include/configs/cm5200.h

   1 /*
   2  * (C) Copyright 2003-2007
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 /*
  12  * High Level Configuration Options
  13  */
  14 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  15 #define CONFIG_MPC5200          1       /* (more precisely an MPC5200 CPU) */
  16 #define CONFIG_CM5200           1       /* ... on CM5200 platform */
  17
  18 #define CONFIG_SYS_TEXT_BASE    0xfc000000
  19
  20 #define CONFIG_HIGH_BATS        1       /* High BATs supported */
  21
  22 /*
  23  * Supported commands
  24  */
  25 #include <config_cmd_default.h>
  26
  27 #define CONFIG_CMD_ASKENV
  28 #define CONFIG_CMD_BSP
  29 #define CONFIG_CMD_DATE
  30 #define CONFIG_CMD_DHCP
  31 #define CONFIG_CMD_DIAG
  32 #define CONFIG_CMD_FAT
  33 #define CONFIG_CMD_I2C
  34 #define CONFIG_CMD_JFFS2
  35 #define CONFIG_CMD_MII
  36 #define CONFIG_CMD_NFS
  37 #define CONFIG_CMD_PING
  38 #define CONFIG_CMD_REGINFO
  39 #define CONFIG_CMD_SNTP
  40 #define CONFIG_CMD_USB
  41
  42 /*
  43  * Serial console configuration
  44  */
  45 #define CONFIG_PSC_CONSOLE      1       /* console is on PSC1 */
  46 #define CONFIG_BAUDRATE         57600   /* ... at 57600 bps */
  47 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200, 230400 }
  48 #define CONFIG_SILENT_CONSOLE   1       /* needed to silence i2c_init() */
  49
  50 /*
  51  * Ethernet configuration
  52  */
  53 #define CONFIG_MPC5xxx_FEC      1
  54 #define CONFIG_MPC5xxx_FEC_MII100
  55 #define CONFIG_PHY_ADDR         0x00
  56 #define CONFIG_ENV_OVERWRITE    1       /* allow overwriting of ethaddr */
  57 /* use misc_init_r() to read ethaddr from I2C EEPROM (see CONFIG_SYS_I2C_EEPROM) */
  58 #define CONFIG_MISC_INIT_R      1
  59 #define CONFIG_MAC_OFFSET       0x35    /* MAC address offset in I2C EEPROM */
  60
  61 /*
  62  * POST support
  63  */
  64 #define CONFIG_POST             (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU | CONFIG_SYS_POST_I2C)
  65 #define MPC5XXX_SRAM_POST_SIZE  (MPC5XXX_SRAM_SIZE - 4)
  66 /* List of I2C addresses to be verified by POST */
  67 #define CONFIG_SYS_POST_I2C_ADDRS       {CONFIG_SYS_I2C_SLAVE,  \
  68                                          CONFIG_SYS_I2C_IO,     \
  69                                          CONFIG_SYS_I2C_EEPROM}
  70
  71 /* display image timestamps */
  72 #define CONFIG_TIMESTAMP        1
  73
  74 /*
  75  * Autobooting
  76  */
  77 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
  78 #define CONFIG_PREBOOT  "echo;" \
  79         "echo Type \"run net_nfs_fdt\" to mount root filesystem over NFS;" \
  80         "echo"
  81 #undef CONFIG_BOOTARGS
  82
  83 /*
  84  * Default environment settings
  85  */
  86 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  87         "netdev=eth0\0"                                                 \
  88         "netmask=255.255.0.0\0"                                         \
  89         "ipaddr=192.168.160.33\0"                                       \
  90         "serverip=192.168.1.1\0"                                        \
  91         "gatewayip=192.168.1.1\0"                                       \
  92         "console=ttyPSC0\0"                                             \
  93         "u-boot_addr=100000\0"                                          \
  94         "kernel_addr=200000\0"                                          \
  95         "kernel_addr_flash=fc0c0000\0"                                  \
  96         "fdt_addr=400000\0"                                             \
  97         "fdt_addr_flash=fc0a0000\0"                                     \
  98         "ramdisk_addr=500000\0"                                         \
  99         "rootpath=/opt/eldk-4.1/ppc_6xx\0"                              \
 100         "u-boot=/tftpboot/cm5200/u-boot.bin\0"                          \
 101         "bootfile_fdt=/tftpboot/cm5200/uImage\0"                        \
 102         "fdt_file=/tftpboot/cm5200/cm5200.dtb\0"                        \
 103         "load=tftp ${u-boot_addr} ${u-boot}\0"                          \
 104         "update=prot off fc000000 +${filesize}; "                       \
 105                 "era fc000000 +${filesize}; "                           \
 106                 "cp.b ${u-boot_addr} fc000000 ${filesize}; "            \
