ipc/sem.c: remove sem_base, embed struct sem

[karo-tx-linux.git] / ipc / sem.c

/*
 * linux/ipc/sem.c
 * Copyright (C) 1992 Krishna Balasubramanian
 * Copyright (C) 1995 Eric Schenk, Bruno Haible
 *
 * /proc/sysvipc/sem support (c) 1999 Dragos Acostachioaie <dragos@iname.com>
 *
 * SMP-threaded, sysctl's added
 * (c) 1999 Manfred Spraul <manfred@colorfullife.com>
 * Enforced range limit on SEM_UNDO
 * (c) 2001 Red Hat Inc
 * Lockless wakeup
 * (c) 2003 Manfred Spraul <manfred@colorfullife.com>
 * (c) 2016 Davidlohr Bueso <dave@stgolabs.net>
 * Further wakeup optimizations, documentation
 * (c) 2010 Manfred Spraul <manfred@colorfullife.com>
 *
 * support for audit of ipc object properties and permission changes
 * Dustin Kirkland <dustin.kirkland@us.ibm.com>
 *
 * namespaces support
 * OpenVZ, SWsoft Inc.
 * Pavel Emelianov <xemul@openvz.org>
 *
 * Implementation notes: (May 2010)
 * This file implements System V semaphores.
 *
 * User space visible behavior:
 * - FIFO ordering for semop() operations (just FIFO, not starvation
 *   protection)
 * - multiple semaphore operations that alter the same semaphore in
 *   one semop() are handled.
 * - sem_ctime (time of last semctl()) is updated in the IPC_SET, SETVAL and
 *   SETALL calls.
 * - two Linux specific semctl() commands: SEM_STAT, SEM_INFO.
 * - undo adjustments at process exit are limited to 0..SEMVMX.
 * - namespace are supported.
 * - SEMMSL, SEMMNS, SEMOPM and SEMMNI can be configured at runtine by writing
 *   to /proc/sys/kernel/sem.
 * - statistics about the usage are reported in /proc/sysvipc/sem.
 *
 * Internals:
 * - scalability:
 *   - all global variables are read-mostly.
 *   - semop() calls and semctl(RMID) are synchronized by RCU.
 *   - most operations do write operations (actually: spin_lock calls) to
 *     the per-semaphore array structure.
 *   Thus: Perfect SMP scaling between independent semaphore arrays.
 *         If multiple semaphores in one array are used, then cache line
 *         trashing on the semaphore array spinlock will limit the scaling.
 * - semncnt and semzcnt are calculated on demand in count_semcnt()
 * - the task that performs a successful semop() scans the list of all
 *   sleeping tasks and completes any pending operations that can be fulfilled.
 *   Semaphores are actively given to waiting tasks (necessary for FIFO).
 *   (see update_queue())
 * - To improve the scalability, the actual wake-up calls are performed after
 *   dropping all locks. (see wake_up_sem_queue_prepare())
 * - All work is done by the waker, the woken up task does not have to do
 *   anything - not even acquiring a lock or dropping a refcount.
 * - A woken up task may not even touch the semaphore array anymore, it may
 *   have been destroyed already by a semctl(RMID).
 * - UNDO values are stored in an array (one per process and per
 *   semaphore array, lazily allocated). For backwards compatibility, multiple
 *   modes for the UNDO variables are supported (per process, per thread)
 *   (see copy_semundo, CLONE_SYSVSEM)
 * - There are two lists of the pending operations: a per-array list
 *   and per-semaphore list (stored in the array). This allows to achieve FIFO
 *   ordering without always scanning all pending operations.
 *   The worst-case behavior is nevertheless O(N^2) for N wakeups.
 */

#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
#include <linux/time.h>
#include <linux/security.h>
#include <linux/syscalls.h>
#include <linux/audit.h>
#include <linux/capability.h>
#include <linux/seq_file.h>
#include <linux/rwsem.h>
#include <linux/nsproxy.h>
#include <linux/ipc_namespace.h>
#include <linux/sched/wake_q.h>

#include <linux/uaccess.h>
#include "util.h"


/* One queue for each sleeping process in the system. */
struct sem_queue {
        struct list_head        list;    /* queue of pending operations */
        struct task_struct      *sleeper; /* this process */
        struct sem_undo         *undo;   /* undo structure */
        int                     pid;     /* process id of requesting process */
        int                     status;  /* completion status of operation */
        struct sembuf           *sops;   /* array of pending operations */
        struct sembuf           *blocking; /* the operation that blocked */
        int                     nsops;   /* number of operations */
        bool                    alter;   /* does *sops alter the array? */
        bool                    dupsop;  /* sops on more than one sem_num */
};

/* Each task has a list of undo requests. They are executed automatically
 * when the process exits.
 */
struct sem_undo {
        struct list_head        list_proc;      /* per-process list: *
                                                 * all undos from one process
                                                 * rcu protected */
        struct rcu_head         rcu;            /* rcu struct for sem_undo */
        struct sem_undo_list    *ulp;           /* back ptr to sem_undo_list */
        struct list_head        list_id;        /* per semaphore array list:
                                                 * all undos for one array */
        int                     semid;          /* semaphore set identifier */
        short                   *semadj;        /* array of adjustments */
                                                /* one per semaphore */
};

/* sem_undo_list controls shared access to the list of sem_undo structures
 * that may be shared among all a CLONE_SYSVSEM task group.
 */
struct sem_undo_list {
        atomic_t                refcnt;
        spinlock_t              lock;
        struct list_head        list_proc;
};


#define sem_ids(ns)     ((ns)->ids[IPC_SEM_IDS])

#define sem_checkid(sma, semid) ipc_checkid(&sma->sem_perm, semid)

static int newary(struct ipc_namespace *, struct ipc_params *);
static void freeary(struct ipc_namespace *, struct kern_ipc_perm *);
#ifdef CONFIG_PROC_FS
static int sysvipc_sem_proc_show(struct seq_file *s, void *it);
#endif

#define SEMMSL_FAST     256 /* 512 bytes on stack */
#define SEMOPM_FAST     64  /* ~ 372 bytes on stack */

/*
 * Switching from the mode suitable for simple ops
 * to the mode for complex ops is costly. Therefore:
 * use some hysteresis
 */
#define USE_GLOBAL_LOCK_HYSTERESIS      10

/*
 * Locking:
 * a) global sem_lock() for read/write
 *      sem_undo.id_next,
 *      sem_array.complex_count,
 *      sem_array.pending{_alter,_const},
 *      sem_array.sem_undo
 *
 * b) global or semaphore sem_lock() for read/write:
 *      sem_array.sems[i].pending_{const,alter}:
 *
 * c) special:
 *      sem_undo_list.list_proc:
 *      * undo_list->lock for write
 *      * rcu for read
 *      use_global_lock:
 *      * global sem_lock() for write
 *      * either local or global sem_lock() for read.
 *
 * Memory ordering:
 * Most ordering is enforced by using spin_lock() and spin_unlock().
 * The special case is use_global_lock:
 * Setting it from non-zero to 0 is a RELEASE, this is ensured by
 * using smp_store_release().
 * Testing if it is non-zero is an ACQUIRE, this is ensured by using
 * smp_load_acquire().
 * Setting it from 0 to non-zero must be ordered with regards to
 * this smp_load_acquire(), this is guaranteed because the smp_load_acquire()
 * is inside a spin_lock() and after a write from 0 to non-zero a
 * spin_lock()+spin_unlock() is done.
 */

