1 /* ////////////////////////////////////////////////////////////////////////// */
3 /* Copyright (c) Atmel Corporation. All rights reserved. */
5 /* Module Name: wilc_wlan_if.h */
8 /* ///////////////////////////////////////////////////////////////////////// */
11 #ifndef WILC_WLAN_IF_H
12 #define WILC_WLAN_IF_H
14 /*bug 3887: [AP] Allow Management frames to be passed to the host*/
15 #define WILC_AP_EXTERNAL_MLME
17 #define TCP_ENHANCEMENTS
18 /* #define MEMORY_STATIC */
19 /* #define USE_OLD_SPI_SW */
22 #include "wilc_oswrapper.h"
23 #include "linux_wlan_common.h"
26 /********************************************
30 ********************************************/
32 #define N_INIT 0x00000001
33 #define N_ERR 0x00000002
34 #define N_TXQ 0x00000004
35 #define N_INTR 0x00000008
36 #define N_RXQ 0x00000010
38 /********************************************
40 * Host Interface Defines
42 ********************************************/
45 #define HIF_SPI BIT(0)
46 #define HIF_SDIO_GPIO_IRQ BIT(2)
49 /********************************************
51 * Tx/Rx Buffer Size Defines
53 ********************************************/
55 #define CE_TX_BUFFER_SIZE (64 * 1024)
56 #define CE_RX_BUFFER_SIZE (384 * 1024)
58 /********************************************
60 * Wlan Interface Defines
62 ********************************************/
86 void (*os_debug)(u8 *);
87 int (*os_wait)(void *, u32);
88 } wilc_wlan_os_func_t;
92 int (*io_init)(void *);
93 void (*io_deinit)(void *);
96 int (*sdio_cmd52)(sdio_cmd52_t *);
97 int (*sdio_cmd53)(sdio_cmd53_t *);
98 int (*sdio_set_max_speed)(void);
99 int (*sdio_set_default_speed)(void);
102 int (*spi_max_speed)(void);
103 int (*spi_tx)(u8 *, u32);
104 int (*spi_rx)(u8 *, u32);
105 int (*spi_trx)(u8 *, u8 *, u32);
108 } wilc_wlan_io_func_t;
111 void (*rx_indicate)(u8 *, u32, u32);
112 void (*rx_complete)(void);
113 } wilc_wlan_net_func_t;
116 void (*mac_indicate)(int);
117 } wilc_wlan_indicate_func_t;
118 #define WILC_MAC_INDICATE_STATUS 0x1
119 #define WILC_MAC_STATUS_INIT -1
120 #define WILC_MAC_STATUS_READY 0
121 #define WILC_MAC_STATUS_CONNECT 1
123 #define WILC_MAC_INDICATE_SCAN 0x2
128 struct mutex *hif_critical_section;
131 void *txq_critical_section;
133 /*Added by Amr - BugID_4720*/
134 void *txq_add_to_head_critical_section;
137 void *txq_wait_event;
139 #if defined(MEMORY_STATIC)
142 void *rxq_critical_section;
143 void *rxq_wait_event;
145 struct semaphore *cfg_wait_event;
146 } wilc_wlan_os_context_t;
149 wilc_wlan_os_context_t os_context;
150 wilc_wlan_os_func_t os_func;
151 wilc_wlan_io_func_t io_func;
152 wilc_wlan_net_func_t net_func;
153 wilc_wlan_indicate_func_t indicate_func;
156 struct tx_complete_data {
164 typedef void (*wilc_tx_complete_func_t)(void *, int);
166 #define WILC_TX_ERR_NO_BUF (-2)
169 int (*wlan_firmware_download)(const u8 *, u32);
170 int (*wlan_start)(void);
171 int (*wlan_stop)(void);
172 int (*wlan_add_to_tx_que)(void *, u8 *, u32, wilc_tx_complete_func_t);
173 int (*wlan_handle_tx_que)(u32 *);
174 void (*wlan_handle_rx_que)(void);
175 void (*wlan_handle_rx_isr)(void);
176 void (*wlan_cleanup)(void);
177 int (*wlan_cfg_set)(int, u32, u8 *, u32, int, u32);
178 int (*wlan_cfg_get)(int, u32, int, u32);
