]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - include/linux/regulator/consumer.h
Merge branch 'usb-midi-fix-3.7' of git://git.alsa-project.org/alsa-kprivate into...
[karo-tx-linux.git] / include / linux / regulator / consumer.h
1 /*
2  * consumer.h -- SoC Regulator consumer support.
3  *
4  * Copyright (C) 2007, 2008 Wolfson Microelectronics PLC.
5  *
6  * Author: Liam Girdwood <lrg@slimlogic.co.uk>
7  *
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License version 2 as
10  * published by the Free Software Foundation.
11  *
12  * Regulator Consumer Interface.
13  *
14  * A Power Management Regulator framework for SoC based devices.
15  * Features:-
16  *   o Voltage and current level control.
17  *   o Operating mode control.
18  *   o Regulator status.
19  *   o sysfs entries for showing client devices and status
20  *
21  * EXPERIMENTAL FEATURES:
22  *   Dynamic Regulator operating Mode Switching (DRMS) - allows regulators
23  *   to use most efficient operating mode depending upon voltage and load and
24  *   is transparent to client drivers.
25  *
26  *   e.g. Devices x,y,z share regulator r. Device x and y draw 20mA each during
27  *   IO and 1mA at idle. Device z draws 100mA when under load and 5mA when
28  *   idling. Regulator r has > 90% efficiency in NORMAL mode at loads > 100mA
29  *   but this drops rapidly to 60% when below 100mA. Regulator r has > 90%
30  *   efficiency in IDLE mode at loads < 10mA. Thus regulator r will operate
31  *   in normal mode for loads > 10mA and in IDLE mode for load <= 10mA.
32  *
33  */
34
35 #ifndef __LINUX_REGULATOR_CONSUMER_H_
36 #define __LINUX_REGULATOR_CONSUMER_H_
37
38 struct device;
39 struct notifier_block;
40
41 /*
42  * Regulator operating modes.
43  *
44  * Regulators can run in a variety of different operating modes depending on
45  * output load. This allows further system power savings by selecting the
46  * best (and most efficient) regulator mode for a desired load.
47  *
48  * Most drivers will only care about NORMAL. The modes below are generic and
49  * will probably not match the naming convention of your regulator data sheet
50  * but should match the use cases in the datasheet.
51  *
52  * In order of power efficiency (least efficient at top).
53  *
54  *  Mode       Description
55  *  FAST       Regulator can handle fast changes in it's load.
56  *             e.g. useful in CPU voltage & frequency scaling where
57  *             load can quickly increase with CPU frequency increases.
58  *
59  *  NORMAL     Normal regulator power supply mode. Most drivers will
60  *             use this mode.
61  *
62  *  IDLE       Regulator runs in a more efficient mode for light
63  *             loads. Can be used for devices that have a low power
64  *             requirement during periods of inactivity. This mode
65  *             may be more noisy than NORMAL and may not be able
66  *             to handle fast load switching.
67  *
68  *  STANDBY    Regulator runs in the most efficient mode for very
69  *             light loads. Can be used by devices when they are
70  *             in a sleep/standby state. This mode is likely to be
71  *             the most noisy and may not be able to handle fast load
72  *             switching.
73  *
74  * NOTE: Most regulators will only support a subset of these modes. Some
75  * will only just support NORMAL.
76  *
77  * These modes can be OR'ed together to make up a mask of valid register modes.
78  */
79
80 #define REGULATOR_MODE_FAST                     0x1
81 #define REGULATOR_MODE_NORMAL                   0x2
82 #define REGULATOR_MODE_IDLE                     0x4
83 #define REGULATOR_MODE_STANDBY                  0x8
84
85 /*
86  * Regulator notifier events.
87  *
88  * UNDER_VOLTAGE  Regulator output is under voltage.
89  * OVER_CURRENT   Regulator output current is too high.
90  * REGULATION_OUT Regulator output is out of regulation.
91  * FAIL           Regulator output has failed.
92  * OVER_TEMP      Regulator over temp.
93  * FORCE_DISABLE  Regulator forcibly shut down by software.
94  * VOLTAGE_CHANGE Regulator voltage changed.
95  * DISABLE        Regulator was disabled.
96  *
97  * NOTE: These events can be OR'ed together when passed into handler.