#define sc_semmsl       sem_ctls[0]
#define sc_semmns       sem_ctls[1]
#define sc_semopm       sem_ctls[2]
#define sc_semmni       sem_ctls[3]

void sem_init_ns(struct ipc_namespace *ns)
{
        ns->sc_semmsl = SEMMSL;
        ns->sc_semmns = SEMMNS;
        ns->sc_semopm = SEMOPM;
        ns->sc_semmni = SEMMNI;
        ns->used_sems = 0;
        ipc_init_ids(&ns->ids[IPC_SEM_IDS]);
}

#ifdef CONFIG_IPC_NS
void sem_exit_ns(struct ipc_namespace *ns)
{
        free_ipcs(ns, &sem_ids(ns), freeary);
        idr_destroy(&ns->ids[IPC_SEM_IDS].ipcs_idr);
}
#endif

void __init sem_init(void)
{
        sem_init_ns(&init_ipc_ns);
        ipc_init_proc_interface("sysvipc/sem",
                                "       key      semid perms      nsems   uid   gid  cuid  cgid      otime      ctime\n",
                                IPC_SEM_IDS, sysvipc_sem_proc_show);
}

/**
 * unmerge_queues - unmerge queues, if possible.
 * @sma: semaphore array
 *
 * The function unmerges the wait queues if complex_count is 0.
 * It must be called prior to dropping the global semaphore array lock.
 */
static void unmerge_queues(struct sem_array *sma)
{
        struct sem_queue *q, *tq;

        /* complex operations still around? */
        if (sma->complex_count)
                return;
        /*
         * We will switch back to simple mode.
         * Move all pending operation back into the per-semaphore
         * queues.
         */
        list_for_each_entry_safe(q, tq, &sma->pending_alter, list) {
                struct sem *curr;
                curr = &sma->sems[q->sops[0].sem_num];

                list_add_tail(&q->list, &curr->pending_alter);
        }
        INIT_LIST_HEAD(&sma->pending_alter);
}

/**
 * merge_queues - merge single semop queues into global queue
 * @sma: semaphore array
 *
 * This function merges all per-semaphore queues into the global queue.
 * It is necessary to achieve FIFO ordering for the pending single-sop
 * operations when a multi-semop operation must sleep.
 * Only the alter operations must be moved, the const operations can stay.
 */
static void merge_queues(struct sem_array *sma)
{
        int i;
        for (i = 0; i < sma->sem_nsems; i++) {
                struct sem *sem = &sma->sems[i];

                list_splice_init(&sem->pending_alter, &sma->pending_alter);
        }
}

static void sem_rcu_free(struct rcu_head *head)
{
        struct ipc_rcu *p = container_of(head, struct ipc_rcu, rcu);
        struct sem_array *sma = ipc_rcu_to_struct(p);

        security_sem_free(sma);
        ipc_rcu_free(head);
}

/*
 * Enter the mode suitable for non-simple operations:
 * Caller must own sem_perm.lock.
 */
static void complexmode_enter(struct sem_array *sma)
{
        int i;
        struct sem *sem;

        if (sma->use_global_lock > 0)  {
                /*
                 * We are already in global lock mode.
                 * Nothing to do, just reset the
                 * counter until we return to simple mode.
                 */
                sma->use_global_lock = USE_GLOBAL_LOCK_HYSTERESIS;
                return;
        }
        sma->use_global_lock = USE_GLOBAL_LOCK_HYSTERESIS;

        for (i = 0; i < sma->sem_nsems; i++) {
                sem = &sma->sems[i];
                spin_lock(&sem->lock);
                spin_unlock(&sem->lock);
        }
}

/*
 * Try to leave the mode that disallows simple operations:
 * Caller must own sem_perm.lock.
 */
static void complexmode_tryleave(struct sem_array *sma)
{
        if (sma->complex_count)  {
                /* Complex ops are sleeping.
                 * We must stay in complex mode
                 */
                return;
        }
        if (sma->use_global_lock == 1) {
                /*
                 * Immediately after setting use_global_lock to 0,
                 * a simple op can start. Thus: all memory writes
                 * performed by the current operation must be visible
                 * before we set use_global_lock to 0.
                 */
                smp_store_release(&sma->use_global_lock, 0);
        } else {
                sma->use_global_lock--;
        }
}

#define SEM_GLOBAL_LOCK (-1)
/*
 * If the request contains only one semaphore operation, and there are
 * no complex transactions pending, lock only the semaphore involved.
 * Otherwise, lock the entire semaphore array, since we either have
 * multiple semaphores in our own semops, or we need to look at
 * semaphores from other pending complex operations.
 */
static inline int sem_lock(struct sem_array *sma, struct sembuf *sops,
                              int nsops)
{
        struct sem *sem;

        if (nsops != 1) {
                /* Complex operation - acquire a full lock */
                ipc_lock_object(&sma->sem_perm);

                /* Prevent parallel simple ops */
                complexmode_enter(sma);
                return SEM_GLOBAL_LOCK;
        }

        /*
         * Only one semaphore affected - try to optimize locking.
         * Optimized locking is possible if no complex operation
         * is either enqueued or processed right now.
         *
         * Both facts are tracked by use_global_mode.
         */
        sem = &sma->sems[sops->sem_num];

        /*
         * Initial check for use_global_lock. Just an optimization,
         * no locking, no memory barrier.
         */
        if (!sma->use_global_lock) {
                /*
                 * It appears that no complex operation is around.
                 * Acquire the per-semaphore lock.
                 */
                spin_lock(&sem->lock);

                /* pairs with smp_store_release() */
                if (!smp_load_acquire(&sma->use_global_lock)) {
                        /* fast path successful! */
                        return sops->sem_num;
                }
                spin_unlock(&sem->lock);
        }

        /* slow path: acquire the full lock */
        ipc_lock_object(&sma->sem_perm);

        if (sma->use_global_lock == 0) {
                /*
                 * The use_global_lock mode ended while we waited for
                 * sma->sem_perm.lock. Thus we must switch to locking
                 * with sem->lock.
                 * Unlike in the fast path, there is no need to recheck
                 * sma->use_global_lock after we have acquired sem->lock:
                 * We own sma->sem_perm.lock, thus use_global_lock cannot
                 * change.
                 */
                spin_lock(&sem->lock);

                ipc_unlock_object(&sma->sem_perm);
                return sops->sem_num;
        } else {
                /*
                 * Not a false alarm, thus continue to use the global lock
                 * mode. No need for complexmode_enter(), this was done by
                 * the caller that has set use_global_mode to non-zero.
                 */
                return SEM_GLOBAL_LOCK;
        }
}

static inline void sem_unlock(struct sem_array *sma, int locknum)
{
        if (locknum == SEM_GLOBAL_LOCK) {
                unmerge_queues(sma);
                complexmode_tryleave(sma);
                ipc_unlock_object(&sma->sem_perm);
        } else {
                struct sem *sem = &sma->sems[locknum];
                spin_unlock(&sem->lock);
        }
}