 107                 "prot on fc000000 +${filesize}\0"                       \
 108         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 109                 "nfsroot=${serverip}:${rootpath}\0"                     \
 110         "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0"            \
 111         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 112         "addinit=setenv bootargs ${bootargs} init=/linuxrc\0"           \
 113         "addcons=setenv bootargs ${bootargs} "                          \
 114                 "console=${console},${baudrate}\0"                      \
 115         "addip=setenv bootargs ${bootargs} "                            \
 116                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 117                 "${netmask}:${hostname}:${netdev}:off panic=1\0"        \
 118         "flash_flash=run flashargs addinit addip addcons;"              \
 119                 "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0"      \
 120         "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; "             \
 121                 "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip "      \
 122                 "addcons; bootm ${kernel_addr} - ${fdt_addr}\0"         \
 123         ""
 124 #define CONFIG_BOOTCOMMAND      "run flash_flash"
 125
 126 /*
 127  * Low level configuration
 128  */
 129
 130 /*
 131  * Clock configuration
 132  */
 133 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000        /* SYS_XTAL_IN = 33MHz */
 134 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK 1       /* IPB = 133MHz */
 135
 136 /*
 137  * Memory map
 138  */
 139 #define CONFIG_SYS_MBAR         0xF0000000
 140 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 141 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 142
 143 #define CONFIG_SYS_LOWBOOT              1
 144
 145 /* Use ON-Chip SRAM until RAM will be available */
 146 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 147 #ifdef CONFIG_POST
 148 /* preserve space for the post_word at end of on-chip SRAM */
 149 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_POST_SIZE
 150 #else
 151 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_SIZE
 152 #endif
 153
 154 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 155 #define CONFIG_BOARD_TYPES      1       /* we use board_type */
 156
 157 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 158
 159 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 160 #define CONFIG_SYS_MONITOR_LEN          (384 << 10)     /* 384 kB for Monitor */
 161 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)     /* 256 kB for malloc() */
 162 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* initial mem map for Linux */
 163
 164 /*
 165  * Flash configuration
 166  */
 167 #define CONFIG_SYS_FLASH_CFI            1
 168 #define CONFIG_FLASH_CFI_DRIVER 1
 169 #define CONFIG_SYS_FLASH_BASE           0xfc000000
 170 /* we need these despite using CFI */
 171 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of flash banks */
 172 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max num of sectors on one chip */
 173 #define CONFIG_SYS_FLASH_SIZE           0x02000000 /* 32 MiB */
 174
 175
 176 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 177 #define CONFIG_SYS_RAMBOOT              1
 178 #undef CONFIG_SYS_LOWBOOT
 179 #endif
 180
 181
 182 /*
 183  * Chip selects configuration
 184  */
 185 /* Boot Chipselect */
 186 #define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
 187 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 188 #define CONFIG_SYS_BOOTCS_CFG           0x00087D31      /* for pci_clk = 33 MHz */
 189 /* use board_early_init_r to enable flash write in CS_BOOT */
 190 #define CONFIG_BOARD_EARLY_INIT_R
 191
 192 /* Flash memory addressing */
 193 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 194 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 195
 196 /* No burst, dead cycle = 1 for CS0 (Flash) */
 197 #define CONFIG_SYS_CS_BURST             0x00000000
 198 #define CONFIG_SYS_CS_DEADCYCLE 0x00000001
 199
 200 /*
 201  * SDRAM configuration
 202  * settings for k4s561632E-xx75, assuming XLB = 132 MHz
 203  */
 204 #define SDRAM_MODE      0x00CD0000      /* CASL 3, burst length 8 */
 205 #define SDRAM_CONTROL   0x514F0000
 206 #define SDRAM_CONFIG1   0xE2333900
