drivers/tty/synclinkmp.c

   1 /*
   2  * $Id: synclinkmp.c,v 4.38 2005/07/15 13:29:44 paulkf Exp $
   3  *
   4  * Device driver for Microgate SyncLink Multiport
   5  * high speed multiprotocol serial adapter.
   6  *
   7  * written by Paul Fulghum for Microgate Corporation
   8  * paulkf@microgate.com
   9  *
  10  * Microgate and SyncLink are trademarks of Microgate Corporation
  11  *
  12  * Derived from serial.c written by Theodore Ts'o and Linus Torvalds
  13  * This code is released under the GNU General Public License (GPL)
  14  *
  15  * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
  16  * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  17  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  18  * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
  19  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  20  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  21  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  22  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  23  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  24  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
  25  * OF THE POSSIBILITY OF SUCH DAMAGE.
  26  */
  27
  28 #define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
  29 #if defined(__i386__)
  30 #  define BREAKPOINT() asm("   int $3");
  31 #else
  32 #  define BREAKPOINT() { }
  33 #endif
  34
  35 #define MAX_DEVICES 12
  36
  37 #include <linux/module.h>
  38 #include <linux/errno.h>
  39 #include <linux/signal.h>
  40 #include <linux/sched.h>
  41 #include <linux/timer.h>
  42 #include <linux/interrupt.h>
  43 #include <linux/pci.h>
  44 #include <linux/tty.h>
  45 #include <linux/tty_flip.h>
  46 #include <linux/serial.h>
  47 #include <linux/major.h>
  48 #include <linux/string.h>
  49 #include <linux/fcntl.h>
  50 #include <linux/ptrace.h>
  51 #include <linux/ioport.h>
  52 #include <linux/mm.h>
  53 #include <linux/seq_file.h>
  54 #include <linux/slab.h>
  55 #include <linux/netdevice.h>
  56 #include <linux/vmalloc.h>
  57 #include <linux/init.h>
  58 #include <linux/delay.h>
  59 #include <linux/ioctl.h>
  60
  61 #include <asm/io.h>
  62 #include <asm/irq.h>
  63 #include <asm/dma.h>
  64 #include <linux/bitops.h>
  65 #include <asm/types.h>
  66 #include <linux/termios.h>
  67 #include <linux/workqueue.h>
  68 #include <linux/hdlc.h>
  69 #include <linux/synclink.h>
  70
  71 #if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINKMP_MODULE))
  72 #define SYNCLINK_GENERIC_HDLC 1
  73 #else
  74 #define SYNCLINK_GENERIC_HDLC 0
  75 #endif
  76
  77 #define GET_USER(error,value,addr) error = get_user(value,addr)
  78 #define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
  79 #define PUT_USER(error,value,addr) error = put_user(value,addr)
  80 #define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
  81
  82 #include <asm/uaccess.h>
  83
  84 static MGSL_PARAMS default_params = {
  85         MGSL_MODE_HDLC,                 /* unsigned long mode */
  86         0,                              /* unsigned char loopback; */
  87         HDLC_FLAG_UNDERRUN_ABORT15,     /* unsigned short flags; */
  88         HDLC_ENCODING_NRZI_SPACE,       /* unsigned char encoding; */
  89         0,                              /* unsigned long clock_speed; */
  90         0xff,                           /* unsigned char addr_filter; */
  91         HDLC_CRC_16_CCITT,              /* unsigned short crc_type; */
  92         HDLC_PREAMBLE_LENGTH_8BITS,     /* unsigned char preamble_length; */
  93         HDLC_PREAMBLE_PATTERN_NONE,     /* unsigned char preamble; */
  94         9600,                           /* unsigned long data_rate; */
  95         8,                              /* unsigned char data_bits; */
  96         1,                              /* unsigned char stop_bits; */
  97         ASYNC_PARITY_NONE               /* unsigned char parity; */
  98 };
  99
 100 /* size in bytes of DMA data buffers */
 101 #define SCABUFSIZE      1024
 102 #define SCA_MEM_SIZE    0x40000
 103 #define SCA_BASE_SIZE   512
 104 #define SCA_REG_SIZE    16
 105 #define SCA_MAX_PORTS   4
 106 #define SCAMAXDESC      128
 107
 108 #define BUFFERLISTSIZE  4096
 109
 110 /* SCA-I style DMA buffer descriptor */
 111 typedef struct _SCADESC
 112 {
 113         u16     next;           /* lower l6 bits of next descriptor addr */
 114         u16     buf_ptr;        /* lower 16 bits of buffer addr */
 115         u8      buf_base;       /* upper 8 bits of buffer addr */
 116         u8      pad1;
 117         u16     length;         /* length of buffer */
 118         u8      status;         /* status of buffer */
 119         u8      pad2;
 120 } SCADESC, *PSCADESC;
 121
 122 typedef struct _SCADESC_EX
 123 {
 124         /* device driver bookkeeping section */
 125         char    *virt_addr;     /* virtual address of data buffer */
 126         u16     phys_entry;     /* lower 16-bits of physical address of this descriptor */
 127 } SCADESC_EX, *PSCADESC_EX;
 128
 129 /* The queue of BH actions to be performed */
 130
 131 #define BH_RECEIVE  1
 132 #define BH_TRANSMIT 2
 133 #define BH_STATUS   4
 134
 135 #define IO_PIN_SHUTDOWN_LIMIT 100
 136
 137 struct  _input_signal_events {
 138         int     ri_up;
 139         int     ri_down;
 140         int     dsr_up;
 141         int     dsr_down;
 142         int     dcd_up;
 143         int     dcd_down;
 144         int     cts_up;
 145         int     cts_down;
 146 };
 147
 148 /*
 149  * Device instance data structure
 150  */
 151 typedef struct _synclinkmp_info {
 152         void *if_ptr;                           /* General purpose pointer (used by SPPP) */
 153         int                     magic;
 154         struct tty_port         port;
 155         int                     line;
 156         unsigned short          close_delay;
 157         unsigned short          closing_wait;   /* time to wait before closing */
 158
 159         struct mgsl_icount      icount;
 160
 161         int                     timeout;
 162         int                     x_char;         /* xon/xoff character */
 163         u16                     read_status_mask1;  /* break detection (SR1 indications) */
 164         u16                     read_status_mask2;  /* parity/framing/overun (SR2 indications) */
 165         unsigned char           ignore_status_mask1;  /* break detection (SR1 indications) */
 166         unsigned char           ignore_status_mask2;  /* parity/framing/overun (SR2 indications) */
 167         unsigned char           *tx_buf;
 168         int                     tx_put;
 169         int                     tx_get;
 170         int                     tx_count;
 171
 172         wait_queue_head_t       status_event_wait_q;
 173         wait_queue_head_t       event_wait_q;
 174         struct timer_list       tx_timer;       /* HDLC transmit timeout timer */
 175         struct _synclinkmp_info *next_device;   /* device list link */
 176         struct timer_list       status_timer;   /* input signal status check timer */
 177
 178         spinlock_t lock;                /* spinlock for synchronizing with ISR */
 179         struct work_struct task;                        /* task structure for scheduling bh */
 180
 181         u32 max_frame_size;                     /* as set by device config */
 182
 183         u32 pending_bh;
 184
 185         bool bh_running;                                /* Protection from multiple */
 186         int isr_overflow;
 187         bool bh_requested;
 188
 189         int dcd_chkcount;                       /* check counts to prevent */
 190         int cts_chkcount;                       /* too many IRQs if a signal */
 191         int dsr_chkcount;                       /* is floating */
 192         int ri_chkcount;
 193
 194         char *buffer_list;                      /* virtual address of Rx & Tx buffer lists */
 195         unsigned long buffer_list_phys;
 196
 197         unsigned int rx_buf_count;              /* count of total allocated Rx buffers */
 198         SCADESC *rx_buf_list;                   /* list of receive buffer entries */
 199         SCADESC_EX rx_buf_list_ex[SCAMAXDESC]; /* list of receive buffer entries */
 200         unsigned int current_rx_buf;
 201
 202         unsigned int tx_buf_count;              /* count of total allocated Tx buffers */
 203         SCADESC *tx_buf_list;           /* list of transmit buffer entries */
 204         SCADESC_EX tx_buf_list_ex[SCAMAXDESC]; /* list of transmit buffer entries */
 205         unsigned int last_tx_buf;
 206
 207         unsigned char *tmp_rx_buf;
 208         unsigned int tmp_rx_buf_count;
 209
 210         bool rx_enabled;
 211         bool rx_overflow;
 212
 213         bool tx_enabled;
 214         bool tx_active;
 215         u32 idle_mode;
 216
 217         unsigned char ie0_value;
 218         unsigned char ie1_value;
 219         unsigned char ie2_value;
 220         unsigned char ctrlreg_value;
 221         unsigned char old_signals;
 222
 223         char device_name[25];                   /* device instance name */
 224
 225         int port_count;
 226         int adapter_num;
 227         int port_num;
 228
 229         struct _synclinkmp_info *port_array[SCA_MAX_PORTS];
 230
 231         unsigned int bus_type;                  /* expansion bus type (ISA,EISA,PCI) */
 232
 233         unsigned int irq_level;                 /* interrupt level */
 234         unsigned long irq_flags;
 235         bool irq_requested;                     /* true if IRQ requested */
 236
 237         MGSL_PARAMS params;                     /* communications parameters */
 238
 239         unsigned char serial_signals;           /* current serial signal states */
 240
 241         bool irq_occurred;                      /* for diagnostics use */
 242         unsigned int init_error;                /* Initialization startup error */
 243
 244         u32 last_mem_alloc;
 245         unsigned char* memory_base;             /* shared memory address (PCI only) */
 246         u32 phys_memory_base;
 247         int shared_mem_requested;
 248
 249         unsigned char* sca_base;                /* HD64570 SCA Memory address */
 250         u32 phys_sca_base;
 251         u32 sca_offset;
 252         bool sca_base_requested;
 253
 254         unsigned char* lcr_base;                /* local config registers (PCI only) */
 255         u32 phys_lcr_base;
 256         u32 lcr_offset;
 257         int lcr_mem_requested;
 258
 259         unsigned char* statctrl_base;           /* status/control register memory */
 260         u32 phys_statctrl_base;
 261         u32 statctrl_offset;
 262         bool sca_statctrl_requested;
 263
 264         u32 misc_ctrl_value;
 265         char *flag_buf;
 266         bool drop_rts_on_tx_done;
 267
 268         struct  _input_signal_events    input_signal_events;
 269
 270         /* SPPP/Cisco HDLC device parts */
 271         int netcount;
 272         spinlock_t netlock;
 273
 274 #if SYNCLINK_GENERIC_HDLC
 275         struct net_device *netdev;
 276 #endif
 277
 278 } SLMP_INFO;
 279
 280 #define MGSL_MAGIC 0x5401
 281
 282 /*
 283  * define serial signal status change macros
 284  */
 285 #define MISCSTATUS_DCD_LATCHED  (SerialSignal_DCD<<8)   /* indicates change in DCD */
 286 #define MISCSTATUS_RI_LATCHED   (SerialSignal_RI<<8)    /* indicates change in RI */
 287 #define MISCSTATUS_CTS_LATCHED  (SerialSignal_CTS<<8)   /* indicates change in CTS */
 288 #define MISCSTATUS_DSR_LATCHED  (SerialSignal_DSR<<8)   /* change in DSR */
 289
 290 /* Common Register macros */
 291 #define LPR     0x00
 292 #define PABR0   0x02
 293 #define PABR1   0x03
 294 #define WCRL    0x04
 295 #define WCRM    0x05
 296 #define WCRH    0x06
 297 #define DPCR    0x08
 298 #define DMER    0x09
 299 #define ISR0    0x10
 300 #define ISR1    0x11
 301 #define ISR2    0x12
 302 #define IER0    0x14
 303 #define IER1    0x15
 304 #define IER2    0x16
 305 #define ITCR    0x18
 306 #define INTVR   0x1a
 307 #define IMVR    0x1c
 308
 309 /* MSCI Register macros */
 310 #define TRB     0x20
 311 #define TRBL    0x20
 312 #define TRBH    0x21
 313 #define SR0     0x22
 314 #define SR1     0x23
 315 #define SR2     0x24
 316 #define SR3     0x25
 317 #define FST     0x26
 318 #define IE0     0x28
 319 #define IE1     0x29
 320 #define IE2     0x2a
 321 #define FIE     0x2b
 322 #define CMD     0x2c
 323 #define MD0     0x2e
 324 #define MD1     0x2f
 325 #define MD2     0x30
 326 #define CTL     0x31
 327 #define SA0     0x32
 328 #define SA1     0x33
 329 #define IDL     0x34
 330 #define TMC     0x35
 331 #define RXS     0x36
 332 #define TXS     0x37
 333 #define TRC0    0x38
 334 #define TRC1    0x39
 335 #define RRC     0x3a
 336 #define CST0    0x3c
 337 #define CST1    0x3d
 338
 339 /* Timer Register Macros */
 340 #define TCNT    0x60
 341 #define TCNTL   0x60
 342 #define TCNTH   0x61
 343 #define TCONR   0x62
 344 #define TCONRL  0x62
 345 #define TCONRH  0x63
 346 #define TMCS    0x64
 347 #define TEPR    0x65
 348
 349 /* DMA Controller Register macros */
 350 #define DARL    0x80
 351 #define DARH    0x81
 352 #define DARB    0x82
 353 #define BAR     0x80
 354 #define BARL    0x80
 355 #define BARH    0x81
 356 #define BARB    0x82
 357 #define SAR     0x84
 358 #define SARL    0x84
 359 #define SARH    0x85
 360 #define SARB    0x86
 361 #define CPB     0x86
 362 #define CDA     0x88
 363 #define CDAL    0x88
 364 #define CDAH    0x89
 365 #define EDA     0x8a
 366 #define EDAL    0x8a
 367 #define EDAH    0x8b
 368 #define BFL     0x8c
 369 #define BFLL    0x8c
 370 #define BFLH    0x8d
 371 #define BCR     0x8e
 372 #define BCRL    0x8e
 373 #define BCRH    0x8f
 374 #define DSR     0x90
 375 #define DMR     0x91
 376 #define FCT     0x93
 377 #define DIR     0x94
 378 #define DCMD    0x95
 379
 380 /* combine with timer or DMA register address */
 381 #define TIMER0  0x00
 382 #define TIMER1  0x08
 383 #define TIMER2  0x10
 384 #define TIMER3  0x18
 385 #define RXDMA   0x00
 386 #define TXDMA   0x20
 387
 388 /* SCA Command Codes */
 389 #define NOOP            0x00
 390 #define TXRESET         0x01
 391 #define TXENABLE        0x02
 392 #define TXDISABLE       0x03
 393 #define TXCRCINIT       0x04
 394 #define TXCRCEXCL       0x05
 395 #define TXEOM           0x06
 396 #define TXABORT         0x07
 397 #define MPON            0x08
 398 #define TXBUFCLR        0x09
 399 #define RXRESET         0x11
 400 #define RXENABLE        0x12
 401 #define RXDISABLE       0x13
 402 #define RXCRCINIT       0x14
 403 #define RXREJECT        0x15
 404 #define SEARCHMP        0x16
 405 #define RXCRCEXCL       0x17
 406 #define RXCRCCALC       0x18
 407 #define CHRESET         0x21
 408 #define HUNT            0x31
 409
 410 /* DMA command codes */
 411 #define SWABORT         0x01
 412 #define FEICLEAR        0x02
 413
 414 /* IE0 */
 415 #define TXINTE          BIT7
 416 #define RXINTE          BIT6
 417 #define TXRDYE          BIT1
 418 #define RXRDYE          BIT0
 419
 420 /* IE1 & SR1 */
 421 #define UDRN    BIT7
 422 #define IDLE    BIT6
 423 #define SYNCD   BIT4
 424 #define FLGD    BIT4
 425 #define CCTS    BIT3
 426 #define CDCD    BIT2
 427 #define BRKD    BIT1
 428 #define ABTD    BIT1
 429 #define GAPD    BIT1
 430 #define BRKE    BIT0
 431 #define IDLD    BIT0
 432
 433 /* IE2 & SR2 */
 434 #define EOM     BIT7
 435 #define PMP     BIT6
 436 #define SHRT    BIT6
 437 #define PE      BIT5
 438 #define ABT     BIT5
 439 #define FRME    BIT4
 440 #define RBIT    BIT4
 441 #define OVRN    BIT3
 442 #define CRCE    BIT2
 443
 444
 445 /*
 446  * Global linked list of SyncLink devices
 447  */
 448 static SLMP_INFO *synclinkmp_device_list = NULL;
 449 static int synclinkmp_adapter_count = -1;
 450 static int synclinkmp_device_count = 0;
 451
 452 /*
 453  * Set this param to non-zero to load eax with the
 454  * .text section address and breakpoint on module load.
 455  * This is useful for use with gdb and add-symbol-file command.
 456  */
 457 static bool break_on_load = 0;
 458
 459 /*
 460  * Driver major number, defaults to zero to get auto
 461  * assigned major number. May be forced as module parameter.
 462  */
 463 static int ttymajor = 0;
 464
 465 /*
 466  * Array of user specified options for ISA adapters.
 467  */
 468 static int debug_level = 0;
 469 static int maxframe[MAX_DEVICES] = {0,};
 470
 471 module_param(break_on_load, bool, 0);
 472 module_param(ttymajor, int, 0);
 473 module_param(debug_level, int, 0);
 474 module_param_array(maxframe, int, NULL, 0);
 475
 476 static char *driver_name = "SyncLink MultiPort driver";
 477 static char *driver_version = "$Revision: 4.38 $";
 478
 479 static int synclinkmp_init_one(struct pci_dev *dev,const struct pci_device_id *ent);
 480 static void synclinkmp_remove_one(struct pci_dev *dev);
 481
 482 static struct pci_device_id synclinkmp_pci_tbl[] = {
 483         { PCI_VENDOR_ID_MICROGATE, PCI_DEVICE_ID_MICROGATE_SCA, PCI_ANY_ID, PCI_ANY_ID, },
 484         { 0, }, /* terminate list */
 485 };
 486 MODULE_DEVICE_TABLE(pci, synclinkmp_pci_tbl);
 487
 488 MODULE_LICENSE("GPL");
 489
 490 static struct pci_driver synclinkmp_pci_driver = {
 491         .name           = "synclinkmp",
 492         .id_table       = synclinkmp_pci_tbl,
 493         .probe          = synclinkmp_init_one,
 494         .remove         = synclinkmp_remove_one,
 495 };
 496
 497
 498 static struct tty_driver *serial_driver;
 499
 500 /* number of characters left in xmit buffer before we ask for more */
 501 #define WAKEUP_CHARS 256
 502
 503
 504 /* tty callbacks */
 505
 506 static int  open(struct tty_struct *tty, struct file * filp);
 507 static void close(struct tty_struct *tty, struct file * filp);
 508 static void hangup(struct tty_struct *tty);
 509 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios);
 510
 511 static int  write(struct tty_struct *tty, const unsigned char *buf, int count);
 512 static int put_char(struct tty_struct *tty, unsigned char ch);
 513 static void send_xchar(struct tty_struct *tty, char ch);
 514 static void wait_until_sent(struct tty_struct *tty, int timeout);
 515 static int  write_room(struct tty_struct *tty);
 516 static void flush_chars(struct tty_struct *tty);
 517 static void flush_buffer(struct tty_struct *tty);
 518 static void tx_hold(struct tty_struct *tty);
 519 static void tx_release(struct tty_struct *tty);
 520
 521 static int  ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
 522 static int  chars_in_buffer(struct tty_struct *tty);
 523 static void throttle(struct tty_struct * tty);
 524 static void unthrottle(struct tty_struct * tty);
 525 static int set_break(struct tty_struct *tty, int break_state);
 526
 527 #if SYNCLINK_GENERIC_HDLC
 528 #define dev_to_port(D) (dev_to_hdlc(D)->priv)
 529 static void hdlcdev_tx_done(SLMP_INFO *info);
 530 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size);
 531 static int  hdlcdev_init(SLMP_INFO *info);
 532 static void hdlcdev_exit(SLMP_INFO *info);
 533 #endif
 534
 535 /* ioctl handlers */
 536
 537 static int  get_stats(SLMP_INFO *info, struct mgsl_icount __user *user_icount);
 538 static int  get_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
 539 static int  set_params(SLMP_INFO *info, MGSL_PARAMS __user *params);
 540 static int  get_txidle(SLMP_INFO *info, int __user *idle_mode);
 541 static int  set_txidle(SLMP_INFO *info, int idle_mode);
 542 static int  tx_enable(SLMP_INFO *info, int enable);
 543 static int  tx_abort(SLMP_INFO *info);
 544 static int  rx_enable(SLMP_INFO *info, int enable);
 545 static int  modem_input_wait(SLMP_INFO *info,int arg);
 546 static int  wait_mgsl_event(SLMP_INFO *info, int __user *mask_ptr);
 547 static int  tiocmget(struct tty_struct *tty);
 548 static int  tiocmset(struct tty_struct *tty,
 549                         unsigned int set, unsigned int clear);
 550 static int  set_break(struct tty_struct *tty, int break_state);
 551
 552 static void add_device(SLMP_INFO *info);
 553 static void device_init(int adapter_num, struct pci_dev *pdev);
 554 static int  claim_resources(SLMP_INFO *info);
 555 static void release_resources(SLMP_INFO *info);
 556
 557 static int  startup(SLMP_INFO *info);
 558 static int  block_til_ready(struct tty_struct *tty, struct file * filp,SLMP_INFO *info);
 559 static int carrier_raised(struct tty_port *port);
 560 static void shutdown(SLMP_INFO *info);
 561 static void program_hw(SLMP_INFO *info);
 562 static void change_params(SLMP_INFO *info);
 563
 564 static bool init_adapter(SLMP_INFO *info);
 565 static bool register_test(SLMP_INFO *info);
 566 static bool irq_test(SLMP_INFO *info);
 567 static bool loopback_test(SLMP_INFO *info);
 568 static int  adapter_test(SLMP_INFO *info);
 569 static bool memory_test(SLMP_INFO *info);
 570
 571 static void reset_adapter(SLMP_INFO *info);
 572 static void reset_port(SLMP_INFO *info);
 573 static void async_mode(SLMP_INFO *info);
 574 static void hdlc_mode(SLMP_INFO *info);
 575
 576 static void rx_stop(SLMP_INFO *info);
 577 static void rx_start(SLMP_INFO *info);
 578 static void rx_reset_buffers(SLMP_INFO *info);
 579 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last);
 580 static bool rx_get_frame(SLMP_INFO *info);
 581
 582 static void tx_start(SLMP_INFO *info);
 583 static void tx_stop(SLMP_INFO *info);
 584 static void tx_load_fifo(SLMP_INFO *info);
 585 static void tx_set_idle(SLMP_INFO *info);
 586 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count);
 587
 588 static void get_signals(SLMP_INFO *info);
 589 static void set_signals(SLMP_INFO *info);
 590 static void enable_loopback(SLMP_INFO *info, int enable);
 591 static void set_rate(SLMP_INFO *info, u32 data_rate);
 592
 593 static int  bh_action(SLMP_INFO *info);
 594 static void bh_handler(struct work_struct *work);
 595 static void bh_receive(SLMP_INFO *info);
 596 static void bh_transmit(SLMP_INFO *info);
 597 static void bh_status(SLMP_INFO *info);
 598 static void isr_timer(SLMP_INFO *info);
 599 static void isr_rxint(SLMP_INFO *info);
 600 static void isr_rxrdy(SLMP_INFO *info);
 601 static void isr_txint(SLMP_INFO *info);
 602 static void isr_txrdy(SLMP_INFO *info);
 603 static void isr_rxdmaok(SLMP_INFO *info);
 604 static void isr_rxdmaerror(SLMP_INFO *info);
 605 static void isr_txdmaok(SLMP_INFO *info);
 606 static void isr_txdmaerror(SLMP_INFO *info);
 607 static void isr_io_pin(SLMP_INFO *info, u16 status);
 608
 609 static int  alloc_dma_bufs(SLMP_INFO *info);
 610 static void free_dma_bufs(SLMP_INFO *info);
 611 static int  alloc_buf_list(SLMP_INFO *info);
 612 static int  alloc_frame_bufs(SLMP_INFO *info, SCADESC *list, SCADESC_EX *list_ex,int count);
 613 static int  alloc_tmp_rx_buf(SLMP_INFO *info);
 614 static void free_tmp_rx_buf(SLMP_INFO *info);
 615
 616 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count);
 617 static void trace_block(SLMP_INFO *info, const char* data, int count, int xmit);
 618 static void tx_timeout(unsigned long context);
 619 static void status_timeout(unsigned long context);
 620
 621 static unsigned char read_reg(SLMP_INFO *info, unsigned char addr);
 622 static void write_reg(SLMP_INFO *info, unsigned char addr, unsigned char val);
 623 static u16 read_reg16(SLMP_INFO *info, unsigned char addr);
 624 static void write_reg16(SLMP_INFO *info, unsigned char addr, u16 val);
 625 static unsigned char read_status_reg(SLMP_INFO * info);
 626 static void write_control_reg(SLMP_INFO * info);
 627
 628
 629 static unsigned char rx_active_fifo_level = 16; // rx request FIFO activation level in bytes
 630 static unsigned char tx_active_fifo_level = 16; // tx request FIFO activation level in bytes
 631 static unsigned char tx_negate_fifo_level = 32; // tx request FIFO negation level in bytes
 632
 633 static u32 misc_ctrl_value = 0x007e4040;
 634 static u32 lcr1_brdr_value = 0x00800028;
 635
 636 static u32 read_ahead_count = 8;
 637
 638 /* DPCR, DMA Priority Control
 639  *
 640  * 07..05  Not used, must be 0
 641  * 04      BRC, bus release condition: 0=all transfers complete
 642  *              1=release after 1 xfer on all channels
 643  * 03      CCC, channel change condition: 0=every cycle
 644  *              1=after each channel completes all xfers
 645  * 02..00  PR<2..0>, priority 100=round robin
 646  *
 647  * 00000100 = 0x00
 648  */
 649 static unsigned char dma_priority = 0x04;
 650
 651 // Number of bytes that can be written to shared RAM
 652 // in a single write operation
 653 static u32 sca_pci_load_interval = 64;
 654
 655 /*
 656  * 1st function defined in .text section. Calling this function in
 657  * init_module() followed by a breakpoint allows a remote debugger
 658  * (gdb) to get the .text address for the add-symbol-file command.
 659  * This allows remote debugging of dynamically loadable modules.