/*
 * sem_lock_(check_) routines are called in the paths where the rwsem
 * is not held.
 *
 * The caller holds the RCU read lock.
 */
static inline struct sem_array *sem_obtain_object(struct ipc_namespace *ns, int id)
{
        struct kern_ipc_perm *ipcp = ipc_obtain_object_idr(&sem_ids(ns), id);

        if (IS_ERR(ipcp))
                return ERR_CAST(ipcp);

        return container_of(ipcp, struct sem_array, sem_perm);
}

static inline struct sem_array *sem_obtain_object_check(struct ipc_namespace *ns,
                                                        int id)
{
        struct kern_ipc_perm *ipcp = ipc_obtain_object_check(&sem_ids(ns), id);

        if (IS_ERR(ipcp))
                return ERR_CAST(ipcp);

        return container_of(ipcp, struct sem_array, sem_perm);
}

static inline void sem_lock_and_putref(struct sem_array *sma)
{
        sem_lock(sma, NULL, -1);
        ipc_rcu_putref(sma, sem_rcu_free);
}

static inline void sem_rmid(struct ipc_namespace *ns, struct sem_array *s)
{
        ipc_rmid(&sem_ids(ns), &s->sem_perm);
}

/**
 * newary - Create a new semaphore set
 * @ns: namespace
 * @params: ptr to the structure that contains key, semflg and nsems
 *
 * Called with sem_ids.rwsem held (as a writer)
 */
static int newary(struct ipc_namespace *ns, struct ipc_params *params)
{
        int id;
        int retval;
        struct sem_array *sma;
        int size;
        key_t key = params->key;
        int nsems = params->u.nsems;
        int semflg = params->flg;
        int i;

        if (!nsems)
                return -EINVAL;
        if (ns->used_sems + nsems > ns->sc_semmns)
                return -ENOSPC;

        size = sizeof(*sma) + nsems * sizeof(sma->sems[0]);
        sma = ipc_rcu_alloc(size);
        if (!sma)
                return -ENOMEM;

        memset(sma, 0, size);

        sma->sem_perm.mode = (semflg & S_IRWXUGO);
        sma->sem_perm.key = key;

        sma->sem_perm.security = NULL;
        retval = security_sem_alloc(sma);
        if (retval) {
                ipc_rcu_putref(sma, ipc_rcu_free);
                return retval;
        }

        for (i = 0; i < nsems; i++) {
                INIT_LIST_HEAD(&sma->sems[i].pending_alter);
                INIT_LIST_HEAD(&sma->sems[i].pending_const);
                spin_lock_init(&sma->sems[i].lock);
        }

        sma->complex_count = 0;
        sma->use_global_lock = USE_GLOBAL_LOCK_HYSTERESIS;
        INIT_LIST_HEAD(&sma->pending_alter);
        INIT_LIST_HEAD(&sma->pending_const);
        INIT_LIST_HEAD(&sma->list_id);
        sma->sem_nsems = nsems;
        sma->sem_ctime = get_seconds();

        id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
        if (id < 0) {
                ipc_rcu_putref(sma, sem_rcu_free);
                return id;
        }
        ns->used_sems += nsems;

        sem_unlock(sma, -1);
        rcu_read_unlock();

        return sma->sem_perm.id;
}


/*
 * Called with sem_ids.rwsem and ipcp locked.
 */
static inline int sem_security(struct kern_ipc_perm *ipcp, int semflg)
{
        struct sem_array *sma;

        sma = container_of(ipcp, struct sem_array, sem_perm);
        return security_sem_associate(sma, semflg);
}

/*
 * Called with sem_ids.rwsem and ipcp locked.
 */
static inline int sem_more_checks(struct kern_ipc_perm *ipcp,
                                struct ipc_params *params)
{
        struct sem_array *sma;

        sma = container_of(ipcp, struct sem_array, sem_perm);
        if (params->u.nsems > sma->sem_nsems)
                return -EINVAL;

        return 0;
}

SYSCALL_DEFINE3(semget, key_t, key, int, nsems, int, semflg)
{
        struct ipc_namespace *ns;
        static const struct ipc_ops sem_ops = {
                .getnew = newary,
                .associate = sem_security,
                .more_checks = sem_more_checks,
        };
        struct ipc_params sem_params;

        ns = current->nsproxy->ipc_ns;

        if (nsems < 0 || nsems > ns->sc_semmsl)
                return -EINVAL;

        sem_params.key = key;
        sem_params.flg = semflg;
        sem_params.u.nsems = nsems;

        return ipcget(ns, &sem_ids(ns), &sem_ops, &sem_params);
}

/**
 * perform_atomic_semop[_slow] - Attempt to perform semaphore
 *                               operations on a given array.
 * @sma: semaphore array
 * @q: struct sem_queue that describes the operation
 *
 * Caller blocking are as follows, based the value
 * indicated by the semaphore operation (sem_op):
 *
 *  (1) >0 never blocks.
 *  (2)  0 (wait-for-zero operation): semval is non-zero.
 *  (3) <0 attempting to decrement semval to a value smaller than zero.
 *
 * Returns 0 if the operation was possible.
 * Returns 1 if the operation is impossible, the caller must sleep.
 * Returns <0 for error codes.
 */
static int perform_atomic_semop_slow(struct sem_array *sma, struct sem_queue *q)
{
        int result, sem_op, nsops, pid;
        struct sembuf *sop;
        struct sem *curr;
        struct sembuf *sops;
        struct sem_undo *un;

        sops = q->sops;
        nsops = q->nsops;
        un = q->undo;

        for (sop = sops; sop < sops + nsops; sop++) {
                curr = &sma->sems[sop->sem_num];
                sem_op = sop->sem_op;
                result = curr->semval;

                if (!sem_op && result)
                        goto would_block;

                result += sem_op;
                if (result < 0)
                        goto would_block;
                if (result > SEMVMX)
                        goto out_of_range;

                if (sop->sem_flg & SEM_UNDO) {
                        int undo = un->semadj[sop->sem_num] - sem_op;
                        /* Exceeding the undo range is an error. */
                        if (undo < (-SEMAEM - 1) || undo > SEMAEM)
                                goto out_of_range;
                        un->semadj[sop->sem_num] = undo;
                }

                curr->semval = result;
        }

        sop--;
        pid = q->pid;
        while (sop >= sops) {
                sma->sems[sop->sem_num].sempid = pid;
                sop--;
        }

        return 0;

out_of_range:
        result = -ERANGE;
        goto undo;

would_block:
        q->blocking = sop;

        if (sop->sem_flg & IPC_NOWAIT)
                result = -EAGAIN;
        else
                result = 1;

undo:
        sop--;
        while (sop >= sops) {
                sem_op = sop->sem_op;
                sma->sems[sop->sem_num].semval -= sem_op;
                if (sop->sem_flg & SEM_UNDO)
                        un->semadj[sop->sem_num] += sem_op;
                sop--;
        }

        return result;
}

static int perform_atomic_semop(struct sem_array *sma, struct sem_queue *q)
{
        int result, sem_op, nsops;
        struct sembuf *sop;
        struct sem *curr;
        struct sembuf *sops;
        struct sem_undo *un;

        sops = q->sops;
        nsops = q->nsops;
        un = q->undo;

        if (unlikely(q->dupsop))
                return perform_atomic_semop_slow(sma, q);