179 int (*wlan_cfg_get_value)(u32, u8 *, u32);
180 /*Bug3959: transmitting mgmt frames received from host*/
181 #if defined(WILC_AP_EXTERNAL_MLME) || defined(WILC_P2P)
182 int (*wlan_add_mgmt_to_tx_que)(void *, u8 *, u32, wilc_tx_complete_func_t);
186 /********************************************
188 * Wlan Configuration ID
190 ********************************************/
192 #define MAX_SSID_LEN 33
193 #define MAX_RATES_SUPPORTED 12
195 #define INFINITE_SLEEP_TIME ((u32)0xFFFFFFFF)
197 #ifdef WILC_PARSE_SCAN_IN_HOST
200 EXT_SUPP_RATES_IE = 50,
201 HT_CAPABILITY_IE = 45,
233 B_ONLY_MODE = 0, /* basic rate: 1, 2 Mbps, otherwise: 5, 11 Mbps */
234 G_ONLY_MODE, /* basic rate: 6, 12, 24 Mbps, otherwise: 9, 18, 36, 48, 54 Mbps */
235 G_MIXED_11B_1_MODE, /* basic rate: 1, 2, 5.5, 11 Mbps, otherwise: all on */
236 G_MIXED_11B_2_MODE, /* basic rate: 1, 2, 5, 11, 6, 12, 24 Mbps, otherwise: all on */
237 } G_OPERATING_MODE_T;
240 G_SHORT_PREAMBLE = 0, /* Short Preamble */
241 G_LONG_PREAMBLE = 1, /* Long Preamble */
242 G_AUTO_PREAMBLE = 2, /* Auto Preamble Selection */
245 #define MAC_CONNECTED 1
246 #define MAC_DISCONNECTED 0
249 #define SCAN_DONE TRUE
265 CHIP_SLEEPING_AUTO = 1,
266 CHIP_SLEEPING_MANUAL = 2
271 ACQUIRE_AND_WAKEUP = 1,
276 RELEASE_ALLOW_SLEEP = 1,
285 WPA_AES_TKIP = 0x69, /* Aes or Tkip */
288 WPA2_AES_TKIP = 0x71, /* Aes or Tkip */
300 SITE_SURVEY_ALL_CH = 1,
320 } RSNA_REKEY_POLICY_T;
324 FILTER_AP_ONLY = 0x01,
325 FILTER_STA_ONLY = 0x02
326 } SCAN_CLASS_FITLER_T;
329 PRI_HIGH_RSSI = 0x00,
335 CH_FILTER_OFF = 0x00,
340 AUTO_PROT = 0, /* Auto */
341 NO_PROT, /* Do not use any protection */
342 ERP_PROT, /* Protect all ERP frame exchanges */
343 HT_PROT, /* Protect all HT frame exchanges */
344 GF_PROT, /* Protect all GF frame exchanges */
345 } N_PROTECTION_MODE_T;
350 } G_PROTECTION_MODE_T;
355 HT_ONLY_20_40MHZ_MODE,
356 } N_OPERATING_MODE_T;
362 DETECT_PROTECT_REPORT = 3,
363 } N_OBSS_DETECTION_T;
366 RTS_CTS_NONHT_PROT = 0, /* RTS-CTS at non-HT rate */
367 FIRST_FRAME_NONHT_PROT, /* First frame at non-HT rate */
368 LSIG_TXOP_PROT, /* LSIG TXOP Protection */
369 FIRST_FRAME_MIXED_PROT, /* First frame at Mixed format */
370 } N_PROTECTION_TYPE_T;
375 MIMO_MODE = 3, /* power save disable */
397 WID_TYPE_FORCE_32BIT = 0xFFFFFFFF
399 } WID_TYPE_T, tenuWIDtype;
406 /* -------------------------------------------------------------- */
407 /* Configuration : Infrastructure Independent Access Point */
408 /* Values to set : 0 1 2 */
409 /* -------------------------------------------------------------- */
410 WID_BSS_TYPE = 0x0000,
413 /* -------------------------------------------------------------- */
414 /* Configuration : 1 2 5.5 11 6 9 12 18 24 36 48 54 */
415 /* Values to set : 1 2 5 11 6 9 12 18 24 36 48 54 */
416 /* -------------------------------------------------------------- */
417 WID_CURRENT_TX_RATE = 0x0001,
420 /* ------------------------------------------------------------------- */
421 /* Configuration(g) : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
422 /* Values to set : 1 2 3 4 5 6 7 8 9 10 11 12 13 14 */
423 /* -------------------------------------------------------------------- */
424 WID_CURRENT_CHANNEL = 0x0002,