 660  */
 661 static void* synclinkmp_get_text_ptr(void);
 662 static void* synclinkmp_get_text_ptr(void) {return synclinkmp_get_text_ptr;}
 663
 664 static inline int sanity_check(SLMP_INFO *info,
 665                                char *name, const char *routine)
 666 {
 667 #ifdef SANITY_CHECK
 668         static const char *badmagic =
 669                 "Warning: bad magic number for synclinkmp_struct (%s) in %s\n";
 670         static const char *badinfo =
 671                 "Warning: null synclinkmp_struct for (%s) in %s\n";
 672
 673         if (!info) {
 674                 printk(badinfo, name, routine);
 675                 return 1;
 676         }
 677         if (info->magic != MGSL_MAGIC) {
 678                 printk(badmagic, name, routine);
 679                 return 1;
 680         }
 681 #else
 682         if (!info)
 683                 return 1;
 684 #endif
 685         return 0;
 686 }
 687
 688 /**
 689  * line discipline callback wrappers
 690  *
 691  * The wrappers maintain line discipline references
 692  * while calling into the line discipline.
 693  *
 694  * ldisc_receive_buf  - pass receive data to line discipline
 695  */
 696
 697 static void ldisc_receive_buf(struct tty_struct *tty,
 698                               const __u8 *data, char *flags, int count)
 699 {
 700         struct tty_ldisc *ld;
 701         if (!tty)
 702                 return;
 703         ld = tty_ldisc_ref(tty);
 704         if (ld) {
 705                 if (ld->ops->receive_buf)
 706                         ld->ops->receive_buf(tty, data, flags, count);
 707                 tty_ldisc_deref(ld);
 708         }
 709 }
 710
 711 /* tty callbacks */
 712
 713 static int install(struct tty_driver *driver, struct tty_struct *tty)
 714 {
 715         SLMP_INFO *info;
 716         int line = tty->index;
 717
 718         if (line >= synclinkmp_device_count) {
 719                 printk("%s(%d): open with invalid line #%d.\n",
 720                         __FILE__,__LINE__,line);
 721                 return -ENODEV;
 722         }
 723
 724         info = synclinkmp_device_list;
 725         while (info && info->line != line)
 726                 info = info->next_device;
 727         if (sanity_check(info, tty->name, "open"))
 728                 return -ENODEV;
 729         if (info->init_error) {
 730                 printk("%s(%d):%s device is not allocated, init error=%d\n",
 731                         __FILE__, __LINE__, info->device_name,
 732                         info->init_error);
 733                 return -ENODEV;
 734         }
 735
 736         tty->driver_data = info;
 737
 738         return tty_port_install(&info->port, driver, tty);
 739 }
 740
 741 /* Called when a port is opened.  Init and enable port.
 742  */
 743 static int open(struct tty_struct *tty, struct file *filp)
 744 {
 745         SLMP_INFO *info = tty->driver_data;
 746         unsigned long flags;
 747         int retval;
 748
 749         info->port.tty = tty;
 750
 751         if (debug_level >= DEBUG_LEVEL_INFO)
 752                 printk("%s(%d):%s open(), old ref count = %d\n",
 753                          __FILE__,__LINE__,tty->driver->name, info->port.count);
 754
 755         /* If port is closing, signal caller to try again */
 756         if (tty_hung_up_p(filp) || info->port.flags & ASYNC_CLOSING){
 757                 wait_event_interruptible_tty(tty, info->port.close_wait,
 758                                              !(info->port.flags & ASYNC_CLOSING));
 759                 retval = ((info->port.flags & ASYNC_HUP_NOTIFY) ?
 760                         -EAGAIN : -ERESTARTSYS);
 761                 goto cleanup;
 762         }
 763
 764         info->port.low_latency = (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 765
 766         spin_lock_irqsave(&info->netlock, flags);
 767         if (info->netcount) {
 768                 retval = -EBUSY;
 769                 spin_unlock_irqrestore(&info->netlock, flags);
 770                 goto cleanup;
 771         }
 772         info->port.count++;
 773         spin_unlock_irqrestore(&info->netlock, flags);
 774
 775         if (info->port.count == 1) {
 776                 /* 1st open on this device, init hardware */
 777                 retval = startup(info);
 778                 if (retval < 0)
 779                         goto cleanup;
 780         }
 781
 782         retval = block_til_ready(tty, filp, info);
 783         if (retval) {
 784                 if (debug_level >= DEBUG_LEVEL_INFO)
 785                         printk("%s(%d):%s block_til_ready() returned %d\n",
 786                                  __FILE__,__LINE__, info->device_name, retval);
 787                 goto cleanup;
 788         }
 789
 790         if (debug_level >= DEBUG_LEVEL_INFO)
 791                 printk("%s(%d):%s open() success\n",
 792                          __FILE__,__LINE__, info->device_name);
 793         retval = 0;
 794
 795 cleanup:
 796         if (retval) {
 797                 if (tty->count == 1)
 798                         info->port.tty = NULL; /* tty layer will release tty struct */
 799                 if(info->port.count)
 800                         info->port.count--;
 801         }
 802
 803         return retval;
 804 }
 805
 806 /* Called when port is closed. Wait for remaining data to be
 807  * sent. Disable port and free resources.
 808  */
 809 static void close(struct tty_struct *tty, struct file *filp)
 810 {
 811         SLMP_INFO * info = tty->driver_data;
 812
 813         if (sanity_check(info, tty->name, "close"))
 814                 return;
 815
 816         if (debug_level >= DEBUG_LEVEL_INFO)
 817                 printk("%s(%d):%s close() entry, count=%d\n",
 818                          __FILE__,__LINE__, info->device_name, info->port.count);
 819
 820         if (tty_port_close_start(&info->port, tty, filp) == 0)
 821                 goto cleanup;
 822
 823         mutex_lock(&info->port.mutex);
 824         if (info->port.flags & ASYNC_INITIALIZED)
 825                 wait_until_sent(tty, info->timeout);
 826
 827         flush_buffer(tty);
 828         tty_ldisc_flush(tty);
 829         shutdown(info);
 830         mutex_unlock(&info->port.mutex);
 831
 832         tty_port_close_end(&info->port, tty);
 833         info->port.tty = NULL;
 834 cleanup:
 835         if (debug_level >= DEBUG_LEVEL_INFO)
 836                 printk("%s(%d):%s close() exit, count=%d\n", __FILE__,__LINE__,
 837                         tty->driver->name, info->port.count);
 838 }
 839
 840 /* Called by tty_hangup() when a hangup is signaled.
 841  * This is the same as closing all open descriptors for the port.
 842  */
 843 static void hangup(struct tty_struct *tty)
 844 {
 845         SLMP_INFO *info = tty->driver_data;
 846         unsigned long flags;
 847
 848         if (debug_level >= DEBUG_LEVEL_INFO)
 849                 printk("%s(%d):%s hangup()\n",
 850                          __FILE__,__LINE__, info->device_name );
 851
 852         if (sanity_check(info, tty->name, "hangup"))
 853                 return;
 854
 855         mutex_lock(&info->port.mutex);
 856         flush_buffer(tty);
 857         shutdown(info);
 858
 859         spin_lock_irqsave(&info->port.lock, flags);
 860         info->port.count = 0;
 861         info->port.flags &= ~ASYNC_NORMAL_ACTIVE;
 862         info->port.tty = NULL;
 863         spin_unlock_irqrestore(&info->port.lock, flags);
 864         mutex_unlock(&info->port.mutex);
 865
 866         wake_up_interruptible(&info->port.open_wait);
 867 }
 868
 869 /* Set new termios settings
 870  */
 871 static void set_termios(struct tty_struct *tty, struct ktermios *old_termios)
 872 {
 873         SLMP_INFO *info = tty->driver_data;
 874         unsigned long flags;
 875
 876         if (debug_level >= DEBUG_LEVEL_INFO)
 877                 printk("%s(%d):%s set_termios()\n", __FILE__,__LINE__,
 878                         tty->driver->name );
 879
 880         change_params(info);
 881
 882         /* Handle transition to B0 status */
 883         if (old_termios->c_cflag & CBAUD &&
 884             !(tty->termios.c_cflag & CBAUD)) {
 885                 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
 886                 spin_lock_irqsave(&info->lock,flags);
 887                 set_signals(info);
 888                 spin_unlock_irqrestore(&info->lock,flags);
 889         }
 890
 891         /* Handle transition away from B0 status */
 892         if (!(old_termios->c_cflag & CBAUD) &&
 893             tty->termios.c_cflag & CBAUD) {
 894                 info->serial_signals |= SerialSignal_DTR;
 895                 if (!(tty->termios.c_cflag & CRTSCTS) ||
 896                     !test_bit(TTY_THROTTLED, &tty->flags)) {
 897                         info->serial_signals |= SerialSignal_RTS;
 898                 }
 899                 spin_lock_irqsave(&info->lock,flags);
 900                 set_signals(info);
 901                 spin_unlock_irqrestore(&info->lock,flags);
 902         }
 903
 904         /* Handle turning off CRTSCTS */
 905         if (old_termios->c_cflag & CRTSCTS &&
 906             !(tty->termios.c_cflag & CRTSCTS)) {
 907                 tty->hw_stopped = 0;
 908                 tx_release(tty);
 909         }
 910 }
 911
 912 /* Send a block of data
 913  *
 914  * Arguments:
 915  *
 916  *      tty             pointer to tty information structure
 917  *      buf             pointer to buffer containing send data
 918  *      count           size of send data in bytes
 919  *
 920  * Return Value:        number of characters written
 921  */
 922 static int write(struct tty_struct *tty,
 923                  const unsigned char *buf, int count)
 924 {
 925         int     c, ret = 0;
 926         SLMP_INFO *info = tty->driver_data;
 927         unsigned long flags;
 928
 929         if (debug_level >= DEBUG_LEVEL_INFO)
 930                 printk("%s(%d):%s write() count=%d\n",
 931                        __FILE__,__LINE__,info->device_name,count);
 932
 933         if (sanity_check(info, tty->name, "write"))
 934                 goto cleanup;
 935
 936         if (!info->tx_buf)
 937                 goto cleanup;
 938
 939         if (info->params.mode == MGSL_MODE_HDLC) {
 940                 if (count > info->max_frame_size) {
 941                         ret = -EIO;
 942                         goto cleanup;
 943                 }
 944                 if (info->tx_active)
 945                         goto cleanup;
 946                 if (info->tx_count) {
 947                         /* send accumulated data from send_char() calls */
 948                         /* as frame and wait before accepting more data. */
 949                         tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
 950                         goto start;
 951                 }
 952                 ret = info->tx_count = count;
 953                 tx_load_dma_buffer(info, buf, count);
 954                 goto start;
 955         }
 956
 957         for (;;) {
 958                 c = min_t(int, count,
 959                         min(info->max_frame_size - info->tx_count - 1,
 960                             info->max_frame_size - info->tx_put));
 961                 if (c <= 0)
 962                         break;
 963
 964                 memcpy(info->tx_buf + info->tx_put, buf, c);
 965
 966                 spin_lock_irqsave(&info->lock,flags);
 967                 info->tx_put += c;
 968                 if (info->tx_put >= info->max_frame_size)
 969                         info->tx_put -= info->max_frame_size;
 970                 info->tx_count += c;
 971                 spin_unlock_irqrestore(&info->lock,flags);
 972
 973                 buf += c;
 974                 count -= c;
 975                 ret += c;
 976         }
 977
 978         if (info->params.mode == MGSL_MODE_HDLC) {
 979                 if (count) {
 980                         ret = info->tx_count = 0;
 981                         goto cleanup;
 982                 }
 983                 tx_load_dma_buffer(info, info->tx_buf, info->tx_count);
 984         }
 985 start:
 986         if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
 987                 spin_lock_irqsave(&info->lock,flags);
 988                 if (!info->tx_active)
 989                         tx_start(info);
 990                 spin_unlock_irqrestore(&info->lock,flags);
 991         }
 992
 993 cleanup:
 994         if (debug_level >= DEBUG_LEVEL_INFO)
 995                 printk( "%s(%d):%s write() returning=%d\n",
 996                         __FILE__,__LINE__,info->device_name,ret);
 997         return ret;
 998 }
 999
1000 /* Add a character to the transmit buffer.
1001  */
1002 static int put_char(struct tty_struct *tty, unsigned char ch)
1003 {
1004         SLMP_INFO *info = tty->driver_data;
1005         unsigned long flags;
1006         int ret = 0;
1007
1008         if ( debug_level >= DEBUG_LEVEL_INFO ) {
1009                 printk( "%s(%d):%s put_char(%d)\n",
1010                         __FILE__,__LINE__,info->device_name,ch);
1011         }
1012
1013         if (sanity_check(info, tty->name, "put_char"))
1014                 return 0;
1015
1016         if (!info->tx_buf)
1017                 return 0;
1018
1019         spin_lock_irqsave(&info->lock,flags);
1020
1021         if ( (info->params.mode != MGSL_MODE_HDLC) ||
1022              !info->tx_active ) {
1023
1024                 if (info->tx_count < info->max_frame_size - 1) {
1025                         info->tx_buf[info->tx_put++] = ch;
1026                         if (info->tx_put >= info->max_frame_size)
1027                                 info->tx_put -= info->max_frame_size;
1028                         info->tx_count++;
1029                         ret = 1;
1030                 }
1031         }
1032
1033         spin_unlock_irqrestore(&info->lock,flags);
1034         return ret;
1035 }
1036
1037 /* Send a high-priority XON/XOFF character
1038  */
1039 static void send_xchar(struct tty_struct *tty, char ch)
1040 {
1041         SLMP_INFO *info = tty->driver_data;
1042         unsigned long flags;
1043
1044         if (debug_level >= DEBUG_LEVEL_INFO)
1045                 printk("%s(%d):%s send_xchar(%d)\n",
1046                          __FILE__,__LINE__, info->device_name, ch );
1047
1048         if (sanity_check(info, tty->name, "send_xchar"))
1049                 return;
1050
1051         info->x_char = ch;
1052         if (ch) {
1053                 /* Make sure transmit interrupts are on */
1054                 spin_lock_irqsave(&info->lock,flags);
1055                 if (!info->tx_enabled)
1056                         tx_start(info);
1057                 spin_unlock_irqrestore(&info->lock,flags);
1058         }
1059 }
1060
1061 /* Wait until the transmitter is empty.
1062  */
1063 static void wait_until_sent(struct tty_struct *tty, int timeout)
1064 {
1065         SLMP_INFO * info = tty->driver_data;
1066         unsigned long orig_jiffies, char_time;
1067
1068         if (!info )
1069                 return;
1070
1071         if (debug_level >= DEBUG_LEVEL_INFO)
1072                 printk("%s(%d):%s wait_until_sent() entry\n",
1073                          __FILE__,__LINE__, info->device_name );
1074
1075         if (sanity_check(info, tty->name, "wait_until_sent"))
1076                 return;
1077
1078         if (!test_bit(ASYNCB_INITIALIZED, &info->port.flags))
1079                 goto exit;
1080
1081         orig_jiffies = jiffies;
1082
1083         /* Set check interval to 1/5 of estimated time to
1084          * send a character, and make it at least 1. The check
1085          * interval should also be less than the timeout.
1086          * Note: use tight timings here to satisfy the NIST-PCTS.
1087          */
1088
1089         if ( info->params.data_rate ) {
1090                 char_time = info->timeout/(32 * 5);
1091                 if (!char_time)
1092                         char_time++;
1093         } else
1094                 char_time = 1;
1095
1096         if (timeout)
1097                 char_time = min_t(unsigned long, char_time, timeout);
1098
1099         if ( info->params.mode == MGSL_MODE_HDLC ) {
1100                 while (info->tx_active) {
1101                         msleep_interruptible(jiffies_to_msecs(char_time));
1102                         if (signal_pending(current))
1103                                 break;
1104                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
1105                                 break;
1106                 }
1107         } else {
1108                 /*
1109                  * TODO: determine if there is something similar to USC16C32
1110                  *       TXSTATUS_ALL_SENT status
1111                  */
1112                 while ( info->tx_active && info->tx_enabled) {
1113                         msleep_interruptible(jiffies_to_msecs(char_time));
1114                         if (signal_pending(current))
1115                                 break;
1116                         if (timeout && time_after(jiffies, orig_jiffies + timeout))
1117                                 break;
1118                 }
1119         }
1120
1121 exit:
1122         if (debug_level >= DEBUG_LEVEL_INFO)
1123                 printk("%s(%d):%s wait_until_sent() exit\n",
1124                          __FILE__,__LINE__, info->device_name );
1125 }
1126
1127 /* Return the count of free bytes in transmit buffer
1128  */
1129 static int write_room(struct tty_struct *tty)
1130 {
1131         SLMP_INFO *info = tty->driver_data;
1132         int ret;
1133
1134         if (sanity_check(info, tty->name, "write_room"))
1135                 return 0;
1136
1137         if (info->params.mode == MGSL_MODE_HDLC) {
1138                 ret = (info->tx_active) ? 0 : HDLC_MAX_FRAME_SIZE;
1139         } else {
1140                 ret = info->max_frame_size - info->tx_count - 1;
1141                 if (ret < 0)
1142                         ret = 0;
1143         }
1144
1145         if (debug_level >= DEBUG_LEVEL_INFO)
1146                 printk("%s(%d):%s write_room()=%d\n",
1147                        __FILE__, __LINE__, info->device_name, ret);
1148
1149         return ret;
1150 }
1151
1152 /* enable transmitter and send remaining buffered characters
1153  */
1154 static void flush_chars(struct tty_struct *tty)
1155 {
1156         SLMP_INFO *info = tty->driver_data;
1157         unsigned long flags;
1158
1159         if ( debug_level >= DEBUG_LEVEL_INFO )
1160                 printk( "%s(%d):%s flush_chars() entry tx_count=%d\n",
1161                         __FILE__,__LINE__,info->device_name,info->tx_count);
1162
1163         if (sanity_check(info, tty->name, "flush_chars"))
1164                 return;
1165
1166         if (info->tx_count <= 0 || tty->stopped || tty->hw_stopped ||
1167             !info->tx_buf)
1168                 return;
1169
1170         if ( debug_level >= DEBUG_LEVEL_INFO )
1171                 printk( "%s(%d):%s flush_chars() entry, starting transmitter\n",
1172                         __FILE__,__LINE__,info->device_name );
1173
1174         spin_lock_irqsave(&info->lock,flags);
1175
1176         if (!info->tx_active) {
1177                 if ( (info->params.mode == MGSL_MODE_HDLC) &&
1178                         info->tx_count ) {
1179                         /* operating in synchronous (frame oriented) mode */
1180                         /* copy data from circular tx_buf to */
1181                         /* transmit DMA buffer. */
1182                         tx_load_dma_buffer(info,
1183                                  info->tx_buf,info->tx_count);
1184                 }
1185                 tx_start(info);
1186         }
1187
1188         spin_unlock_irqrestore(&info->lock,flags);
1189 }
1190
1191 /* Discard all data in the send buffer
1192  */
1193 static void flush_buffer(struct tty_struct *tty)
1194 {
1195         SLMP_INFO *info = tty->driver_data;
1196         unsigned long flags;
1197
1198         if (debug_level >= DEBUG_LEVEL_INFO)
1199                 printk("%s(%d):%s flush_buffer() entry\n",
1200                          __FILE__,__LINE__, info->device_name );
1201
1202         if (sanity_check(info, tty->name, "flush_buffer"))
1203                 return;
1204
1205         spin_lock_irqsave(&info->lock,flags);
1206         info->tx_count = info->tx_put = info->tx_get = 0;
1207         del_timer(&info->tx_timer);
1208         spin_unlock_irqrestore(&info->lock,flags);
1209
1210         tty_wakeup(tty);
1211 }
1212
1213 /* throttle (stop) transmitter
1214  */
1215 static void tx_hold(struct tty_struct *tty)
1216 {
1217         SLMP_INFO *info = tty->driver_data;
1218         unsigned long flags;
1219
1220         if (sanity_check(info, tty->name, "tx_hold"))
1221                 return;
1222
1223         if ( debug_level >= DEBUG_LEVEL_INFO )
1224                 printk("%s(%d):%s tx_hold()\n",
1225                         __FILE__,__LINE__,info->device_name);
1226
1227         spin_lock_irqsave(&info->lock,flags);
1228         if (info->tx_enabled)
1229                 tx_stop(info);
1230         spin_unlock_irqrestore(&info->lock,flags);
1231 }
1232
1233 /* release (start) transmitter
1234  */
1235 static void tx_release(struct tty_struct *tty)
1236 {
1237         SLMP_INFO *info = tty->driver_data;
1238         unsigned long flags;
1239
1240         if (sanity_check(info, tty->name, "tx_release"))
1241                 return;
1242
1243         if ( debug_level >= DEBUG_LEVEL_INFO )
1244                 printk("%s(%d):%s tx_release()\n",
1245                         __FILE__,__LINE__,info->device_name);
1246
1247         spin_lock_irqsave(&info->lock,flags);
1248         if (!info->tx_enabled)
1249                 tx_start(info);
1250         spin_unlock_irqrestore(&info->lock,flags);
1251 }
1252
1253 /* Service an IOCTL request
1254  *
1255  * Arguments:
1256  *
1257  *      tty     pointer to tty instance data
1258  *      cmd     IOCTL command code
1259  *      arg     command argument/context
1260  *
1261  * Return Value:        0 if success, otherwise error code
1262  */
1263 static int ioctl(struct tty_struct *tty,
1264                  unsigned int cmd, unsigned long arg)
1265 {
1266         SLMP_INFO *info = tty->driver_data;
1267         void __user *argp = (void __user *)arg;
1268
1269         if (debug_level >= DEBUG_LEVEL_INFO)
1270                 printk("%s(%d):%s ioctl() cmd=%08X\n", __FILE__,__LINE__,
1271                         info->device_name, cmd );
1272
1273         if (sanity_check(info, tty->name, "ioctl"))
1274                 return -ENODEV;
1275
1276         if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
1277             (cmd != TIOCMIWAIT)) {
1278                 if (tty->flags & (1 << TTY_IO_ERROR))
1279                     return -EIO;
1280         }
1281
1282         switch (cmd) {
1283         case MGSL_IOCGPARAMS:
1284                 return get_params(info, argp);
1285         case MGSL_IOCSPARAMS:
1286                 return set_params(info, argp);
1287         case MGSL_IOCGTXIDLE:
1288                 return get_txidle(info, argp);
1289         case MGSL_IOCSTXIDLE:
1290                 return set_txidle(info, (int)arg);
1291         case MGSL_IOCTXENABLE:
1292                 return tx_enable(info, (int)arg);
1293         case MGSL_IOCRXENABLE:
1294                 return rx_enable(info, (int)arg);
1295         case MGSL_IOCTXABORT:
1296                 return tx_abort(info);
1297         case MGSL_IOCGSTATS:
1298                 return get_stats(info, argp);
1299         case MGSL_IOCWAITEVENT:
1300                 return wait_mgsl_event(info, argp);
1301         case MGSL_IOCLOOPTXDONE:
1302                 return 0; // TODO: Not supported, need to document
1303                 /* Wait for modem input (DCD,RI,DSR,CTS) change
1304                  * as specified by mask in arg (TIOCM_RNG/DSR/CD/CTS)
1305                  */
1306         case TIOCMIWAIT:
1307                 return modem_input_wait(info,(int)arg);
1308
1309                 /*
1310                  * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
1311                  * Return: write counters to the user passed counter struct
1312                  * NB: both 1->0 and 0->1 transitions are counted except for
1313                  *     RI where only 0->1 is counted.
1314                  */
1315         default:
1316                 return -ENOIOCTLCMD;
1317         }
1318         return 0;
1319 }
1320
1321 static int get_icount(struct tty_struct *tty,
1322                                 struct serial_icounter_struct *icount)
1323 {
1324         SLMP_INFO *info = tty->driver_data;
1325         struct mgsl_icount cnow;        /* kernel counter temps */
1326         unsigned long flags;
1327
1328         spin_lock_irqsave(&info->lock,flags);
1329         cnow = info->icount;
1330         spin_unlock_irqrestore(&info->lock,flags);
1331
1332         icount->cts = cnow.cts;
1333         icount->dsr = cnow.dsr;
1334         icount->rng = cnow.rng;
1335         icount->dcd = cnow.dcd;
1336         icount->rx = cnow.rx;
1337         icount->tx = cnow.tx;
1338         icount->frame = cnow.frame;
1339         icount->overrun = cnow.overrun;
1340         icount->parity = cnow.parity;
1341         icount->brk = cnow.brk;
1342         icount->buf_overrun = cnow.buf_overrun;
1343
1344         return 0;
1345 }
1346
1347 /*
1348  * /proc fs routines....
