]> git.kernelconcepts.de Git - karo-tx-linux.git/blob - init/main.c
init: scream bloody murder if interrupts are enabled too early
[karo-tx-linux.git] / init / main.c
1 /*
2  *  linux/init/main.c
3  *
4  *  Copyright (C) 1991, 1992  Linus Torvalds
5  *
6  *  GK 2/5/95  -  Changed to support mounting root fs via NFS
7  *  Added initrd & change_root: Werner Almesberger & Hans Lermen, Feb '96
8  *  Moan early if gcc is old, avoiding bogus kernels - Paul Gortmaker, May '96
9  *  Simplified starting of init:  Michael A. Griffith <grif@acm.org> 
10  */
11
12 #include <linux/types.h>
13 #include <linux/module.h>
14 #include <linux/proc_fs.h>
15 #include <linux/kernel.h>
16 #include <linux/syscalls.h>
17 #include <linux/stackprotector.h>
18 #include <linux/string.h>
19 #include <linux/ctype.h>
20 #include <linux/delay.h>
21 #include <linux/ioport.h>
22 #include <linux/init.h>
23 #include <linux/initrd.h>
24 #include <linux/bootmem.h>
25 #include <linux/acpi.h>
26 #include <linux/tty.h>
27 #include <linux/percpu.h>
28 #include <linux/kmod.h>
29 #include <linux/vmalloc.h>
30 #include <linux/kernel_stat.h>
31 #include <linux/start_kernel.h>
32 #include <linux/security.h>
33 #include <linux/smp.h>
34 #include <linux/profile.h>
35 #include <linux/rcupdate.h>
36 #include <linux/moduleparam.h>
37 #include <linux/kallsyms.h>
38 #include <linux/writeback.h>
39 #include <linux/cpu.h>
40 #include <linux/cpuset.h>
41 #include <linux/cgroup.h>
42 #include <linux/efi.h>
43 #include <linux/tick.h>
44 #include <linux/interrupt.h>
45 #include <linux/taskstats_kern.h>
46 #include <linux/delayacct.h>
47 #include <linux/unistd.h>
48 #include <linux/rmap.h>
49 #include <linux/mempolicy.h>
50 #include <linux/key.h>
51 #include <linux/buffer_head.h>
52 #include <linux/page_cgroup.h>
53 #include <linux/debug_locks.h>
54 #include <linux/debugobjects.h>
55 #include <linux/lockdep.h>
56 #include <linux/kmemleak.h>
57 #include <linux/pid_namespace.h>
58 #include <linux/device.h>
59 #include <linux/kthread.h>
60 #include <linux/sched.h>
61 #include <linux/signal.h>
62 #include <linux/idr.h>
63 #include <linux/kgdb.h>
64 #include <linux/ftrace.h>
65 #include <linux/async.h>
66 #include <linux/kmemcheck.h>
67 #include <linux/sfi.h>
68 #include <linux/shmem_fs.h>
69 #include <linux/slab.h>
70 #include <linux/perf_event.h>
71 #include <linux/file.h>
72 #include <linux/ptrace.h>
73 #include <linux/blkdev.h>
74 #include <linux/elevator.h>
75
76 #include <asm/io.h>
77 #include <asm/bugs.h>
78 #include <asm/setup.h>
79 #include <asm/sections.h>
80 #include <asm/cacheflush.h>
81
82 #ifdef CONFIG_X86_LOCAL_APIC
83 #include <asm/smp.h>
84 #endif
85
86 static int kernel_init(void *);
87
88 extern void init_IRQ(void);
89 extern void fork_init(unsigned long);
90 extern void mca_init(void);
91 extern void sbus_init(void);
92 extern void radix_tree_init(void);
93 #ifndef CONFIG_DEBUG_RODATA
94 static inline void mark_rodata_ro(void) { }
95 #endif
96
97 #ifdef CONFIG_TC
98 extern void tc_init(void);
99 #endif
100
101 /*
102  * Debug helper: via this flag we know that we are in 'early bootup code'
103  * where only the boot processor is running with IRQ disabled.  This means
104  * two things - IRQ must not be enabled before the flag is cleared and some
105  * operations which are not allowed with IRQ disabled are allowed while the
106  * flag is set.