        /*
         * We scan the semaphore set twice, first to ensure that the entire
         * operation can succeed, therefore avoiding any pointless writes
         * to shared memory and having to undo such changes in order to block
         * until the operations can go through.
         */
        for (sop = sops; sop < sops + nsops; sop++) {
                curr = &sma->sems[sop->sem_num];
                sem_op = sop->sem_op;
                result = curr->semval;

                if (!sem_op && result)
                        goto would_block; /* wait-for-zero */

                result += sem_op;
                if (result < 0)
                        goto would_block;

                if (result > SEMVMX)
                        return -ERANGE;

                if (sop->sem_flg & SEM_UNDO) {
                        int undo = un->semadj[sop->sem_num] - sem_op;

                        /* Exceeding the undo range is an error. */
                        if (undo < (-SEMAEM - 1) || undo > SEMAEM)
                                return -ERANGE;
                }
        }

        for (sop = sops; sop < sops + nsops; sop++) {
                curr = &sma->sems[sop->sem_num];
                sem_op = sop->sem_op;
                result = curr->semval;

                if (sop->sem_flg & SEM_UNDO) {
                        int undo = un->semadj[sop->sem_num] - sem_op;

                        un->semadj[sop->sem_num] = undo;
                }
                curr->semval += sem_op;
                curr->sempid = q->pid;
        }

        return 0;

would_block:
        q->blocking = sop;
        return sop->sem_flg & IPC_NOWAIT ? -EAGAIN : 1;
}

static inline void wake_up_sem_queue_prepare(struct sem_queue *q, int error,
                                             struct wake_q_head *wake_q)
{
        wake_q_add(wake_q, q->sleeper);
        /*
         * Rely on the above implicit barrier, such that we can
         * ensure that we hold reference to the task before setting
         * q->status. Otherwise we could race with do_exit if the
         * task is awoken by an external event before calling
         * wake_up_process().
         */
        WRITE_ONCE(q->status, error);
}

static void unlink_queue(struct sem_array *sma, struct sem_queue *q)
{
        list_del(&q->list);
        if (q->nsops > 1)
                sma->complex_count--;
}

/** check_restart(sma, q)
 * @sma: semaphore array
 * @q: the operation that just completed
 *
 * update_queue is O(N^2) when it restarts scanning the whole queue of
 * waiting operations. Therefore this function checks if the restart is
 * really necessary. It is called after a previously waiting operation
 * modified the array.
 * Note that wait-for-zero operations are handled without restart.
 */
static inline int check_restart(struct sem_array *sma, struct sem_queue *q)
{
        /* pending complex alter operations are too difficult to analyse */
        if (!list_empty(&sma->pending_alter))
                return 1;

        /* we were a sleeping complex operation. Too difficult */
        if (q->nsops > 1)
                return 1;

        /* It is impossible that someone waits for the new value:
         * - complex operations always restart.
         * - wait-for-zero are handled seperately.
         * - q is a previously sleeping simple operation that
         *   altered the array. It must be a decrement, because
         *   simple increments never sleep.
         * - If there are older (higher priority) decrements
         *   in the queue, then they have observed the original
         *   semval value and couldn't proceed. The operation
         *   decremented to value - thus they won't proceed either.
         */
        return 0;
}

/**
 * wake_const_ops - wake up non-alter tasks
 * @sma: semaphore array.
 * @semnum: semaphore that was modified.
 * @wake_q: lockless wake-queue head.
 *
 * wake_const_ops must be called after a semaphore in a semaphore array
 * was set to 0. If complex const operations are pending, wake_const_ops must
 * be called with semnum = -1, as well as with the number of each modified
 * semaphore.
 * The tasks that must be woken up are added to @wake_q. The return code
 * is stored in q->pid.
 * The function returns 1 if at least one operation was completed successfully.
 */
static int wake_const_ops(struct sem_array *sma, int semnum,
                          struct wake_q_head *wake_q)
{
        struct sem_queue *q, *tmp;
        struct list_head *pending_list;
        int semop_completed = 0;

        if (semnum == -1)
                pending_list = &sma->pending_const;
        else
                pending_list = &sma->sems[semnum].pending_const;

        list_for_each_entry_safe(q, tmp, pending_list, list) {
                int error = perform_atomic_semop(sma, q);

                if (error > 0)
                        continue;
                /* operation completed, remove from queue & wakeup */
                unlink_queue(sma, q);

                wake_up_sem_queue_prepare(q, error, wake_q);
                if (error == 0)
                        semop_completed = 1;
        }

        return semop_completed;
}

/**
 * do_smart_wakeup_zero - wakeup all wait for zero tasks
 * @sma: semaphore array
 * @sops: operations that were performed
 * @nsops: number of operations
 * @wake_q: lockless wake-queue head
 *
 * Checks all required queue for wait-for-zero operations, based
 * on the actual changes that were performed on the semaphore array.
 * The function returns 1 if at least one operation was completed successfully.
 */
static int do_smart_wakeup_zero(struct sem_array *sma, struct sembuf *sops,
                                int nsops, struct wake_q_head *wake_q)
{
        int i;
        int semop_completed = 0;
        int got_zero = 0;

        /* first: the per-semaphore queues, if known */
        if (sops) {
                for (i = 0; i < nsops; i++) {
                        int num = sops[i].sem_num;

                        if (sma->sems[num].semval == 0) {
                                got_zero = 1;
                                semop_completed |= wake_const_ops(sma, num, wake_q);
                        }
                }
        } else {
                /*
                 * No sops means modified semaphores not known.
                 * Assume all were changed.
                 */
                for (i = 0; i < sma->sem_nsems; i++) {
                        if (sma->sems[i].semval == 0) {
                                got_zero = 1;
                                semop_completed |= wake_const_ops(sma, i, wake_q);
                        }
                }
        }
        /*
         * If one of the modified semaphores got 0,
         * then check the global queue, too.
         */
        if (got_zero)
                semop_completed |= wake_const_ops(sma, -1, wake_q);

        return semop_completed;
}


/**
 * update_queue - look for tasks that can be completed.
 * @sma: semaphore array.
 * @semnum: semaphore that was modified.
 * @wake_q: lockless wake-queue head.
 *
 * update_queue must be called after a semaphore in a semaphore array
 * was modified. If multiple semaphores were modified, update_queue must
 * be called with semnum = -1, as well as with the number of each modified
 * semaphore.
 * The tasks that must be woken up are added to @wake_q. The return code
 * is stored in q->pid.
 * The function internally checks if const operations can now succeed.
 *
 * The function return 1 if at least one semop was completed successfully.
 */
static int update_queue(struct sem_array *sma, int semnum, struct wake_q_head *wake_q)
{
        struct sem_queue *q, *tmp;
        struct list_head *pending_list;
        int semop_completed = 0;

        if (semnum == -1)
                pending_list = &sma->pending_alter;
        else
                pending_list = &sma->sems[semnum].pending_alter;

again:
        list_for_each_entry_safe(q, tmp, pending_list, list) {
                int error, restart;

                /* If we are scanning the single sop, per-semaphore list of
                 * one semaphore and that semaphore is 0, then it is not
                 * necessary to scan further: simple increments
                 * that affect only one entry succeed immediately and cannot
                 * be in the  per semaphore pending queue, and decrements
                 * cannot be successful if the value is already 0.
                 */
                if (semnum != -1 && sma->sems[semnum].semval == 0)
                        break;

                error = perform_atomic_semop(sma, q);