1349  */
1350
1351 static inline void line_info(struct seq_file *m, SLMP_INFO *info)
1352 {
1353         char    stat_buf[30];
1354         unsigned long flags;
1355
1356         seq_printf(m, "%s: SCABase=%08x Mem=%08X StatusControl=%08x LCR=%08X\n"
1357                        "\tIRQ=%d MaxFrameSize=%u\n",
1358                 info->device_name,
1359                 info->phys_sca_base,
1360                 info->phys_memory_base,
1361                 info->phys_statctrl_base,
1362                 info->phys_lcr_base,
1363                 info->irq_level,
1364                 info->max_frame_size );
1365
1366         /* output current serial signal states */
1367         spin_lock_irqsave(&info->lock,flags);
1368         get_signals(info);
1369         spin_unlock_irqrestore(&info->lock,flags);
1370
1371         stat_buf[0] = 0;
1372         stat_buf[1] = 0;
1373         if (info->serial_signals & SerialSignal_RTS)
1374                 strcat(stat_buf, "|RTS");
1375         if (info->serial_signals & SerialSignal_CTS)
1376                 strcat(stat_buf, "|CTS");
1377         if (info->serial_signals & SerialSignal_DTR)
1378                 strcat(stat_buf, "|DTR");
1379         if (info->serial_signals & SerialSignal_DSR)
1380                 strcat(stat_buf, "|DSR");
1381         if (info->serial_signals & SerialSignal_DCD)
1382                 strcat(stat_buf, "|CD");
1383         if (info->serial_signals & SerialSignal_RI)
1384                 strcat(stat_buf, "|RI");
1385
1386         if (info->params.mode == MGSL_MODE_HDLC) {
1387                 seq_printf(m, "\tHDLC txok:%d rxok:%d",
1388                               info->icount.txok, info->icount.rxok);
1389                 if (info->icount.txunder)
1390                         seq_printf(m, " txunder:%d", info->icount.txunder);
1391                 if (info->icount.txabort)
1392                         seq_printf(m, " txabort:%d", info->icount.txabort);
1393                 if (info->icount.rxshort)
1394                         seq_printf(m, " rxshort:%d", info->icount.rxshort);
1395                 if (info->icount.rxlong)
1396                         seq_printf(m, " rxlong:%d", info->icount.rxlong);
1397                 if (info->icount.rxover)
1398                         seq_printf(m, " rxover:%d", info->icount.rxover);
1399                 if (info->icount.rxcrc)
1400                         seq_printf(m, " rxlong:%d", info->icount.rxcrc);
1401         } else {
1402                 seq_printf(m, "\tASYNC tx:%d rx:%d",
1403                               info->icount.tx, info->icount.rx);
1404                 if (info->icount.frame)
1405                         seq_printf(m, " fe:%d", info->icount.frame);
1406                 if (info->icount.parity)
1407                         seq_printf(m, " pe:%d", info->icount.parity);
1408                 if (info->icount.brk)
1409                         seq_printf(m, " brk:%d", info->icount.brk);
1410                 if (info->icount.overrun)
1411                         seq_printf(m, " oe:%d", info->icount.overrun);
1412         }
1413
1414         /* Append serial signal status to end */
1415         seq_printf(m, " %s\n", stat_buf+1);
1416
1417         seq_printf(m, "\ttxactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
1418          info->tx_active,info->bh_requested,info->bh_running,
1419          info->pending_bh);
1420 }
1421
1422 /* Called to print information about devices
1423  */
1424 static int synclinkmp_proc_show(struct seq_file *m, void *v)
1425 {
1426         SLMP_INFO *info;
1427
1428         seq_printf(m, "synclinkmp driver:%s\n", driver_version);
1429
1430         info = synclinkmp_device_list;
1431         while( info ) {
1432                 line_info(m, info);
1433                 info = info->next_device;
1434         }
1435         return 0;
1436 }
1437
1438 static int synclinkmp_proc_open(struct inode *inode, struct file *file)
1439 {
1440         return single_open(file, synclinkmp_proc_show, NULL);
1441 }
1442
1443 static const struct file_operations synclinkmp_proc_fops = {
1444         .owner          = THIS_MODULE,
1445         .open           = synclinkmp_proc_open,
1446         .read           = seq_read,
1447         .llseek         = seq_lseek,
1448         .release        = single_release,
1449 };
1450
1451 /* Return the count of bytes in transmit buffer
1452  */
1453 static int chars_in_buffer(struct tty_struct *tty)
1454 {
1455         SLMP_INFO *info = tty->driver_data;
1456
1457         if (sanity_check(info, tty->name, "chars_in_buffer"))
1458                 return 0;
1459
1460         if (debug_level >= DEBUG_LEVEL_INFO)
1461                 printk("%s(%d):%s chars_in_buffer()=%d\n",
1462                        __FILE__, __LINE__, info->device_name, info->tx_count);
1463
1464         return info->tx_count;
1465 }
1466
1467 /* Signal remote device to throttle send data (our receive data)
1468  */
1469 static void throttle(struct tty_struct * tty)
1470 {
1471         SLMP_INFO *info = tty->driver_data;
1472         unsigned long flags;
1473
1474         if (debug_level >= DEBUG_LEVEL_INFO)
1475                 printk("%s(%d):%s throttle() entry\n",
1476                          __FILE__,__LINE__, info->device_name );
1477
1478         if (sanity_check(info, tty->name, "throttle"))
1479                 return;
1480
1481         if (I_IXOFF(tty))
1482                 send_xchar(tty, STOP_CHAR(tty));
1483
1484         if (tty->termios.c_cflag & CRTSCTS) {
1485                 spin_lock_irqsave(&info->lock,flags);
1486                 info->serial_signals &= ~SerialSignal_RTS;
1487                 set_signals(info);
1488                 spin_unlock_irqrestore(&info->lock,flags);
1489         }
1490 }
1491
1492 /* Signal remote device to stop throttling send data (our receive data)
1493  */
1494 static void unthrottle(struct tty_struct * tty)
1495 {
1496         SLMP_INFO *info = tty->driver_data;
1497         unsigned long flags;
1498
1499         if (debug_level >= DEBUG_LEVEL_INFO)
1500                 printk("%s(%d):%s unthrottle() entry\n",
1501                          __FILE__,__LINE__, info->device_name );
1502
1503         if (sanity_check(info, tty->name, "unthrottle"))
1504                 return;
1505
1506         if (I_IXOFF(tty)) {
1507                 if (info->x_char)
1508                         info->x_char = 0;
1509                 else
1510                         send_xchar(tty, START_CHAR(tty));
1511         }
1512
1513         if (tty->termios.c_cflag & CRTSCTS) {
1514                 spin_lock_irqsave(&info->lock,flags);
1515                 info->serial_signals |= SerialSignal_RTS;
1516                 set_signals(info);
1517                 spin_unlock_irqrestore(&info->lock,flags);
1518         }
1519 }
1520
1521 /* set or clear transmit break condition
1522  * break_state  -1=set break condition, 0=clear
1523  */
1524 static int set_break(struct tty_struct *tty, int break_state)
1525 {
1526         unsigned char RegValue;
1527         SLMP_INFO * info = tty->driver_data;
1528         unsigned long flags;
1529
1530         if (debug_level >= DEBUG_LEVEL_INFO)
1531                 printk("%s(%d):%s set_break(%d)\n",
1532                          __FILE__,__LINE__, info->device_name, break_state);
1533
1534         if (sanity_check(info, tty->name, "set_break"))
1535                 return -EINVAL;
1536
1537         spin_lock_irqsave(&info->lock,flags);
1538         RegValue = read_reg(info, CTL);
1539         if (break_state == -1)
1540                 RegValue |= BIT3;
1541         else
1542                 RegValue &= ~BIT3;
1543         write_reg(info, CTL, RegValue);
1544         spin_unlock_irqrestore(&info->lock,flags);
1545         return 0;
1546 }
1547
1548 #if SYNCLINK_GENERIC_HDLC
1549
1550 /**
1551  * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
1552  * set encoding and frame check sequence (FCS) options
1553  *
1554  * dev       pointer to network device structure
1555  * encoding  serial encoding setting
1556  * parity    FCS setting
1557  *
1558  * returns 0 if success, otherwise error code
1559  */
1560 static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
1561                           unsigned short parity)
1562 {
1563         SLMP_INFO *info = dev_to_port(dev);
1564         unsigned char  new_encoding;
1565         unsigned short new_crctype;
1566
1567         /* return error if TTY interface open */
1568         if (info->port.count)
1569                 return -EBUSY;
1570
1571         switch (encoding)
1572         {
1573         case ENCODING_NRZ:        new_encoding = HDLC_ENCODING_NRZ; break;
1574         case ENCODING_NRZI:       new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
1575         case ENCODING_FM_MARK:    new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
1576         case ENCODING_FM_SPACE:   new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
1577         case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
1578         default: return -EINVAL;
1579         }
1580
1581         switch (parity)
1582         {
1583         case PARITY_NONE:            new_crctype = HDLC_CRC_NONE; break;
1584         case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
1585         case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
1586         default: return -EINVAL;
1587         }
1588
1589         info->params.encoding = new_encoding;
1590         info->params.crc_type = new_crctype;
1591
1592         /* if network interface up, reprogram hardware */
1593         if (info->netcount)
1594                 program_hw(info);
1595
1596         return 0;
1597 }
1598
1599 /**
1600  * called by generic HDLC layer to send frame
1601  *
1602  * skb  socket buffer containing HDLC frame
1603  * dev  pointer to network device structure
1604  */
1605 static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
1606                                       struct net_device *dev)
1607 {
1608         SLMP_INFO *info = dev_to_port(dev);
1609         unsigned long flags;
1610
1611         if (debug_level >= DEBUG_LEVEL_INFO)
1612                 printk(KERN_INFO "%s:hdlc_xmit(%s)\n",__FILE__,dev->name);
1613
1614         /* stop sending until this frame completes */
1615         netif_stop_queue(dev);
1616
1617         /* copy data to device buffers */
1618         info->tx_count = skb->len;
1619         tx_load_dma_buffer(info, skb->data, skb->len);
1620
1621         /* update network statistics */
1622         dev->stats.tx_packets++;
1623         dev->stats.tx_bytes += skb->len;
1624
1625         /* done with socket buffer, so free it */
1626         dev_kfree_skb(skb);
1627
1628         /* save start time for transmit timeout detection */
1629         dev->trans_start = jiffies;
1630
1631         /* start hardware transmitter if necessary */
1632         spin_lock_irqsave(&info->lock,flags);
1633         if (!info->tx_active)
1634                 tx_start(info);
1635         spin_unlock_irqrestore(&info->lock,flags);
1636
1637         return NETDEV_TX_OK;
1638 }
1639
1640 /**
1641  * called by network layer when interface enabled
1642  * claim resources and initialize hardware
1643  *
1644  * dev  pointer to network device structure
1645  *
1646  * returns 0 if success, otherwise error code
1647  */
1648 static int hdlcdev_open(struct net_device *dev)
1649 {
1650         SLMP_INFO *info = dev_to_port(dev);
1651         int rc;
1652         unsigned long flags;
1653
1654         if (debug_level >= DEBUG_LEVEL_INFO)
1655                 printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name);
1656
1657         /* generic HDLC layer open processing */
1658         if ((rc = hdlc_open(dev)))
1659                 return rc;
1660
1661         /* arbitrate between network and tty opens */
1662         spin_lock_irqsave(&info->netlock, flags);
1663         if (info->port.count != 0 || info->netcount != 0) {
1664                 printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
1665                 spin_unlock_irqrestore(&info->netlock, flags);
1666                 return -EBUSY;
1667         }
1668         info->netcount=1;
1669         spin_unlock_irqrestore(&info->netlock, flags);
1670
1671         /* claim resources and init adapter */
1672         if ((rc = startup(info)) != 0) {
1673                 spin_lock_irqsave(&info->netlock, flags);
1674                 info->netcount=0;
1675                 spin_unlock_irqrestore(&info->netlock, flags);
1676                 return rc;
1677         }
1678
1679         /* assert RTS and DTR, apply hardware settings */
1680         info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
1681         program_hw(info);
1682
1683         /* enable network layer transmit */
1684         dev->trans_start = jiffies;
1685         netif_start_queue(dev);
1686
1687         /* inform generic HDLC layer of current DCD status */
1688         spin_lock_irqsave(&info->lock, flags);
1689         get_signals(info);
1690         spin_unlock_irqrestore(&info->lock, flags);
1691         if (info->serial_signals & SerialSignal_DCD)
1692                 netif_carrier_on(dev);
1693         else
1694                 netif_carrier_off(dev);
1695         return 0;
1696 }
1697
1698 /**
1699  * called by network layer when interface is disabled
1700  * shutdown hardware and release resources
1701  *
1702  * dev  pointer to network device structure
1703  *
1704  * returns 0 if success, otherwise error code
1705  */
1706 static int hdlcdev_close(struct net_device *dev)
1707 {
1708         SLMP_INFO *info = dev_to_port(dev);
1709         unsigned long flags;
1710
1711         if (debug_level >= DEBUG_LEVEL_INFO)
1712                 printk("%s:hdlcdev_close(%s)\n",__FILE__,dev->name);
1713
1714         netif_stop_queue(dev);
1715
1716         /* shutdown adapter and release resources */
1717         shutdown(info);
1718
1719         hdlc_close(dev);
1720
1721         spin_lock_irqsave(&info->netlock, flags);
1722         info->netcount=0;
1723         spin_unlock_irqrestore(&info->netlock, flags);
1724
1725         return 0;
1726 }
1727
1728 /**
1729  * called by network layer to process IOCTL call to network device
1730  *
1731  * dev  pointer to network device structure
1732  * ifr  pointer to network interface request structure
1733  * cmd  IOCTL command code
1734  *
1735  * returns 0 if success, otherwise error code
1736  */
1737 static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
1738 {
1739         const size_t size = sizeof(sync_serial_settings);
1740         sync_serial_settings new_line;
1741         sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
1742         SLMP_INFO *info = dev_to_port(dev);
1743         unsigned int flags;
1744
1745         if (debug_level >= DEBUG_LEVEL_INFO)
1746                 printk("%s:hdlcdev_ioctl(%s)\n",__FILE__,dev->name);
1747
1748         /* return error if TTY interface open */
1749         if (info->port.count)
1750                 return -EBUSY;
1751
1752         if (cmd != SIOCWANDEV)
1753                 return hdlc_ioctl(dev, ifr, cmd);
1754
1755         switch(ifr->ifr_settings.type) {
1756         case IF_GET_IFACE: /* return current sync_serial_settings */
1757
1758                 ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
1759                 if (ifr->ifr_settings.size < size) {
1760                         ifr->ifr_settings.size = size; /* data size wanted */
1761                         return -ENOBUFS;
1762                 }
1763
1764                 flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1765                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1766                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1767                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1768
1769                 memset(&new_line, 0, sizeof(new_line));
1770                 switch (flags){
1771                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
1772                 case (HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_INT; break;
1773                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG):    new_line.clock_type = CLOCK_TXINT; break;
1774                 case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
1775                 default: new_line.clock_type = CLOCK_DEFAULT;
1776                 }
1777
1778                 new_line.clock_rate = info->params.clock_speed;
1779                 new_line.loopback   = info->params.loopback ? 1:0;
1780
1781                 if (copy_to_user(line, &new_line, size))
1782                         return -EFAULT;
1783                 return 0;
1784
1785         case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
1786
1787                 if(!capable(CAP_NET_ADMIN))
1788                         return -EPERM;
1789                 if (copy_from_user(&new_line, line, size))
1790                         return -EFAULT;
1791
1792                 switch (new_line.clock_type)
1793                 {
1794                 case CLOCK_EXT:      flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
1795                 case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
1796                 case CLOCK_INT:      flags = HDLC_FLAG_RXC_BRG    | HDLC_FLAG_TXC_BRG;    break;
1797                 case CLOCK_TXINT:    flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG;    break;
1798                 case CLOCK_DEFAULT:  flags = info->params.flags &
1799                                              (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1800                                               HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1801                                               HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1802                                               HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN); break;
1803                 default: return -EINVAL;
1804                 }
1805
1806                 if (new_line.loopback != 0 && new_line.loopback != 1)
1807                         return -EINVAL;
1808
1809                 info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
1810                                         HDLC_FLAG_RXC_BRG    | HDLC_FLAG_RXC_TXCPIN |
1811                                         HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
1812                                         HDLC_FLAG_TXC_BRG    | HDLC_FLAG_TXC_RXCPIN);
1813                 info->params.flags |= flags;
1814
1815                 info->params.loopback = new_line.loopback;
1816
1817                 if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
1818                         info->params.clock_speed = new_line.clock_rate;
1819                 else
1820                         info->params.clock_speed = 0;
1821
1822                 /* if network interface up, reprogram hardware */
1823                 if (info->netcount)
1824                         program_hw(info);
1825                 return 0;
1826
1827         default:
1828                 return hdlc_ioctl(dev, ifr, cmd);
1829         }
1830 }
1831
1832 /**
1833  * called by network layer when transmit timeout is detected
1834  *
1835  * dev  pointer to network device structure
1836  */
1837 static void hdlcdev_tx_timeout(struct net_device *dev)
1838 {
1839         SLMP_INFO *info = dev_to_port(dev);
1840         unsigned long flags;
1841
1842         if (debug_level >= DEBUG_LEVEL_INFO)
1843                 printk("hdlcdev_tx_timeout(%s)\n",dev->name);
1844
1845         dev->stats.tx_errors++;
1846         dev->stats.tx_aborted_errors++;
1847
1848         spin_lock_irqsave(&info->lock,flags);
1849         tx_stop(info);
1850         spin_unlock_irqrestore(&info->lock,flags);
1851
1852         netif_wake_queue(dev);
1853 }
1854
1855 /**
1856  * called by device driver when transmit completes
1857  * reenable network layer transmit if stopped
1858  *
1859  * info  pointer to device instance information
1860  */
1861 static void hdlcdev_tx_done(SLMP_INFO *info)
1862 {
1863         if (netif_queue_stopped(info->netdev))
1864                 netif_wake_queue(info->netdev);
1865 }
1866
1867 /**
1868  * called by device driver when frame received
1869  * pass frame to network layer
1870  *
1871  * info  pointer to device instance information
1872  * buf   pointer to buffer contianing frame data
1873  * size  count of data bytes in buf
1874  */
1875 static void hdlcdev_rx(SLMP_INFO *info, char *buf, int size)
1876 {
1877         struct sk_buff *skb = dev_alloc_skb(size);
1878         struct net_device *dev = info->netdev;
1879
1880         if (debug_level >= DEBUG_LEVEL_INFO)
1881                 printk("hdlcdev_rx(%s)\n",dev->name);
1882
1883         if (skb == NULL) {
1884                 printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n",
1885                        dev->name);
1886                 dev->stats.rx_dropped++;
1887                 return;
1888         }
1889
1890         memcpy(skb_put(skb, size), buf, size);
1891
1892         skb->protocol = hdlc_type_trans(skb, dev);
1893
1894         dev->stats.rx_packets++;
1895         dev->stats.rx_bytes += size;
1896
1897         netif_rx(skb);
1898 }
1899
1900 static const struct net_device_ops hdlcdev_ops = {
1901         .ndo_open       = hdlcdev_open,
1902         .ndo_stop       = hdlcdev_close,
1903         .ndo_change_mtu = hdlc_change_mtu,
1904         .ndo_start_xmit = hdlc_start_xmit,
1905         .ndo_do_ioctl   = hdlcdev_ioctl,
1906         .ndo_tx_timeout = hdlcdev_tx_timeout,
1907 };
1908
1909 /**
1910  * called by device driver when adding device instance
1911  * do generic HDLC initialization
1912  *
1913  * info  pointer to device instance information
1914  *
1915  * returns 0 if success, otherwise error code
1916  */
1917 static int hdlcdev_init(SLMP_INFO *info)
1918 {
1919         int rc;
1920         struct net_device *dev;
1921         hdlc_device *hdlc;
1922
1923         /* allocate and initialize network and HDLC layer objects */
1924
1925         if (!(dev = alloc_hdlcdev(info))) {
1926                 printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__);
1927                 return -ENOMEM;
1928         }
1929
1930         /* for network layer reporting purposes only */
1931         dev->mem_start = info->phys_sca_base;
1932         dev->mem_end   = info->phys_sca_base + SCA_BASE_SIZE - 1;
1933         dev->irq       = info->irq_level;
1934
1935         /* network layer callbacks and settings */
1936         dev->netdev_ops     = &hdlcdev_ops;
1937         dev->watchdog_timeo = 10 * HZ;
1938         dev->tx_queue_len   = 50;
1939
1940         /* generic HDLC layer callbacks and settings */
1941         hdlc         = dev_to_hdlc(dev);
1942         hdlc->attach = hdlcdev_attach;
1943         hdlc->xmit   = hdlcdev_xmit;
1944
1945         /* register objects with HDLC layer */
1946         if ((rc = register_hdlc_device(dev))) {
1947                 printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__);
1948                 free_netdev(dev);
1949                 return rc;
1950         }
1951
1952         info->netdev = dev;
1953         return 0;
1954 }
1955
1956 /**
1957  * called by device driver when removing device instance
1958  * do generic HDLC cleanup
1959  *
1960  * info  pointer to device instance information
1961  */
1962 static void hdlcdev_exit(SLMP_INFO *info)
1963 {
1964         unregister_hdlc_device(info->netdev);
1965         free_netdev(info->netdev);
1966         info->netdev = NULL;
1967 }
1968
1969 #endif /* CONFIG_HDLC */
1970
1971
1972 /* Return next bottom half action to perform.
1973  * Return Value:        BH action code or 0 if nothing to do.
1974  */
1975 static int bh_action(SLMP_INFO *info)
1976 {
1977         unsigned long flags;
1978         int rc = 0;
1979
1980         spin_lock_irqsave(&info->lock,flags);
1981
1982         if (info->pending_bh & BH_RECEIVE) {
1983                 info->pending_bh &= ~BH_RECEIVE;
1984                 rc = BH_RECEIVE;
1985         } else if (info->pending_bh & BH_TRANSMIT) {
1986                 info->pending_bh &= ~BH_TRANSMIT;
1987                 rc = BH_TRANSMIT;
1988         } else if (info->pending_bh & BH_STATUS) {
1989                 info->pending_bh &= ~BH_STATUS;
1990                 rc = BH_STATUS;
1991         }
1992
1993         if (!rc) {
1994                 /* Mark BH routine as complete */
1995                 info->bh_running = false;
1996                 info->bh_requested = false;
1997         }
1998
1999         spin_unlock_irqrestore(&info->lock,flags);
2000
2001         return rc;
2002 }
2003
2004 /* Perform bottom half processing of work items queued by ISR.