427 /* -------------------------------------------------------------- */
428 /* Configuration : short long Auto */
429 /* Values to set : 0 1 2 */
430 /* -------------------------------------------------------------- */
431 WID_PREAMBLE = 0x0003,
433 /* 11g operating mode (ignored if 11g not present) */
434 /* -------------------------------------------------------------- */
435 /* Configuration : HighPerf Compat(RSet #1) Compat(RSet #2) */
436 /* Values to set : 1 2 3 */
437 /* -------------------------------------------------------------- */
438 WID_11G_OPERATING_MODE = 0x0004,
440 /* Mac status (response only) */
441 /* -------------------------------------------------------------- */
442 /* Configuration : disconnect connect */
443 /* Values to get : 0 1 */
444 /* -------------------------------------------------------------- */
448 /* -------------------------------------------------------------- */
449 /* Configuration : Passive Scanning Active Scanning */
450 /* Values to set : 0 1 */
451 /* -------------------------------------------------------------- */
452 WID_SCAN_TYPE = 0x0007,
454 /* Key Id (WEP default key Id) */
455 /* -------------------------------------------------------------- */
456 /* Configuration : Any value between 0 to 3 */
457 /* Values to set : Same value. Default is 0 */
458 /* -------------------------------------------------------------- */
462 /* -------------------------------------------------------------- */
463 /* Configuration : QoS Disable WMM Enable */
464 /* Values to set : 0 1 */
465 /* -------------------------------------------------------------- */
466 WID_QOS_ENABLE = 0x000A,
468 /* Power Management */
469 /* ------------------------------------------------------------------ */
470 /* Configuration : NO_POWERSAVE MIN_POWERSAVE MAX_POWERSAVE */
471 /* Values to set : 0 1 2 */
472 /* ------------------------------------------------------------------ */
473 WID_POWER_MANAGEMENT = 0x000B,
475 /* WEP/802 11I Configuration */
476 /* ------------------------------------------------------------------ */
477 /* Configuration : Disable WP40 WP104 WPA-AES WPA-TKIP RSN-AES RSN-TKIP */
478 /* Values (0x) : 00 03 07 29 49 31 51 */
480 /* Configuration : WPA-AES+TKIP RSN-AES+TKIP */
481 /* Values (0x) : 69 71 */
482 /* ------------------------------------------------------------------ */
483 WID_11I_MODE = 0x000C,
485 /* WEP Configuration: Used in BSS STA mode only when WEP is enabled */
486 /* ------------------------------------------------------------------ */
487 /* Configuration : Open System Shared Key Any Type | 802.1x Auth */
488 /* Values (0x) : 01 02 03 | BIT2 */
489 /* ------------------------------------------------------------------ */
490 WID_AUTH_TYPE = 0x000D,
492 /* Site Survey Type */
493 /* -------------------------------------------------------------- */
494 /* Configuration : Values to set */
495 /* Survey 1 Channel : 0 */
496 /* survey all Channels : 1 */
497 /* Disable Site Survey : 2 */
498 /* -------------------------------------------------------------- */
499 WID_SITE_SURVEY = 0x000E,
501 /* Listen Interval */
502 /* -------------------------------------------------------------- */