                /* Does q->sleeper still need to sleep? */
                if (error > 0)
                        continue;

                unlink_queue(sma, q);

                if (error) {
                        restart = 0;
                } else {
                        semop_completed = 1;
                        do_smart_wakeup_zero(sma, q->sops, q->nsops, wake_q);
                        restart = check_restart(sma, q);
                }

                wake_up_sem_queue_prepare(q, error, wake_q);
                if (restart)
                        goto again;
        }
        return semop_completed;
}

/**
 * set_semotime - set sem_otime
 * @sma: semaphore array
 * @sops: operations that modified the array, may be NULL
 *
 * sem_otime is replicated to avoid cache line trashing.
 * This function sets one instance to the current time.
 */
static void set_semotime(struct sem_array *sma, struct sembuf *sops)
{
        if (sops == NULL) {
                sma->sems[0].sem_otime = get_seconds();
        } else {
                sma->sems[sops[0].sem_num].sem_otime =
                                                        get_seconds();
        }
}

/**
 * do_smart_update - optimized update_queue
 * @sma: semaphore array
 * @sops: operations that were performed
 * @nsops: number of operations
 * @otime: force setting otime
 * @wake_q: lockless wake-queue head
 *
 * do_smart_update() does the required calls to update_queue and wakeup_zero,
 * based on the actual changes that were performed on the semaphore array.
 * Note that the function does not do the actual wake-up: the caller is
 * responsible for calling wake_up_q().
 * It is safe to perform this call after dropping all locks.
 */
static void do_smart_update(struct sem_array *sma, struct sembuf *sops, int nsops,
                            int otime, struct wake_q_head *wake_q)
{
        int i;

        otime |= do_smart_wakeup_zero(sma, sops, nsops, wake_q);

        if (!list_empty(&sma->pending_alter)) {
                /* semaphore array uses the global queue - just process it. */
                otime |= update_queue(sma, -1, wake_q);
        } else {
                if (!sops) {
                        /*
                         * No sops, thus the modified semaphores are not
                         * known. Check all.
                         */
                        for (i = 0; i < sma->sem_nsems; i++)
                                otime |= update_queue(sma, i, wake_q);
                } else {
                        /*
                         * Check the semaphores that were increased:
                         * - No complex ops, thus all sleeping ops are
                         *   decrease.
                         * - if we decreased the value, then any sleeping
                         *   semaphore ops wont be able to run: If the
                         *   previous value was too small, then the new
                         *   value will be too small, too.
                         */
                        for (i = 0; i < nsops; i++) {
                                if (sops[i].sem_op > 0) {
                                        otime |= update_queue(sma,
                                                              sops[i].sem_num, wake_q);
                                }
                        }
                }
        }
        if (otime)
                set_semotime(sma, sops);
}

/*
 * check_qop: Test if a queued operation sleeps on the semaphore semnum
 */
static int check_qop(struct sem_array *sma, int semnum, struct sem_queue *q,
                        bool count_zero)
{
        struct sembuf *sop = q->blocking;

        /*
         * Linux always (since 0.99.10) reported a task as sleeping on all
         * semaphores. This violates SUS, therefore it was changed to the
         * standard compliant behavior.
         * Give the administrators a chance to notice that an application
         * might misbehave because it relies on the Linux behavior.
         */
        pr_info_once("semctl(GETNCNT/GETZCNT) is since 3.16 Single Unix Specification compliant.\n"
                        "The task %s (%d) triggered the difference, watch for misbehavior.\n",
                        current->comm, task_pid_nr(current));

        if (sop->sem_num != semnum)
                return 0;

        if (count_zero && sop->sem_op == 0)
                return 1;
        if (!count_zero && sop->sem_op < 0)
                return 1;

        return 0;
}

/* The following counts are associated to each semaphore:
 *   semncnt        number of tasks waiting on semval being nonzero
 *   semzcnt        number of tasks waiting on semval being zero
 *
 * Per definition, a task waits only on the semaphore of the first semop
 * that cannot proceed, even if additional operation would block, too.
 */
static int count_semcnt(struct sem_array *sma, ushort semnum,
                        bool count_zero)
{
        struct list_head *l;
        struct sem_queue *q;
        int semcnt;

        semcnt = 0;
        /* First: check the simple operations. They are easy to evaluate */
        if (count_zero)
                l = &sma->sems[semnum].pending_const;
        else
                l = &sma->sems[semnum].pending_alter;

        list_for_each_entry(q, l, list) {
                /* all task on a per-semaphore list sleep on exactly
                 * that semaphore
                 */
                semcnt++;
        }

        /* Then: check the complex operations. */
        list_for_each_entry(q, &sma->pending_alter, list) {
                semcnt += check_qop(sma, semnum, q, count_zero);
        }
        if (count_zero) {
                list_for_each_entry(q, &sma->pending_const, list) {
                        semcnt += check_qop(sma, semnum, q, count_zero);
                }
        }
        return semcnt;
}

/* Free a semaphore set. freeary() is called with sem_ids.rwsem locked
 * as a writer and the spinlock for this semaphore set hold. sem_ids.rwsem
 * remains locked on exit.
 */
static void freeary(struct ipc_namespace *ns, struct kern_ipc_perm *ipcp)
{
        struct sem_undo *un, *tu;
        struct sem_queue *q, *tq;
        struct sem_array *sma = container_of(ipcp, struct sem_array, sem_perm);
        int i;
        DEFINE_WAKE_Q(wake_q);

        /* Free the existing undo structures for this semaphore set.  */
        ipc_assert_locked_object(&sma->sem_perm);
        list_for_each_entry_safe(un, tu, &sma->list_id, list_id) {
                list_del(&un->list_id);
                spin_lock(&un->ulp->lock);
                un->semid = -1;
                list_del_rcu(&un->list_proc);
                spin_unlock(&un->ulp->lock);
                kfree_rcu(un, rcu);
        }

        /* Wake up all pending processes and let them fail with EIDRM. */
        list_for_each_entry_safe(q, tq, &sma->pending_const, list) {
                unlink_queue(sma, q);
                wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
        }

        list_for_each_entry_safe(q, tq, &sma->pending_alter, list) {
                unlink_queue(sma, q);
                wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
        }
        for (i = 0; i < sma->sem_nsems; i++) {
                struct sem *sem = &sma->sems[i];
                list_for_each_entry_safe(q, tq, &sem->pending_const, list) {
                        unlink_queue(sma, q);
                        wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
                }
                list_for_each_entry_safe(q, tq, &sem->pending_alter, list) {
                        unlink_queue(sma, q);
                        wake_up_sem_queue_prepare(q, -EIDRM, &wake_q);
                }
        }