2005  */
2006 static void bh_handler(struct work_struct *work)
2007 {
2008         SLMP_INFO *info = container_of(work, SLMP_INFO, task);
2009         int action;
2010
2011         if ( debug_level >= DEBUG_LEVEL_BH )
2012                 printk( "%s(%d):%s bh_handler() entry\n",
2013                         __FILE__,__LINE__,info->device_name);
2014
2015         info->bh_running = true;
2016
2017         while((action = bh_action(info)) != 0) {
2018
2019                 /* Process work item */
2020                 if ( debug_level >= DEBUG_LEVEL_BH )
2021                         printk( "%s(%d):%s bh_handler() work item action=%d\n",
2022                                 __FILE__,__LINE__,info->device_name, action);
2023
2024                 switch (action) {
2025
2026                 case BH_RECEIVE:
2027                         bh_receive(info);
2028                         break;
2029                 case BH_TRANSMIT:
2030                         bh_transmit(info);
2031                         break;
2032                 case BH_STATUS:
2033                         bh_status(info);
2034                         break;
2035                 default:
2036                         /* unknown work item ID */
2037                         printk("%s(%d):%s Unknown work item ID=%08X!\n",
2038                                 __FILE__,__LINE__,info->device_name,action);
2039                         break;
2040                 }
2041         }
2042
2043         if ( debug_level >= DEBUG_LEVEL_BH )
2044                 printk( "%s(%d):%s bh_handler() exit\n",
2045                         __FILE__,__LINE__,info->device_name);
2046 }
2047
2048 static void bh_receive(SLMP_INFO *info)
2049 {
2050         if ( debug_level >= DEBUG_LEVEL_BH )
2051                 printk( "%s(%d):%s bh_receive()\n",
2052                         __FILE__,__LINE__,info->device_name);
2053
2054         while( rx_get_frame(info) );
2055 }
2056
2057 static void bh_transmit(SLMP_INFO *info)
2058 {
2059         struct tty_struct *tty = info->port.tty;
2060
2061         if ( debug_level >= DEBUG_LEVEL_BH )
2062                 printk( "%s(%d):%s bh_transmit() entry\n",
2063                         __FILE__,__LINE__,info->device_name);
2064
2065         if (tty)
2066                 tty_wakeup(tty);
2067 }
2068
2069 static void bh_status(SLMP_INFO *info)
2070 {
2071         if ( debug_level >= DEBUG_LEVEL_BH )
2072                 printk( "%s(%d):%s bh_status() entry\n",
2073                         __FILE__,__LINE__,info->device_name);
2074
2075         info->ri_chkcount = 0;
2076         info->dsr_chkcount = 0;
2077         info->dcd_chkcount = 0;
2078         info->cts_chkcount = 0;
2079 }
2080
2081 static void isr_timer(SLMP_INFO * info)
2082 {
2083         unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
2084
2085         /* IER2<7..4> = timer<3..0> interrupt enables (0=disabled) */
2086         write_reg(info, IER2, 0);
2087
2088         /* TMCS, Timer Control/Status Register
2089          *
2090          * 07      CMF, Compare match flag (read only) 1=match
2091          * 06      ECMI, CMF Interrupt Enable: 0=disabled
2092          * 05      Reserved, must be 0
2093          * 04      TME, Timer Enable
2094          * 03..00  Reserved, must be 0
2095          *
2096          * 0000 0000
2097          */
2098         write_reg(info, (unsigned char)(timer + TMCS), 0);
2099
2100         info->irq_occurred = true;
2101
2102         if ( debug_level >= DEBUG_LEVEL_ISR )
2103                 printk("%s(%d):%s isr_timer()\n",
2104                         __FILE__,__LINE__,info->device_name);
2105 }
2106
2107 static void isr_rxint(SLMP_INFO * info)
2108 {
2109         struct tty_struct *tty = info->port.tty;
2110         struct  mgsl_icount *icount = &info->icount;
2111         unsigned char status = read_reg(info, SR1) & info->ie1_value & (FLGD + IDLD + CDCD + BRKD);
2112         unsigned char status2 = read_reg(info, SR2) & info->ie2_value & OVRN;
2113
2114         /* clear status bits */
2115         if (status)
2116                 write_reg(info, SR1, status);
2117
2118         if (status2)
2119                 write_reg(info, SR2, status2);
2120
2121         if ( debug_level >= DEBUG_LEVEL_ISR )
2122                 printk("%s(%d):%s isr_rxint status=%02X %02x\n",
2123                         __FILE__,__LINE__,info->device_name,status,status2);
2124
2125         if (info->params.mode == MGSL_MODE_ASYNC) {
2126                 if (status & BRKD) {
2127                         icount->brk++;
2128
2129                         /* process break detection if tty control
2130                          * is not set to ignore it
2131                          */
2132                         if (!(status & info->ignore_status_mask1)) {
2133                                 if (info->read_status_mask1 & BRKD) {
2134                                         tty_insert_flip_char(&info->port, 0, TTY_BREAK);
2135                                         if (tty && (info->port.flags & ASYNC_SAK))
2136                                                 do_SAK(tty);
2137                                 }
2138                         }
2139                 }
2140         }
2141         else {
2142                 if (status & (FLGD|IDLD)) {
2143                         if (status & FLGD)
2144                                 info->icount.exithunt++;
2145                         else if (status & IDLD)
2146                                 info->icount.rxidle++;
2147                         wake_up_interruptible(&info->event_wait_q);
2148                 }
2149         }
2150
2151         if (status & CDCD) {
2152                 /* simulate a common modem status change interrupt
2153                  * for our handler
2154                  */
2155                 get_signals( info );
2156                 isr_io_pin(info,
2157                         MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD));
2158         }
2159 }
2160
2161 /*
2162  * handle async rx data interrupts
2163  */
2164 static void isr_rxrdy(SLMP_INFO * info)
2165 {
2166         u16 status;
2167         unsigned char DataByte;
2168         struct  mgsl_icount *icount = &info->icount;
2169
2170         if ( debug_level >= DEBUG_LEVEL_ISR )
2171                 printk("%s(%d):%s isr_rxrdy\n",
2172                         __FILE__,__LINE__,info->device_name);
2173
2174         while((status = read_reg(info,CST0)) & BIT0)
2175         {
2176                 int flag = 0;
2177                 bool over = false;
2178                 DataByte = read_reg(info,TRB);
2179
2180                 icount->rx++;
2181
2182                 if ( status & (PE + FRME + OVRN) ) {
2183                         printk("%s(%d):%s rxerr=%04X\n",
2184                                 __FILE__,__LINE__,info->device_name,status);
2185
2186                         /* update error statistics */
2187                         if (status & PE)
2188                                 icount->parity++;
2189                         else if (status & FRME)
2190                                 icount->frame++;
2191                         else if (status & OVRN)
2192                                 icount->overrun++;
2193
2194                         /* discard char if tty control flags say so */
2195                         if (status & info->ignore_status_mask2)
2196                                 continue;
2197
2198                         status &= info->read_status_mask2;
2199
2200                         if (status & PE)
2201                                 flag = TTY_PARITY;
2202                         else if (status & FRME)
2203                                 flag = TTY_FRAME;
2204                         if (status & OVRN) {
2205                                 /* Overrun is special, since it's
2206                                  * reported immediately, and doesn't
2207                                  * affect the current character
2208                                  */
2209                                 over = true;
2210                         }
2211                 }       /* end of if (error) */
2212
2213                 tty_insert_flip_char(&info->port, DataByte, flag);
2214                 if (over)
2215                         tty_insert_flip_char(&info->port, 0, TTY_OVERRUN);
2216         }
2217
2218         if ( debug_level >= DEBUG_LEVEL_ISR ) {
2219                 printk("%s(%d):%s rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
2220                         __FILE__,__LINE__,info->device_name,
2221                         icount->rx,icount->brk,icount->parity,
2222                         icount->frame,icount->overrun);
2223         }
2224
2225         tty_flip_buffer_push(&info->port);
2226 }
2227
2228 static void isr_txeom(SLMP_INFO * info, unsigned char status)
2229 {
2230         if ( debug_level >= DEBUG_LEVEL_ISR )
2231                 printk("%s(%d):%s isr_txeom status=%02x\n",
2232                         __FILE__,__LINE__,info->device_name,status);
2233
2234         write_reg(info, TXDMA + DIR, 0x00); /* disable Tx DMA IRQs */
2235         write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2236         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2237
2238         if (status & UDRN) {
2239                 write_reg(info, CMD, TXRESET);
2240                 write_reg(info, CMD, TXENABLE);
2241         } else
2242                 write_reg(info, CMD, TXBUFCLR);
2243
2244         /* disable and clear tx interrupts */
2245         info->ie0_value &= ~TXRDYE;
2246         info->ie1_value &= ~(IDLE + UDRN);
2247         write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2248         write_reg(info, SR1, (unsigned char)(UDRN + IDLE));
2249
2250         if ( info->tx_active ) {
2251                 if (info->params.mode != MGSL_MODE_ASYNC) {
2252                         if (status & UDRN)
2253                                 info->icount.txunder++;
2254                         else if (status & IDLE)
2255                                 info->icount.txok++;
2256                 }
2257
2258                 info->tx_active = false;
2259                 info->tx_count = info->tx_put = info->tx_get = 0;
2260
2261                 del_timer(&info->tx_timer);
2262
2263                 if (info->params.mode != MGSL_MODE_ASYNC && info->drop_rts_on_tx_done ) {
2264                         info->serial_signals &= ~SerialSignal_RTS;
2265                         info->drop_rts_on_tx_done = false;
2266                         set_signals(info);
2267                 }
2268
2269 #if SYNCLINK_GENERIC_HDLC
2270                 if (info->netcount)
2271                         hdlcdev_tx_done(info);
2272                 else
2273 #endif
2274                 {
2275                         if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2276                                 tx_stop(info);
2277                                 return;
2278                         }
2279                         info->pending_bh |= BH_TRANSMIT;
2280                 }
2281         }
2282 }
2283
2284
2285 /*
2286  * handle tx status interrupts
2287  */
2288 static void isr_txint(SLMP_INFO * info)
2289 {
2290         unsigned char status = read_reg(info, SR1) & info->ie1_value & (UDRN + IDLE + CCTS);
2291
2292         /* clear status bits */
2293         write_reg(info, SR1, status);
2294
2295         if ( debug_level >= DEBUG_LEVEL_ISR )
2296                 printk("%s(%d):%s isr_txint status=%02x\n",
2297                         __FILE__,__LINE__,info->device_name,status);
2298
2299         if (status & (UDRN + IDLE))
2300                 isr_txeom(info, status);
2301
2302         if (status & CCTS) {
2303                 /* simulate a common modem status change interrupt
2304                  * for our handler
2305                  */
2306                 get_signals( info );
2307                 isr_io_pin(info,
2308                         MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS));
2309
2310         }
2311 }
2312
2313 /*
2314  * handle async tx data interrupts
2315  */
2316 static void isr_txrdy(SLMP_INFO * info)
2317 {
2318         if ( debug_level >= DEBUG_LEVEL_ISR )
2319                 printk("%s(%d):%s isr_txrdy() tx_count=%d\n",
2320                         __FILE__,__LINE__,info->device_name,info->tx_count);
2321
2322         if (info->params.mode != MGSL_MODE_ASYNC) {
2323                 /* disable TXRDY IRQ, enable IDLE IRQ */
2324                 info->ie0_value &= ~TXRDYE;
2325                 info->ie1_value |= IDLE;
2326                 write_reg16(info, IE0, (unsigned short)((info->ie1_value << 8) + info->ie0_value));
2327                 return;
2328         }
2329
2330         if (info->port.tty && (info->port.tty->stopped || info->port.tty->hw_stopped)) {
2331                 tx_stop(info);
2332                 return;
2333         }
2334
2335         if ( info->tx_count )
2336                 tx_load_fifo( info );
2337         else {
2338                 info->tx_active = false;
2339                 info->ie0_value &= ~TXRDYE;
2340                 write_reg(info, IE0, info->ie0_value);
2341         }
2342
2343         if (info->tx_count < WAKEUP_CHARS)
2344                 info->pending_bh |= BH_TRANSMIT;
2345 }
2346
2347 static void isr_rxdmaok(SLMP_INFO * info)
2348 {
2349         /* BIT7 = EOT (end of transfer)
2350          * BIT6 = EOM (end of message/frame)
2351          */
2352         unsigned char status = read_reg(info,RXDMA + DSR) & 0xc0;
2353
2354         /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2355         write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2356
2357         if ( debug_level >= DEBUG_LEVEL_ISR )
2358                 printk("%s(%d):%s isr_rxdmaok(), status=%02x\n",
2359                         __FILE__,__LINE__,info->device_name,status);
2360
2361         info->pending_bh |= BH_RECEIVE;
2362 }
2363
2364 static void isr_rxdmaerror(SLMP_INFO * info)
2365 {
2366         /* BIT5 = BOF (buffer overflow)
2367          * BIT4 = COF (counter overflow)
2368          */
2369         unsigned char status = read_reg(info,RXDMA + DSR) & 0x30;
2370
2371         /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2372         write_reg(info, RXDMA + DSR, (unsigned char)(status | 1));
2373
2374         if ( debug_level >= DEBUG_LEVEL_ISR )
2375                 printk("%s(%d):%s isr_rxdmaerror(), status=%02x\n",
2376                         __FILE__,__LINE__,info->device_name,status);
2377
2378         info->rx_overflow = true;
2379         info->pending_bh |= BH_RECEIVE;
2380 }
2381
2382 static void isr_txdmaok(SLMP_INFO * info)
2383 {
2384         unsigned char status_reg1 = read_reg(info, SR1);
2385
2386         write_reg(info, TXDMA + DIR, 0x00);     /* disable Tx DMA IRQs */
2387         write_reg(info, TXDMA + DSR, 0xc0); /* clear IRQs and disable DMA */
2388         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
2389
2390         if ( debug_level >= DEBUG_LEVEL_ISR )
2391                 printk("%s(%d):%s isr_txdmaok(), status=%02x\n",
2392                         __FILE__,__LINE__,info->device_name,status_reg1);
2393
2394         /* program TXRDY as FIFO empty flag, enable TXRDY IRQ */
2395         write_reg16(info, TRC0, 0);
2396         info->ie0_value |= TXRDYE;
2397         write_reg(info, IE0, info->ie0_value);
2398 }
2399
2400 static void isr_txdmaerror(SLMP_INFO * info)
2401 {
2402         /* BIT5 = BOF (buffer overflow)
2403          * BIT4 = COF (counter overflow)
2404          */
2405         unsigned char status = read_reg(info,TXDMA + DSR) & 0x30;
2406
2407         /* clear IRQ (BIT0 must be 1 to prevent clearing DE bit) */
2408         write_reg(info, TXDMA + DSR, (unsigned char)(status | 1));
2409
2410         if ( debug_level >= DEBUG_LEVEL_ISR )
2411                 printk("%s(%d):%s isr_txdmaerror(), status=%02x\n",
2412                         __FILE__,__LINE__,info->device_name,status);
2413 }
2414
2415 /* handle input serial signal changes
2416  */
2417 static void isr_io_pin( SLMP_INFO *info, u16 status )
2418 {
2419         struct  mgsl_icount *icount;
2420
2421         if ( debug_level >= DEBUG_LEVEL_ISR )
2422                 printk("%s(%d):isr_io_pin status=%04X\n",
2423                         __FILE__,__LINE__,status);
2424
2425         if (status & (MISCSTATUS_CTS_LATCHED | MISCSTATUS_DCD_LATCHED |
2426                       MISCSTATUS_DSR_LATCHED | MISCSTATUS_RI_LATCHED) ) {
2427                 icount = &info->icount;
2428                 /* update input line counters */
2429                 if (status & MISCSTATUS_RI_LATCHED) {
2430                         icount->rng++;
2431                         if ( status & SerialSignal_RI )
2432                                 info->input_signal_events.ri_up++;
2433                         else
2434                                 info->input_signal_events.ri_down++;
2435                 }
2436                 if (status & MISCSTATUS_DSR_LATCHED) {
2437                         icount->dsr++;
2438                         if ( status & SerialSignal_DSR )
2439                                 info->input_signal_events.dsr_up++;
2440                         else
2441                                 info->input_signal_events.dsr_down++;
2442                 }
2443                 if (status & MISCSTATUS_DCD_LATCHED) {
2444                         if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2445                                 info->ie1_value &= ~CDCD;
2446                                 write_reg(info, IE1, info->ie1_value);
2447                         }
2448                         icount->dcd++;
2449                         if (status & SerialSignal_DCD) {
2450                                 info->input_signal_events.dcd_up++;
2451                         } else
2452                                 info->input_signal_events.dcd_down++;
2453 #if SYNCLINK_GENERIC_HDLC
2454                         if (info->netcount) {
2455                                 if (status & SerialSignal_DCD)
2456                                         netif_carrier_on(info->netdev);
2457                                 else
2458                                         netif_carrier_off(info->netdev);
2459                         }
2460 #endif
2461                 }
2462                 if (status & MISCSTATUS_CTS_LATCHED)
2463                 {
2464                         if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT) {
2465                                 info->ie1_value &= ~CCTS;
2466                                 write_reg(info, IE1, info->ie1_value);
2467                         }
2468                         icount->cts++;
2469                         if ( status & SerialSignal_CTS )
2470                                 info->input_signal_events.cts_up++;
2471                         else
2472                                 info->input_signal_events.cts_down++;
2473                 }
2474                 wake_up_interruptible(&info->status_event_wait_q);
2475                 wake_up_interruptible(&info->event_wait_q);
2476
2477                 if ( (info->port.flags & ASYNC_CHECK_CD) &&
2478                      (status & MISCSTATUS_DCD_LATCHED) ) {
2479                         if ( debug_level >= DEBUG_LEVEL_ISR )
2480                                 printk("%s CD now %s...", info->device_name,
2481                                        (status & SerialSignal_DCD) ? "on" : "off");
2482                         if (status & SerialSignal_DCD)
2483                                 wake_up_interruptible(&info->port.open_wait);
2484                         else {
2485                                 if ( debug_level >= DEBUG_LEVEL_ISR )
2486                                         printk("doing serial hangup...");
2487                                 if (info->port.tty)
2488                                         tty_hangup(info->port.tty);
2489                         }
2490                 }
2491
2492                 if (tty_port_cts_enabled(&info->port) &&
2493                      (status & MISCSTATUS_CTS_LATCHED) ) {
2494                         if ( info->port.tty ) {
2495                                 if (info->port.tty->hw_stopped) {
2496                                         if (status & SerialSignal_CTS) {
2497                                                 if ( debug_level >= DEBUG_LEVEL_ISR )
2498                                                         printk("CTS tx start...");
2499                                                 info->port.tty->hw_stopped = 0;
2500                                                 tx_start(info);
2501                                                 info->pending_bh |= BH_TRANSMIT;
2502                                                 return;
2503                                         }
2504                                 } else {
2505                                         if (!(status & SerialSignal_CTS)) {
2506                                                 if ( debug_level >= DEBUG_LEVEL_ISR )
2507                                                         printk("CTS tx stop...");
2508                                                 info->port.tty->hw_stopped = 1;
2509                                                 tx_stop(info);
2510                                         }
2511                                 }
2512                         }
2513                 }
2514         }
2515
2516         info->pending_bh |= BH_STATUS;
2517 }
2518
2519 /* Interrupt service routine entry point.
2520  *
2521  * Arguments:
2522  *      irq             interrupt number that caused interrupt
2523  *      dev_id          device ID supplied during interrupt registration
2524  *      regs            interrupted processor context
2525  */
2526 static irqreturn_t synclinkmp_interrupt(int dummy, void *dev_id)
2527 {
2528         SLMP_INFO *info = dev_id;
2529         unsigned char status, status0, status1=0;
2530         unsigned char dmastatus, dmastatus0, dmastatus1=0;
2531         unsigned char timerstatus0, timerstatus1=0;
2532         unsigned char shift;
2533         unsigned int i;
2534         unsigned short tmp;
2535
2536         if ( debug_level >= DEBUG_LEVEL_ISR )
2537                 printk(KERN_DEBUG "%s(%d): synclinkmp_interrupt(%d)entry.\n",
2538                         __FILE__, __LINE__, info->irq_level);
2539
2540         spin_lock(&info->lock);
2541
2542         for(;;) {
2543
2544                 /* get status for SCA0 (ports 0-1) */
2545                 tmp = read_reg16(info, ISR0);   /* get ISR0 and ISR1 in one read */
2546                 status0 = (unsigned char)tmp;
2547                 dmastatus0 = (unsigned char)(tmp>>8);
2548                 timerstatus0 = read_reg(info, ISR2);
2549
2550                 if ( debug_level >= DEBUG_LEVEL_ISR )
2551                         printk(KERN_DEBUG "%s(%d):%s status0=%02x, dmastatus0=%02x, timerstatus0=%02x\n",
2552                                 __FILE__, __LINE__, info->device_name,
2553                                 status0, dmastatus0, timerstatus0);
2554
2555                 if (info->port_count == 4) {
2556                         /* get status for SCA1 (ports 2-3) */
2557                         tmp = read_reg16(info->port_array[2], ISR0);
2558                         status1 = (unsigned char)tmp;
2559                         dmastatus1 = (unsigned char)(tmp>>8);
2560                         timerstatus1 = read_reg(info->port_array[2], ISR2);
2561
2562                         if ( debug_level >= DEBUG_LEVEL_ISR )
2563                                 printk("%s(%d):%s status1=%02x, dmastatus1=%02x, timerstatus1=%02x\n",
2564                                         __FILE__,__LINE__,info->device_name,
2565                                         status1,dmastatus1,timerstatus1);
2566                 }
2567
2568                 if (!status0 && !dmastatus0 && !timerstatus0 &&
2569                          !status1 && !dmastatus1 && !timerstatus1)
2570                         break;
2571
2572                 for(i=0; i < info->port_count ; i++) {
2573                         if (info->port_array[i] == NULL)
2574                                 continue;
2575                         if (i < 2) {
2576                                 status = status0;
2577                                 dmastatus = dmastatus0;
2578                         } else {
2579                                 status = status1;
2580                                 dmastatus = dmastatus1;
2581                         }
2582
2583                         shift = i & 1 ? 4 :0;
2584
2585                         if (status & BIT0 << shift)
2586                                 isr_rxrdy(info->port_array[i]);
2587                         if (status & BIT1 << shift)
2588                                 isr_txrdy(info->port_array[i]);
2589                         if (status & BIT2 << shift)
2590                                 isr_rxint(info->port_array[i]);
2591                         if (status & BIT3 << shift)
2592                                 isr_txint(info->port_array[i]);
2593
2594                         if (dmastatus & BIT0 << shift)
2595                                 isr_rxdmaerror(info->port_array[i]);
2596                         if (dmastatus & BIT1 << shift)
2597                                 isr_rxdmaok(info->port_array[i]);
2598                         if (dmastatus & BIT2 << shift)
2599                                 isr_txdmaerror(info->port_array[i]);
2600                         if (dmastatus & BIT3 << shift)
2601                                 isr_txdmaok(info->port_array[i]);
2602                 }
2603
2604                 if (timerstatus0 & (BIT5 | BIT4))
2605                         isr_timer(info->port_array[0]);
2606                 if (timerstatus0 & (BIT7 | BIT6))
2607                         isr_timer(info->port_array[1]);
2608                 if (timerstatus1 & (BIT5 | BIT4))
2609                         isr_timer(info->port_array[2]);
2610                 if (timerstatus1 & (BIT7 | BIT6))
2611                         isr_timer(info->port_array[3]);
2612         }
2613
2614         for(i=0; i < info->port_count ; i++) {
2615                 SLMP_INFO * port = info->port_array[i];
2616
2617                 /* Request bottom half processing if there's something
2618                  * for it to do and the bh is not already running.
2619                  *
2620                  * Note: startup adapter diags require interrupts.
2621                  * do not request bottom half processing if the
2622                  * device is not open in a normal mode.
2623                  */
2624                 if ( port && (port->port.count || port->netcount) &&
2625                      port->pending_bh && !port->bh_running &&
2626                      !port->bh_requested ) {
2627                         if ( debug_level >= DEBUG_LEVEL_ISR )
2628                                 printk("%s(%d):%s queueing bh task.\n",
2629                                         __FILE__,__LINE__,port->device_name);
2630                         schedule_work(&port->task);
2631                         port->bh_requested = true;
2632                 }
2633         }
2634
2635         spin_unlock(&info->lock);
2636
2637         if ( debug_level >= DEBUG_LEVEL_ISR )
2638                 printk(KERN_DEBUG "%s(%d):synclinkmp_interrupt(%d)exit.\n",
2639                         __FILE__, __LINE__, info->irq_level);
2640         return IRQ_HANDLED;
2641 }
2642
2643 /* Initialize and start device.
2644  */
2645 static int startup(SLMP_INFO * info)
2646 {
2647         if ( debug_level >= DEBUG_LEVEL_INFO )
2648                 printk("%s(%d):%s tx_releaseup()\n",__FILE__,__LINE__,info->device_name);
2649
2650         if (info->port.flags & ASYNC_INITIALIZED)
2651                 return 0;
2652
2653         if (!info->tx_buf) {
2654                 info->tx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
2655                 if (!info->tx_buf) {
2656                         printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
2657                                 __FILE__,__LINE__,info->device_name);
2658                         return -ENOMEM;
2659                 }
2660         }
2661
2662         info->pending_bh = 0;
2663
2664         memset(&info->icount, 0, sizeof(info->icount));
2665
2666         /* program hardware for current parameters */
2667         reset_port(info);
2668
2669         change_params(info);
2670
2671         mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
2672
2673         if (info->port.tty)
2674                 clear_bit(TTY_IO_ERROR, &info->port.tty->flags);
2675
2676         info->port.flags |= ASYNC_INITIALIZED;
2677
2678         return 0;
2679 }
2680
2681 /* Called by close() and hangup() to shutdown hardware
2682  */
2683 static void shutdown(SLMP_INFO * info)
2684 {
2685         unsigned long flags;
2686
2687         if (!(info->port.flags & ASYNC_INITIALIZED))
2688                 return;
2689
2690         if (debug_level >= DEBUG_LEVEL_INFO)
2691                 printk("%s(%d):%s synclinkmp_shutdown()\n",
2692                          __FILE__,__LINE__, info->device_name );
2693
2694         /* clear status wait queue because status changes */
2695         /* can't happen after shutting down the hardware */
2696         wake_up_interruptible(&info->status_event_wait_q);
2697         wake_up_interruptible(&info->event_wait_q);
2698
2699         del_timer(&info->tx_timer);
2700         del_timer(&info->status_timer);
2701
2702         kfree(info->tx_buf);
2703         info->tx_buf = NULL;
2704
2705         spin_lock_irqsave(&info->lock,flags);
2706
2707         reset_port(info);
2708
2709         if (!info->port.tty || info->port.tty->termios.c_cflag & HUPCL) {
2710                 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2711                 set_signals(info);
2712         }
2713
2714         spin_unlock_irqrestore(&info->lock,flags);
2715
2716         if (info->port.tty)
2717                 set_bit(TTY_IO_ERROR, &info->port.tty->flags);
2718
2719         info->port.flags &= ~ASYNC_INITIALIZED;
2720 }
2721
2722 static void program_hw(SLMP_INFO *info)
2723 {
2724         unsigned long flags;
2725
2726         spin_lock_irqsave(&info->lock,flags);
2727
2728         rx_stop(info);
2729         tx_stop(info);
2730
2731         info->tx_count = info->tx_put = info->tx_get = 0;
2732
2733         if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
2734                 hdlc_mode(info);
2735         else
2736                 async_mode(info);
2737
2738         set_signals(info);
2739
2740         info->dcd_chkcount = 0;
2741         info->cts_chkcount = 0;
2742         info->ri_chkcount = 0;
2743         info->dsr_chkcount = 0;
2744
2745         info->ie1_value |= (CDCD|CCTS);
2746         write_reg(info, IE1, info->ie1_value);
2747
2748         get_signals(info);
2749
2750         if (info->netcount || (info->port.tty && info->port.tty->termios.c_cflag & CREAD) )
2751                 rx_start(info);
2752
2753         spin_unlock_irqrestore(&info->lock,flags);
2754 }
2755
2756 /* Reconfigure adapter based on new parameters
2757  */
2758 static void change_params(SLMP_INFO *info)
2759 {
2760         unsigned cflag;
2761         int bits_per_char;
2762
2763         if (!info->port.tty)
2764                 return;
2765
2766         if (debug_level >= DEBUG_LEVEL_INFO)
2767                 printk("%s(%d):%s change_params()\n",
2768                          __FILE__,__LINE__, info->device_name );
2769
2770         cflag = info->port.tty->termios.c_cflag;
2771
2772         /* if B0 rate (hangup) specified then negate RTS and DTR */
2773         /* otherwise assert RTS and DTR */
2774         if (cflag & CBAUD)
2775                 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
2776         else
2777                 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
2778
2779         /* byte size and parity */
2780
2781         switch (cflag & CSIZE) {
2782               case CS5: info->params.data_bits = 5; break;
2783               case CS6: info->params.data_bits = 6; break;
2784               case CS7: info->params.data_bits = 7; break;
2785               case CS8: info->params.data_bits = 8; break;
2786               /* Never happens, but GCC is too dumb to figure it out */
2787               default:  info->params.data_bits = 7; break;
2788               }
2789
2790         if (cflag & CSTOPB)
2791                 info->params.stop_bits = 2;
2792         else
2793                 info->params.stop_bits = 1;
2794
2795         info->params.parity = ASYNC_PARITY_NONE;
2796         if (cflag & PARENB) {
2797                 if (cflag & PARODD)
2798                         info->params.parity = ASYNC_PARITY_ODD;
2799                 else
2800                         info->params.parity = ASYNC_PARITY_EVEN;
2801 #ifdef CMSPAR
2802                 if (cflag & CMSPAR)
2803                         info->params.parity = ASYNC_PARITY_SPACE;
2804 #endif
2805         }
2806
2807         /* calculate number of jiffies to transmit a full
2808          * FIFO (32 bytes) at specified data rate
2809          */
2810         bits_per_char = info->params.data_bits +
2811                         info->params.stop_bits + 1;
2812
2813         /* if port data rate is set to 460800 or less then
2814          * allow tty settings to override, otherwise keep the
2815          * current data rate.
2816          */
2817         if (info->params.data_rate <= 460800) {
2818                 info->params.data_rate = tty_get_baud_rate(info->port.tty);
2819         }
2820
2821         if ( info->params.data_rate ) {
2822                 info->timeout = (32*HZ*bits_per_char) /
2823                                 info->params.data_rate;
2824         }
2825         info->timeout += HZ/50;         /* Add .02 seconds of slop */
2826
2827         if (cflag & CRTSCTS)
2828                 info->port.flags |= ASYNC_CTS_FLOW;
2829         else
2830                 info->port.flags &= ~ASYNC_CTS_FLOW;
2831
2832         if (cflag & CLOCAL)
2833                 info->port.flags &= ~ASYNC_CHECK_CD;
2834         else
2835                 info->port.flags |= ASYNC_CHECK_CD;
2836
2837         /* process tty input control flags */
2838
2839         info->read_status_mask2 = OVRN;
2840         if (I_INPCK(info->port.tty))
2841                 info->read_status_mask2 |= PE | FRME;
2842         if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty))
2843                 info->read_status_mask1 |= BRKD;
2844         if (I_IGNPAR(info->port.tty))
2845                 info->ignore_status_mask2 |= PE | FRME;
2846         if (I_IGNBRK(info->port.tty)) {
2847                 info->ignore_status_mask1 |= BRKD;
2848                 /* If ignoring parity and break indicators, ignore
2849                  * overruns too.  (For real raw support).