98  */
99
100 #define REGULATOR_EVENT_UNDER_VOLTAGE           0x01
101 #define REGULATOR_EVENT_OVER_CURRENT            0x02
102 #define REGULATOR_EVENT_REGULATION_OUT          0x04
103 #define REGULATOR_EVENT_FAIL                    0x08
104 #define REGULATOR_EVENT_OVER_TEMP               0x10
105 #define REGULATOR_EVENT_FORCE_DISABLE           0x20
106 #define REGULATOR_EVENT_VOLTAGE_CHANGE          0x40
107 #define REGULATOR_EVENT_DISABLE                 0x80
108
109 struct regulator;
110
111 /**
112  * struct regulator_bulk_data - Data used for bulk regulator operations.
113  *
114  * @supply:   The name of the supply.  Initialised by the user before
115  *            using the bulk regulator APIs.
116  * @consumer: The regulator consumer for the supply.  This will be managed
117  *            by the bulk API.
118  *
119  * The regulator APIs provide a series of regulator_bulk_() API calls as
120  * a convenience to consumers which require multiple supplies.  This
121  * structure is used to manage data for these calls.
122  */
123 struct regulator_bulk_data {
124         const char *supply;
125         struct regulator *consumer;
126
127         /* private: Internal use */
128         int ret;
129 };
130
131 #if defined(CONFIG_REGULATOR)
132
133 /* regulator get and put */
134 struct regulator *__must_check regulator_get(struct device *dev,
135                                              const char *id);
136 struct regulator *__must_check devm_regulator_get(struct device *dev,
137                                              const char *id);
138 struct regulator *__must_check regulator_get_exclusive(struct device *dev,
139                                                        const char *id);
140 void regulator_put(struct regulator *regulator);
141 void devm_regulator_put(struct regulator *regulator);
142
143 /* regulator output control and status */
144 int regulator_enable(struct regulator *regulator);
145 int regulator_disable(struct regulator *regulator);
146 int regulator_force_disable(struct regulator *regulator);
147 int regulator_is_enabled(struct regulator *regulator);
148 int regulator_disable_deferred(struct regulator *regulator, int ms);
149
150 int regulator_bulk_get(struct device *dev, int num_consumers,
151                        struct regulator_bulk_data *consumers);
152 int devm_regulator_bulk_get(struct device *dev, int num_consumers,
153                             struct regulator_bulk_data *consumers);
154 int regulator_bulk_enable(int num_consumers,
155                           struct regulator_bulk_data *consumers);
156 int regulator_bulk_disable(int num_consumers,
157                            struct regulator_bulk_data *consumers);
158 int regulator_bulk_force_disable(int num_consumers,
159                            struct regulator_bulk_data *consumers);
160 void regulator_bulk_free(int num_consumers,
161                          struct regulator_bulk_data *consumers);
162
163 int regulator_count_voltages(struct regulator *regulator);
164 int regulator_list_voltage(struct regulator *regulator, unsigned selector);
165 int regulator_is_supported_voltage(struct regulator *regulator,
166                                    int min_uV, int max_uV);
167 int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV);
168 int regulator_set_voltage_time(struct regulator *regulator,
169                                int old_uV, int new_uV);
170 int regulator_get_voltage(struct regulator *regulator);
171 int regulator_sync_voltage(struct regulator *regulator);
172 int regulator_set_current_limit(struct regulator *regulator,
173                                int min_uA, int max_uA);
174 int regulator_get_current_limit(struct regulator *regulator);
175
176 int regulator_set_mode(struct regulator *regulator, unsigned int mode);
177 unsigned int regulator_get_mode(struct regulator *regulator);
178 int regulator_set_optimum_mode(struct regulator *regulator, int load_uA);
179
180 int regulator_allow_bypass(struct regulator *regulator, bool allow);
181
182 /* regulator notifier block */
183 int regulator_register_notifier(struct regulator *regulator,
184                               struct notifier_block *nb);
185 int regulator_unregister_notifier(struct regulator *regulator,
186                                 struct notifier_block *nb);
187
188 /* driver data - core doesn't touch */
189 void *regulator_get_drvdata(struct regulator *regulator);
190 void regulator_set_drvdata(struct regulator *regulator, void *data);
191
192 #else
193
194 /*
195  * Make sure client drivers will still build on systems with no software
196  * controllable voltage or current regulators.