 207 #define SDRAM_CONFIG2   0x8EE70000
 208
 209 /*
 210  * MTD configuration
 211  */
 212 #define CONFIG_CMD_MTDPARTS     1
 213 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 214 #define CONFIG_FLASH_CFI_MTD
 215 #define MTDIDS_DEFAULT          "nor0=cm5200-0"
 216 #define MTDPARTS_DEFAULT        "mtdparts=cm5200-0:"                    \
 217                                         "384k(uboot),128k(env),"        \
 218                                         "128k(redund_env),128k(dtb),"   \
 219                                         "2m(kernel),27904k(rootfs),"    \
 220                                         "-(config)"
 221
 222 /*
 223  * I2C configuration
 224  */
 225 #define CONFIG_HARD_I2C         1       /* I2C with hardware support */
 226 #define CONFIG_SYS_I2C_MODULE           2       /* Select I2C module #2 */
 227 #define CONFIG_SYS_I2C_SPEED            40000   /* 40 kHz */
 228 #define CONFIG_SYS_I2C_SLAVE            0x0
 229 #define CONFIG_SYS_I2C_IO               0x38    /* PCA9554AD I2C I/O port address */
 230 #define CONFIG_SYS_I2C_EEPROM           0x53    /* I2C EEPROM device address */
 231
 232 /*
 233  * RTC configuration
 234  */
 235 #define CONFIG_RTC_MPC5200      1       /* use internal MPC5200 RTC */
 236
 237 /*
 238  * USB configuration
 239  */
 240 #define CONFIG_USB_OHCI         1
 241 #define CONFIG_USB_STORAGE      1
 242 #define CONFIG_USB_CLOCK        0x0001BBBB
 243 #define CONFIG_USB_CONFIG       0x00001000
 244 /* Partitions (for USB) */
 245 #define CONFIG_MAC_PARTITION    1
 246 #define CONFIG_DOS_PARTITION    1
 247 #define CONFIG_ISO_PARTITION    1
 248
 249 /*
 250  * Invoke our last_stage_init function - needed by fwupdate
 251  */
 252 #define CONFIG_LAST_STAGE_INIT  1
 253
 254 /*
 255  * Environment settings
 256  */
 257 #define CONFIG_ENV_IS_IN_FLASH  1
 258 #define CONFIG_ENV_SIZE         0x10000
 259 #define CONFIG_ENV_SECT_SIZE    0x20000
 260 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 261 /* Configuration of redundant environment */
 262 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
 263 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 264
 265 /*
 266  * Pin multiplexing configuration
 267  */
 268
 269 /*
 270  * CS1/GPIO_WKUP_6: GPIO (default)
 271  * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1
 272  * IRDA/PSC6: UART
 273  * Ether: Ethernet 100Mbit with MD
 274  * PCI_DIS: PCI controller disabled
 275  * USB: USB
 276  * PSC3: SPI with UART3
 277  * PSC2: UART
 278  * PSC1: UART
 279  */
 280 #define CONFIG_SYS_GPS_PORT_CONFIG      0x10559C44
 281
 282 /*
 283  * Miscellaneous configurable options
 284  */
 285 #define CONFIG_SYS_LONGHELP             1       /* undef to save memory */
 286 #define CONFIG_SYS_PROMPT               "=> "   /* Monitor Command Prompt */
 287 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 288 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 289 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 290 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 291
 292 #define CONFIG_SYS_ALT_MEMTEST          1
 293 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
 294 #define CONFIG_SYS_MEMTEST_END          0x03f00000      /* 1 .. 63 MiB in SDRAM */
 295
 296 #define CONFIG_LOOPW            1
 297
 298 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 299 #define CONFIG_SYS_HZ                   1000    /* decrementer freq: 1 ms ticks */
 300
 301 /*
 302  * Various low-level settings
 303  */
 304 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 305 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 306
 307 #define CONFIG_SYS_XLB_PIPELINING       1       /* enable transaction pipeling */
 308
 309 /*
 310  * Cache Configuration
 311  */
 312 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
 313 #ifdef CONFIG_CMD_KGDB
 314 #define CONFIG_SYS_CACHELINE_SHIFT      5       /* log base 2 of the above value */
 315 #endif
 316
 317 /*
 318  * Flat Device Tree support
 319  */
 320 #define CONFIG_OF_LIBFDT        1
 321 #define CONFIG_OF_BOARD_SETUP   1
 322 #define OF_CPU                  "PowerPC,5200@0"
 323 #define OF_SOC                  "soc5200@f0000000"
 324 #define OF_TBCLK                (bd->bi_busfreq / 4)
 325 #define OF_STDOUT_PATH          "/soc5200@f0000000/serial@2000"
 326
 327 #endif /* __CONFIG_H */