include/configs/mx6cuboxi.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the SolidRun mx6 based boards
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8 #ifndef __MX6CUBOXI_CONFIG_H
   9 #define __MX6CUBOXI_CONFIG_H
  10
  11 #include <linux/sizes.h>
  12 #include <asm/arch/imx-regs.h>
  13 #include <asm/imx-common/gpio.h>
  14 #include "mx6_common.h"
  15
  16 #define CONFIG_MX6
  17 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  18 #define CONFIG_SPL_MMC_SUPPORT
  19 #include "imx6_spl.h"
  20
  21 #define CONFIG_DISPLAY_CPUINFO
  22 #define CONFIG_DISPLAY_BOARDINFO
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27 #define CONFIG_IMX6_THERMAL
  28 #define CONFIG_SYS_GENERIC_BOARD
  29
  30 #define CONFIG_SYS_MALLOC_LEN           (2 * SZ_1M)
  31 #define CONFIG_BOARD_EARLY_INIT_F
  32 #define CONFIG_MXC_GPIO
  33 #define CONFIG_MXC_UART
  34 #define CONFIG_CMD_FUSE
  35 #define CONFIG_MXC_OCOTP
  36
  37 /* MMC Configs */
  38 #define CONFIG_FSL_ESDHC
  39 #define CONFIG_FSL_USDHC
  40 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC2_BASE_ADDR
  41 #define CONFIG_MMC
  42 #define CONFIG_CMD_MMC
  43 #define CONFIG_GENERIC_MMC
  44 #define CONFIG_BOUNCE_BUFFER
  45 #define CONFIG_CMD_EXT4
  46 #define CONFIG_CMD_EXT4_WRITE
  47 #define CONFIG_CMD_FAT
  48 #define CONFIG_DOS_PARTITION
  49
  50 /* Ethernet Configuration */
  51 #define CONFIG_FEC_MXC
  52 #define CONFIG_CMD_PING
  53 #define CONFIG_CMD_DHCP
  54 #define CONFIG_CMD_MII
  55 #define CONFIG_CMD_NET
  56 #define CONFIG_MII
  57 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  58 #define CONFIG_FEC_XCV_TYPE             RGMII
  59 #define CONFIG_FEC_MXC_PHYADDR          0
  60 #define CONFIG_PHYLIB
  61 #define CONFIG_PHY_ATHEROS
  62
  63 /* allow to overwrite serial and ethaddr */
  64 #define CONFIG_ENV_OVERWRITE
  65 #define CONFIG_CONS_INDEX               1
  66 #define CONFIG_BAUDRATE                 115200
  67
  68 #define CONFIG_SYS_NO_FLASH
  69
  70 /* Command definition */
  71 #include <config_cmd_default.h>
  72
  73 #define CONFIG_CMD_BOOTZ
  74 #define CONFIG_CMD_SETEXPR
  75
  76 #define CONFIG_BOOTDELAY                1
  77
  78 #define CONFIG_LOADADDR                 0x12000000
  79 #define CONFIG_SYS_TEXT_BASE            0x17800000
  80
  81 #define CONFIG_MXC_UART_BASE    UART1_BASE
  82 #define CONFIG_CONSOLE_DEV      "ttymxc0"
  83 #define CONFIG_MMCROOT          "/dev/mmcblk0p2"
  84 #define CONFIG_DEFAULT_FDT_FILE "imx6q-hummingboard.dtb"
  85 #define CONFIG_SYS_FSL_USDHC_NUM        1
  86 #define CONFIG_SYS_MMC_ENV_DEV          0       /* SDHC2 */
  87
  88 #define CONFIG_EXTRA_ENV_SETTINGS \
  89         "script=boot.scr\0" \
  90         "image=zImage\0" \
  91         "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
  92         "fdt_addr_r=0x18000000\0" \
  93         "boot_fdt=try\0" \
  94         "ip_dyn=yes\0" \
  95         "console=" CONFIG_CONSOLE_DEV "\0" \
  96         "bootm_size=0x10000000\0" \
  97         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  98         "mmcpart=1\0" \
  99         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 100         "update_sd_firmware=" \
 101                 "if test ${ip_dyn} = yes; then " \
 102                         "setenv get_cmd dhcp; " \
 103                 "else " \
 104                         "setenv get_cmd tftp; " \
 105                 "fi; " \
 106                 "if mmc dev ${mmcdev}; then "   \
 107                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 108                                 "setexpr fw_sz ${filesize} / 0x200; " \
 109                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 110                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 111                         "fi; "  \
 112                 "fi\0" \
 113         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 114                 "root=${mmcroot}\0" \
 115         "loadbootscript=" \
