x3020,
900 WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */
901 WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
902 WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
903 WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
905 /* NMAC String WID list */
906 WID_11N_P_ACTION_REQ = 0x3080,
907 WID_HUT_TEST_ID = 0x3081,
908 WID_PMKID_INFO = 0x3082,
909 WID_FIRMWARE_INFO = 0x3083,
911 WID_REGISTER_FRAME = 0x3084,
913 WID_DEL_ALL_STA = 0x3085,
915 WID_REMAIN_ON_CHAN = 0x3996,
918 WID_SSID_PROBE_REQ = 0x3997,
919 /*BugID_4124 WID to trigger modified Join Request using SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)*/
920 WID_JOIN_REQ_EXTENDED = 0x3998,
922 /* BugID 4951: WID toset IP address in firmware */
923 WID_IP_ADDRESS = 0x3999,
927 /* Custom String WID list */
929 /* EMAC Binary WID list */
930 WID_UAPSD_CONFIG = 0x4001,
931 WID_UAPSD_STATUS = 0x4002,
932 WID_WMM_AP_AC_PARAMS = 0x4003,
933 WID_WMM_STA_AC_PARAMS = 0x4004,
934 WID_NETWORK_INFO = 0x4005,
935 WID_STA_JOIN_INFO = 0x4006,
936 WID_CONNECTED_STA_LIST = 0x4007,
938 /* NMAC Binary WID list */
939 WID_11N_AUTORATE_TABLE = 0x4080,
942 /*Added here by Amr - BugID 4134*/
943 WID_SCAN_CHANNEL_LIST = 0x4084,
945 /*BugID_3746 WID to add IE to be added in next probe request*/
946 WID_INFO_ELEMENT_PROBE = 0x4085,
947 /*BugID_3746 WID to add IE to be added in next associate request*/
948 WID_INFO_ELEMENT_ASSOCIATE = 0x4086,
949 WID_ADD_STA = 0X4087,
950 WID_REMOVE_STA = 0X4088,
951 WID_EDIT_STA = 0X4089,
952 WID_ADD_BEACON = 0x408a,
955 WID_SETUP_MULTICAST_FILTER = 0x408b,
957 /* Miscellaneous WIDs */
962 int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup);
964 void wilc_bus_set_max_speed(void);
965 void wilc_bus_set_default_speed(void);
966 uint32_t wilc_get_chipid(uint8_t update);