107  */
108 bool early_boot_irqs_disabled __read_mostly;
109
110 enum system_states system_state __read_mostly;
111 EXPORT_SYMBOL(system_state);
112
113 /*
114  * Boot command-line arguments
115  */
116 #define MAX_INIT_ARGS CONFIG_INIT_ENV_ARG_LIMIT
117 #define MAX_INIT_ENVS CONFIG_INIT_ENV_ARG_LIMIT
118
119 extern void time_init(void);
120 /* Default late time init is NULL. archs can override this later. */
121 void (*__initdata late_time_init)(void);
122 extern void softirq_init(void);
123
124 /* Untouched command line saved by arch-specific code. */
125 char __initdata boot_command_line[COMMAND_LINE_SIZE];
126 /* Untouched saved command line (eg. for /proc) */
127 char *saved_command_line;
128 /* Command line for parameter parsing */
129 static char *static_command_line;
130
131 static char *execute_command;
132 static char *ramdisk_execute_command;
133
134 /*
135  * If set, this is an indication to the drivers that reset the underlying
136  * device before going ahead with the initialization otherwise driver might
137  * rely on the BIOS and skip the reset operation.
138  *
139  * This is useful if kernel is booting in an unreliable environment.
140  * For ex. kdump situaiton where previous kernel has crashed, BIOS has been
141  * skipped and devices will be in unknown state.
142  */
143 unsigned int reset_devices;
144 EXPORT_SYMBOL(reset_devices);
145
146 static int __init set_reset_devices(char *str)
147 {
148         reset_devices = 1;
149         return 1;
150 }
151
152 __setup("reset_devices", set_reset_devices);
153
154 static const char * argv_init[MAX_INIT_ARGS+2] = { "init", NULL, };
155 const char * envp_init[MAX_INIT_ENVS+2] = { "HOME=/", "TERM=linux", NULL, };
156 static const char *panic_later, *panic_param;
157
158 extern const struct obs_kernel_param __setup_start[], __setup_end[];
159
160 static int __init obsolete_checksetup(char *line)
161 {
162         const struct obs_kernel_param *p;
163         int had_early_param = 0;
164
165         p = __setup_start;
166         do {
167                 int n = strlen(p->str);
168                 if (parameqn(line, p->str, n)) {
169                         if (p->early) {
170                                 /* Already done in parse_early_param?
171                                  * (Needs exact match on param part).
172                                  * Keep iterating, as we can have early
173                                  * params and __setups of same names 8( */
174                                 if (line[n] == '\0' || line[n] == '=')
175                                         had_early_param = 1;
176                         } else if (!p->setup_func) {
177                                 printk(KERN_WARNING "Parameter %s is obsolete,"
178                                        " ignored\n", p->str);
179                                 return 1;
180                         } else if (p->setup_func(line + n))
181                                 return 1;
182                 }
183                 p++;
184         } while (p < __setup_end);
185
186         return had_early_param;
187 }
188
189 /*
190  * This should be approx 2 Bo*oMips to start (note initial shift), and will
191  * still work even if initially too large, it will just take slightly longer
192  */
193 unsigned long loops_per_jiffy = (1<<12);
194
195 EXPORT_SYMBOL(loops_per_jiffy);
196
197 static int __init debug_kernel(char *str)
198 {
199         console_loglevel = 10;
200         return 0;
201 }
202
203 static int __init quiet_kernel(char *str)
204 {
205         console_loglevel = 4;
206         return 0;
207 }
208
209 early_param("debug", debug_kernel);
210 early_param("quiet", quiet_kernel);
211
212 static int __init loglevel(char *str)
213 {
214         int newlevel;
215
216         /*
217          * Only update loglevel value when a correct setting was passed,
218          * to prevent blind crashes (when loglevel being set to 0) that
219          * are quite hard to debug
220          */
221         if (get_option(&str, &newlevel)) {
222                 console_loglevel = newlevel;
223                 return 0;
224         }
225
226         return -EINVAL;
227 }
228
229 early_param("loglevel", loglevel);
230
231 /* Change NUL term back to "=", to make "param" the whole string. */
232 static int __init repair_env_string(char *param, char *val, const char *unused)
233 {
234         if (val) {
235                 /* param=val or param="val"? */
236                 if (val == param+strlen(param)+1)
237                         val[-1] = '=';
238                 else if (val == param+strlen(param)+2) {
239                         val[-2] = '=';
240                         memmove(val-1, val, strlen(val)+1);
241                         val--;
242                 } else
243                         BUG();
244         }
245         return 0;
246 }
247
248 /*
249  * Unknown boot options get handed to init, unless they look like
250  * unused parameters (modprobe will find them in /proc/cmdline).