 116                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 117         "bootscript=echo Running bootscript from mmc ...; " \
 118                 "source\0" \
 119         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 120         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
 121         "mmcboot=echo Booting from mmc ...; " \
 122                 "run mmcargs; " \
 123                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 124                         "if run loadfdt; then " \
 125                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 126                         "else " \
 127                                 "if test ${boot_fdt} = try; then " \
 128                                         "bootz; " \
 129                                 "else " \
 130                                         "echo WARN: Cannot load the DT; " \
 131                                 "fi; " \
 132                         "fi; " \
 133                 "else " \
 134                         "bootz; " \
 135                 "fi;\0" \
 136         "netargs=setenv bootargs console=${console},${baudrate} " \
 137                 "root=/dev/nfs " \
 138                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 139         "netboot=echo Booting from net ...; " \
 140                 "run netargs; " \
 141                 "if test ${ip_dyn} = yes; then " \
 142                         "setenv get_cmd dhcp; " \
 143                 "else " \
 144                         "setenv get_cmd tftp; " \
 145                 "fi; " \
 146                 "${get_cmd} ${image}; " \
 147                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 148                         "if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
 149                                 "bootz ${loadaddr} - ${fdt_addr_r}; " \
 150                         "else " \
 151                                 "if test ${boot_fdt} = try; then " \
 152                                         "bootz; " \
 153                                 "else " \
 154                                         "echo WARN: Cannot load the DT; " \
 155                                 "fi; " \
 156                         "fi; " \
 157                 "else " \
 158                         "bootz; " \
 159                 "fi;\0"
 160
 161 #define CONFIG_BOOTCOMMAND \
 162         "mmc dev ${mmcdev};" \
 163         "if mmc rescan; then " \
 164                 "if run loadbootscript; then " \
 165                 "run bootscript; " \
 166                 "else " \
 167                         "if run loadimage; then " \
 168                                 "run mmcboot; " \
 169                         "else run netboot; " \
 170                         "fi; " \
 171                 "fi; " \
 172         "else run netboot; fi"
 173
 174 /* Miscellaneous configurable options */
 175 #define CONFIG_SYS_LONGHELP
 176 #define CONFIG_SYS_HUSH_PARSER
 177 #define CONFIG_AUTO_COMPLETE
 178 #define CONFIG_SYS_CBSIZE              256
 179 #define CONFIG_SYS_MAXARGS             16
 180 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 181
 182 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 183
 184 #define CONFIG_CMDLINE_EDITING
 185
 186 /* Physical Memory Map */
 187 #define CONFIG_NR_DRAM_BANKS           1
 188 #define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
 189 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 190 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 191
 192 #define CONFIG_SYS_INIT_SP_OFFSET \
 193         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 194 #define CONFIG_SYS_INIT_SP_ADDR \
 195         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 196
 197 /* Environment organization */
 198 #define CONFIG_ENV_SIZE                 (8 * 1024)
 199 #define CONFIG_ENV_IS_IN_MMC
 200 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 201
 202 #define CONFIG_OF_LIBFDT
 203 #define CONFIG_CMD_CACHE
 204
 205 #endif                         /* __MX6CUBOXI_CONFIG_H */