2 * (C) Copyright 2009-2014
3 * Gerald Kerma <dreagle@doukki.net>
4 * Marvell Semiconductor <www.marvell.com>
5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
7 * SPDX-License-Identifier: GPL-2.0+
10 #ifndef _CONFIG_SHEEVAPLUG_H
11 #define _CONFIG_SHEEVAPLUG_H
14 * Version number information
16 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug"
19 * High Level Configuration Options (easy to change)
21 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
22 #define CONFIG_KW88F6281 1 /* SOC Name */
23 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */
24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
27 * Compression configuration
34 * Commands configuration
36 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
37 #include <config_cmd_default.h>
38 #define CONFIG_CMD_BOOTZ
39 #define CONFIG_CMD_DHCP
40 #define CONFIG_CMD_ENV
41 #define CONFIG_CMD_IDE
42 #define CONFIG_CMD_MII
43 #define CONFIG_CMD_MMC
44 #define CONFIG_CMD_NAND
45 #define CONFIG_CMD_PING
46 #define CONFIG_CMD_USB
48 * mv-common.h should be defined after CMD configs since it used them
49 * to enable certain macros
51 #include "mv-common.h"
54 * Environment variables configurations
56 #ifdef CONFIG_CMD_NAND
57 #define CONFIG_ENV_IS_IN_NAND 1
58 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
60 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
63 * max 4k env size is enough, but in case of nand
64 * it has to be rounded to sector size
66 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
67 #define CONFIG_ENV_ADDR 0x80000
68 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
71 * Default environment variables
73 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
74 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
75 "${x_bootcmd_usb}; bootm 0x6400000;"
77 #define CONFIG_MTDPARTS \
78 "mtdparts=orion_nand:512K(uboot)," \
79 "512K(env),1M(script),6M(kernel)," \
80 "12M(ramdisk),4M(spare),-(rootfs)"
82 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
83 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
84 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
85 "x_bootcmd_usb=usb start\0" \
86 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
88 #define MTDIDS_DEFAULT "nand0=orion_nand"
90 #define MTDPARTS_DEFAULT \
91 "mtdparts="CONFIG_MTDPARTS
94 * Ethernet Driver configuration
97 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
98 #define CONFIG_PHY_BASE_ADR 0
99 #endif /* CONFIG_CMD_NET */
102 * SDIO/MMC Card Configuration
104 #ifdef CONFIG_CMD_MMC
106 #define CONFIG_GENERIC_MMC
107 #define CONFIG_MVEBU_MMC
108 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
109 #endif /* CONFIG_CMD_MMC */
112 * SATA driver configuration
114 #ifdef CONFIG_CMD_IDE
116 #define CONFIG_IDE_PREINIT
117 #define CONFIG_DOS_PARTITION
118 #define CONFIG_MVSATA_IDE_USE_PORT0
119 #define CONFIG_MVSATA_IDE_USE_PORT1
120 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
121 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
122 #endif /* CONFIG_CMD_IDE */
127 #define CONFIG_CMD_EXT2
128 #define CONFIG_CMD_EXT4
129 #define CONFIG_CMD_FAT
130 #define CONFIG_CMD_JFFS2
131 #define CONFIG_CMD_UBI
132 #define CONFIG_CMD_UBIFS
133 #define CONFIG_RBTREE
134 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
135 #define CONFIG_MTD_PARTITIONS
136 #define CONFIG_CMD_MTDPARTS
139 #endif /* _CONFIG_SHEEVAPLUG_H */