251  */
252 static int __init unknown_bootoption(char *param, char *val, const char *unused)
253 {
254         repair_env_string(param, val, unused);
255
256         /* Handle obsolete-style parameters */
257         if (obsolete_checksetup(param))
258                 return 0;
259
260         /* Unused module parameter. */
261         if (strchr(param, '.') && (!val || strchr(param, '.') < val))
262                 return 0;
263
264         if (panic_later)
265                 return 0;
266
267         if (val) {
268                 /* Environment option */
269                 unsigned int i;
270                 for (i = 0; envp_init[i]; i++) {
271                         if (i == MAX_INIT_ENVS) {
272                                 panic_later = "Too many boot env vars at `%s'";
273                                 panic_param = param;
274                         }
275                         if (!strncmp(param, envp_init[i], val - param))
276                                 break;
277                 }
278                 envp_init[i] = param;
279         } else {
280                 /* Command line option */
281                 unsigned int i;
282                 for (i = 0; argv_init[i]; i++) {
283                         if (i == MAX_INIT_ARGS) {
284                                 panic_later = "Too many boot init vars at `%s'";
285                                 panic_param = param;
286                         }
287                 }
288                 argv_init[i] = param;
289         }
290         return 0;
291 }
292
293 static int __init init_setup(char *str)
294 {
295         unsigned int i;
296
297         execute_command = str;
298         /*
299          * In case LILO is going to boot us with default command line,
300          * it prepends "auto" before the whole cmdline which makes
301          * the shell think it should execute a script with such name.
302          * So we ignore all arguments entered _before_ init=... [MJ]
303          */
304         for (i = 1; i < MAX_INIT_ARGS; i++)
305                 argv_init[i] = NULL;
306         return 1;
307 }
308 __setup("init=", init_setup);
309
310 static int __init rdinit_setup(char *str)
311 {
312         unsigned int i;
313
314         ramdisk_execute_command = str;
315         /* See "auto" comment in init_setup */
316         for (i = 1; i < MAX_INIT_ARGS; i++)
317                 argv_init[i] = NULL;
318         return 1;
319 }
320 __setup("rdinit=", rdinit_setup);
321
322 #ifndef CONFIG_SMP
323 static const unsigned int setup_max_cpus = NR_CPUS;
324 #ifdef CONFIG_X86_LOCAL_APIC
325 static void __init smp_init(void)
326 {
327         APIC_init_uniprocessor();
328 }
329 #else
330 #define smp_init()      do { } while (0)
331 #endif
332
333 static inline void setup_nr_cpu_ids(void) { }
334 static inline void smp_prepare_cpus(unsigned int maxcpus) { }
335 #endif
336
337 /*
338  * We need to store the untouched command line for future reference.
339  * We also need to store the touched command line since the parameter
340  * parsing is performed in place, and we should allow a component to
341  * store reference of name/value for future reference.
342  */
343 static void __init setup_command_line(char *command_line)
344 {
345         saved_command_line = alloc_bootmem(strlen (boot_command_line)+1);
346         static_command_line = alloc_bootmem(strlen (command_line)+1);
347         strcpy (saved_command_line, boot_command_line);
348         strcpy (static_command_line, command_line);
349 }
350
351 /*
352  * We need to finalize in a non-__init function or else race conditions
353  * between the root thread and the init thread may cause start_kernel to
354  * be reaped by free_initmem before the root thread has proceeded to
355  * cpu_idle.
356  *
357  * gcc-3.4 accidentally inlines this function, so use noinline.
358  */
359
360 static __initdata DECLARE_COMPLETION(kthreadd_done);
361
362 static noinline void __init_refok rest_init(void)
363 {
364         int pid;
365
366         rcu_scheduler_starting();
367         /*
368          * We need to spawn init first so that it obtains pid 1, however
369          * the init task will end up wanting to create kthreads, which, if
370          * we schedule it before we create kthreadd, will OOPS.