        /* Remove the semaphore set from the IDR */
        sem_rmid(ns, sma);
        sem_unlock(sma, -1);
        rcu_read_unlock();

        wake_up_q(&wake_q);
        ns->used_sems -= sma->sem_nsems;
        ipc_rcu_putref(sma, sem_rcu_free);
}

static unsigned long copy_semid_to_user(void __user *buf, struct semid64_ds *in, int version)
{
        switch (version) {
        case IPC_64:
                return copy_to_user(buf, in, sizeof(*in));
        case IPC_OLD:
            {
                struct semid_ds out;

                memset(&out, 0, sizeof(out));

                ipc64_perm_to_ipc_perm(&in->sem_perm, &out.sem_perm);

                out.sem_otime   = in->sem_otime;
                out.sem_ctime   = in->sem_ctime;
                out.sem_nsems   = in->sem_nsems;

                return copy_to_user(buf, &out, sizeof(out));
            }
        default:
                return -EINVAL;
        }
}

static time_t get_semotime(struct sem_array *sma)
{
        int i;
        time_t res;

        res = sma->sems[0].sem_otime;
        for (i = 1; i < sma->sem_nsems; i++) {
                time_t to = sma->sems[i].sem_otime;

                if (to > res)
                        res = to;
        }
        return res;
}

static int semctl_nolock(struct ipc_namespace *ns, int semid,
                         int cmd, int version, void __user *p)
{
        int err;
        struct sem_array *sma;

        switch (cmd) {
        case IPC_INFO:
        case SEM_INFO:
        {
                struct seminfo seminfo;
                int max_id;

                err = security_sem_semctl(NULL, cmd);
                if (err)
                        return err;

                memset(&seminfo, 0, sizeof(seminfo));
                seminfo.semmni = ns->sc_semmni;
                seminfo.semmns = ns->sc_semmns;
                seminfo.semmsl = ns->sc_semmsl;
                seminfo.semopm = ns->sc_semopm;
                seminfo.semvmx = SEMVMX;
                seminfo.semmnu = SEMMNU;
                seminfo.semmap = SEMMAP;
                seminfo.semume = SEMUME;
                down_read(&sem_ids(ns).rwsem);
                if (cmd == SEM_INFO) {
                        seminfo.semusz = sem_ids(ns).in_use;
                        seminfo.semaem = ns->used_sems;
                } else {
                        seminfo.semusz = SEMUSZ;
                        seminfo.semaem = SEMAEM;
                }
                max_id = ipc_get_maxid(&sem_ids(ns));
                up_read(&sem_ids(ns).rwsem);
                if (copy_to_user(p, &seminfo, sizeof(struct seminfo)))
                        return -EFAULT;
                return (max_id < 0) ? 0 : max_id;
        }
        case IPC_STAT:
        case SEM_STAT:
        {
                struct semid64_ds tbuf;
                int id = 0;

                memset(&tbuf, 0, sizeof(tbuf));

                rcu_read_lock();
                if (cmd == SEM_STAT) {
                        sma = sem_obtain_object(ns, semid);
                        if (IS_ERR(sma)) {
                                err = PTR_ERR(sma);
                                goto out_unlock;
                        }
                        id = sma->sem_perm.id;
                } else {
                        sma = sem_obtain_object_check(ns, semid);
                        if (IS_ERR(sma)) {
                                err = PTR_ERR(sma);
                                goto out_unlock;
                        }
                }

                err = -EACCES;
                if (ipcperms(ns, &sma->sem_perm, S_IRUGO))
                        goto out_unlock;

                err = security_sem_semctl(sma, cmd);
                if (err)
                        goto out_unlock;

                kernel_to_ipc64_perm(&sma->sem_perm, &tbuf.sem_perm);
                tbuf.sem_otime = get_semotime(sma);
                tbuf.sem_ctime = sma->sem_ctime;
                tbuf.sem_nsems = sma->sem_nsems;
                rcu_read_unlock();
                if (copy_semid_to_user(p, &tbuf, version))
                        return -EFAULT;
                return id;
        }
        default:
                return -EINVAL;
        }
out_unlock:
        rcu_read_unlock();
        return err;
}

static int semctl_setval(struct ipc_namespace *ns, int semid, int semnum,
                unsigned long arg)
{
        struct sem_undo *un;
        struct sem_array *sma;
        struct sem *curr;
        int err, val;
        DEFINE_WAKE_Q(wake_q);

#if defined(CONFIG_64BIT) && defined(__BIG_ENDIAN)
        /* big-endian 64bit */
        val = arg >> 32;
#else
        /* 32bit or little-endian 64bit */
        val = arg;
#endif

        if (val > SEMVMX || val < 0)
                return -ERANGE;

        rcu_read_lock();
        sma = sem_obtain_object_check(ns, semid);
        if (IS_ERR(sma)) {
                rcu_read_unlock();
                return PTR_ERR(sma);
        }

        if (semnum < 0 || semnum >= sma->sem_nsems) {
                rcu_read_unlock();
                return -EINVAL;
        }


        if (ipcperms(ns, &sma->sem_perm, S_IWUGO)) {
                rcu_read_unlock();
                return -EACCES;
        }

        err = security_sem_semctl(sma, SETVAL);
        if (err) {
                rcu_read_unlock();
                return -EACCES;
        }

        sem_lock(sma, NULL, -1);

        if (!ipc_valid_object(&sma->sem_perm)) {
                sem_unlock(sma, -1);
                rcu_read_unlock();
                return -EIDRM;
        }

        curr = &sma->sems[semnum];

        ipc_assert_locked_object(&sma->sem_perm);
        list_for_each_entry(un, &sma->list_id, list_id)
                un->semadj[semnum] = 0;

        curr->semval = val;
        curr->sempid = task_tgid_vnr(current);
        sma->sem_ctime = get_seconds();
        /* maybe some queued-up processes were waiting for this */
        do_smart_update(sma, NULL, 0, 0, &wake_q);
        sem_unlock(sma, -1);
        rcu_read_unlock();
        wake_up_q(&wake_q);
        return 0;
}

static int semctl_main(struct ipc_namespace *ns, int semid, int semnum,
                int cmd, void __user *p)
{
        struct sem_array *sma;
        struct sem *curr;
        int err, nsems;
        ushort fast_sem_io[SEMMSL_FAST];
        ushort *sem_io = fast_sem_io;
        DEFINE_WAKE_Q(wake_q);

        rcu_read_lock();
        sma = sem_obtain_object_check(ns, semid);
        if (IS_ERR(sma)) {
                rcu_read_unlock();
                return PTR_ERR(sma);
        }

        nsems = sma->sem_nsems;

        err = -EACCES;
        if (ipcperms(ns, &sma->sem_perm, cmd == SETALL ? S_IWUGO : S_IRUGO))
                goto out_rcu_wakeup;

        err = security_sem_semctl(sma, cmd);
        if (err)
                goto out_rcu_wakeup;

        err = -EACCES;
        switch (cmd) {
        case GETALL:
        {
                ushort __user *array = p;
                int i;

                sem_lock(sma, NULL, -1);
                if (!ipc_valid_object(&sma->sem_perm)) {
                        err = -EIDRM;
                        goto out_unlock;
                }
                if (nsems > SEMMSL_FAST) {
                        if (!ipc_rcu_getref(sma)) {
                                err = -EIDRM;
                                goto out_unlock;
                        }
                        sem_unlock(sma, -1);
                        rcu_read_unlock();
                        sem_io = ipc_alloc(sizeof(ushort)*nsems);
                        if (sem_io == NULL) {
                                ipc_rcu_putref(sma, sem_rcu_free);
                                return -ENOMEM;
                        }