2850                  */
2851                 if (I_IGNPAR(info->port.tty))
2852                         info->ignore_status_mask2 |= OVRN;
2853         }
2854
2855         program_hw(info);
2856 }
2857
2858 static int get_stats(SLMP_INFO * info, struct mgsl_icount __user *user_icount)
2859 {
2860         int err;
2861
2862         if (debug_level >= DEBUG_LEVEL_INFO)
2863                 printk("%s(%d):%s get_params()\n",
2864                          __FILE__,__LINE__, info->device_name);
2865
2866         if (!user_icount) {
2867                 memset(&info->icount, 0, sizeof(info->icount));
2868         } else {
2869                 mutex_lock(&info->port.mutex);
2870                 COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
2871                 mutex_unlock(&info->port.mutex);
2872                 if (err)
2873                         return -EFAULT;
2874         }
2875
2876         return 0;
2877 }
2878
2879 static int get_params(SLMP_INFO * info, MGSL_PARAMS __user *user_params)
2880 {
2881         int err;
2882         if (debug_level >= DEBUG_LEVEL_INFO)
2883                 printk("%s(%d):%s get_params()\n",
2884                          __FILE__,__LINE__, info->device_name);
2885
2886         mutex_lock(&info->port.mutex);
2887         COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
2888         mutex_unlock(&info->port.mutex);
2889         if (err) {
2890                 if ( debug_level >= DEBUG_LEVEL_INFO )
2891                         printk( "%s(%d):%s get_params() user buffer copy failed\n",
2892                                 __FILE__,__LINE__,info->device_name);
2893                 return -EFAULT;
2894         }
2895
2896         return 0;
2897 }
2898
2899 static int set_params(SLMP_INFO * info, MGSL_PARAMS __user *new_params)
2900 {
2901         unsigned long flags;
2902         MGSL_PARAMS tmp_params;
2903         int err;
2904
2905         if (debug_level >= DEBUG_LEVEL_INFO)
2906                 printk("%s(%d):%s set_params\n",
2907                         __FILE__,__LINE__,info->device_name );
2908         COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
2909         if (err) {
2910                 if ( debug_level >= DEBUG_LEVEL_INFO )
2911                         printk( "%s(%d):%s set_params() user buffer copy failed\n",
2912                                 __FILE__,__LINE__,info->device_name);
2913                 return -EFAULT;
2914         }
2915
2916         mutex_lock(&info->port.mutex);
2917         spin_lock_irqsave(&info->lock,flags);
2918         memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
2919         spin_unlock_irqrestore(&info->lock,flags);
2920
2921         change_params(info);
2922         mutex_unlock(&info->port.mutex);
2923
2924         return 0;
2925 }
2926
2927 static int get_txidle(SLMP_INFO * info, int __user *idle_mode)
2928 {
2929         int err;
2930
2931         if (debug_level >= DEBUG_LEVEL_INFO)
2932                 printk("%s(%d):%s get_txidle()=%d\n",
2933                          __FILE__,__LINE__, info->device_name, info->idle_mode);
2934
2935         COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
2936         if (err) {
2937                 if ( debug_level >= DEBUG_LEVEL_INFO )
2938                         printk( "%s(%d):%s get_txidle() user buffer copy failed\n",
2939                                 __FILE__,__LINE__,info->device_name);
2940                 return -EFAULT;
2941         }
2942
2943         return 0;
2944 }
2945
2946 static int set_txidle(SLMP_INFO * info, int idle_mode)
2947 {
2948         unsigned long flags;
2949
2950         if (debug_level >= DEBUG_LEVEL_INFO)
2951                 printk("%s(%d):%s set_txidle(%d)\n",
2952                         __FILE__,__LINE__,info->device_name, idle_mode );
2953
2954         spin_lock_irqsave(&info->lock,flags);
2955         info->idle_mode = idle_mode;
2956         tx_set_idle( info );
2957         spin_unlock_irqrestore(&info->lock,flags);
2958         return 0;
2959 }
2960
2961 static int tx_enable(SLMP_INFO * info, int enable)
2962 {
2963         unsigned long flags;
2964
2965         if (debug_level >= DEBUG_LEVEL_INFO)
2966                 printk("%s(%d):%s tx_enable(%d)\n",
2967                         __FILE__,__LINE__,info->device_name, enable);
2968
2969         spin_lock_irqsave(&info->lock,flags);
2970         if ( enable ) {
2971                 if ( !info->tx_enabled ) {
2972                         tx_start(info);
2973                 }
2974         } else {
2975                 if ( info->tx_enabled )
2976                         tx_stop(info);
2977         }
2978         spin_unlock_irqrestore(&info->lock,flags);
2979         return 0;
2980 }
2981
2982 /* abort send HDLC frame
2983  */
2984 static int tx_abort(SLMP_INFO * info)
2985 {
2986         unsigned long flags;
2987
2988         if (debug_level >= DEBUG_LEVEL_INFO)
2989                 printk("%s(%d):%s tx_abort()\n",
2990                         __FILE__,__LINE__,info->device_name);
2991
2992         spin_lock_irqsave(&info->lock,flags);
2993         if ( info->tx_active && info->params.mode == MGSL_MODE_HDLC ) {
2994                 info->ie1_value &= ~UDRN;
2995                 info->ie1_value |= IDLE;
2996                 write_reg(info, IE1, info->ie1_value);  /* disable tx status interrupts */
2997                 write_reg(info, SR1, (unsigned char)(IDLE + UDRN));     /* clear pending */
2998
2999                 write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
3000                 write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
3001
3002                 write_reg(info, CMD, TXABORT);
3003         }
3004         spin_unlock_irqrestore(&info->lock,flags);
3005         return 0;
3006 }
3007
3008 static int rx_enable(SLMP_INFO * info, int enable)
3009 {
3010         unsigned long flags;
3011
3012         if (debug_level >= DEBUG_LEVEL_INFO)
3013                 printk("%s(%d):%s rx_enable(%d)\n",
3014                         __FILE__,__LINE__,info->device_name,enable);
3015
3016         spin_lock_irqsave(&info->lock,flags);
3017         if ( enable ) {
3018                 if ( !info->rx_enabled )
3019                         rx_start(info);
3020         } else {
3021                 if ( info->rx_enabled )
3022                         rx_stop(info);
3023         }
3024         spin_unlock_irqrestore(&info->lock,flags);
3025         return 0;
3026 }
3027
3028 /* wait for specified event to occur
3029  */
3030 static int wait_mgsl_event(SLMP_INFO * info, int __user *mask_ptr)
3031 {
3032         unsigned long flags;
3033         int s;
3034         int rc=0;
3035         struct mgsl_icount cprev, cnow;
3036         int events;
3037         int mask;
3038         struct  _input_signal_events oldsigs, newsigs;
3039         DECLARE_WAITQUEUE(wait, current);
3040
3041         COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
3042         if (rc) {
3043                 return  -EFAULT;
3044         }
3045
3046         if (debug_level >= DEBUG_LEVEL_INFO)
3047                 printk("%s(%d):%s wait_mgsl_event(%d)\n",
3048                         __FILE__,__LINE__,info->device_name,mask);
3049
3050         spin_lock_irqsave(&info->lock,flags);
3051
3052         /* return immediately if state matches requested events */
3053         get_signals(info);
3054         s = info->serial_signals;
3055
3056         events = mask &
3057                 ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
3058                   ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
3059                   ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
3060                   ((s & SerialSignal_RI)  ? MgslEvent_RiActive :MgslEvent_RiInactive) );
3061         if (events) {
3062                 spin_unlock_irqrestore(&info->lock,flags);
3063                 goto exit;
3064         }
3065
3066         /* save current irq counts */
3067         cprev = info->icount;
3068         oldsigs = info->input_signal_events;
3069
3070         /* enable hunt and idle irqs if needed */
3071         if (mask & (MgslEvent_ExitHuntMode+MgslEvent_IdleReceived)) {
3072                 unsigned char oldval = info->ie1_value;
3073                 unsigned char newval = oldval +
3074                          (mask & MgslEvent_ExitHuntMode ? FLGD:0) +
3075                          (mask & MgslEvent_IdleReceived ? IDLD:0);
3076                 if ( oldval != newval ) {
3077                         info->ie1_value = newval;
3078                         write_reg(info, IE1, info->ie1_value);
3079                 }
3080         }
3081
3082         set_current_state(TASK_INTERRUPTIBLE);
3083         add_wait_queue(&info->event_wait_q, &wait);
3084
3085         spin_unlock_irqrestore(&info->lock,flags);
3086
3087         for(;;) {
3088                 schedule();
3089                 if (signal_pending(current)) {
3090                         rc = -ERESTARTSYS;
3091                         break;
3092                 }
3093
3094                 /* get current irq counts */
3095                 spin_lock_irqsave(&info->lock,flags);
3096                 cnow = info->icount;
3097                 newsigs = info->input_signal_events;
3098                 set_current_state(TASK_INTERRUPTIBLE);
3099                 spin_unlock_irqrestore(&info->lock,flags);
3100
3101                 /* if no change, wait aborted for some reason */
3102                 if (newsigs.dsr_up   == oldsigs.dsr_up   &&
3103                     newsigs.dsr_down == oldsigs.dsr_down &&
3104                     newsigs.dcd_up   == oldsigs.dcd_up   &&
3105                     newsigs.dcd_down == oldsigs.dcd_down &&
3106                     newsigs.cts_up   == oldsigs.cts_up   &&
3107                     newsigs.cts_down == oldsigs.cts_down &&
3108                     newsigs.ri_up    == oldsigs.ri_up    &&
3109                     newsigs.ri_down  == oldsigs.ri_down  &&
3110                     cnow.exithunt    == cprev.exithunt   &&
3111                     cnow.rxidle      == cprev.rxidle) {
3112                         rc = -EIO;
3113                         break;
3114                 }
3115
3116                 events = mask &
3117                         ( (newsigs.dsr_up   != oldsigs.dsr_up   ? MgslEvent_DsrActive:0)   +
3118                           (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
3119                           (newsigs.dcd_up   != oldsigs.dcd_up   ? MgslEvent_DcdActive:0)   +
3120                           (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
3121                           (newsigs.cts_up   != oldsigs.cts_up   ? MgslEvent_CtsActive:0)   +
3122                           (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
3123                           (newsigs.ri_up    != oldsigs.ri_up    ? MgslEvent_RiActive:0)    +
3124                           (newsigs.ri_down  != oldsigs.ri_down  ? MgslEvent_RiInactive:0)  +
3125                           (cnow.exithunt    != cprev.exithunt   ? MgslEvent_ExitHuntMode:0) +
3126                           (cnow.rxidle      != cprev.rxidle     ? MgslEvent_IdleReceived:0) );
3127                 if (events)
3128                         break;
3129
3130                 cprev = cnow;
3131                 oldsigs = newsigs;
3132         }
3133
3134         remove_wait_queue(&info->event_wait_q, &wait);
3135         set_current_state(TASK_RUNNING);
3136
3137
3138         if (mask & (MgslEvent_ExitHuntMode + MgslEvent_IdleReceived)) {
3139                 spin_lock_irqsave(&info->lock,flags);
3140                 if (!waitqueue_active(&info->event_wait_q)) {
3141                         /* disable enable exit hunt mode/idle rcvd IRQs */
3142                         info->ie1_value &= ~(FLGD|IDLD);
3143                         write_reg(info, IE1, info->ie1_value);
3144                 }
3145                 spin_unlock_irqrestore(&info->lock,flags);
3146         }
3147 exit:
3148         if ( rc == 0 )
3149                 PUT_USER(rc, events, mask_ptr);
3150
3151         return rc;
3152 }
3153
3154 static int modem_input_wait(SLMP_INFO *info,int arg)
3155 {
3156         unsigned long flags;
3157         int rc;
3158         struct mgsl_icount cprev, cnow;
3159         DECLARE_WAITQUEUE(wait, current);
3160
3161         /* save current irq counts */
3162         spin_lock_irqsave(&info->lock,flags);
3163         cprev = info->icount;
3164         add_wait_queue(&info->status_event_wait_q, &wait);
3165         set_current_state(TASK_INTERRUPTIBLE);
3166         spin_unlock_irqrestore(&info->lock,flags);
3167
3168         for(;;) {
3169                 schedule();
3170                 if (signal_pending(current)) {
3171                         rc = -ERESTARTSYS;
3172                         break;
3173                 }
3174
3175                 /* get new irq counts */
3176                 spin_lock_irqsave(&info->lock,flags);
3177                 cnow = info->icount;
3178                 set_current_state(TASK_INTERRUPTIBLE);
3179                 spin_unlock_irqrestore(&info->lock,flags);
3180
3181                 /* if no change, wait aborted for some reason */
3182                 if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
3183                     cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
3184                         rc = -EIO;
3185                         break;
3186                 }
3187
3188                 /* check for change in caller specified modem input */
3189                 if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
3190                     (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
3191                     (arg & TIOCM_CD  && cnow.dcd != cprev.dcd) ||
3192                     (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
3193                         rc = 0;
3194                         break;
3195                 }
3196
3197                 cprev = cnow;
3198         }
3199         remove_wait_queue(&info->status_event_wait_q, &wait);
3200         set_current_state(TASK_RUNNING);
3201         return rc;
3202 }
3203
3204 /* return the state of the serial control and status signals
3205  */
3206 static int tiocmget(struct tty_struct *tty)
3207 {
3208         SLMP_INFO *info = tty->driver_data;
3209         unsigned int result;
3210         unsigned long flags;
3211
3212         spin_lock_irqsave(&info->lock,flags);
3213         get_signals(info);
3214         spin_unlock_irqrestore(&info->lock,flags);
3215
3216         result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS : 0) |
3217                  ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR : 0) |
3218                  ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR : 0) |
3219                  ((info->serial_signals & SerialSignal_RI)  ? TIOCM_RNG : 0) |
3220                  ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR : 0) |
3221                  ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS : 0);
3222
3223         if (debug_level >= DEBUG_LEVEL_INFO)
3224                 printk("%s(%d):%s tiocmget() value=%08X\n",
3225                          __FILE__,__LINE__, info->device_name, result );
3226         return result;
3227 }
3228
3229 /* set modem control signals (DTR/RTS)
3230  */
3231 static int tiocmset(struct tty_struct *tty,
3232                                         unsigned int set, unsigned int clear)
3233 {
3234         SLMP_INFO *info = tty->driver_data;
3235         unsigned long flags;
3236
3237         if (debug_level >= DEBUG_LEVEL_INFO)
3238                 printk("%s(%d):%s tiocmset(%x,%x)\n",
3239                         __FILE__,__LINE__,info->device_name, set, clear);
3240
3241         if (set & TIOCM_RTS)
3242                 info->serial_signals |= SerialSignal_RTS;
3243         if (set & TIOCM_DTR)
3244                 info->serial_signals |= SerialSignal_DTR;
3245         if (clear & TIOCM_RTS)
3246                 info->serial_signals &= ~SerialSignal_RTS;
3247         if (clear & TIOCM_DTR)
3248                 info->serial_signals &= ~SerialSignal_DTR;
3249
3250         spin_lock_irqsave(&info->lock,flags);
3251         set_signals(info);
3252         spin_unlock_irqrestore(&info->lock,flags);
3253
3254         return 0;
3255 }
3256
3257 static int carrier_raised(struct tty_port *port)
3258 {
3259         SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3260         unsigned long flags;
3261
3262         spin_lock_irqsave(&info->lock,flags);
3263         get_signals(info);
3264         spin_unlock_irqrestore(&info->lock,flags);
3265
3266         return (info->serial_signals & SerialSignal_DCD) ? 1 : 0;
3267 }
3268
3269 static void dtr_rts(struct tty_port *port, int on)
3270 {
3271         SLMP_INFO *info = container_of(port, SLMP_INFO, port);
3272         unsigned long flags;
3273
3274         spin_lock_irqsave(&info->lock,flags);
3275         if (on)
3276                 info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
3277         else
3278                 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
3279         set_signals(info);
3280         spin_unlock_irqrestore(&info->lock,flags);
3281 }
3282
3283 /* Block the current process until the specified port is ready to open.
3284  */
3285 static int block_til_ready(struct tty_struct *tty, struct file *filp,
3286                            SLMP_INFO *info)
3287 {
3288         DECLARE_WAITQUEUE(wait, current);
3289         int             retval;
3290         bool            do_clocal = false;
3291         bool            extra_count = false;
3292         unsigned long   flags;
3293         int             cd;
3294         struct tty_port *port = &info->port;
3295
3296         if (debug_level >= DEBUG_LEVEL_INFO)
3297                 printk("%s(%d):%s block_til_ready()\n",
3298                          __FILE__,__LINE__, tty->driver->name );
3299
3300         if (filp->f_flags & O_NONBLOCK || tty->flags & (1 << TTY_IO_ERROR)){
3301                 /* nonblock mode is set or port is not enabled */
3302                 /* just verify that callout device is not active */
3303                 port->flags |= ASYNC_NORMAL_ACTIVE;
3304                 return 0;
3305         }
3306
3307         if (tty->termios.c_cflag & CLOCAL)
3308                 do_clocal = true;
3309
3310         /* Wait for carrier detect and the line to become
3311          * free (i.e., not in use by the callout).  While we are in
3312          * this loop, port->count is dropped by one, so that
3313          * close() knows when to free things.  We restore it upon
3314          * exit, either normal or abnormal.
3315          */
3316
3317         retval = 0;
3318         add_wait_queue(&port->open_wait, &wait);
3319
3320         if (debug_level >= DEBUG_LEVEL_INFO)
3321                 printk("%s(%d):%s block_til_ready() before block, count=%d\n",
3322                          __FILE__,__LINE__, tty->driver->name, port->count );
3323
3324         spin_lock_irqsave(&info->lock, flags);
3325         if (!tty_hung_up_p(filp)) {
3326                 extra_count = true;
3327                 port->count--;
3328         }
3329         spin_unlock_irqrestore(&info->lock, flags);
3330         port->blocked_open++;
3331
3332         while (1) {
3333                 if (C_BAUD(tty) && test_bit(ASYNCB_INITIALIZED, &port->flags))
3334                         tty_port_raise_dtr_rts(port);
3335
3336                 set_current_state(TASK_INTERRUPTIBLE);
3337
3338                 if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)){
3339                         retval = (port->flags & ASYNC_HUP_NOTIFY) ?
3340                                         -EAGAIN : -ERESTARTSYS;
3341                         break;
3342                 }
3343
3344                 cd = tty_port_carrier_raised(port);
3345
3346                 if (!(port->flags & ASYNC_CLOSING) && (do_clocal || cd))
3347                         break;
3348
3349                 if (signal_pending(current)) {
3350                         retval = -ERESTARTSYS;
3351                         break;
3352                 }
3353
3354                 if (debug_level >= DEBUG_LEVEL_INFO)
3355                         printk("%s(%d):%s block_til_ready() count=%d\n",
3356                                  __FILE__,__LINE__, tty->driver->name, port->count );
3357
3358                 tty_unlock(tty);
3359                 schedule();
3360                 tty_lock(tty);
3361         }
3362
3363         set_current_state(TASK_RUNNING);
3364         remove_wait_queue(&port->open_wait, &wait);
3365
3366         if (extra_count)
3367                 port->count++;
3368         port->blocked_open--;
3369
3370         if (debug_level >= DEBUG_LEVEL_INFO)
3371                 printk("%s(%d):%s block_til_ready() after, count=%d\n",
3372                          __FILE__,__LINE__, tty->driver->name, port->count );
3373
3374         if (!retval)
3375                 port->flags |= ASYNC_NORMAL_ACTIVE;
3376
3377         return retval;
3378 }
3379
3380 static int alloc_dma_bufs(SLMP_INFO *info)
3381 {
3382         unsigned short BuffersPerFrame;
3383         unsigned short BufferCount;
3384
3385         // Force allocation to start at 64K boundary for each port.
3386         // This is necessary because *all* buffer descriptors for a port
3387         // *must* be in the same 64K block. All descriptors on a port
3388         // share a common 'base' address (upper 8 bits of 24 bits) programmed
3389         // into the CBP register.
3390         info->port_array[0]->last_mem_alloc = (SCA_MEM_SIZE/4) * info->port_num;
3391
3392         /* Calculate the number of DMA buffers necessary to hold the */
3393         /* largest allowable frame size. Note: If the max frame size is */
3394         /* not an even multiple of the DMA buffer size then we need to */
3395         /* round the buffer count per frame up one. */
3396
3397         BuffersPerFrame = (unsigned short)(info->max_frame_size/SCABUFSIZE);
3398         if ( info->max_frame_size % SCABUFSIZE )
3399                 BuffersPerFrame++;
3400
3401         /* calculate total number of data buffers (SCABUFSIZE) possible
3402          * in one ports memory (SCA_MEM_SIZE/4) after allocating memory
3403          * for the descriptor list (BUFFERLISTSIZE).
3404          */
3405         BufferCount = (SCA_MEM_SIZE/4 - BUFFERLISTSIZE)/SCABUFSIZE;
3406
3407         /* limit number of buffers to maximum amount of descriptors */
3408         if (BufferCount > BUFFERLISTSIZE/sizeof(SCADESC))
3409                 BufferCount = BUFFERLISTSIZE/sizeof(SCADESC);
3410
3411         /* use enough buffers to transmit one max size frame */
3412         info->tx_buf_count = BuffersPerFrame + 1;
3413
3414         /* never use more than half the available buffers for transmit */
3415         if (info->tx_buf_count > (BufferCount/2))
3416                 info->tx_buf_count = BufferCount/2;
3417
3418         if (info->tx_buf_count > SCAMAXDESC)
3419                 info->tx_buf_count = SCAMAXDESC;
3420
3421         /* use remaining buffers for receive */
3422         info->rx_buf_count = BufferCount - info->tx_buf_count;
3423
3424         if (info->rx_buf_count > SCAMAXDESC)
3425                 info->rx_buf_count = SCAMAXDESC;
3426
3427         if ( debug_level >= DEBUG_LEVEL_INFO )
3428                 printk("%s(%d):%s Allocating %d TX and %d RX DMA buffers.\n",
3429                         __FILE__,__LINE__, info->device_name,
3430                         info->tx_buf_count,info->rx_buf_count);
3431
3432         if ( alloc_buf_list( info ) < 0 ||
3433                 alloc_frame_bufs(info,
3434                                         info->rx_buf_list,
3435                                         info->rx_buf_list_ex,
3436                                         info->rx_buf_count) < 0 ||
3437                 alloc_frame_bufs(info,
3438                                         info->tx_buf_list,
3439                                         info->tx_buf_list_ex,
3440                                         info->tx_buf_count) < 0 ||
3441                 alloc_tmp_rx_buf(info) < 0 ) {
3442                 printk("%s(%d):%s Can't allocate DMA buffer memory\n",
3443                         __FILE__,__LINE__, info->device_name);
3444                 return -ENOMEM;
3445         }
3446
3447         rx_reset_buffers( info );
3448
3449         return 0;
3450 }
3451
3452 /* Allocate DMA buffers for the transmit and receive descriptor lists.
3453  */
3454 static int alloc_buf_list(SLMP_INFO *info)
3455 {
3456         unsigned int i;
3457
3458         /* build list in adapter shared memory */
3459         info->buffer_list = info->memory_base + info->port_array[0]->last_mem_alloc;
3460         info->buffer_list_phys = info->port_array[0]->last_mem_alloc;
3461         info->port_array[0]->last_mem_alloc += BUFFERLISTSIZE;
3462
3463         memset(info->buffer_list, 0, BUFFERLISTSIZE);
3464
3465         /* Save virtual address pointers to the receive and */
3466         /* transmit buffer lists. (Receive 1st). These pointers will */
3467         /* be used by the processor to access the lists. */
3468         info->rx_buf_list = (SCADESC *)info->buffer_list;
3469
3470         info->tx_buf_list = (SCADESC *)info->buffer_list;
3471         info->tx_buf_list += info->rx_buf_count;
3472
3473         /* Build links for circular buffer entry lists (tx and rx)
3474          *
3475          * Note: links are physical addresses read by the SCA device
3476          * to determine the next buffer entry to use.
3477          */
3478
3479         for ( i = 0; i < info->rx_buf_count; i++ ) {
3480                 /* calculate and store physical address of this buffer entry */
3481                 info->rx_buf_list_ex[i].phys_entry =
3482                         info->buffer_list_phys + (i * SCABUFSIZE);
3483
3484                 /* calculate and store physical address of */
3485                 /* next entry in cirular list of entries */
3486                 info->rx_buf_list[i].next = info->buffer_list_phys;
3487                 if ( i < info->rx_buf_count - 1 )
3488                         info->rx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3489
3490                 info->rx_buf_list[i].length = SCABUFSIZE;
3491         }
3492
3493         for ( i = 0; i < info->tx_buf_count; i++ ) {
3494                 /* calculate and store physical address of this buffer entry */
3495                 info->tx_buf_list_ex[i].phys_entry = info->buffer_list_phys +
3496                         ((info->rx_buf_count + i) * sizeof(SCADESC));
3497
3498                 /* calculate and store physical address of */
3499                 /* next entry in cirular list of entries */
3500
3501                 info->tx_buf_list[i].next = info->buffer_list_phys +
3502                         info->rx_buf_count * sizeof(SCADESC);
3503
3504                 if ( i < info->tx_buf_count - 1 )
3505                         info->tx_buf_list[i].next += (i + 1) * sizeof(SCADESC);
3506         }
3507
3508         return 0;
3509 }
3510
3511 /* Allocate the frame DMA buffers used by the specified buffer list.
3512  */
3513 static int alloc_frame_bufs(SLMP_INFO *info, SCADESC *buf_list,SCADESC_EX *buf_list_ex,int count)
3514 {
3515         int i;
3516         unsigned long phys_addr;
3517
3518         for ( i = 0; i < count; i++ ) {
3519                 buf_list_ex[i].virt_addr = info->memory_base + info->port_array[0]->last_mem_alloc;
3520                 phys_addr = info->port_array[0]->last_mem_alloc;
3521                 info->port_array[0]->last_mem_alloc += SCABUFSIZE;
3522
3523                 buf_list[i].buf_ptr  = (unsigned short)phys_addr;
3524                 buf_list[i].buf_base = (unsigned char)(phys_addr >> 16);
3525         }
3526
3527         return 0;
3528 }
3529
3530 static void free_dma_bufs(SLMP_INFO *info)
3531 {
3532         info->buffer_list = NULL;
3533         info->rx_buf_list = NULL;
3534         info->tx_buf_list = NULL;
3535 }
3536
3537 /* allocate buffer large enough to hold max_frame_size.
3538  * This buffer is used to pass an assembled frame to the line discipline.