197  */
198 static inline struct regulator *__must_check regulator_get(struct device *dev,
199         const char *id)
200 {
201         /* Nothing except the stubbed out regulator API should be
202          * looking at the value except to check if it is an error
203          * value. Drivers are free to handle NULL specifically by
204          * skipping all regulator API calls, but they don't have to.
205          * Drivers which don't, should make sure they properly handle
206          * corner cases of the API, such as regulator_get_voltage()
207          * returning 0.
208          */
209         return NULL;
210 }
211
212 static inline struct regulator *__must_check
213 devm_regulator_get(struct device *dev, const char *id)
214 {
215         return NULL;
216 }
217
218 static inline void regulator_put(struct regulator *regulator)
219 {
220 }
221
222 static inline void devm_regulator_put(struct regulator *regulator)
223 {
224 }
225
226 static inline int regulator_enable(struct regulator *regulator)
227 {
228         return 0;
229 }
230
231 static inline int regulator_disable(struct regulator *regulator)
232 {
233         return 0;
234 }
235
236 static inline int regulator_force_disable(struct regulator *regulator)
237 {
238         return 0;
239 }
240
241 static inline int regulator_disable_deferred(struct regulator *regulator,
242                                              int ms)
243 {
244         return 0;
245 }
246
247 static inline int regulator_is_enabled(struct regulator *regulator)
248 {
249         return 1;
250 }
251
252 static inline int regulator_bulk_get(struct device *dev,
253                                      int num_consumers,
254                                      struct regulator_bulk_data *consumers)
255 {
256         return 0;
257 }
258
259 static inline int devm_regulator_bulk_get(struct device *dev, int num_consumers,
260                                           struct regulator_bulk_data *consumers)
261 {
262         return 0;
263 }
264
265 static inline int regulator_bulk_enable(int num_consumers,
266                                         struct regulator_bulk_data *consumers)
267 {
268         return 0;
269 }
270
271 static inline int regulator_bulk_disable(int num_consumers,
272                                          struct regulator_bulk_data *consumers)
273 {
274         return 0;
275 }
276
277 static inline int regulator_bulk_force_disable(int num_consumers,
278                                         struct regulator_bulk_data *consumers)
279 {
280         return 0;
281 }
282
283 static inline void regulator_bulk_free(int num_consumers,
284                                        struct regulator_bulk_data *consumers)
285 {
286 }
287
288 static inline int regulator_set_voltage(struct regulator *regulator,
289                                         int min_uV, int max_uV)
290 {
291         return 0;
292 }
293
294 static inline int regulator_get_voltage(struct regulator *regulator)
295 {
296         return -EINVAL;
297 }
298
299 static inline int regulator_is_supported_voltage(struct regulator *regulator,
300                                    int min_uV, int max_uV)
301 {
302         return 0;
303 }
304
305 static inline int regulator_set_current_limit(struct regulator *regulator,
306                                              int min_uA, int max_uA)
307 {
308         return 0;
309 }
310
311 static inline int regulator_get_current_limit(struct regulator *regulator)
312 {
313         return 0;
314 }
315
316 static inline int regulator_set_mode(struct regulator *regulator,
317         unsigned int mode)
318 {
319         return 0;
320 }
321
322 static inline unsigned int regulator_get_mode(struct regulator *regulator)
323 {
324         return REGULATOR_MODE_NORMAL;
325 }
326
327 static inline int regulator_set_optimum_mode(struct regulator *regulator,
328                                         int load_uA)
329 {
330         return REGULATOR_MODE_NORMAL;
331 }
332
333 static inline int regulator_allow_bypass(struct regulator *regulator,
334                                          bool allow)
335 {
336         return 0;
337 }
338
339 static inline int regulator_register_notifier(struct regulator *regulator,
340                               struct notifier_block *nb)
341 {
342         return 0;
343 }
344
345 static inline int regulator_unregister_notifier(struct regulator *regulator,
346                                 struct notifier_block *nb)
347 {
348         return 0;
349 }
350
351 static inline void *regulator_get_drvdata(struct regulator *regulator)
352 {
353         return NULL;
354 }
355
356 static inline void regulator_set_drvdata(struct regulator *regulator,
357         void *data)
358 {
359 }
360
361 #endif
362
363 static inline int regulator_set_voltage_tol(struct regulator *regulator,
364                                             int new_uV, int tol_uV)
365 {
366         return regulator_set_voltage(regulator,
367                                      new_uV - tol_uV, new_uV + tol_uV);
368 }
369
370 #endif