503 /* Configuration : Any value between 1 to 255 */
504 /* Values to set : Same value. Default is 3 */
505 /* -------------------------------------------------------------- */
506 WID_LISTEN_INTERVAL = 0x000F,
509 /* -------------------------------------------------------------- */
510 /* Configuration : Any value between 1 to 255 */
511 /* Values to set : Same value. Default is 3 */
512 /* -------------------------------------------------------------- */
513 WID_DTIM_PERIOD = 0x0010,
516 /* -------------------------------------------------------------- */
517 /* Configuration : Normal Ack No Ack */
518 /* Values to set : 0 1 */
519 /* -------------------------------------------------------------- */
520 WID_ACK_POLICY = 0x0011,
522 /* Reset MAC (Set only) */
523 /* -------------------------------------------------------------- */
524 /* Configuration : Don't Reset Reset No Request */
525 /* Values to set : 0 1 2 */
526 /* -------------------------------------------------------------- */
529 /* Broadcast SSID Option: Setting this will adhere to "" SSID element */
530 /* ------------------------------------------------------------------ */
531 /* Configuration : Enable Disable */
532 /* Values to set : 1 0 */
533 /* ------------------------------------------------------------------ */
534 WID_BCAST_SSID = 0x0015,
536 /* Disconnect (Station) */
537 /* ------------------------------------------------------------------ */
538 /* Configuration : Association ID */
539 /* Values to set : Association ID */
540 /* ------------------------------------------------------------------ */
541 WID_DISCONNECT = 0x0016,
543 /* 11a Tx Power Level */
544 /* -------------------------------------------------------------------- */
545 /* Configuration : Sets TX Power (Higher the value greater the power) */
546 /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
547 /* -------------------------------------------------------------------- */
548 WID_TX_POWER_LEVEL_11A = 0x0018,
550 /* Group Key Update Policy Selection */
551 /* -------------------------------------------------------------------- */
552 /* Configuration : Disabled timeBased packetBased timePacketBased */
553 /* Values to set : 1 2 3 4 */
554 /* -------------------------------------------------------------------- */
555 WID_REKEY_POLICY = 0x0019,
557 /* Allow Short Slot */
558 /* -------------------------------------------------------------- */
559 /* Configuration : Disallow Short Slot Allow Short Slot */
560 /* (Enable Only Long Slot) (Enable Short Slot if applicable)*/
561 /* Values to set : 0 1 */
562 /* -------------------------------------------------------------- */
563 WID_SHORT_SLOT_ALLOWED = 0x001A,
565 WID_PHY_ACTIVE_REG = 0x001B,
567 /* 11b Tx Power Level */
568 /* -------------------------------------------------------------------- */
569 /* Configuration : Sets TX Power (Higher the value greater the power) */
570 /* Values to set : Any value between 0 and 63 (inclusive; Default is 48)*/
571 /* -------------------------------------------------------------------- */
572 WID_TX_POWER_LEVEL_11B = 0x001D,
575 /* -------------------------------------------------------------------- */
576 /* Configuration : Request default scan */