3539  */
3540 static int alloc_tmp_rx_buf(SLMP_INFO *info)
3541 {
3542         info->tmp_rx_buf = kmalloc(info->max_frame_size, GFP_KERNEL);
3543         if (info->tmp_rx_buf == NULL)
3544                 return -ENOMEM;
3545         /* unused flag buffer to satisfy receive_buf calling interface */
3546         info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
3547         if (!info->flag_buf) {
3548                 kfree(info->tmp_rx_buf);
3549                 info->tmp_rx_buf = NULL;
3550                 return -ENOMEM;
3551         }
3552         return 0;
3553 }
3554
3555 static void free_tmp_rx_buf(SLMP_INFO *info)
3556 {
3557         kfree(info->tmp_rx_buf);
3558         info->tmp_rx_buf = NULL;
3559         kfree(info->flag_buf);
3560         info->flag_buf = NULL;
3561 }
3562
3563 static int claim_resources(SLMP_INFO *info)
3564 {
3565         if (request_mem_region(info->phys_memory_base,SCA_MEM_SIZE,"synclinkmp") == NULL) {
3566                 printk( "%s(%d):%s mem addr conflict, Addr=%08X\n",
3567                         __FILE__,__LINE__,info->device_name, info->phys_memory_base);
3568                 info->init_error = DiagStatus_AddressConflict;
3569                 goto errout;
3570         }
3571         else
3572                 info->shared_mem_requested = true;
3573
3574         if (request_mem_region(info->phys_lcr_base + info->lcr_offset,128,"synclinkmp") == NULL) {
3575                 printk( "%s(%d):%s lcr mem addr conflict, Addr=%08X\n",
3576                         __FILE__,__LINE__,info->device_name, info->phys_lcr_base);
3577                 info->init_error = DiagStatus_AddressConflict;
3578                 goto errout;
3579         }
3580         else
3581                 info->lcr_mem_requested = true;
3582
3583         if (request_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE,"synclinkmp") == NULL) {
3584                 printk( "%s(%d):%s sca mem addr conflict, Addr=%08X\n",
3585                         __FILE__,__LINE__,info->device_name, info->phys_sca_base);
3586                 info->init_error = DiagStatus_AddressConflict;
3587                 goto errout;
3588         }
3589         else
3590                 info->sca_base_requested = true;
3591
3592         if (request_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE,"synclinkmp") == NULL) {
3593                 printk( "%s(%d):%s stat/ctrl mem addr conflict, Addr=%08X\n",
3594                         __FILE__,__LINE__,info->device_name, info->phys_statctrl_base);
3595                 info->init_error = DiagStatus_AddressConflict;
3596                 goto errout;
3597         }
3598         else
3599                 info->sca_statctrl_requested = true;
3600
3601         info->memory_base = ioremap_nocache(info->phys_memory_base,
3602                                                                 SCA_MEM_SIZE);
3603         if (!info->memory_base) {
3604                 printk( "%s(%d):%s Can't map shared memory, MemAddr=%08X\n",
3605                         __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3606                 info->init_error = DiagStatus_CantAssignPciResources;
3607                 goto errout;
3608         }
3609
3610         info->lcr_base = ioremap_nocache(info->phys_lcr_base, PAGE_SIZE);
3611         if (!info->lcr_base) {
3612                 printk( "%s(%d):%s Can't map LCR memory, MemAddr=%08X\n",
3613                         __FILE__,__LINE__,info->device_name, info->phys_lcr_base );
3614                 info->init_error = DiagStatus_CantAssignPciResources;
3615                 goto errout;
3616         }
3617         info->lcr_base += info->lcr_offset;
3618
3619         info->sca_base = ioremap_nocache(info->phys_sca_base, PAGE_SIZE);
3620         if (!info->sca_base) {
3621                 printk( "%s(%d):%s Can't map SCA memory, MemAddr=%08X\n",
3622                         __FILE__,__LINE__,info->device_name, info->phys_sca_base );
3623                 info->init_error = DiagStatus_CantAssignPciResources;
3624                 goto errout;
3625         }
3626         info->sca_base += info->sca_offset;
3627
3628         info->statctrl_base = ioremap_nocache(info->phys_statctrl_base,
3629                                                                 PAGE_SIZE);
3630         if (!info->statctrl_base) {
3631                 printk( "%s(%d):%s Can't map SCA Status/Control memory, MemAddr=%08X\n",
3632                         __FILE__,__LINE__,info->device_name, info->phys_statctrl_base );
3633                 info->init_error = DiagStatus_CantAssignPciResources;
3634                 goto errout;
3635         }
3636         info->statctrl_base += info->statctrl_offset;
3637
3638         if ( !memory_test(info) ) {
3639                 printk( "%s(%d):Shared Memory Test failed for device %s MemAddr=%08X\n",
3640                         __FILE__,__LINE__,info->device_name, info->phys_memory_base );
3641                 info->init_error = DiagStatus_MemoryError;
3642                 goto errout;
3643         }
3644
3645         return 0;
3646
3647 errout:
3648         release_resources( info );
3649         return -ENODEV;
3650 }
3651
3652 static void release_resources(SLMP_INFO *info)
3653 {
3654         if ( debug_level >= DEBUG_LEVEL_INFO )
3655                 printk( "%s(%d):%s release_resources() entry\n",
3656                         __FILE__,__LINE__,info->device_name );
3657
3658         if ( info->irq_requested ) {
3659                 free_irq(info->irq_level, info);
3660                 info->irq_requested = false;
3661         }
3662
3663         if ( info->shared_mem_requested ) {
3664                 release_mem_region(info->phys_memory_base,SCA_MEM_SIZE);
3665                 info->shared_mem_requested = false;
3666         }
3667         if ( info->lcr_mem_requested ) {
3668                 release_mem_region(info->phys_lcr_base + info->lcr_offset,128);
3669                 info->lcr_mem_requested = false;
3670         }
3671         if ( info->sca_base_requested ) {
3672                 release_mem_region(info->phys_sca_base + info->sca_offset,SCA_BASE_SIZE);
3673                 info->sca_base_requested = false;
3674         }
3675         if ( info->sca_statctrl_requested ) {
3676                 release_mem_region(info->phys_statctrl_base + info->statctrl_offset,SCA_REG_SIZE);
3677                 info->sca_statctrl_requested = false;
3678         }
3679
3680         if (info->memory_base){
3681                 iounmap(info->memory_base);
3682                 info->memory_base = NULL;
3683         }
3684
3685         if (info->sca_base) {
3686                 iounmap(info->sca_base - info->sca_offset);
3687                 info->sca_base=NULL;
3688         }
3689
3690         if (info->statctrl_base) {
3691                 iounmap(info->statctrl_base - info->statctrl_offset);
3692                 info->statctrl_base=NULL;
3693         }
3694
3695         if (info->lcr_base){
3696                 iounmap(info->lcr_base - info->lcr_offset);
3697                 info->lcr_base = NULL;
3698         }
3699
3700         if ( debug_level >= DEBUG_LEVEL_INFO )
3701                 printk( "%s(%d):%s release_resources() exit\n",
3702                         __FILE__,__LINE__,info->device_name );
3703 }
3704
3705 /* Add the specified device instance data structure to the
3706  * global linked list of devices and increment the device count.
3707  */
3708 static void add_device(SLMP_INFO *info)
3709 {
3710         info->next_device = NULL;
3711         info->line = synclinkmp_device_count;
3712         sprintf(info->device_name,"ttySLM%dp%d",info->adapter_num,info->port_num);
3713
3714         if (info->line < MAX_DEVICES) {
3715                 if (maxframe[info->line])
3716                         info->max_frame_size = maxframe[info->line];
3717         }
3718
3719         synclinkmp_device_count++;
3720
3721         if ( !synclinkmp_device_list )
3722                 synclinkmp_device_list = info;
3723         else {
3724                 SLMP_INFO *current_dev = synclinkmp_device_list;
3725                 while( current_dev->next_device )
3726                         current_dev = current_dev->next_device;
3727                 current_dev->next_device = info;
3728         }
3729
3730         if ( info->max_frame_size < 4096 )
3731                 info->max_frame_size = 4096;
3732         else if ( info->max_frame_size > 65535 )
3733                 info->max_frame_size = 65535;
3734
3735         printk( "SyncLink MultiPort %s: "
3736                 "Mem=(%08x %08X %08x %08X) IRQ=%d MaxFrameSize=%u\n",
3737                 info->device_name,
3738                 info->phys_sca_base,
3739                 info->phys_memory_base,
3740                 info->phys_statctrl_base,
3741                 info->phys_lcr_base,
3742                 info->irq_level,
3743                 info->max_frame_size );
3744
3745 #if SYNCLINK_GENERIC_HDLC
3746         hdlcdev_init(info);
3747 #endif
3748 }
3749
3750 static const struct tty_port_operations port_ops = {
3751         .carrier_raised = carrier_raised,
3752         .dtr_rts = dtr_rts,
3753 };
3754
3755 /* Allocate and initialize a device instance structure
3756  *
3757  * Return Value:        pointer to SLMP_INFO if success, otherwise NULL
3758  */
3759 static SLMP_INFO *alloc_dev(int adapter_num, int port_num, struct pci_dev *pdev)
3760 {
3761         SLMP_INFO *info;
3762
3763         info = kzalloc(sizeof(SLMP_INFO),
3764                  GFP_KERNEL);
3765
3766         if (!info) {
3767                 printk("%s(%d) Error can't allocate device instance data for adapter %d, port %d\n",
3768                         __FILE__,__LINE__, adapter_num, port_num);
3769         } else {
3770                 tty_port_init(&info->port);
3771                 info->port.ops = &port_ops;
3772                 info->magic = MGSL_MAGIC;
3773                 INIT_WORK(&info->task, bh_handler);
3774                 info->max_frame_size = 4096;
3775                 info->port.close_delay = 5*HZ/10;
3776                 info->port.closing_wait = 30*HZ;
3777                 init_waitqueue_head(&info->status_event_wait_q);
3778                 init_waitqueue_head(&info->event_wait_q);
3779                 spin_lock_init(&info->netlock);
3780                 memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
3781                 info->idle_mode = HDLC_TXIDLE_FLAGS;
3782                 info->adapter_num = adapter_num;
3783                 info->port_num = port_num;
3784
3785                 /* Copy configuration info to device instance data */
3786                 info->irq_level = pdev->irq;
3787                 info->phys_lcr_base = pci_resource_start(pdev,0);
3788                 info->phys_sca_base = pci_resource_start(pdev,2);
3789                 info->phys_memory_base = pci_resource_start(pdev,3);
3790                 info->phys_statctrl_base = pci_resource_start(pdev,4);
3791
3792                 /* Because veremap only works on page boundaries we must map
3793                  * a larger area than is actually implemented for the LCR
3794                  * memory range. We map a full page starting at the page boundary.
3795                  */
3796                 info->lcr_offset    = info->phys_lcr_base & (PAGE_SIZE-1);
3797                 info->phys_lcr_base &= ~(PAGE_SIZE-1);
3798
3799                 info->sca_offset    = info->phys_sca_base & (PAGE_SIZE-1);
3800                 info->phys_sca_base &= ~(PAGE_SIZE-1);
3801
3802                 info->statctrl_offset    = info->phys_statctrl_base & (PAGE_SIZE-1);
3803                 info->phys_statctrl_base &= ~(PAGE_SIZE-1);
3804
3805                 info->bus_type = MGSL_BUS_TYPE_PCI;
3806                 info->irq_flags = IRQF_SHARED;
3807
3808                 setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
3809                 setup_timer(&info->status_timer, status_timeout,
3810                                 (unsigned long)info);
3811
3812                 /* Store the PCI9050 misc control register value because a flaw
3813                  * in the PCI9050 prevents LCR registers from being read if
3814                  * BIOS assigns an LCR base address with bit 7 set.
3815                  *
3816                  * Only the misc control register is accessed for which only
3817                  * write access is needed, so set an initial value and change
3818                  * bits to the device instance data as we write the value
3819                  * to the actual misc control register.
3820                  */
3821                 info->misc_ctrl_value = 0x087e4546;
3822
3823                 /* initial port state is unknown - if startup errors
3824                  * occur, init_error will be set to indicate the
3825                  * problem. Once the port is fully initialized,
3826                  * this value will be set to 0 to indicate the
3827                  * port is available.
3828                  */
3829                 info->init_error = -1;
3830         }
3831
3832         return info;
3833 }
3834
3835 static void device_init(int adapter_num, struct pci_dev *pdev)
3836 {
3837         SLMP_INFO *port_array[SCA_MAX_PORTS];
3838         int port;
3839
3840         /* allocate device instances for up to SCA_MAX_PORTS devices */
3841         for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3842                 port_array[port] = alloc_dev(adapter_num,port,pdev);
3843                 if( port_array[port] == NULL ) {
3844                         for (--port; port >= 0; --port) {
3845                                 tty_port_destroy(&port_array[port]->port);
3846                                 kfree(port_array[port]);
3847                         }
3848                         return;
3849                 }
3850         }
3851
3852         /* give copy of port_array to all ports and add to device list  */
3853         for ( port = 0; port < SCA_MAX_PORTS; ++port ) {
3854                 memcpy(port_array[port]->port_array,port_array,sizeof(port_array));
3855                 add_device( port_array[port] );
3856                 spin_lock_init(&port_array[port]->lock);
3857         }
3858
3859         /* Allocate and claim adapter resources */
3860         if ( !claim_resources(port_array[0]) ) {
3861
3862                 alloc_dma_bufs(port_array[0]);
3863
3864                 /* copy resource information from first port to others */
3865                 for ( port = 1; port < SCA_MAX_PORTS; ++port ) {
3866                         port_array[port]->lock  = port_array[0]->lock;
3867                         port_array[port]->irq_level     = port_array[0]->irq_level;
3868                         port_array[port]->memory_base   = port_array[0]->memory_base;
3869                         port_array[port]->sca_base      = port_array[0]->sca_base;
3870                         port_array[port]->statctrl_base = port_array[0]->statctrl_base;
3871                         port_array[port]->lcr_base      = port_array[0]->lcr_base;
3872                         alloc_dma_bufs(port_array[port]);
3873                 }
3874
3875                 if ( request_irq(port_array[0]->irq_level,
3876                                         synclinkmp_interrupt,
3877                                         port_array[0]->irq_flags,
3878                                         port_array[0]->device_name,
3879                                         port_array[0]) < 0 ) {
3880                         printk( "%s(%d):%s Can't request interrupt, IRQ=%d\n",
3881                                 __FILE__,__LINE__,
3882                                 port_array[0]->device_name,
3883                                 port_array[0]->irq_level );
3884                 }
3885                 else {
3886                         port_array[0]->irq_requested = true;
3887                         adapter_test(port_array[0]);
3888                 }
3889         }
3890 }
3891
3892 static const struct tty_operations ops = {
3893         .install = install,
3894         .open = open,
3895         .close = close,
3896         .write = write,
3897         .put_char = put_char,
3898         .flush_chars = flush_chars,
3899         .write_room = write_room,
3900         .chars_in_buffer = chars_in_buffer,
3901         .flush_buffer = flush_buffer,
3902         .ioctl = ioctl,
3903         .throttle = throttle,
3904         .unthrottle = unthrottle,
3905         .send_xchar = send_xchar,
3906         .break_ctl = set_break,
3907         .wait_until_sent = wait_until_sent,
3908         .set_termios = set_termios,
3909         .stop = tx_hold,
3910         .start = tx_release,
3911         .hangup = hangup,
3912         .tiocmget = tiocmget,
3913         .tiocmset = tiocmset,
3914         .get_icount = get_icount,
3915         .proc_fops = &synclinkmp_proc_fops,
3916 };
3917
3918
3919 static void synclinkmp_cleanup(void)
3920 {
3921         int rc;
3922         SLMP_INFO *info;
3923         SLMP_INFO *tmp;
3924
3925         printk("Unloading %s %s\n", driver_name, driver_version);
3926
3927         if (serial_driver) {
3928                 if ((rc = tty_unregister_driver(serial_driver)))
3929                         printk("%s(%d) failed to unregister tty driver err=%d\n",
3930                                __FILE__,__LINE__,rc);
3931                 put_tty_driver(serial_driver);
3932         }
3933
3934         /* reset devices */
3935         info = synclinkmp_device_list;
3936         while(info) {
3937                 reset_port(info);
3938                 info = info->next_device;
3939         }
3940
3941         /* release devices */
3942         info = synclinkmp_device_list;
3943         while(info) {
3944 #if SYNCLINK_GENERIC_HDLC
3945                 hdlcdev_exit(info);
3946 #endif
3947                 free_dma_bufs(info);
3948                 free_tmp_rx_buf(info);
3949                 if ( info->port_num == 0 ) {
3950                         if (info->sca_base)
3951                                 write_reg(info, LPR, 1); /* set low power mode */
3952                         release_resources(info);
3953                 }
3954                 tmp = info;
3955                 info = info->next_device;
3956                 tty_port_destroy(&tmp->port);
3957                 kfree(tmp);
3958         }
3959
3960         pci_unregister_driver(&synclinkmp_pci_driver);
3961 }
3962
3963 /* Driver initialization entry point.
3964  */
3965
3966 static int __init synclinkmp_init(void)
3967 {
3968         int rc;
3969
3970         if (break_on_load) {
3971                 synclinkmp_get_text_ptr();
3972                 BREAKPOINT();
3973         }
3974
3975         printk("%s %s\n", driver_name, driver_version);
3976
3977         if ((rc = pci_register_driver(&synclinkmp_pci_driver)) < 0) {
3978                 printk("%s:failed to register PCI driver, error=%d\n",__FILE__,rc);
3979                 return rc;
3980         }
3981
3982         serial_driver = alloc_tty_driver(128);
3983         if (!serial_driver) {
3984                 rc = -ENOMEM;
3985                 goto error;
3986         }
3987
3988         /* Initialize the tty_driver structure */
3989
3990         serial_driver->driver_name = "synclinkmp";
3991         serial_driver->name = "ttySLM";
3992         serial_driver->major = ttymajor;
3993         serial_driver->minor_start = 64;
3994         serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
3995         serial_driver->subtype = SERIAL_TYPE_NORMAL;
3996         serial_driver->init_termios = tty_std_termios;
3997         serial_driver->init_termios.c_cflag =
3998                 B9600 | CS8 | CREAD | HUPCL | CLOCAL;
3999         serial_driver->init_termios.c_ispeed = 9600;
4000         serial_driver->init_termios.c_ospeed = 9600;
4001         serial_driver->flags = TTY_DRIVER_REAL_RAW;
4002         tty_set_operations(serial_driver, &ops);
4003         if ((rc = tty_register_driver(serial_driver)) < 0) {
4004                 printk("%s(%d):Couldn't register serial driver\n",
4005                         __FILE__,__LINE__);
4006                 put_tty_driver(serial_driver);
4007                 serial_driver = NULL;
4008                 goto error;
4009         }
4010
4011         printk("%s %s, tty major#%d\n",
4012                 driver_name, driver_version,
4013                 serial_driver->major);
4014
4015         return 0;
4016
4017 error:
4018         synclinkmp_cleanup();
4019         return rc;
4020 }
4021
4022 static void __exit synclinkmp_exit(void)
4023 {
4024         synclinkmp_cleanup();
4025 }
4026
4027 module_init(synclinkmp_init);
4028 module_exit(synclinkmp_exit);
4029
4030 /* Set the port for internal loopback mode.
4031  * The TxCLK and RxCLK signals are generated from the BRG and
4032  * the TxD is looped back to the RxD internally.
4033  */
4034 static void enable_loopback(SLMP_INFO *info, int enable)
4035 {
4036         if (enable) {
4037                 /* MD2 (Mode Register 2)
4038                  * 01..00  CNCT<1..0> Channel Connection 11=Local Loopback
4039                  */
4040                 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) | (BIT1 + BIT0)));
4041
4042                 /* degate external TxC clock source */
4043                 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4044                 write_control_reg(info);
4045
4046                 /* RXS/TXS (Rx/Tx clock source)
4047                  * 07      Reserved, must be 0
4048                  * 06..04  Clock Source, 100=BRG
4049                  * 03..00  Clock Divisor, 0000=1
4050                  */
4051                 write_reg(info, RXS, 0x40);
4052                 write_reg(info, TXS, 0x40);
4053
4054         } else {
4055                 /* MD2 (Mode Register 2)
4056                  * 01..00  CNCT<1..0> Channel connection, 0=normal
4057                  */
4058                 write_reg(info, MD2, (unsigned char)(read_reg(info, MD2) & ~(BIT1 + BIT0)));
4059
4060                 /* RXS/TXS (Rx/Tx clock source)
4061                  * 07      Reserved, must be 0
4062                  * 06..04  Clock Source, 000=RxC/TxC Pin
4063                  * 03..00  Clock Divisor, 0000=1
4064                  */
4065                 write_reg(info, RXS, 0x00);
4066                 write_reg(info, TXS, 0x00);
4067         }
4068
4069         /* set LinkSpeed if available, otherwise default to 2Mbps */
4070         if (info->params.clock_speed)
4071                 set_rate(info, info->params.clock_speed);
4072         else
4073                 set_rate(info, 3686400);
4074 }
4075
4076 /* Set the baud rate register to the desired speed
4077  *
4078  *      data_rate       data rate of clock in bits per second
4079  *                      A data rate of 0 disables the AUX clock.
4080  */
4081 static void set_rate( SLMP_INFO *info, u32 data_rate )
4082 {
4083         u32 TMCValue;
4084         unsigned char BRValue;
4085         u32 Divisor=0;
4086
4087         /* fBRG = fCLK/(TMC * 2^BR)
4088          */
4089         if (data_rate != 0) {
4090                 Divisor = 14745600/data_rate;
4091                 if (!Divisor)
4092                         Divisor = 1;
4093
4094                 TMCValue = Divisor;
4095
4096                 BRValue = 0;
4097                 if (TMCValue != 1 && TMCValue != 2) {
4098                         /* BRValue of 0 provides 50/50 duty cycle *only* when
4099                          * TMCValue is 1 or 2. BRValue of 1 to 9 always provides
4100                          * 50/50 duty cycle.
4101                          */
4102                         BRValue = 1;
4103                         TMCValue >>= 1;
4104                 }
4105
4106                 /* while TMCValue is too big for TMC register, divide
4107                  * by 2 and increment BR exponent.
4108                  */
4109                 for(; TMCValue > 256 && BRValue < 10; BRValue++)
4110                         TMCValue >>= 1;
4111
4112                 write_reg(info, TXS,
4113                         (unsigned char)((read_reg(info, TXS) & 0xf0) | BRValue));
4114                 write_reg(info, RXS,
4115                         (unsigned char)((read_reg(info, RXS) & 0xf0) | BRValue));
4116                 write_reg(info, TMC, (unsigned char)TMCValue);
4117         }
4118         else {
4119                 write_reg(info, TXS,0);
4120                 write_reg(info, RXS,0);
4121                 write_reg(info, TMC, 0);
4122         }
4123 }
4124
4125 /* Disable receiver
4126  */
4127 static void rx_stop(SLMP_INFO *info)
4128 {
4129         if (debug_level >= DEBUG_LEVEL_ISR)
4130                 printk("%s(%d):%s rx_stop()\n",
4131                          __FILE__,__LINE__, info->device_name );
4132
4133         write_reg(info, CMD, RXRESET);
4134
4135         info->ie0_value &= ~RXRDYE;
4136         write_reg(info, IE0, info->ie0_value);  /* disable Rx data interrupts */
4137
4138         write_reg(info, RXDMA + DSR, 0);        /* disable Rx DMA */
4139         write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4140         write_reg(info, RXDMA + DIR, 0);        /* disable Rx DMA interrupts */
4141
4142         info->rx_enabled = false;
4143         info->rx_overflow = false;
4144 }
4145
4146 /* enable the receiver
4147  */
4148 static void rx_start(SLMP_INFO *info)
4149 {
4150         int i;
4151
4152         if (debug_level >= DEBUG_LEVEL_ISR)
4153                 printk("%s(%d):%s rx_start()\n",
4154                          __FILE__,__LINE__, info->device_name );
4155
4156         write_reg(info, CMD, RXRESET);
4157
4158         if ( info->params.mode == MGSL_MODE_HDLC ) {
4159                 /* HDLC, disabe IRQ on rxdata */
4160                 info->ie0_value &= ~RXRDYE;
4161                 write_reg(info, IE0, info->ie0_value);
4162
4163                 /* Reset all Rx DMA buffers and program rx dma */
4164                 write_reg(info, RXDMA + DSR, 0);                /* disable Rx DMA */
4165                 write_reg(info, RXDMA + DCMD, SWABORT); /* reset/init Rx DMA */
4166
4167                 for (i = 0; i < info->rx_buf_count; i++) {
4168                         info->rx_buf_list[i].status = 0xff;
4169
4170                         // throttle to 4 shared memory writes at a time to prevent
4171                         // hogging local bus (keep latency time for DMA requests low).
4172                         if (!(i % 4))
4173                                 read_status_reg(info);
4174                 }
4175                 info->current_rx_buf = 0;
4176
4177                 /* set current/1st descriptor address */
4178                 write_reg16(info, RXDMA + CDA,
4179                         info->rx_buf_list_ex[0].phys_entry);
4180
4181                 /* set new last rx descriptor address */
4182                 write_reg16(info, RXDMA + EDA,
4183                         info->rx_buf_list_ex[info->rx_buf_count - 1].phys_entry);
4184
4185                 /* set buffer length (shared by all rx dma data buffers) */
4186                 write_reg16(info, RXDMA + BFL, SCABUFSIZE);
4187
4188                 write_reg(info, RXDMA + DIR, 0x60);     /* enable Rx DMA interrupts (EOM/BOF) */
4189                 write_reg(info, RXDMA + DSR, 0xf2);     /* clear Rx DMA IRQs, enable Rx DMA */
4190         } else {
4191                 /* async, enable IRQ on rxdata */
4192                 info->ie0_value |= RXRDYE;
4193                 write_reg(info, IE0, info->ie0_value);
4194         }
4195
4196         write_reg(info, CMD, RXENABLE);
4197
4198         info->rx_overflow = false;
4199         info->rx_enabled = true;
4200 }
4201
4202 /* Enable the transmitter and send a transmit frame if
4203  * one is loaded in the DMA buffers.
