]> git.kernelconcepts.de Git - karo-tx-uboot.git/blob - include/configs/o2i.h
Merge branch 'master' of git://git.denx.de/u-boot-i2c
[karo-tx-uboot.git] / include / configs / o2i.h
1 /*
2  * (C) Copyright 2012
3  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
4  *
5  * SPDX-License-Identifier:     GPL-2.0+
6  */
7
8 /*
9  * Valid values for CONFIG_SYS_TEXT_BASE are:
10  * 0xFF000000   boot low boot high (standard configuration)
11  * 0x00100000   boot from RAM (for testing only)
12  */
13 #ifndef CONFIG_SYS_TEXT_BASE
14 #define CONFIG_SYS_TEXT_BASE    0xff000000      /* Standard: boot low */
15 #endif
16
17 /* Board specific flash config */
18 #define CONFIG_SYS_FLASH_BASE           0xff000000
19 #define CONFIG_SYS_FLASH_SIZE           0x01000000      /* maximum 16MB */
20 /* max number of sectors on one chip */
21 #define CONFIG_SYS_MAX_FLASH_SECT       128
22
23 /*
24  * Include common defines for all ifm boards
25  */
26 #include "o2dnt-common.h"
27
28 /* GPIO configuration */
29 #define CONFIG_SYS_GPS_PORT_CONFIG      0x00002006      /* no CAN */
30
31 /* Other board specific configs */
32 #define CONFIG_SYS_BOOTCS_CFG           0x00087801
33 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
34
35 #define CONFIG_SYS_MEMTEST_START        0x00100000      /* memtest works on */
36 #define CONFIG_SYS_MEMTEST_END          0x03f00000      /* 1 - 63 MB in DRAM  */
37
38 #define CONFIG_BOARD_NAME               "o2i"
39 #define CONFIG_BOARD_BOOTCMD            "run dhcp_boot"
40 #define CONFIG_BOARD_MEM_LIMIT          xstr(62)
41 #define BOARD_POST_CRC32_END            xstr(0x01000000)
42
43 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
44         CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
45         CONFIG_IFM_DEFAULT_ENV_OLD                                      \
46         CONFIG_IFM_DEFAULT_ENV_NEW                                      \
47         "linbot=ff060000\0"                                             \
48         "lintop=ff15ffff\0"                                             \
49         "rambot=ff160000\0"                                             \
50         "ramtop=ff55ffff\0"                                             \
51         "jffbot=ff560000\0"                                             \
52         "jfftop=ffebffff\0"                                             \
53         "kernel_addr=0xff060000\0"                                      \
54         "ramdisk_addr=0xff160000\0"                                     \
55         "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0"                      \
56         "ubotop=ff03ffff\0"                                             \
57         "autoload=no\0"                                                 \
58         "dhcp_boot=run dhcpcmd; run flash_mtd\0"                        \
59         "hostname=IFM_SENSOR\0"                                         \
60         "flash_mtd=run mtd_args addip addmem;bootm ${kernel_addr}\0"    \
61         "mtd_args=setenv bootargs root=/dev/mtdblock3 "                 \
62                 "rw rootfstype=cramfs\0"                                \
63         "sensorType=O2I100AA\0"                                         \
64         "netretry=once\0"                                               \
65         "master=mw f0000b00 0x00052006;mw f0000b0c ${IOpin};"           \
66                 "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"