577 /* Values to set : 0 */
578 /* -------------------------------------------------------------------- */
579 WID_START_SCAN_REQ = 0x001E,
581 /* Rssi (get only) */
582 /* -------------------------------------------------------------------- */
583 /* Configuration : */
584 /* Values to get : Rssi value */
585 /* -------------------------------------------------------------------- */
589 /* -------------------------------------------------------------------- */
590 /* Configuration : Request to join */
591 /* Values to set : index of scan result */
592 /* -------------------------------------------------------------------- */
593 WID_JOIN_REQ = 0x0020,
595 WID_LINKSPEED = 0x0026,
597 /* Enable User Control of TX Power */
598 /* -------------------------------------------------------------------- */
599 /* Configuration : Disable Enable */
600 /* Values to set : 0 1 */
601 /* -------------------------------------------------------------------- */
602 WID_USER_CONTROL_ON_TX_POWER = 0x0027,
604 WID_MEMORY_ACCESS_8BIT = 0x0029,
606 /* Enable Auto RX Sensitivity feature */
607 /* -------------------------------------------------------------------- */
608 /* Configuration : Disable Enable */
609 /* Values to set : 0 1 */
610 /* -------------------------------------------------------------------- */
611 WID_AUTO_RX_SENSITIVITY = 0x0032,
613 /* Receive Buffer Based Ack */
614 /* -------------------------------------------------------------------- */
615 /* Configuration : Disable Enable */
616 /* Values to set : 0 1 */
617 /* -------------------------------------------------------------------- */
618 WID_DATAFLOW_CONTROL = 0x0033,
621 /* -------------------------------------------------------------------- */
622 /* Configuration : Class No filter AP only Station Only */
623 /* Values to set : 0 1 2 */
624 /* Configuration : Priority High Rssi Low Rssi Detect */
625 /* Values to set : 0 0x4 0x08 */
626 /* Configuration : Channel filter off filter on */
627 /* Values to set : 0 0x10 */
628 /* -------------------------------------------------------------------- */
629 WID_SCAN_FILTER = 0x0036,
631 /* Link Loss Threshold (measure in the beacon period) */
632 /* -------------------------------------------------------------------- */
633 /* Configuration : Any value between 10 and 254 (Set to 255 to disable it) */
634 /* Values to set : Same value. Default is 10 */
635 /* -------------------------------------------------------------------- */
636 WID_LINK_LOSS_THRESHOLD = 0x0037,
639 WID_ABORT_RUNNING_SCAN = 0x003E,
641 /* NMAC Character WID list */
642 WID_WPS_START = 0x0043,
644 /* Protection mode for MAC */
645 /* -------------------------------------------------------------- */
646 /* Configuration : Auto No protection ERP HT GF */
647 /* Values to set : 0 1 2 3 4 */
648 /* -------------------------------------------------------------- */
649 WID_11N_PROT_MECH = 0x0080,
651 /* ERP Protection type for MAC */
652 /* -------------------------------------------------------------- */
653 /* Configuration : Self-CTS RTS-CTS */
654 /* Values to set : 0 1 */
655 /* -------------------------------------------------------------- */
656 WID_11N_ERP_PROT_TYPE = 0x0081,