                        rcu_read_lock();
                        sem_lock_and_putref(sma);
                        if (!ipc_valid_object(&sma->sem_perm)) {
                                err = -EIDRM;
                                goto out_unlock;
                        }
                }
                for (i = 0; i < sma->sem_nsems; i++)
                        sem_io[i] = sma->sems[i].semval;
                sem_unlock(sma, -1);
                rcu_read_unlock();
                err = 0;
                if (copy_to_user(array, sem_io, nsems*sizeof(ushort)))
                        err = -EFAULT;
                goto out_free;
        }
        case SETALL:
        {
                int i;
                struct sem_undo *un;

                if (!ipc_rcu_getref(sma)) {
                        err = -EIDRM;
                        goto out_rcu_wakeup;
                }
                rcu_read_unlock();

                if (nsems > SEMMSL_FAST) {
                        sem_io = ipc_alloc(sizeof(ushort)*nsems);
                        if (sem_io == NULL) {
                                ipc_rcu_putref(sma, sem_rcu_free);
                                return -ENOMEM;
                        }
                }

                if (copy_from_user(sem_io, p, nsems*sizeof(ushort))) {
                        ipc_rcu_putref(sma, sem_rcu_free);
                        err = -EFAULT;
                        goto out_free;
                }

                for (i = 0; i < nsems; i++) {
                        if (sem_io[i] > SEMVMX) {
                                ipc_rcu_putref(sma, sem_rcu_free);
                                err = -ERANGE;
                                goto out_free;
                        }
                }
                rcu_read_lock();
                sem_lock_and_putref(sma);
                if (!ipc_valid_object(&sma->sem_perm)) {
                        err = -EIDRM;
                        goto out_unlock;
                }

                for (i = 0; i < nsems; i++) {
                        sma->sems[i].semval = sem_io[i];
                        sma->sems[i].sempid = task_tgid_vnr(current);
                }

                ipc_assert_locked_object(&sma->sem_perm);
                list_for_each_entry(un, &sma->list_id, list_id) {
                        for (i = 0; i < nsems; i++)
                                un->semadj[i] = 0;
                }
                sma->sem_ctime = get_seconds();
                /* maybe some queued-up processes were waiting for this */
                do_smart_update(sma, NULL, 0, 0, &wake_q);
                err = 0;
                goto out_unlock;
        }
        /* GETVAL, GETPID, GETNCTN, GETZCNT: fall-through */
        }
        err = -EINVAL;
        if (semnum < 0 || semnum >= nsems)
                goto out_rcu_wakeup;

        sem_lock(sma, NULL, -1);
        if (!ipc_valid_object(&sma->sem_perm)) {
                err = -EIDRM;
                goto out_unlock;
        }
        curr = &sma->sems[semnum];

        switch (cmd) {
        case GETVAL:
                err = curr->semval;
                goto out_unlock;
        case GETPID:
                err = curr->sempid;
                goto out_unlock;
        case GETNCNT:
                err = count_semcnt(sma, semnum, 0);
                goto out_unlock;
        case GETZCNT:
                err = count_semcnt(sma, semnum, 1);
                goto out_unlock;
        }

out_unlock:
        sem_unlock(sma, -1);
out_rcu_wakeup:
        rcu_read_unlock();
        wake_up_q(&wake_q);
out_free:
        if (sem_io != fast_sem_io)
                ipc_free(sem_io);
        return err;
}

static inline unsigned long
copy_semid_from_user(struct semid64_ds *out, void __user *buf, int version)
{
        switch (version) {
        case IPC_64:
                if (copy_from_user(out, buf, sizeof(*out)))
                        return -EFAULT;
                return 0;
        case IPC_OLD:
            {
                struct semid_ds tbuf_old;

                if (copy_from_user(&tbuf_old, buf, sizeof(tbuf_old)))
                        return -EFAULT;

                out->sem_perm.uid       = tbuf_old.sem_perm.uid;
                out->sem_perm.gid       = tbuf_old.sem_perm.gid;
                out->sem_perm.mode      = tbuf_old.sem_perm.mode;

                return 0;
            }
        default:
                return -EINVAL;
        }
}

/*
 * This function handles some semctl commands which require the rwsem
 * to be held in write mode.
 * NOTE: no locks must be held, the rwsem is taken inside this function.
 */
static int semctl_down(struct ipc_namespace *ns, int semid,
                       int cmd, int version, void __user *p)
{
        struct sem_array *sma;
        int err;
        struct semid64_ds semid64;
        struct kern_ipc_perm *ipcp;

        if (cmd == IPC_SET) {
                if (copy_semid_from_user(&semid64, p, version))
                        return -EFAULT;
        }

        down_write(&sem_ids(ns).rwsem);
        rcu_read_lock();

        ipcp = ipcctl_pre_down_nolock(ns, &sem_ids(ns), semid, cmd,
                                      &semid64.sem_perm, 0);
        if (IS_ERR(ipcp)) {
                err = PTR_ERR(ipcp);
                goto out_unlock1;
        }

        sma = container_of(ipcp, struct sem_array, sem_perm);

        err = security_sem_semctl(sma, cmd);
        if (err)
                goto out_unlock1;

        switch (cmd) {
        case IPC_RMID:
                sem_lock(sma, NULL, -1);
                /* freeary unlocks the ipc object and rcu */
                freeary(ns, ipcp);
                goto out_up;
        case IPC_SET:
                sem_lock(sma, NULL, -1);
                err = ipc_update_perm(&semid64.sem_perm, ipcp);
                if (err)
                        goto out_unlock0;
                sma->sem_ctime = get_seconds();
                break;
        default:
                err = -EINVAL;
                goto out_unlock1;
        }

out_unlock0:
        sem_unlock(sma, -1);
out_unlock1:
        rcu_read_unlock();
out_up:
        up_write(&sem_ids(ns).rwsem);
        return err;
}

SYSCALL_DEFINE4(semctl, int, semid, int, semnum, int, cmd, unsigned long, arg)
{
        int version;
        struct ipc_namespace *ns;
        void __user *p = (void __user *)arg;

        if (semid < 0)
                return -EINVAL;

        version = ipc_parse_version(&cmd);
        ns = current->nsproxy->ipc_ns;

        switch (cmd) {
        case IPC_INFO:
        case SEM_INFO:
        case IPC_STAT:
        case SEM_STAT:
                return semctl_nolock(ns, semid, cmd, version, p);
        case GETALL:
        case GETVAL:
        case GETPID:
        case GETNCNT:
        case GETZCNT:
        case SETALL:
                return semctl_main(ns, semid, semnum, cmd, p);
        case SETVAL:
                return semctl_setval(ns, semid, semnum, arg);
        case IPC_RMID:
        case IPC_SET:
                return semctl_down(ns, semid, cmd, version, p);
        default:
                return -EINVAL;
        }
}

/* If the task doesn't already have a undo_list, then allocate one
 * here.  We guarantee there is only one thread using this undo list,
 * and current is THE ONE
 *
 * If this allocation and assignment succeeds, but later
 * portions of this code fail, there is no need to free the sem_undo_list.
 * Just let it stay associated with the task, and it'll be freed later
 * at exit time.
 *
 * This can block, so callers must hold no locks.
 */
static inline int get_undo_list(struct sem_undo_list **undo_listp)
{
        struct sem_undo_list *undo_list;

        undo_list = current->sysvsem.undo_list;
        if (!undo_list) {
                undo_list = kzalloc(sizeof(*undo_list), GFP_KERNEL);
                if (undo_list == NULL)
                        return -ENOMEM;
                spin_lock_init(&undo_list->lock);
                atomic_set(&undo_list->refcnt, 1);
                INIT_LIST_HEAD(&undo_list->list_proc);

                current->sysvsem.undo_list = undo_list;
        }
        *undo_listp = undo_list;
        return 0;
}

static struct sem_undo *__lookup_undo(struct sem_undo_list *ulp, int semid)
{
        struct sem_undo *un;

        list_for_each_entry_rcu(un, &ulp->list_proc, list_proc) {
                if (un->semid == semid)
                        return un;
        }
        return NULL;
}

static struct sem_undo *lookup_undo(struct sem_undo_list *ulp, int semid)
{
        struct sem_undo *un;

        assert_spin_locked(&ulp->lock);

        un = __lookup_undo(ulp, semid);
        if (un) {
                list_del_rcu(&un->list_proc);
                list_add_rcu(&un->list_proc, &ulp->list_proc);
        }
        return un;
}