4204  */
4205 static void tx_start(SLMP_INFO *info)
4206 {
4207         if (debug_level >= DEBUG_LEVEL_ISR)
4208                 printk("%s(%d):%s tx_start() tx_count=%d\n",
4209                          __FILE__,__LINE__, info->device_name,info->tx_count );
4210
4211         if (!info->tx_enabled ) {
4212                 write_reg(info, CMD, TXRESET);
4213                 write_reg(info, CMD, TXENABLE);
4214                 info->tx_enabled = true;
4215         }
4216
4217         if ( info->tx_count ) {
4218
4219                 /* If auto RTS enabled and RTS is inactive, then assert */
4220                 /* RTS and set a flag indicating that the driver should */
4221                 /* negate RTS when the transmission completes. */
4222
4223                 info->drop_rts_on_tx_done = false;
4224
4225                 if (info->params.mode != MGSL_MODE_ASYNC) {
4226
4227                         if ( info->params.flags & HDLC_FLAG_AUTO_RTS ) {
4228                                 get_signals( info );
4229                                 if ( !(info->serial_signals & SerialSignal_RTS) ) {
4230                                         info->serial_signals |= SerialSignal_RTS;
4231                                         set_signals( info );
4232                                         info->drop_rts_on_tx_done = true;
4233                                 }
4234                         }
4235
4236                         write_reg16(info, TRC0,
4237                                 (unsigned short)(((tx_negate_fifo_level-1)<<8) + tx_active_fifo_level));
4238
4239                         write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
4240                         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4241
4242                         /* set TX CDA (current descriptor address) */
4243                         write_reg16(info, TXDMA + CDA,
4244                                 info->tx_buf_list_ex[0].phys_entry);
4245
4246                         /* set TX EDA (last descriptor address) */
4247                         write_reg16(info, TXDMA + EDA,
4248                                 info->tx_buf_list_ex[info->last_tx_buf].phys_entry);
4249
4250                         /* enable underrun IRQ */
4251                         info->ie1_value &= ~IDLE;
4252                         info->ie1_value |= UDRN;
4253                         write_reg(info, IE1, info->ie1_value);
4254                         write_reg(info, SR1, (unsigned char)(IDLE + UDRN));
4255
4256                         write_reg(info, TXDMA + DIR, 0x40);             /* enable Tx DMA interrupts (EOM) */
4257                         write_reg(info, TXDMA + DSR, 0xf2);             /* clear Tx DMA IRQs, enable Tx DMA */
4258
4259                         mod_timer(&info->tx_timer, jiffies +
4260                                         msecs_to_jiffies(5000));
4261                 }
4262                 else {
4263                         tx_load_fifo(info);
4264                         /* async, enable IRQ on txdata */
4265                         info->ie0_value |= TXRDYE;
4266                         write_reg(info, IE0, info->ie0_value);
4267                 }
4268
4269                 info->tx_active = true;
4270         }
4271 }
4272
4273 /* stop the transmitter and DMA
4274  */
4275 static void tx_stop( SLMP_INFO *info )
4276 {
4277         if (debug_level >= DEBUG_LEVEL_ISR)
4278                 printk("%s(%d):%s tx_stop()\n",
4279                          __FILE__,__LINE__, info->device_name );
4280
4281         del_timer(&info->tx_timer);
4282
4283         write_reg(info, TXDMA + DSR, 0);                /* disable DMA channel */
4284         write_reg(info, TXDMA + DCMD, SWABORT); /* reset/init DMA channel */
4285
4286         write_reg(info, CMD, TXRESET);
4287
4288         info->ie1_value &= ~(UDRN + IDLE);
4289         write_reg(info, IE1, info->ie1_value);  /* disable tx status interrupts */
4290         write_reg(info, SR1, (unsigned char)(IDLE + UDRN));     /* clear pending */
4291
4292         info->ie0_value &= ~TXRDYE;
4293         write_reg(info, IE0, info->ie0_value);  /* disable tx data interrupts */
4294
4295         info->tx_enabled = false;
4296         info->tx_active = false;
4297 }
4298
4299 /* Fill the transmit FIFO until the FIFO is full or
4300  * there is no more data to load.
4301  */
4302 static void tx_load_fifo(SLMP_INFO *info)
4303 {
4304         u8 TwoBytes[2];
4305
4306         /* do nothing is now tx data available and no XON/XOFF pending */
4307
4308         if ( !info->tx_count && !info->x_char )
4309                 return;
4310
4311         /* load the Transmit FIFO until FIFOs full or all data sent */
4312
4313         while( info->tx_count && (read_reg(info,SR0) & BIT1) ) {
4314
4315                 /* there is more space in the transmit FIFO and */
4316                 /* there is more data in transmit buffer */
4317
4318                 if ( (info->tx_count > 1) && !info->x_char ) {
4319                         /* write 16-bits */
4320                         TwoBytes[0] = info->tx_buf[info->tx_get++];
4321                         if (info->tx_get >= info->max_frame_size)
4322                                 info->tx_get -= info->max_frame_size;
4323                         TwoBytes[1] = info->tx_buf[info->tx_get++];
4324                         if (info->tx_get >= info->max_frame_size)
4325                                 info->tx_get -= info->max_frame_size;
4326
4327                         write_reg16(info, TRB, *((u16 *)TwoBytes));
4328
4329                         info->tx_count -= 2;
4330                         info->icount.tx += 2;
4331                 } else {
4332                         /* only 1 byte left to transmit or 1 FIFO slot left */
4333
4334                         if (info->x_char) {
4335                                 /* transmit pending high priority char */
4336                                 write_reg(info, TRB, info->x_char);
4337                                 info->x_char = 0;
4338                         } else {
4339                                 write_reg(info, TRB, info->tx_buf[info->tx_get++]);
4340                                 if (info->tx_get >= info->max_frame_size)
4341                                         info->tx_get -= info->max_frame_size;
4342                                 info->tx_count--;
4343                         }
4344                         info->icount.tx++;
4345                 }
4346         }
4347 }
4348
4349 /* Reset a port to a known state
4350  */
4351 static void reset_port(SLMP_INFO *info)
4352 {
4353         if (info->sca_base) {
4354
4355                 tx_stop(info);
4356                 rx_stop(info);
4357
4358                 info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
4359                 set_signals(info);
4360
4361                 /* disable all port interrupts */
4362                 info->ie0_value = 0;
4363                 info->ie1_value = 0;
4364                 info->ie2_value = 0;
4365                 write_reg(info, IE0, info->ie0_value);
4366                 write_reg(info, IE1, info->ie1_value);
4367                 write_reg(info, IE2, info->ie2_value);
4368
4369                 write_reg(info, CMD, CHRESET);
4370         }
4371 }
4372
4373 /* Reset all the ports to a known state.
4374  */
4375 static void reset_adapter(SLMP_INFO *info)
4376 {
4377         int i;
4378
4379         for ( i=0; i < SCA_MAX_PORTS; ++i) {
4380                 if (info->port_array[i])
4381                         reset_port(info->port_array[i]);
4382         }
4383 }
4384
4385 /* Program port for asynchronous communications.
4386  */
4387 static void async_mode(SLMP_INFO *info)
4388 {
4389
4390         unsigned char RegValue;
4391
4392         tx_stop(info);
4393         rx_stop(info);
4394
4395         /* MD0, Mode Register 0
4396          *
4397          * 07..05  PRCTL<2..0>, Protocol Mode, 000=async
4398          * 04      AUTO, Auto-enable (RTS/CTS/DCD)
4399          * 03      Reserved, must be 0
4400          * 02      CRCCC, CRC Calculation, 0=disabled
4401          * 01..00  STOP<1..0> Stop bits (00=1,10=2)
4402          *
4403          * 0000 0000
4404          */
4405         RegValue = 0x00;
4406         if (info->params.stop_bits != 1)
4407                 RegValue |= BIT1;
4408         write_reg(info, MD0, RegValue);
4409
4410         /* MD1, Mode Register 1
4411          *
4412          * 07..06  BRATE<1..0>, bit rate, 00=1/1 01=1/16 10=1/32 11=1/64
4413          * 05..04  TXCHR<1..0>, tx char size, 00=8 bits,01=7,10=6,11=5
4414          * 03..02  RXCHR<1..0>, rx char size
4415          * 01..00  PMPM<1..0>, Parity mode, 00=none 10=even 11=odd
4416          *
4417          * 0100 0000
4418          */
4419         RegValue = 0x40;
4420         switch (info->params.data_bits) {
4421         case 7: RegValue |= BIT4 + BIT2; break;
4422         case 6: RegValue |= BIT5 + BIT3; break;
4423         case 5: RegValue |= BIT5 + BIT4 + BIT3 + BIT2; break;
4424         }
4425         if (info->params.parity != ASYNC_PARITY_NONE) {
4426                 RegValue |= BIT1;
4427                 if (info->params.parity == ASYNC_PARITY_ODD)
4428                         RegValue |= BIT0;
4429         }
4430         write_reg(info, MD1, RegValue);
4431
4432         /* MD2, Mode Register 2
4433          *
4434          * 07..02  Reserved, must be 0
4435          * 01..00  CNCT<1..0> Channel connection, 00=normal 11=local loopback
4436          *
4437          * 0000 0000
4438          */
4439         RegValue = 0x00;
4440         if (info->params.loopback)
4441                 RegValue |= (BIT1 + BIT0);
4442         write_reg(info, MD2, RegValue);
4443
4444         /* RXS, Receive clock source
4445          *
4446          * 07      Reserved, must be 0
4447          * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4448          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4449          */
4450         RegValue=BIT6;
4451         write_reg(info, RXS, RegValue);
4452
4453         /* TXS, Transmit clock source
4454          *
4455          * 07      Reserved, must be 0
4456          * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4457          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4458          */
4459         RegValue=BIT6;
4460         write_reg(info, TXS, RegValue);
4461
4462         /* Control Register
4463          *
4464          * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4465          */
4466         info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4467         write_control_reg(info);
4468
4469         tx_set_idle(info);
4470
4471         /* RRC Receive Ready Control 0
4472          *
4473          * 07..05  Reserved, must be 0
4474          * 04..00  RRC<4..0> Rx FIFO trigger active 0x00 = 1 byte
4475          */
4476         write_reg(info, RRC, 0x00);
4477
4478         /* TRC0 Transmit Ready Control 0
4479          *
4480          * 07..05  Reserved, must be 0
4481          * 04..00  TRC<4..0> Tx FIFO trigger active 0x10 = 16 bytes
4482          */
4483         write_reg(info, TRC0, 0x10);
4484
4485         /* TRC1 Transmit Ready Control 1
4486          *
4487          * 07..05  Reserved, must be 0
4488          * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1e = 31 bytes (full-1)
4489          */
4490         write_reg(info, TRC1, 0x1e);
4491
4492         /* CTL, MSCI control register
4493          *
4494          * 07..06  Reserved, set to 0
4495          * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4496          * 04      IDLC, idle control, 0=mark 1=idle register
4497          * 03      BRK, break, 0=off 1 =on (async)
4498          * 02      SYNCLD, sync char load enable (BSC) 1=enabled
4499          * 01      GOP, go active on poll (LOOP mode) 1=enabled
4500          * 00      RTS, RTS output control, 0=active 1=inactive
4501          *
4502          * 0001 0001
4503          */
4504         RegValue = 0x10;
4505         if (!(info->serial_signals & SerialSignal_RTS))
4506                 RegValue |= 0x01;
4507         write_reg(info, CTL, RegValue);
4508
4509         /* enable status interrupts */
4510         info->ie0_value |= TXINTE + RXINTE;
4511         write_reg(info, IE0, info->ie0_value);
4512
4513         /* enable break detect interrupt */
4514         info->ie1_value = BRKD;
4515         write_reg(info, IE1, info->ie1_value);
4516
4517         /* enable rx overrun interrupt */
4518         info->ie2_value = OVRN;
4519         write_reg(info, IE2, info->ie2_value);
4520
4521         set_rate( info, info->params.data_rate * 16 );
4522 }
4523
4524 /* Program the SCA for HDLC communications.
4525  */
4526 static void hdlc_mode(SLMP_INFO *info)
4527 {
4528         unsigned char RegValue;
4529         u32 DpllDivisor;
4530
4531         // Can't use DPLL because SCA outputs recovered clock on RxC when
4532         // DPLL mode selected. This causes output contention with RxC receiver.
4533         // Use of DPLL would require external hardware to disable RxC receiver
4534         // when DPLL mode selected.
4535         info->params.flags &= ~(HDLC_FLAG_TXC_DPLL + HDLC_FLAG_RXC_DPLL);
4536
4537         /* disable DMA interrupts */
4538         write_reg(info, TXDMA + DIR, 0);
4539         write_reg(info, RXDMA + DIR, 0);
4540
4541         /* MD0, Mode Register 0
4542          *
4543          * 07..05  PRCTL<2..0>, Protocol Mode, 100=HDLC
4544          * 04      AUTO, Auto-enable (RTS/CTS/DCD)
4545          * 03      Reserved, must be 0
4546          * 02      CRCCC, CRC Calculation, 1=enabled
4547          * 01      CRC1, CRC selection, 0=CRC-16,1=CRC-CCITT-16
4548          * 00      CRC0, CRC initial value, 1 = all 1s
4549          *
4550          * 1000 0001
4551          */
4552         RegValue = 0x81;
4553         if (info->params.flags & HDLC_FLAG_AUTO_CTS)
4554                 RegValue |= BIT4;
4555         if (info->params.flags & HDLC_FLAG_AUTO_DCD)
4556                 RegValue |= BIT4;
4557         if (info->params.crc_type == HDLC_CRC_16_CCITT)
4558                 RegValue |= BIT2 + BIT1;
4559         write_reg(info, MD0, RegValue);
4560
4561         /* MD1, Mode Register 1
4562          *
4563          * 07..06  ADDRS<1..0>, Address detect, 00=no addr check
4564          * 05..04  TXCHR<1..0>, tx char size, 00=8 bits
4565          * 03..02  RXCHR<1..0>, rx char size, 00=8 bits
4566          * 01..00  PMPM<1..0>, Parity mode, 00=no parity
4567          *
4568          * 0000 0000
4569          */
4570         RegValue = 0x00;
4571         write_reg(info, MD1, RegValue);
4572
4573         /* MD2, Mode Register 2
4574          *
4575          * 07      NRZFM, 0=NRZ, 1=FM
4576          * 06..05  CODE<1..0> Encoding, 00=NRZ
4577          * 04..03  DRATE<1..0> DPLL Divisor, 00=8
4578          * 02      Reserved, must be 0
4579          * 01..00  CNCT<1..0> Channel connection, 0=normal
4580          *
4581          * 0000 0000
4582          */
4583         RegValue = 0x00;
4584         switch(info->params.encoding) {
4585         case HDLC_ENCODING_NRZI:          RegValue |= BIT5; break;
4586         case HDLC_ENCODING_BIPHASE_MARK:  RegValue |= BIT7 + BIT5; break; /* aka FM1 */
4587         case HDLC_ENCODING_BIPHASE_SPACE: RegValue |= BIT7 + BIT6; break; /* aka FM0 */
4588         case HDLC_ENCODING_BIPHASE_LEVEL: RegValue |= BIT7; break;      /* aka Manchester */
4589 #if 0
4590         case HDLC_ENCODING_NRZB:                                        /* not supported */
4591         case HDLC_ENCODING_NRZI_MARK:                                   /* not supported */
4592         case HDLC_ENCODING_DIFF_BIPHASE_LEVEL:                          /* not supported */
4593 #endif
4594         }
4595         if ( info->params.flags & HDLC_FLAG_DPLL_DIV16 ) {
4596                 DpllDivisor = 16;
4597                 RegValue |= BIT3;
4598         } else if ( info->params.flags & HDLC_FLAG_DPLL_DIV8 ) {
4599                 DpllDivisor = 8;
4600         } else {
4601                 DpllDivisor = 32;
4602                 RegValue |= BIT4;
4603         }
4604         write_reg(info, MD2, RegValue);
4605
4606
4607         /* RXS, Receive clock source
4608          *
4609          * 07      Reserved, must be 0
4610          * 06..04  RXCS<2..0>, clock source, 000=RxC Pin, 100=BRG, 110=DPLL
4611          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4612          */
4613         RegValue=0;
4614         if (info->params.flags & HDLC_FLAG_RXC_BRG)
4615                 RegValue |= BIT6;
4616         if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4617                 RegValue |= BIT6 + BIT5;
4618         write_reg(info, RXS, RegValue);
4619
4620         /* TXS, Transmit clock source
4621          *
4622          * 07      Reserved, must be 0
4623          * 06..04  RXCS<2..0>, clock source, 000=TxC Pin, 100=BRG, 110=Receive Clock
4624          * 03..00  RXBR<3..0>, rate divisor, 0000=1
4625          */
4626         RegValue=0;
4627         if (info->params.flags & HDLC_FLAG_TXC_BRG)
4628                 RegValue |= BIT6;
4629         if (info->params.flags & HDLC_FLAG_TXC_DPLL)
4630                 RegValue |= BIT6 + BIT5;
4631         write_reg(info, TXS, RegValue);
4632
4633         if (info->params.flags & HDLC_FLAG_RXC_DPLL)
4634                 set_rate(info, info->params.clock_speed * DpllDivisor);
4635         else
4636                 set_rate(info, info->params.clock_speed);
4637
4638         /* GPDATA (General Purpose I/O Data Register)
4639          *
4640          * 6,4,2,0  CLKSEL<3..0>, 0 = TcCLK in, 1 = Auxclk out
4641          */
4642         if (info->params.flags & HDLC_FLAG_TXC_BRG)
4643                 info->port_array[0]->ctrlreg_value |= (BIT0 << (info->port_num * 2));
4644         else
4645                 info->port_array[0]->ctrlreg_value &= ~(BIT0 << (info->port_num * 2));
4646         write_control_reg(info);
4647
4648         /* RRC Receive Ready Control 0
4649          *
4650          * 07..05  Reserved, must be 0
4651          * 04..00  RRC<4..0> Rx FIFO trigger active
4652          */
4653         write_reg(info, RRC, rx_active_fifo_level);
4654
4655         /* TRC0 Transmit Ready Control 0
4656          *
4657          * 07..05  Reserved, must be 0
4658          * 04..00  TRC<4..0> Tx FIFO trigger active
4659          */
4660         write_reg(info, TRC0, tx_active_fifo_level);
4661
4662         /* TRC1 Transmit Ready Control 1
4663          *
4664          * 07..05  Reserved, must be 0
4665          * 04..00  TRC<4..0> Tx FIFO trigger inactive 0x1f = 32 bytes (full)
4666          */
4667         write_reg(info, TRC1, (unsigned char)(tx_negate_fifo_level - 1));
4668
4669         /* DMR, DMA Mode Register
4670          *
4671          * 07..05  Reserved, must be 0
4672          * 04      TMOD, Transfer Mode: 1=chained-block
4673          * 03      Reserved, must be 0
4674          * 02      NF, Number of Frames: 1=multi-frame
4675          * 01      CNTE, Frame End IRQ Counter enable: 0=disabled
4676          * 00      Reserved, must be 0
4677          *
4678          * 0001 0100
4679          */
4680         write_reg(info, TXDMA + DMR, 0x14);
4681         write_reg(info, RXDMA + DMR, 0x14);
4682
4683         /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4684         write_reg(info, RXDMA + CPB,
4685                 (unsigned char)(info->buffer_list_phys >> 16));
4686
4687         /* Set chain pointer base (upper 8 bits of 24 bit addr) */
4688         write_reg(info, TXDMA + CPB,
4689                 (unsigned char)(info->buffer_list_phys >> 16));
4690
4691         /* enable status interrupts. other code enables/disables
4692          * the individual sources for these two interrupt classes.
4693          */
4694         info->ie0_value |= TXINTE + RXINTE;
4695         write_reg(info, IE0, info->ie0_value);
4696
4697         /* CTL, MSCI control register
4698          *
4699          * 07..06  Reserved, set to 0
4700          * 05      UDRNC, underrun control, 0=abort 1=CRC+flag (HDLC/BSC)
4701          * 04      IDLC, idle control, 0=mark 1=idle register
4702          * 03      BRK, break, 0=off 1 =on (async)
4703          * 02      SYNCLD, sync char load enable (BSC) 1=enabled
4704          * 01      GOP, go active on poll (LOOP mode) 1=enabled
4705          * 00      RTS, RTS output control, 0=active 1=inactive
4706          *
4707          * 0001 0001
4708          */
4709         RegValue = 0x10;
4710         if (!(info->serial_signals & SerialSignal_RTS))
4711                 RegValue |= 0x01;
4712         write_reg(info, CTL, RegValue);
4713
4714         /* preamble not supported ! */
4715
4716         tx_set_idle(info);
4717         tx_stop(info);
4718         rx_stop(info);
4719
4720         set_rate(info, info->params.clock_speed);
4721
4722         if (info->params.loopback)
4723                 enable_loopback(info,1);
4724 }
4725
4726 /* Set the transmit HDLC idle mode
4727  */
4728 static void tx_set_idle(SLMP_INFO *info)
4729 {
4730         unsigned char RegValue = 0xff;
4731
4732         /* Map API idle mode to SCA register bits */
4733         switch(info->idle_mode) {
4734         case HDLC_TXIDLE_FLAGS:                 RegValue = 0x7e; break;
4735         case HDLC_TXIDLE_ALT_ZEROS_ONES:        RegValue = 0xaa; break;
4736         case HDLC_TXIDLE_ZEROS:                 RegValue = 0x00; break;
4737         case HDLC_TXIDLE_ONES:                  RegValue = 0xff; break;
4738         case HDLC_TXIDLE_ALT_MARK_SPACE:        RegValue = 0xaa; break;
4739         case HDLC_TXIDLE_SPACE:                 RegValue = 0x00; break;
4740         case HDLC_TXIDLE_MARK:                  RegValue = 0xff; break;
4741         }
4742
4743         write_reg(info, IDL, RegValue);
4744 }
4745
4746 /* Query the adapter for the state of the V24 status (input) signals.
4747  */
4748 static void get_signals(SLMP_INFO *info)
4749 {
4750         u16 status = read_reg(info, SR3);
4751         u16 gpstatus = read_status_reg(info);
4752         u16 testbit;
4753
4754         /* clear all serial signals except RTS and DTR */
4755         info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
4756
4757         /* set serial signal bits to reflect MISR */
4758
4759         if (!(status & BIT3))
4760                 info->serial_signals |= SerialSignal_CTS;
4761
4762         if ( !(status & BIT2))
4763                 info->serial_signals |= SerialSignal_DCD;
4764
4765         testbit = BIT1 << (info->port_num * 2); // Port 0..3 RI is GPDATA<1,3,5,7>
4766         if (!(gpstatus & testbit))
4767                 info->serial_signals |= SerialSignal_RI;
4768
4769         testbit = BIT0 << (info->port_num * 2); // Port 0..3 DSR is GPDATA<0,2,4,6>
4770         if (!(gpstatus & testbit))
4771                 info->serial_signals |= SerialSignal_DSR;
4772 }
4773
4774 /* Set the state of RTS and DTR based on contents of
4775  * serial_signals member of device context.
4776  */
4777 static void set_signals(SLMP_INFO *info)
4778 {
4779         unsigned char RegValue;
4780         u16 EnableBit;
4781
4782         RegValue = read_reg(info, CTL);
4783         if (info->serial_signals & SerialSignal_RTS)
4784                 RegValue &= ~BIT0;
4785         else
4786                 RegValue |= BIT0;
4787         write_reg(info, CTL, RegValue);
4788
4789         // Port 0..3 DTR is ctrl reg <1,3,5,7>
4790         EnableBit = BIT1 << (info->port_num*2);
4791         if (info->serial_signals & SerialSignal_DTR)
4792                 info->port_array[0]->ctrlreg_value &= ~EnableBit;
4793         else
4794                 info->port_array[0]->ctrlreg_value |= EnableBit;
4795         write_control_reg(info);
4796 }
4797
4798 /*******************/
4799 /* DMA Buffer Code */
4800 /*******************/
4801
4802 /* Set the count for all receive buffers to SCABUFSIZE
4803  * and set the current buffer to the first buffer. This effectively
4804  * makes all buffers free and discards any data in buffers.
4805  */
4806 static void rx_reset_buffers(SLMP_INFO *info)
4807 {
4808         rx_free_frame_buffers(info, 0, info->rx_buf_count - 1);
4809 }
4810
4811 /* Free the buffers used by a received frame
4812  *
4813  * info   pointer to device instance data
4814  * first  index of 1st receive buffer of frame
4815  * last   index of last receive buffer of frame
4816  */
4817 static void rx_free_frame_buffers(SLMP_INFO *info, unsigned int first, unsigned int last)
4818 {
4819         bool done = false;
4820
4821         while(!done) {
4822                 /* reset current buffer for reuse */
4823                 info->rx_buf_list[first].status = 0xff;
4824
4825                 if (first == last) {
4826                         done = true;
4827                         /* set new last rx descriptor address */
4828                         write_reg16(info, RXDMA + EDA, info->rx_buf_list_ex[first].phys_entry);
4829                 }
4830
4831                 first++;
4832                 if (first == info->rx_buf_count)
4833                         first = 0;
4834         }
4835
4836         /* set current buffer to next buffer after last buffer of frame */
4837         info->current_rx_buf = first;
4838 }
4839
4840 /* Return a received frame from the receive DMA buffers.
4841  * Only frames received without errors are returned.
4842  *
4843  * Return Value:        true if frame returned, otherwise false
4844  */
4845 static bool rx_get_frame(SLMP_INFO *info)
4846 {
4847         unsigned int StartIndex, EndIndex;      /* index of 1st and last buffers of Rx frame */
4848         unsigned short status;
4849         unsigned int framesize = 0;
4850         bool ReturnCode = false;
4851         unsigned long flags;
4852         struct tty_struct *tty = info->port.tty;
4853         unsigned char addr_field = 0xff;
4854         SCADESC *desc;
4855         SCADESC_EX *desc_ex;
4856
4857 CheckAgain:
4858         /* assume no frame returned, set zero length */
4859         framesize = 0;
4860         addr_field = 0xff;
4861
4862         /*
4863          * current_rx_buf points to the 1st buffer of the next available
4864          * receive frame. To find the last buffer of the frame look for
4865          * a non-zero status field in the buffer entries. (The status
4866          * field is set by the 16C32 after completing a receive frame.