658 /* HT Option Enable */
659 /* -------------------------------------------------------------- */
660 /* Configuration : HT Enable HT Disable */
661 /* Values to set : 1 0 */
662 /* -------------------------------------------------------------- */
663 WID_11N_ENABLE = 0x0082,
665 /* 11n Operating mode (Note that 11g operating mode will also be */
666 /* used in addition to this, if this is set to HT Mixed mode) */
667 /* -------------------------------------------------------------- */
668 /* Configuration : HT Mixed HT Only-20MHz HT Only-20/40MHz */
669 /* Values to set : 1 2 3 */
670 /* -------------------------------------------------------------- */
671 WID_11N_OPERATING_MODE = 0x0083,
673 /* 11n OBSS non-HT STA Detection flag */
674 /* -------------------------------------------------------------- */
675 /* Configuration : Do not detect */
676 /* Values to set : 0 */
677 /* Configuration : Detect, do not protect or report */
678 /* Values to set : 1 */
679 /* Configuration : Detect, protect and do not report */
680 /* Values to set : 2 */
681 /* Configuration : Detect, protect and report to other BSS */
682 /* Values to set : 3 */
683 /* -------------------------------------------------------------- */
684 WID_11N_OBSS_NONHT_DETECTION = 0x0084,
686 /* 11n HT Protection Type */
687 /* -------------------------------------------------------------- */
688 /* Configuration : RTS-CTS First Frame Exchange at non-HT-rate */
689 /* Values to set : 0 1 */
690 /* Configuration : LSIG TXOP First Frame Exchange in Mixed Fmt */
691 /* Values to set : 2 3 */
692 /* -------------------------------------------------------------- */
693 WID_11N_HT_PROT_TYPE = 0x0085,
695 /* 11n RIFS Protection Enable Flag */
696 /* -------------------------------------------------------------- */
697 /* Configuration : Disable Enable */
698 /* Values to set : 0 1 */
699 /* -------------------------------------------------------------- */
700 WID_11N_RIFS_PROT_ENABLE = 0x0086,
703 /* -------------------------------------------------------------- */
704 /* Configuration : Static Dynamic MIMO (Power Save Disabled) */
705 /* Values to set : 1 2 3 */
706 /* -------------------------------------------------------------- */
707 WID_11N_SMPS_MODE = 0x0087,
709 /* Current transmit MCS */
710 /* -------------------------------------------------------------- */
711 /* Configuration : MCS Index for data rate */
712 /* Values to set : 0 to 7 */
713 /* -------------------------------------------------------------- */
714 WID_11N_CURRENT_TX_MCS = 0x0088,
716 WID_11N_PRINT_STATS = 0x0089,
718 /* 11n Short GI Enable Flag */
719 /* -------------------------------------------------------------- */
720 /* Configuration : Disable Enable */
721 /* Values to set : 0 1 */
722 /* -------------------------------------------------------------- */
723 WID_11N_SHORT_GI_ENABLE = 0x008D,
725 /* 11n RIFS Enable Flag */
726 /* -------------------------------------------------------------- */
727 /* Configuration : Disable Enable */
728 /* Values to set : 0 1 */
729 /* -------------------------------------------------------------- */
730 WID_RIFS_MODE = 0x0094,
732 /* TX Abort Feature */