371          */
372         kernel_thread(kernel_init, NULL, CLONE_FS | CLONE_SIGHAND);
373         numa_default_policy();
374         pid = kernel_thread(kthreadd, NULL, CLONE_FS | CLONE_FILES);
375         rcu_read_lock();
376         kthreadd_task = find_task_by_pid_ns(pid, &init_pid_ns);
377         rcu_read_unlock();
378         complete(&kthreadd_done);
379
380         /*
381          * The boot idle thread must execute schedule()
382          * at least once to get things moving:
383          */
384         init_idle_bootup_task(current);
385         schedule_preempt_disabled();
386         /* Call into cpu_idle with preempt disabled */
387         cpu_idle();
388 }
389
390 /* Check for early params. */
391 static int __init do_early_param(char *param, char *val, const char *unused)
392 {
393         const struct obs_kernel_param *p;
394
395         for (p = __setup_start; p < __setup_end; p++) {
396                 if ((p->early && parameq(param, p->str)) ||
397                     (strcmp(param, "console") == 0 &&
398                      strcmp(p->str, "earlycon") == 0)
399                 ) {
400                         if (p->setup_func(val) != 0)
401                                 printk(KERN_WARNING
402                                        "Malformed early option '%s'\n", param);
403                 }
404         }
405         /* We accept everything at this stage. */
406         return 0;
407 }
408
409 void __init parse_early_options(char *cmdline)
410 {
411         parse_args("early options", cmdline, NULL, 0, 0, 0, do_early_param);
412 }
413
414 /* Arch code calls this early on, or if not, just before other parsing. */
415 void __init parse_early_param(void)
416 {
417         static __initdata int done = 0;
418         static __initdata char tmp_cmdline[COMMAND_LINE_SIZE];
419
420         if (done)
421                 return;
422
423         /* All fall through to do_early_param. */
424         strlcpy(tmp_cmdline, boot_command_line, COMMAND_LINE_SIZE);
425         parse_early_options(tmp_cmdline);
426         done = 1;
427 }
428
429 /*
430  *      Activate the first processor.
431  */
432
433 static void __init boot_cpu_init(void)
434 {
435         int cpu = smp_processor_id();
436         /* Mark the boot cpu "present", "online" etc for SMP and UP case */
437         set_cpu_online(cpu, true);
438         set_cpu_active(cpu, true);
439         set_cpu_present(cpu, true);
440         set_cpu_possible(cpu, true);
441 }
442
443 void __init __weak smp_setup_processor_id(void)
444 {
445 }
446
447 # if THREAD_SIZE >= PAGE_SIZE
448 void __init __weak thread_info_cache_init(void)
449 {
450 }
451 #endif
452
453 /*
454  * Set up kernel memory allocators
455  */
456 static void __init mm_init(void)
457 {
458         /*
459          * page_cgroup requires contiguous pages,
460          * bigger than MAX_ORDER unless SPARSEMEM.
461          */
462         page_cgroup_init_flatmem();
463         mem_init();
464         kmem_cache_init();
465         percpu_init_late();
466         pgtable_cache_init();
467         vmalloc_init();
468 }
469
470 asmlinkage void __init start_kernel(void)
471 {
472         char * command_line;
473         extern const struct kernel_param __start___param[], __stop___param[];
474
475         /*
476          * Need to run as early as possible, to initialize the
477          * lockdep hash:
478          */
479         lockdep_init();
480         smp_setup_processor_id();
481         debug_objects_early_init();
482
483         /*
484          * Set up the the initial canary ASAP:
485          */
486         boot_init_stack_canary();
487
488         cgroup_init_early();
489
490         local_irq_disable();
491         early_boot_irqs_disabled = true;
492
493 /*
494  * Interrupts are still disabled. Do necessary setups, then
495  * enable them
496  */
497         tick_init();
498         boot_cpu_init();
499         page_address_init();
500         printk(KERN_NOTICE "%s", linux_banner);
501         setup_arch(&command_line);
502         mm_init_owner(&init_mm, &init_task);
503         mm_init_cpumask(&init_mm);
504         setup_command_line(command_line);
505         setup_nr_cpu_ids();
506         setup_per_cpu_areas();
507         smp_prepare_boot_cpu(); /* arch-specific boot-cpu hooks */
508
509         build_all_zonelists(NULL, NULL);
510         page_alloc_init();
511
512         printk(KERN_NOTICE "Kernel command line: %s\n", boot_command_line);
513         parse_early_param();
514         parse_args("Booting kernel", static_command_line, __start___param,
515                    __stop___param - __start___param,
516                    -1, -1, &unknown_bootoption);
517
518         jump_label_init();
519
520         /*
521          * These use large bootmem allocations and must precede
522          * kmem_cache_init()
523          */
524         setup_log_buf(0);
525         pidhash_init();
526         vfs_caches_init_early();
527         sort_main_extable();
528         trap_init();
529         mm_init();
530
531         /*
532          * Set up the scheduler prior starting any interrupts (such as the
533          * timer interrupt). Full topology setup happens at smp_init()
534          * time - but meanwhile we still have a functioning scheduler.