4867          */
4868         StartIndex = EndIndex = info->current_rx_buf;
4869
4870         for ( ;; ) {
4871                 desc = &info->rx_buf_list[EndIndex];
4872                 desc_ex = &info->rx_buf_list_ex[EndIndex];
4873
4874                 if (desc->status == 0xff)
4875                         goto Cleanup;   /* current desc still in use, no frames available */
4876
4877                 if (framesize == 0 && info->params.addr_filter != 0xff)
4878                         addr_field = desc_ex->virt_addr[0];
4879
4880                 framesize += desc->length;
4881
4882                 /* Status != 0 means last buffer of frame */
4883                 if (desc->status)
4884                         break;
4885
4886                 EndIndex++;
4887                 if (EndIndex == info->rx_buf_count)
4888                         EndIndex = 0;
4889
4890                 if (EndIndex == info->current_rx_buf) {
4891                         /* all buffers have been 'used' but none mark      */
4892                         /* the end of a frame. Reset buffers and receiver. */
4893                         if ( info->rx_enabled ){
4894                                 spin_lock_irqsave(&info->lock,flags);
4895                                 rx_start(info);
4896                                 spin_unlock_irqrestore(&info->lock,flags);
4897                         }
4898                         goto Cleanup;
4899                 }
4900
4901         }
4902
4903         /* check status of receive frame */
4904
4905         /* frame status is byte stored after frame data
4906          *
4907          * 7 EOM (end of msg), 1 = last buffer of frame
4908          * 6 Short Frame, 1 = short frame
4909          * 5 Abort, 1 = frame aborted
4910          * 4 Residue, 1 = last byte is partial
4911          * 3 Overrun, 1 = overrun occurred during frame reception
4912          * 2 CRC,     1 = CRC error detected
4913          *
4914          */
4915         status = desc->status;
4916
4917         /* ignore CRC bit if not using CRC (bit is undefined) */
4918         /* Note:CRC is not save to data buffer */
4919         if (info->params.crc_type == HDLC_CRC_NONE)
4920                 status &= ~BIT2;
4921
4922         if (framesize == 0 ||
4923                  (addr_field != 0xff && addr_field != info->params.addr_filter)) {
4924                 /* discard 0 byte frames, this seems to occur sometime
4925                  * when remote is idling flags.
4926                  */
4927                 rx_free_frame_buffers(info, StartIndex, EndIndex);
4928                 goto CheckAgain;
4929         }
4930
4931         if (framesize < 2)
4932                 status |= BIT6;
4933
4934         if (status & (BIT6+BIT5+BIT3+BIT2)) {
4935                 /* received frame has errors,
4936                  * update counts and mark frame size as 0
4937                  */
4938                 if (status & BIT6)
4939                         info->icount.rxshort++;
4940                 else if (status & BIT5)
4941                         info->icount.rxabort++;
4942                 else if (status & BIT3)
4943                         info->icount.rxover++;
4944                 else
4945                         info->icount.rxcrc++;
4946
4947                 framesize = 0;
4948 #if SYNCLINK_GENERIC_HDLC
4949                 {
4950                         info->netdev->stats.rx_errors++;
4951                         info->netdev->stats.rx_frame_errors++;
4952                 }
4953 #endif
4954         }
4955
4956         if ( debug_level >= DEBUG_LEVEL_BH )
4957                 printk("%s(%d):%s rx_get_frame() status=%04X size=%d\n",
4958                         __FILE__,__LINE__,info->device_name,status,framesize);
4959
4960         if ( debug_level >= DEBUG_LEVEL_DATA )
4961                 trace_block(info,info->rx_buf_list_ex[StartIndex].virt_addr,
4962                         min_t(unsigned int, framesize, SCABUFSIZE), 0);
4963
4964         if (framesize) {
4965                 if (framesize > info->max_frame_size)
4966                         info->icount.rxlong++;
4967                 else {
4968                         /* copy dma buffer(s) to contiguous intermediate buffer */
4969                         int copy_count = framesize;
4970                         int index = StartIndex;
4971                         unsigned char *ptmp = info->tmp_rx_buf;
4972                         info->tmp_rx_buf_count = framesize;
4973
4974                         info->icount.rxok++;
4975
4976                         while(copy_count) {
4977                                 int partial_count = min(copy_count,SCABUFSIZE);
4978                                 memcpy( ptmp,
4979                                         info->rx_buf_list_ex[index].virt_addr,
4980                                         partial_count );
4981                                 ptmp += partial_count;
4982                                 copy_count -= partial_count;
4983
4984                                 if ( ++index == info->rx_buf_count )
4985                                         index = 0;
4986                         }
4987
4988 #if SYNCLINK_GENERIC_HDLC
4989                         if (info->netcount)
4990                                 hdlcdev_rx(info,info->tmp_rx_buf,framesize);
4991                         else
4992 #endif
4993                                 ldisc_receive_buf(tty,info->tmp_rx_buf,
4994                                                   info->flag_buf, framesize);
4995                 }
4996         }
4997         /* Free the buffers used by this frame. */
4998         rx_free_frame_buffers( info, StartIndex, EndIndex );
4999
5000         ReturnCode = true;
5001
5002 Cleanup:
5003         if ( info->rx_enabled && info->rx_overflow ) {
5004                 /* Receiver is enabled, but needs to restarted due to
5005                  * rx buffer overflow. If buffers are empty, restart receiver.
5006                  */
5007                 if (info->rx_buf_list[EndIndex].status == 0xff) {
5008                         spin_lock_irqsave(&info->lock,flags);
5009                         rx_start(info);
5010                         spin_unlock_irqrestore(&info->lock,flags);
5011                 }
5012         }
5013
5014         return ReturnCode;
5015 }
5016
5017 /* load the transmit DMA buffer with data
5018  */
5019 static void tx_load_dma_buffer(SLMP_INFO *info, const char *buf, unsigned int count)
5020 {
5021         unsigned short copy_count;
5022         unsigned int i = 0;
5023         SCADESC *desc;
5024         SCADESC_EX *desc_ex;
5025
5026         if ( debug_level >= DEBUG_LEVEL_DATA )
5027                 trace_block(info, buf, min_t(unsigned int, count, SCABUFSIZE), 1);
5028
5029         /* Copy source buffer to one or more DMA buffers, starting with
5030          * the first transmit dma buffer.
5031          */
5032         for(i=0;;)
5033         {
5034                 copy_count = min_t(unsigned int, count, SCABUFSIZE);
5035
5036                 desc = &info->tx_buf_list[i];
5037                 desc_ex = &info->tx_buf_list_ex[i];
5038
5039                 load_pci_memory(info, desc_ex->virt_addr,buf,copy_count);
5040
5041                 desc->length = copy_count;
5042                 desc->status = 0;
5043
5044                 buf += copy_count;
5045                 count -= copy_count;
5046
5047                 if (!count)
5048                         break;
5049
5050                 i++;
5051                 if (i >= info->tx_buf_count)
5052                         i = 0;
5053         }
5054
5055         info->tx_buf_list[i].status = 0x81;     /* set EOM and EOT status */
5056         info->last_tx_buf = ++i;
5057 }
5058
5059 static bool register_test(SLMP_INFO *info)
5060 {
5061         static unsigned char testval[] = {0x00, 0xff, 0xaa, 0x55, 0x69, 0x96};
5062         static unsigned int count = ARRAY_SIZE(testval);
5063         unsigned int i;
5064         bool rc = true;
5065         unsigned long flags;
5066
5067         spin_lock_irqsave(&info->lock,flags);
5068         reset_port(info);
5069
5070         /* assume failure */
5071         info->init_error = DiagStatus_AddressFailure;
5072
5073         /* Write bit patterns to various registers but do it out of */
5074         /* sync, then read back and verify values. */
5075
5076         for (i = 0 ; i < count ; i++) {
5077                 write_reg(info, TMC, testval[i]);
5078                 write_reg(info, IDL, testval[(i+1)%count]);
5079                 write_reg(info, SA0, testval[(i+2)%count]);
5080                 write_reg(info, SA1, testval[(i+3)%count]);
5081
5082                 if ( (read_reg(info, TMC) != testval[i]) ||
5083                           (read_reg(info, IDL) != testval[(i+1)%count]) ||
5084                           (read_reg(info, SA0) != testval[(i+2)%count]) ||
5085                           (read_reg(info, SA1) != testval[(i+3)%count]) )
5086                 {
5087                         rc = false;
5088                         break;
5089                 }
5090         }
5091
5092         reset_port(info);
5093         spin_unlock_irqrestore(&info->lock,flags);
5094
5095         return rc;
5096 }
5097
5098 static bool irq_test(SLMP_INFO *info)
5099 {
5100         unsigned long timeout;
5101         unsigned long flags;
5102
5103         unsigned char timer = (info->port_num & 1) ? TIMER2 : TIMER0;
5104
5105         spin_lock_irqsave(&info->lock,flags);
5106         reset_port(info);
5107
5108         /* assume failure */
5109         info->init_error = DiagStatus_IrqFailure;
5110         info->irq_occurred = false;
5111
5112         /* setup timer0 on SCA0 to interrupt */
5113
5114         /* IER2<7..4> = timer<3..0> interrupt enables (1=enabled) */
5115         write_reg(info, IER2, (unsigned char)((info->port_num & 1) ? BIT6 : BIT4));
5116
5117         write_reg(info, (unsigned char)(timer + TEPR), 0);      /* timer expand prescale */
5118         write_reg16(info, (unsigned char)(timer + TCONR), 1);   /* timer constant */
5119
5120
5121         /* TMCS, Timer Control/Status Register
5122          *
5123          * 07      CMF, Compare match flag (read only) 1=match
5124          * 06      ECMI, CMF Interrupt Enable: 1=enabled
5125          * 05      Reserved, must be 0
5126          * 04      TME, Timer Enable
5127          * 03..00  Reserved, must be 0
5128          *
5129          * 0101 0000
5130          */
5131         write_reg(info, (unsigned char)(timer + TMCS), 0x50);
5132
5133         spin_unlock_irqrestore(&info->lock,flags);
5134
5135         timeout=100;
5136         while( timeout-- && !info->irq_occurred ) {
5137                 msleep_interruptible(10);
5138         }
5139
5140         spin_lock_irqsave(&info->lock,flags);
5141         reset_port(info);
5142         spin_unlock_irqrestore(&info->lock,flags);
5143
5144         return info->irq_occurred;
5145 }
5146
5147 /* initialize individual SCA device (2 ports)
5148  */
5149 static bool sca_init(SLMP_INFO *info)
5150 {
5151         /* set wait controller to single mem partition (low), no wait states */
5152         write_reg(info, PABR0, 0);      /* wait controller addr boundary 0 */
5153         write_reg(info, PABR1, 0);      /* wait controller addr boundary 1 */
5154         write_reg(info, WCRL, 0);       /* wait controller low range */
5155         write_reg(info, WCRM, 0);       /* wait controller mid range */
5156         write_reg(info, WCRH, 0);       /* wait controller high range */
5157
5158         /* DPCR, DMA Priority Control
5159          *
5160          * 07..05  Not used, must be 0
5161          * 04      BRC, bus release condition: 0=all transfers complete
5162          * 03      CCC, channel change condition: 0=every cycle
5163          * 02..00  PR<2..0>, priority 100=round robin
5164          *
5165          * 00000100 = 0x04
5166          */
5167         write_reg(info, DPCR, dma_priority);
5168
5169         /* DMA Master Enable, BIT7: 1=enable all channels */
5170         write_reg(info, DMER, 0x80);
5171
5172         /* enable all interrupt classes */
5173         write_reg(info, IER0, 0xff);    /* TxRDY,RxRDY,TxINT,RxINT (ports 0-1) */
5174         write_reg(info, IER1, 0xff);    /* DMIB,DMIA (channels 0-3) */
5175         write_reg(info, IER2, 0xf0);    /* TIRQ (timers 0-3) */
5176
5177         /* ITCR, interrupt control register
5178          * 07      IPC, interrupt priority, 0=MSCI->DMA
5179          * 06..05  IAK<1..0>, Acknowledge cycle, 00=non-ack cycle
5180          * 04      VOS, Vector Output, 0=unmodified vector
5181          * 03..00  Reserved, must be 0
5182          */
5183         write_reg(info, ITCR, 0);
5184
5185         return true;
5186 }
5187
5188 /* initialize adapter hardware
5189  */
5190 static bool init_adapter(SLMP_INFO *info)
5191 {
5192         int i;
5193
5194         /* Set BIT30 of Local Control Reg 0x50 to reset SCA */
5195         volatile u32 *MiscCtrl = (u32 *)(info->lcr_base + 0x50);
5196         u32 readval;
5197
5198         info->misc_ctrl_value |= BIT30;
5199         *MiscCtrl = info->misc_ctrl_value;
5200
5201         /*
5202          * Force at least 170ns delay before clearing
5203          * reset bit. Each read from LCR takes at least
5204          * 30ns so 10 times for 300ns to be safe.
5205          */
5206         for(i=0;i<10;i++)
5207                 readval = *MiscCtrl;
5208
5209         info->misc_ctrl_value &= ~BIT30;
5210         *MiscCtrl = info->misc_ctrl_value;
5211
5212         /* init control reg (all DTRs off, all clksel=input) */
5213         info->ctrlreg_value = 0xaa;
5214         write_control_reg(info);
5215
5216         {
5217                 volatile u32 *LCR1BRDR = (u32 *)(info->lcr_base + 0x2c);
5218                 lcr1_brdr_value &= ~(BIT5 + BIT4 + BIT3);
5219
5220                 switch(read_ahead_count)
5221                 {
5222                 case 16:
5223                         lcr1_brdr_value |= BIT5 + BIT4 + BIT3;
5224                         break;
5225                 case 8:
5226                         lcr1_brdr_value |= BIT5 + BIT4;
5227                         break;
5228                 case 4:
5229                         lcr1_brdr_value |= BIT5 + BIT3;
5230                         break;
5231                 case 0:
5232                         lcr1_brdr_value |= BIT5;
5233                         break;
5234                 }
5235
5236                 *LCR1BRDR = lcr1_brdr_value;
5237                 *MiscCtrl = misc_ctrl_value;
5238         }
5239
5240         sca_init(info->port_array[0]);
5241         sca_init(info->port_array[2]);
5242
5243         return true;
5244 }
5245
5246 /* Loopback an HDLC frame to test the hardware
5247  * interrupt and DMA functions.
5248  */
5249 static bool loopback_test(SLMP_INFO *info)
5250 {
5251 #define TESTFRAMESIZE 20
5252
5253         unsigned long timeout;
5254         u16 count = TESTFRAMESIZE;
5255         unsigned char buf[TESTFRAMESIZE];
5256         bool rc = false;
5257         unsigned long flags;
5258
5259         struct tty_struct *oldtty = info->port.tty;
5260         u32 speed = info->params.clock_speed;
5261
5262         info->params.clock_speed = 3686400;
5263         info->port.tty = NULL;
5264
5265         /* assume failure */
5266         info->init_error = DiagStatus_DmaFailure;
5267
5268         /* build and send transmit frame */
5269         for (count = 0; count < TESTFRAMESIZE;++count)
5270                 buf[count] = (unsigned char)count;
5271
5272         memset(info->tmp_rx_buf,0,TESTFRAMESIZE);
5273
5274         /* program hardware for HDLC and enabled receiver */
5275         spin_lock_irqsave(&info->lock,flags);
5276         hdlc_mode(info);
5277         enable_loopback(info,1);
5278         rx_start(info);
5279         info->tx_count = count;
5280         tx_load_dma_buffer(info,buf,count);
5281         tx_start(info);
5282         spin_unlock_irqrestore(&info->lock,flags);
5283
5284         /* wait for receive complete */
5285         /* Set a timeout for waiting for interrupt. */
5286         for ( timeout = 100; timeout; --timeout ) {
5287                 msleep_interruptible(10);
5288
5289                 if (rx_get_frame(info)) {
5290                         rc = true;
5291                         break;
5292                 }
5293         }
5294
5295         /* verify received frame length and contents */
5296         if (rc &&
5297             ( info->tmp_rx_buf_count != count ||
5298               memcmp(buf, info->tmp_rx_buf,count))) {
5299                 rc = false;
5300         }
5301
5302         spin_lock_irqsave(&info->lock,flags);
5303         reset_adapter(info);
5304         spin_unlock_irqrestore(&info->lock,flags);
5305
5306         info->params.clock_speed = speed;
5307         info->port.tty = oldtty;
5308
5309         return rc;
5310 }
5311
5312 /* Perform diagnostics on hardware
5313  */
5314 static int adapter_test( SLMP_INFO *info )
5315 {
5316         unsigned long flags;
5317         if ( debug_level >= DEBUG_LEVEL_INFO )
5318                 printk( "%s(%d):Testing device %s\n",
5319                         __FILE__,__LINE__,info->device_name );
5320
5321         spin_lock_irqsave(&info->lock,flags);
5322         init_adapter(info);
5323         spin_unlock_irqrestore(&info->lock,flags);
5324
5325         info->port_array[0]->port_count = 0;
5326
5327         if ( register_test(info->port_array[0]) &&
5328                 register_test(info->port_array[1])) {
5329
5330                 info->port_array[0]->port_count = 2;
5331
5332                 if ( register_test(info->port_array[2]) &&
5333                         register_test(info->port_array[3]) )
5334                         info->port_array[0]->port_count += 2;
5335         }
5336         else {
5337                 printk( "%s(%d):Register test failure for device %s Addr=%08lX\n",
5338                         __FILE__,__LINE__,info->device_name, (unsigned long)(info->phys_sca_base));
5339                 return -ENODEV;
5340         }
5341
5342         if ( !irq_test(info->port_array[0]) ||
5343                 !irq_test(info->port_array[1]) ||
5344                  (info->port_count == 4 && !irq_test(info->port_array[2])) ||
5345                  (info->port_count == 4 && !irq_test(info->port_array[3]))) {
5346                 printk( "%s(%d):Interrupt test failure for device %s IRQ=%d\n",
5347                         __FILE__,__LINE__,info->device_name, (unsigned short)(info->irq_level) );
5348                 return -ENODEV;
5349         }
5350
5351         if (!loopback_test(info->port_array[0]) ||
5352                 !loopback_test(info->port_array[1]) ||
5353                  (info->port_count == 4 && !loopback_test(info->port_array[2])) ||
5354                  (info->port_count == 4 && !loopback_test(info->port_array[3]))) {
5355                 printk( "%s(%d):DMA test failure for device %s\n",
5356                         __FILE__,__LINE__,info->device_name);
5357                 return -ENODEV;
5358         }
5359
5360         if ( debug_level >= DEBUG_LEVEL_INFO )
5361                 printk( "%s(%d):device %s passed diagnostics\n",
5362                         __FILE__,__LINE__,info->device_name );
5363
5364         info->port_array[0]->init_error = 0;
5365         info->port_array[1]->init_error = 0;
5366         if ( info->port_count > 2 ) {
5367                 info->port_array[2]->init_error = 0;
5368                 info->port_array[3]->init_error = 0;
5369         }
5370
5371         return 0;
5372 }
5373
5374 /* Test the shared memory on a PCI adapter.
5375  */
5376 static bool memory_test(SLMP_INFO *info)
5377 {
5378         static unsigned long testval[] = { 0x0, 0x55555555, 0xaaaaaaaa,
5379                 0x66666666, 0x99999999, 0xffffffff, 0x12345678 };
5380         unsigned long count = ARRAY_SIZE(testval);
5381         unsigned long i;
5382         unsigned long limit = SCA_MEM_SIZE/sizeof(unsigned long);
5383         unsigned long * addr = (unsigned long *)info->memory_base;
5384
5385         /* Test data lines with test pattern at one location. */
5386
5387         for ( i = 0 ; i < count ; i++ ) {
5388                 *addr = testval[i];
5389                 if ( *addr != testval[i] )
5390                         return false;
5391         }
5392
5393         /* Test address lines with incrementing pattern over */
5394         /* entire address range. */
5395
5396         for ( i = 0 ; i < limit ; i++ ) {
5397                 *addr = i * 4;
5398                 addr++;
5399         }
5400
5401         addr = (unsigned long *)info->memory_base;
5402
5403         for ( i = 0 ; i < limit ; i++ ) {
5404                 if ( *addr != i * 4 )
5405                         return false;
5406                 addr++;
5407         }
5408
5409         memset( info->memory_base, 0, SCA_MEM_SIZE );
5410         return true;
5411 }
5412
5413 /* Load data into PCI adapter shared memory.
5414  *
5415  * The PCI9050 releases control of the local bus
5416  * after completing the current read or write operation.
5417  *
5418  * While the PCI9050 write FIFO not empty, the
5419  * PCI9050 treats all of the writes as a single transaction
5420  * and does not release the bus. This causes DMA latency problems
5421  * at high speeds when copying large data blocks to the shared memory.
5422  *
5423  * This function breaks a write into multiple transations by
5424  * interleaving a read which flushes the write FIFO and 'completes'
5425  * the write transation. This allows any pending DMA request to gain control
5426  * of the local bus in a timely fasion.
5427  */
5428 static void load_pci_memory(SLMP_INFO *info, char* dest, const char* src, unsigned short count)
5429 {
5430         /* A load interval of 16 allows for 4 32-bit writes at */
5431         /* 136ns each for a maximum latency of 542ns on the local bus.*/
5432
5433         unsigned short interval = count / sca_pci_load_interval;
5434         unsigned short i;
5435
5436         for ( i = 0 ; i < interval ; i++ )
5437         {
5438                 memcpy(dest, src, sca_pci_load_interval);
5439                 read_status_reg(info);
5440                 dest += sca_pci_load_interval;
5441                 src += sca_pci_load_interval;
5442         }
5443
5444         memcpy(dest, src, count % sca_pci_load_interval);
5445 }
5446
5447 static void trace_block(SLMP_INFO *info,const char* data, int count, int xmit)
5448 {
5449         int i;
5450         int linecount;
5451         if (xmit)
5452                 printk("%s tx data:\n",info->device_name);
5453         else
5454                 printk("%s rx data:\n",info->device_name);
5455
5456         while(count) {
5457                 if (count > 16)
5458                         linecount = 16;
5459                 else
5460                         linecount = count;
5461
5462                 for(i=0;i<linecount;i++)
5463                         printk("%02X ",(unsigned char)data[i]);
5464                 for(;i<17;i++)
5465                         printk("   ");
5466                 for(i=0;i<linecount;i++) {
5467                         if (data[i]>=040 && data[i]<=0176)
5468                                 printk("%c",data[i]);
5469                         else
5470                                 printk(".");
5471                 }
5472                 printk("\n");
5473
5474                 data  += linecount;
5475                 count -= linecount;
5476         }
5477 }       /* end of trace_block() */
5478
5479 /* called when HDLC frame times out
5480  * update stats and do tx completion processing
5481  */
5482 static void tx_timeout(unsigned long context)
5483 {
5484         SLMP_INFO *info = (SLMP_INFO*)context;
5485         unsigned long flags;
5486
5487         if ( debug_level >= DEBUG_LEVEL_INFO )
5488                 printk( "%s(%d):%s tx_timeout()\n",
5489                         __FILE__,__LINE__,info->device_name);
5490         if(info->tx_active && info->params.mode == MGSL_MODE_HDLC) {
5491                 info->icount.txtimeout++;
5492         }
5493         spin_lock_irqsave(&info->lock,flags);
5494         info->tx_active = false;
5495         info->tx_count = info->tx_put = info->tx_get = 0;
5496
5497         spin_unlock_irqrestore(&info->lock,flags);
5498
5499 #if SYNCLINK_GENERIC_HDLC
5500         if (info->netcount)
5501                 hdlcdev_tx_done(info);
5502         else
5503 #endif
5504                 bh_transmit(info);
5505 }
5506
5507 /* called to periodically check the DSR/RI modem signal input status
5508  */
5509 static void status_timeout(unsigned long context)
5510 {
5511         u16 status = 0;
5512         SLMP_INFO *info = (SLMP_INFO*)context;
5513         unsigned long flags;
5514         unsigned char delta;
5515
5516
5517         spin_lock_irqsave(&info->lock,flags);
5518         get_signals(info);
5519         spin_unlock_irqrestore(&info->lock,flags);
5520
5521         /* check for DSR/RI state change */
5522
5523         delta = info->old_signals ^ info->serial_signals;
5524         info->old_signals = info->serial_signals;
5525
5526         if (delta & SerialSignal_DSR)
5527                 status |= MISCSTATUS_DSR_LATCHED|(info->serial_signals&SerialSignal_DSR);
5528
5529         if (delta & SerialSignal_RI)
5530                 status |= MISCSTATUS_RI_LATCHED|(info->serial_signals&SerialSignal_RI);
5531
5532         if (delta & SerialSignal_DCD)
5533                 status |= MISCSTATUS_DCD_LATCHED|(info->serial_signals&SerialSignal_DCD);
5534
5535         if (delta & SerialSignal_CTS)
5536                 status |= MISCSTATUS_CTS_LATCHED|(info->serial_signals&SerialSignal_CTS);
5537
5538         if (status)
5539                 isr_io_pin(info,status);
5540
5541         mod_timer(&info->status_timer, jiffies + msecs_to_jiffies(10));
5542 }
5543
5544
5545 /* Register Access Routines -
5546  * All registers are memory mapped
5547  */
5548 #define CALC_REGADDR() \
5549         unsigned char * RegAddr = (unsigned char*)(info->sca_base + Addr); \
5550         if (info->port_num > 1) \
5551                 RegAddr += 256;                 /* port 0-1 SCA0, 2-3 SCA1 */ \
5552         if ( info->port_num & 1) { \
5553                 if (Addr > 0x7f) \
5554                         RegAddr += 0x40;        /* DMA access */ \
5555                 else if (Addr > 0x1f && Addr < 0x60) \
5556                         RegAddr += 0x20;        /* MSCI access */ \
5557         }
5558
5559
5560 static unsigned char read_reg(SLMP_INFO * info, unsigned char Addr)
5561 {
5562         CALC_REGADDR();
5563         return *RegAddr;
5564 }
5565 static void write_reg(SLMP_INFO * info, unsigned char Addr, unsigned char Value)
5566 {
5567         CALC_REGADDR();
5568         *RegAddr = Value;
5569 }
5570
5571 static u16 read_reg16(SLMP_INFO * info, unsigned char Addr)
5572 {
5573         CALC_REGADDR();
5574         return *((u16 *)RegAddr);
5575 }
5576
5577 static void write_reg16(SLMP_INFO * info, unsigned char Addr, u16 Value)
5578 {
5579         CALC_REGADDR();
5580         *((u16 *)RegAddr) = Value;
5581 }
5582
5583 static unsigned char read_status_reg(SLMP_INFO * info)
5584 {
5585         unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5586         return *RegAddr;
5587 }
5588
5589 static void write_control_reg(SLMP_INFO * info)
5590 {
5591         unsigned char *RegAddr = (unsigned char *)info->statctrl_base;
5592         *RegAddr = info->port_array[0]->ctrlreg_value;
5593 }
5594
5595
5596 static int synclinkmp_init_one (struct pci_dev *dev,
5597                                           const struct pci_device_id *ent)
5598 {
5599         if (pci_enable_device(dev)) {
5600                 printk("error enabling pci device %p\n", dev);
5601                 return -EIO;
5602         }
5603         device_init( ++synclinkmp_adapter_count, dev );
5604         return 0;
5605 }
5606
5607 static void synclinkmp_remove_one (struct pci_dev *dev)
5608 {
5609 }