733 /* -------------------------------------------------------------- */
734 /* Configuration : Disable Self CTS Enable Self CTS */
735 /* Values to set : 0 1 */
736 /* Configuration : Disable TX Abort Enable TX Abort */
737 /* Values to set : 2 3 */
738 /* Configuration : Enable HW TX Abort Enable SW TX Abort */
739 /* Values to set : 4 5 */
740 /* -------------------------------------------------------------- */
741 WID_TX_ABORT_CONFIG = 0x00A1,
743 WID_REG_TSSI_11B_VALUE = 0x00A6,
744 WID_REG_TSSI_11G_VALUE = 0x00A7,
745 WID_REG_TSSI_11N_VALUE = 0x00A8,
746 WID_TX_CALIBRATION = 0x00A9,
747 WID_DSCR_TSSI_11B_VALUE = 0x00AA,
748 WID_DSCR_TSSI_11G_VALUE = 0x00AB,
749 WID_DSCR_TSSI_11N_VALUE = 0x00AC,
751 /* Immediate Block-Ack Support */
752 /* -------------------------------------------------------------- */
753 /* Configuration : Disable Enable */
754 /* Values to set : 0 1 */
755 /* -------------------------------------------------------------- */
756 WID_11N_IMMEDIATE_BA_ENABLED = 0x00AF,
758 /* TXOP Disable Flag */
759 /* -------------------------------------------------------------- */
760 /* Configuration : Disable Enable */
761 /* Values to set : 1 0 */
762 /* -------------------------------------------------------------- */
763 WID_11N_TXOP_PROT_DISABLE = 0x00B0,
766 WID_TX_POWER_LEVEL_11N = 0x00B1,
768 /* Custom Character WID list */
769 WID_PC_TEST_MODE = 0x00C8,
771 /* SCAN Complete notification WID*/
772 WID_SCAN_COMPLETE = 0x00C9,
774 #ifdef WILC_AP_EXTERNAL_MLME
775 WID_DEL_BEACON = 0x00CA,
778 WID_LOGTerminal_Switch = 0x00CD,
779 /* EMAC Short WID list */
781 /* -------------------------------------------------------------- */
782 /* Configuration : Any value between 256 to 2347 */
783 /* Values to set : Same value. Default is 2347 */
784 /* -------------------------------------------------------------- */
785 WID_RTS_THRESHOLD = 0x1000,
787 /* Fragmentation Threshold */
788 /* -------------------------------------------------------------- */
789 /* Configuration : Any value between 256 to 2346 */
790 /* Values to set : Same value. Default is 2346 */
791 /* -------------------------------------------------------------- */
792 WID_FRAG_THRESHOLD = 0x1001,
794 WID_SHORT_RETRY_LIMIT = 0x1002,
795 WID_LONG_RETRY_LIMIT = 0x1003,
796 WID_BEACON_INTERVAL = 0x1006,
797 WID_MEMORY_ACCESS_16BIT = 0x1008,
798 WID_RX_SENSE = 0x100B,
799 WID_ACTIVE_SCAN_TIME = 0x100C,
800 WID_PASSIVE_SCAN_TIME = 0x100D,
802 WID_SITE_SURVEY_SCAN_TIME = 0x100E,
803 WID_JOIN_START_TIMEOUT = 0x100F,
804 WID_AUTH_TIMEOUT = 0x1010,
805 WID_ASOC_TIMEOUT = 0x1011,
806 WID_11I_PROTOCOL_TIMEOUT = 0x1012,
807 WID_EAPOL_RESPONSE_TIMEOUT = 0x1013,
809 /* NMAC Short WID list */
810 WID_11N_SIG_QUAL_VAL = 0x1085,
811 WID_CCA_THRESHOLD = 0x1087,
813 /* Custom Short WID list */
815 /* EMAC Integer WID list */
816 WID_FAILED_COUNT = 0x2000,
817 WID_RETRY_COUNT = 0x2001,
818 WID_MULTIPLE_RETRY_COUNT = 0x2002,
819 WID_FRAME_DUPLICATE_COUNT = 0x2003,
820 WID_ACK_FAILURE_COUNT = 0x2004,
821 WID_RECEIVED_FRAGMENT_COUNT = 0x2005,
822 WID_MCAST_RECEIVED_FRAME_COUNT = 0x2006,
823 WID_FCS_ERROR_COUNT = 0x2007,
824 WID_SUCCESS_FRAME_COUNT = 0x2008,
825 WID_HUT_TX_COUNT = 0x200A,
826 WID_TX_FRAGMENT_COUNT = 0x200B,