535          */
536         sched_init();
537         /*
538          * Disable preemption - early bootup scheduling is extremely
539          * fragile until we cpu_idle() for the first time.
540          */
541         preempt_disable();
542         if (WARN(!irqs_disabled(), "Interrupts were enabled *very* early, fixing it\n"))
543                 local_irq_disable();
544         idr_init_cache();
545         perf_event_init();
546         rcu_init();
547         radix_tree_init();
548         /* init some links before init_ISA_irqs() */
549         early_irq_init();
550         init_IRQ();
551         init_timers();
552         hrtimers_init();
553         softirq_init();
554         timekeeping_init();
555         time_init();
556         profile_init();
557         call_function_init();
558         WARN(!irqs_disabled(), "Interrupts were enabled early\n");
559         early_boot_irqs_disabled = false;
560         local_irq_enable();
561
562         kmem_cache_init_late();
563
564         /*
565          * HACK ALERT! This is early. We're enabling the console before
566          * we've done PCI setups etc, and console_init() must be aware of
567          * this. But we do want output early, in case something goes wrong.
568          */
569         console_init();
570         if (panic_later)
571                 panic(panic_later, panic_param);
572
573         lockdep_info();
574
575         /*
576          * Need to run this when irqs are enabled, because it wants
577          * to self-test [hard/soft]-irqs on/off lock inversion bugs
578          * too:
579          */
580         locking_selftest();
581
582 #ifdef CONFIG_BLK_DEV_INITRD
583         if (initrd_start && !initrd_below_start_ok &&
584             page_to_pfn(virt_to_page((void *)initrd_start)) < min_low_pfn) {
585                 printk(KERN_CRIT "initrd overwritten (0x%08lx < 0x%08lx) - "
586                     "disabling it.\n",
587                     page_to_pfn(virt_to_page((void *)initrd_start)),
588                     min_low_pfn);
589                 initrd_start = 0;
590         }
591 #endif
592         page_cgroup_init();
593         debug_objects_mem_init();
594         kmemleak_init();
595         setup_per_cpu_pageset();
596         numa_policy_init();
597         if (late_time_init)
598                 late_time_init();
599         sched_clock_init();
600         calibrate_delay();
601         pidmap_init();
602         anon_vma_init();
603 #ifdef CONFIG_X86
604         if (efi_enabled(EFI_RUNTIME_SERVICES))
605                 efi_enter_virtual_mode();
606 #endif
607         thread_info_cache_init();
608         cred_init();
609         fork_init(totalram_pages);
610         proc_caches_init();
611         buffer_init();
612         key_init();
613         security_init();
614         dbg_late_init();
615         vfs_caches_init(totalram_pages);
616         signals_init();
617         /* rootfs populating might need page-writeback */
618         page_writeback_init();
619 #ifdef CONFIG_PROC_FS
620         proc_root_init();
621 #endif
622         cgroup_init();
623         cpuset_init();
624         taskstats_init_early();
625         delayacct_init();
626
627         check_bugs();
628
629         acpi_early_init(); /* before LAPIC and SMP init */
630         sfi_init_late();
631
632         if (efi_enabled(EFI_RUNTIME_SERVICES)) {
633                 efi_late_init();
634                 efi_free_boot_services();
635         }
636
637         ftrace_init();
638
639         /* Do the rest non-__init'ed, we're now alive */
640         rest_init();
641 }
642
643 /* Call all constructor functions linked into the kernel. */
644 static void __init do_ctors(void)
645 {
646 #ifdef CONFIG_CONSTRUCTORS
647         ctor_fn_t *fn = (ctor_fn_t *) __ctors_start;
648
649         for (; fn < (ctor_fn_t *) __ctors_end; fn++)
