2 * Structures and registers for GPIO access in the Nomadik SoC
4 * Copyright (C) 2008 STMicroelectronics
5 * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
6 * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
13 #ifndef __PLAT_NOMADIK_GPIO
14 #define __PLAT_NOMADIK_GPIO
17 * pin configurations are represented by 32-bit integers:
19 * bit 0.. 8 - Pin Number (512 Pins Maximum)
20 * bit 9..10 - Alternate Function Selection
21 * bit 11..12 - Pull up/down state
22 * bit 13 - Sleep mode behaviour
24 * bit 15 - Value (if output)
25 * bit 16..18 - SLPM pull up/down state
26 * bit 19..20 - SLPM direction
27 * bit 21..22 - SLPM Value (if output)
28 * bit 23..25 - PDIS value (if input)
32 * to facilitate the definition, the following macros are provided
34 * PIN_CFG_DEFAULT - default config (0):
35 * pull up/down = disabled
36 * sleep mode = input/wakeup
39 * SLPM direction = same as normal
40 * SLPM pull = same as normal
41 * SLPM value = same as normal
43 * PIN_CFG - default config with alternate function
46 typedef unsigned long pin_cfg_t;
48 #define PIN_NUM_MASK 0x1ff
49 #define PIN_NUM(x) ((x) & PIN_NUM_MASK)
51 #define PIN_ALT_SHIFT 9
52 #define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT)
53 #define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
54 #define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
55 #define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT)
56 #define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT)
57 #define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT)
59 #define PIN_PULL_SHIFT 11
60 #define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT)
61 #define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
62 #define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT)
63 #define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT)
64 #define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
66 #define PIN_SLPM_SHIFT 13
67 #define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT)
68 #define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
69 #define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
70 #define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
71 /* These two replace the above in DB8500v2+ */
72 #define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
73 #define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
74 #define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE
76 #define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */
77 #define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */
79 #define PIN_DIR_SHIFT 14
80 #define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT)
81 #define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
82 #define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT)
83 #define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT)
85 #define PIN_VAL_SHIFT 15
86 #define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT)
87 #define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
88 #define PIN_VAL_LOW (0 << PIN_VAL_SHIFT)
89 #define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT)
91 #define PIN_SLPM_PULL_SHIFT 16
92 #define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT)
93 #define PIN_SLPM_PULL(x) \
94 (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
95 #define PIN_SLPM_PULL_NONE \
96 ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
97 #define PIN_SLPM_PULL_UP \
98 ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
99 #define PIN_SLPM_PULL_DOWN \
100 ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
102 #define PIN_SLPM_DIR_SHIFT 19
103 #define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT)
104 #define PIN_SLPM_DIR(x) \
105 (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
106 #define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT)
107 #define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT)
109 #define PIN_SLPM_VAL_SHIFT 21
110 #define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT)
111 #define PIN_SLPM_VAL(x) \
112 (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
113 #define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT)
114 #define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT)
116 #define PIN_SLPM_PDIS_SHIFT 23
117 #define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT)
118 #define PIN_SLPM_PDIS(x) \
119 (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT)
120 #define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT)
121 #define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT)
122 #define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT)
124 #define PIN_LOWEMI_SHIFT 25
125 #define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT)
126 #define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT)
127 #define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT)
128 #define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT)
130 #define PIN_GPIOMODE_SHIFT 26
131 #define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT)
132 #define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT)
133 #define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT)
134 #define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT)
136 #define PIN_SLEEPMODE_SHIFT 27
137 #define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT)
138 #define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT)
139 #define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT)
140 #define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT)
143 /* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */
144 #define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN)
145 #define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP)
146 #define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE)
147 #define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW)
148 #define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
150 #define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
151 #define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
152 #define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
153 #define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
154 #define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
156 #define PIN_CFG_DEFAULT (0)
158 #define PIN_CFG(num, alt) \
160 (PIN_NUM(num) | PIN_##alt))
162 #define PIN_CFG_INPUT(num, alt, pull) \
164 (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
166 #define PIN_CFG_OUTPUT(num, alt, val) \
168 (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
171 * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving
172 * the "gpio" namespace for generic and cross-machine functions
175 #define GPIO_BLOCK_SHIFT 5
176 #define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT)
178 /* Register in the logic block */
179 #define NMK_GPIO_DAT 0x00
180 #define NMK_GPIO_DATS 0x04
181 #define NMK_GPIO_DATC 0x08
182 #define NMK_GPIO_PDIS 0x0c
183 #define NMK_GPIO_DIR 0x10
184 #define NMK_GPIO_DIRS 0x14
185 #define NMK_GPIO_DIRC 0x18
186 #define NMK_GPIO_SLPC 0x1c
187 #define NMK_GPIO_AFSLA 0x20
188 #define NMK_GPIO_AFSLB 0x24
189 #define NMK_GPIO_LOWEMI 0x28
191 #define NMK_GPIO_RIMSC 0x40
192 #define NMK_GPIO_FIMSC 0x44
193 #define NMK_GPIO_IS 0x48
194 #define NMK_GPIO_IC 0x4c
195 #define NMK_GPIO_RWIMSC 0x50
196 #define NMK_GPIO_FWIMSC 0x54
197 #define NMK_GPIO_WKS 0x58
198 /* These appear in DB8540 and later ASICs */
199 #define NMK_GPIO_EDGELEVEL 0x5C
200 #define NMK_GPIO_LEVEL 0x60
202 /* Alternate functions: function C is set in hw by setting both A and B */
203 #define NMK_GPIO_ALT_GPIO 0
204 #define NMK_GPIO_ALT_A 1
205 #define NMK_GPIO_ALT_B 2
206 #define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B)
208 #define NMK_GPIO_ALT_CX_SHIFT 2
209 #define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
210 #define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
211 #define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
212 #define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C)
214 /* Pull up/down values */
224 NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT,
225 NMK_GPIO_SLPM_NOCHANGE,
226 NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE,
230 * Platform data to register a block: only the initial gpio/irq number.
232 struct nmk_gpio_platform_data {
237 u32 (*get_secondary_status)(unsigned int bank);
238 void (*set_ioforce)(bool enable);
239 bool supports_sleepmode;
242 #endif /* __PLAT_NOMADIK_GPIO */