827 WID_TX_MULTICAST_FRAME_COUNT = 0x200C,
828 WID_RTS_SUCCESS_COUNT = 0x200D,
829 WID_RTS_FAILURE_COUNT = 0x200E,
830 WID_WEP_UNDECRYPTABLE_COUNT = 0x200F,
831 WID_REKEY_PERIOD = 0x2010,
832 WID_REKEY_PACKET_COUNT = 0x2011,
833 WID_1X_SERV_ADDR = 0x2012,
834 WID_STACK_IP_ADDR = 0x2013,
835 WID_STACK_NETMASK_ADDR = 0x2014,
836 WID_HW_RX_COUNT = 0x2015,
837 WID_MEMORY_ADDRESS = 0x201E,
838 WID_MEMORY_ACCESS_32BIT = 0x201F,
839 WID_RF_REG_VAL = 0x2021,
842 /* NMAC Integer WID list */
843 WID_11N_PHY_ACTIVE_REG_VAL = 0x2080,
845 /* Custom Integer WID list */
846 WID_GET_INACTIVE_TIME = 0x2084,
847 WID_SET_DRV_HANDLER = 0X2085,
848 WID_SET_OPERATION_MODE = 0X2086,
849 /* EMAC String WID list */
851 WID_FIRMWARE_VERSION = 0x3001,
852 WID_OPERATIONAL_RATE_SET = 0x3002,
854 WID_WEP_KEY_VALUE = 0x3004,
855 WID_11I_PSK = 0x3008,
856 WID_11E_P_ACTION_REQ = 0x3009,
858 WID_HARDWARE_VERSION = 0x300B,
859 WID_MAC_ADDR = 0x300C,
860 WID_HUT_DEST_ADDR = 0x300D,
861 WID_PHY_VERSION = 0x300F,
862 WID_SUPP_USERNAME = 0x3010,
863 WID_SUPP_PASSWORD = 0x3011,
864 WID_SITE_SURVEY_RESULTS = 0x3012,
865 WID_RX_POWER_LEVEL = 0x3013,
866 WID_DEL_ALL_RX_BA = 0x3014,
867 WID_SET_STA_MAC_INACTIVE_TIME = 0x3017,
868 WID_ADD_WEP_KEY = 0x3019,
869 WID_REMOVE_WEP_KEY = 0x301A,
870 WID_ADD_PTK = 0x301B,
871 WID_ADD_RX_GTK = 0x301C,
872 WID_ADD_TX_GTK = 0x301D,
873 WID_REMOVE_KEY = 0x301E,
874 WID_ASSOC_REQ_INFO = 0x301F,
875 WID_ASSOC_RES_INFO = 0x3020,
876 WID_MANUFACTURER = 0x3026, /*Added for CAPI tool */
877 WID_MODEL_NAME = 0x3027, /*Added for CAPI tool */
878 WID_MODEL_NUM = 0x3028, /*Added for CAPI tool */
879 WID_DEVICE_NAME = 0x3029, /*Added for CAPI tool */
881 /* NMAC String WID list */
882 WID_11N_P_ACTION_REQ = 0x3080,
883 WID_HUT_TEST_ID = 0x3081,
884 WID_PMKID_INFO = 0x3082,
885 WID_FIRMWARE_INFO = 0x3083,
887 WID_REGISTER_FRAME = 0x3084,
889 WID_DEL_ALL_STA = 0x3085,
891 WID_REMAIN_ON_CHAN = 0x3996,
894 WID_SSID_PROBE_REQ = 0x3997,
895 /*BugID_4124 WID to trigger modified Join Request using SSID and BSSID instead of bssListIdx (used by WID_JOIN_REQ)*/
896 WID_JOIN_REQ_EXTENDED = 0x3998,
898 /* BugID 4951: WID toset IP address in firmware */
899 WID_IP_ADDRESS = 0x3999,
903 /* Custom String WID list */
905 /* EMAC Binary WID list */
906 WID_UAPSD_CONFIG = 0x4001,
907 WID_UAPSD_STATUS = 0x4002,
908 WID_WMM_AP_AC_PARAMS = 0x4003,
909 WID_WMM_STA_AC_PARAMS = 0x4004,
910 WID_NETWORK_INFO = 0x4005,
911 WID_STA_JOIN_INFO = 0x4006,
912 WID_CONNECTED_STA_LIST = 0x4007,
914 /* NMAC Binary WID list */
915 WID_11N_AUTORATE_TABLE = 0x4080,
918 /*Added here by Amr - BugID 4134*/
919 WID_SCAN_CHANNEL_LIST = 0x4084,
921 /*BugID_3746 WID to add IE to be added in next probe request*/
922 WID_INFO_ELEMENT_PROBE = 0x4085,
923 /*BugID_3746 WID to add IE to be added in next associate request*/
924 WID_INFO_ELEMENT_ASSOCIATE = 0x4086,
925 WID_ADD_STA = 0X4087,
926 WID_REMOVE_STA = 0X4088,
927 WID_EDIT_STA = 0X4089,
928 WID_ADD_BEACON = 0x408a,
931 WID_SETUP_MULTICAST_FILTER = 0x408b,
933 /* Miscellaneous WIDs */
938 int wilc_wlan_init(wilc_wlan_inp_t *inp, wilc_wlan_oup_t *oup);
940 void wilc_bus_set_max_speed(void);
941 void wilc_bus_set_default_speed(void);
942 u32 wilc_get_chipid(u8 update);