650                 (*fn)();
651 #endif
652 }
653
654 bool initcall_debug;
655 core_param(initcall_debug, initcall_debug, bool, 0644);
656
657 static char msgbuf[64];
658
659 static int __init_or_module do_one_initcall_debug(initcall_t fn)
660 {
661         ktime_t calltime, delta, rettime;
662         unsigned long long duration;
663         int ret;
664
665         printk(KERN_DEBUG "calling  %pF @ %i\n", fn, task_pid_nr(current));
666         calltime = ktime_get();
667         ret = fn();
668         rettime = ktime_get();
669         delta = ktime_sub(rettime, calltime);
670         duration = (unsigned long long) ktime_to_ns(delta) >> 10;
671         printk(KERN_DEBUG "initcall %pF returned %d after %lld usecs\n", fn,
672                 ret, duration);
673
674         return ret;
675 }
676
677 int __init_or_module do_one_initcall(initcall_t fn)
678 {
679         int count = preempt_count();
680         int ret;
681
682         if (initcall_debug)
683                 ret = do_one_initcall_debug(fn);
684         else
685                 ret = fn();
686
687         msgbuf[0] = 0;
688
689         if (ret && ret != -ENODEV && initcall_debug)
690                 sprintf(msgbuf, "error code %d ", ret);
691
692         if (preempt_count() != count) {
693                 strlcat(msgbuf, "preemption imbalance ", sizeof(msgbuf));
694                 preempt_count() = count;
695         }
696         if (irqs_disabled()) {
697                 strlcat(msgbuf, "disabled interrupts ", sizeof(msgbuf));
698                 local_irq_enable();
699         }
700         WARN(msgbuf[0], "initcall %pF returned with %s\n", fn, msgbuf);
701
702         return ret;
703 }
704
705
706 extern initcall_t __initcall_start[];
707 extern initcall_t __initcall0_start[];
708 extern initcall_t __initcall1_start[];
709 extern initcall_t __initcall2_start[];
710 extern initcall_t __initcall3_start[];
711 extern initcall_t __initcall4_start[];
712 extern initcall_t __initcall5_start[];
713 extern initcall_t __initcall6_start[];
714 extern initcall_t __initcall7_start[];
715 extern initcall_t __initcall_end[];
716
717 static initcall_t *initcall_levels[] __initdata = {
718         __initcall0_start,
719         __initcall1_start,
720         __initcall2_start,
721         __initcall3_start,
722         __initcall4_start,
723         __initcall5_start,
724         __initcall6_start,
725         __initcall7_start,
726         __initcall_end,
727 };
728
729 /* Keep these in sync with initcalls in include/linux/init.h */
730 static char *initcall_level_names[] __initdata = {
731         "early",
732         "core",
733         "postcore",
734         "arch",
735         "subsys",
736         "fs",
737         "device",
738         "late",
739 };
740
741 static void __init do_initcall_level(int level)
742 {
743         extern const struct kernel_param __start___param[], __stop___param[];
744         initcall_t *fn;
745
746         strcpy(static_command_line, saved_command_line);
747         parse_args(initcall_level_names[level],
748                    static_command_line, __start___param,
749                    __stop___param - __start___param,
750                    level, level,
751                    &repair_env_string);
752
753         for (fn = initcall_levels[level]; fn < initcall_levels[level+1]; fn++)
754                 do_one_initcall(*fn);
755 }
756
757 static void __init do_initcalls(void)
758 {
759         int level;
760
761         for (level = 0; level < ARRAY_SIZE(initcall_levels) - 1; level++)
762                 do_initcall_level(level);
763 }
764
765 /*
766  * Ok, the machine is now initialized. None of the devices
767  * have been touched yet, but the CPU subsystem is up and
768  * running, and memory and process management works.
769  *
770  * Now we can finally start doing some real work..
771  */
772 static void __init do_basic_setup(void)
773 {
774         cpuset_init_smp();
775         usermodehelper_init();
776         shmem_init();
777         driver_init();
778         init_irq_proc();
779         do_ctors();
780         usermodehelper_enable();
781         do_initcalls();
782 }
783
784 static void __init do_pre_smp_initcalls(void)
785 {
786         initcall_t *fn;
787
788         for (fn = __initcall_start; fn < __initcall0_start; fn++)
789                 do_one_initcall(*fn);
790 }
791
792 /*
793  * This function requests modules which should be loaded by default and is
794  * called twice right after initrd is mounted and right before init is
795  * exec'd.  If such modules are on either initrd or rootfs, they will be
796  * loaded before control is passed to userland.
797  */
798 void __init load_default_modules(void)
799 {
800         load_default_elevator_module();
801 }
802
803 static int run_init_process(const char *init_filename)
804 {
805         argv_init[0] = init_filename;
806         return do_execve(init_filename,
807                 (const char __user *const __user *)argv_init,
808                 (const char __user *const __user *)envp_init);
809 }
810
811 static noinline void __init kernel_init_freeable(void);
812
813 static int __ref kernel_init(void *unused)
814 {
815         kernel_init_freeable();
816         /* need to finish all async __init code before freeing the memory */
817         async_synchronize_full();
818         free_initmem();
819         mark_rodata_ro();
820         system_state = SYSTEM_RUNNING;
821         numa_default_policy();
822
823         flush_delayed_fput();
824
825         if (ramdisk_execute_command) {
826                 if (!run_init_process(ramdisk_execute_command))
827                         return 0;
828                 printk(KERN_WARNING "Failed to execute %s\n",
829                                 ramdisk_execute_command);
830         }
831
832         /*
833          * We try each of these until one succeeds.
834          *
835          * The Bourne shell can be used instead of init if we are
836          * trying to recover a really broken machine.
837          */
838         if (execute_command) {
839                 if (!run_init_process(execute_command))
840                         return 0;
841                 printk(KERN_WARNING "Failed to execute %s.  Attempting "
842                                         "defaults...\n", execute_command);
843         }
844         if (!run_init_process("/sbin/init") ||
845             !run_init_process("/etc/init") ||
846             !run_init_process("/bin/init") ||
847             !run_init_process("/bin/sh"))
848                 return 0;
849
850         panic("No init found.  Try passing init= option to kernel. "
851               "See Linux Documentation/init.txt for guidance.");
852 }
853
854 static noinline void __init kernel_init_freeable(void)
855 {
856         /*
857          * Wait until kthreadd is all set-up.
858          */
859         wait_for_completion(&kthreadd_done);
860
861         /* Now the scheduler is fully set up and can do blocking allocations */
862         gfp_allowed_mask = __GFP_BITS_MASK;
863
864         /*
865          * init can allocate pages on any node
866          */
867         set_mems_allowed(node_states[N_MEMORY]);
868         /*
869          * init can run on any cpu.
870          */
871         set_cpus_allowed_ptr(current, cpu_all_mask);
872
873         cad_pid = task_pid(current);
874
875         smp_prepare_cpus(setup_max_cpus);
876
877         do_pre_smp_initcalls();
878         lockup_detector_init();
879
880         smp_init();
881         sched_init_smp();
882
883         do_basic_setup();
884
885         /* Open the /dev/console on the rootfs, this should never fail */
886         if (sys_open((const char __user *) "/dev/console", O_RDWR, 0) < 0)
887                 printk(KERN_WARNING "Warning: unable to open an initial console.\n");
888
889         (void) sys_dup(0);
890         (void) sys_dup(0);
891         /*
892          * check if there is an early userspace init.  If yes, let it do all
893          * the work
894          */
895
896         if (!ramdisk_execute_command)
897                 ramdisk_execute_command = "/init";
898
899         if (sys_access((const char __user *) ramdisk_execute_command, 0) != 0) {
900                 ramdisk_execute_command = NULL;
901                 prepare_namespace();
902         }
903
904         /*
905          * Ok, we have completed the initial bootup, and
906          * we're essentially up and running. Get rid of the
907          * initmem segments and start the user-mode stuff..
908          */
909
910         /* rootfs is available now, try loading default modules */
911         load_default_modules();
912 }