/**
 * find_alloc_undo - lookup (and if not present create) undo array
 * @ns: namespace
 * @semid: semaphore array id
 *
 * The function looks up (and if not present creates) the undo structure.
 * The size of the undo structure depends on the size of the semaphore
 * array, thus the alloc path is not that straightforward.
 * Lifetime-rules: sem_undo is rcu-protected, on success, the function
 * performs a rcu_read_lock().
 */
static struct sem_undo *find_alloc_undo(struct ipc_namespace *ns, int semid)
{
        struct sem_array *sma;
        struct sem_undo_list *ulp;
        struct sem_undo *un, *new;
        int nsems, error;

        error = get_undo_list(&ulp);
        if (error)
                return ERR_PTR(error);

        rcu_read_lock();
        spin_lock(&ulp->lock);
        un = lookup_undo(ulp, semid);
        spin_unlock(&ulp->lock);
        if (likely(un != NULL))
                goto out;

        /* no undo structure around - allocate one. */
        /* step 1: figure out the size of the semaphore array */
        sma = sem_obtain_object_check(ns, semid);
        if (IS_ERR(sma)) {
                rcu_read_unlock();
                return ERR_CAST(sma);
        }

        nsems = sma->sem_nsems;
        if (!ipc_rcu_getref(sma)) {
                rcu_read_unlock();
                un = ERR_PTR(-EIDRM);
                goto out;
        }
        rcu_read_unlock();

        /* step 2: allocate new undo structure */
        new = kzalloc(sizeof(struct sem_undo) + sizeof(short)*nsems, GFP_KERNEL);
        if (!new) {
                ipc_rcu_putref(sma, sem_rcu_free);
                return ERR_PTR(-ENOMEM);
        }

        /* step 3: Acquire the lock on semaphore array */
        rcu_read_lock();
        sem_lock_and_putref(sma);
        if (!ipc_valid_object(&sma->sem_perm)) {
                sem_unlock(sma, -1);
                rcu_read_unlock();
                kfree(new);
                un = ERR_PTR(-EIDRM);
                goto out;
        }
        spin_lock(&ulp->lock);

        /*
         * step 4: check for races: did someone else allocate the undo struct?
         */
        un = lookup_undo(ulp, semid);
        if (un) {
                kfree(new);
                goto success;
        }
        /* step 5: initialize & link new undo structure */
        new->semadj = (short *) &new[1];
        new->ulp = ulp;
        new->semid = semid;
        assert_spin_locked(&ulp->lock);
        list_add_rcu(&new->list_proc, &ulp->list_proc);
        ipc_assert_locked_object(&sma->sem_perm);
        list_add(&new->list_id, &sma->list_id);
        un = new;

success:
        spin_unlock(&ulp->lock);
        sem_unlock(sma, -1);
out:
        return un;
}

SYSCALL_DEFINE4(semtimedop, int, semid, struct sembuf __user *, tsops,
                unsigned, nsops, const struct timespec __user *, timeout)
{
        int error = -EINVAL;
        struct sem_array *sma;
        struct sembuf fast_sops[SEMOPM_FAST];
        struct sembuf *sops = fast_sops, *sop;
        struct sem_undo *un;
        int max, locknum;
        bool undos = false, alter = false, dupsop = false;
        struct sem_queue queue;
        unsigned long dup = 0, jiffies_left = 0;
        struct ipc_namespace *ns;

        ns = current->nsproxy->ipc_ns;

        if (nsops < 1 || semid < 0)
                return -EINVAL;
        if (nsops > ns->sc_semopm)
                return -E2BIG;
        if (nsops > SEMOPM_FAST) {
                sops = kmalloc(sizeof(*sops)*nsops, GFP_KERNEL);
                if (sops == NULL)
                        return -ENOMEM;
        }

        if (copy_from_user(sops, tsops, nsops * sizeof(*tsops))) {
                error =  -EFAULT;
                goto out_free;
        }

        if (timeout) {
                struct timespec _timeout;
                if (copy_from_user(&_timeout, timeout, sizeof(*timeout))) {
                        error = -EFAULT;
                        goto out_free;
                }
                if (_timeout.tv_sec < 0 || _timeout.tv_nsec < 0 ||
                        _timeout.tv_nsec >= 1000000000L) {
                        error = -EINVAL;
                        goto out_free;
                }
                jiffies_left = timespec_to_jiffies(&_timeout);
        }

        max = 0;
        for (sop = sops; sop < sops + nsops; sop++) {
                unsigned long mask = 1ULL << ((sop->sem_num) % BITS_PER_LONG);

                if (sop->sem_num >= max)
                        max = sop->sem_num;
                if (sop->sem_flg & SEM_UNDO)
                        undos = true;
                if (dup & mask) {
                        /*
                         * There was a previous alter access that appears
                         * to have accessed the same semaphore, thus use
                         * the dupsop logic. "appears", because the detection
                         * can only check % BITS_PER_LONG.
                         */
                        dupsop = true;
                }
                if (sop->sem_op != 0) {
                        alter = true;
                        dup |= mask;
                }
        }

        if (undos) {
                /* On success, find_alloc_undo takes the rcu_read_lock */
                un = find_alloc_undo(ns, semid);
                if (IS_ERR(un)) {
                        error = PTR_ERR(un);
                        goto out_free;
                }
        } else {
                un = NULL;
                rcu_read_lock();
        }

        sma = sem_obtain_object_check(ns, semid);
        if (IS_ERR(sma)) {
                rcu_read_unlock();
                error = PTR_ERR(sma);
                goto out_free;
        }

        error = -EFBIG;
        if (max >= sma->sem_nsems) {
                rcu_read_unlock();
                goto out_free;
        }

        error = -EACCES;
        if (ipcperms(ns, &sma->sem_perm, alter ? S_IWUGO : S_IRUGO)) {
                rcu_read_unlock();
                goto out_free;
        }

        error = security_sem_semop(sma, sops, nsops, alter);
        if (error) {
                rcu_read_unlock();
                goto out_free;
        }

        error = -EIDRM;
        locknum = sem_lock(sma, sops, nsops);
        /*
         * We eventually might perform the following check in a lockless
         * fashion, considering ipc_valid_object() locking constraints.
         * If nsops == 1 and there is no contention for sem_perm.lock, then
         * only a per-semaphore lock is held and it's OK to proceed with the
         * check below. More details on the fine grained locking scheme
         * entangled here and why it's RMID race safe on comments at sem_lock()
         */
        if (!ipc_valid_object(&sma->sem_perm))
                goto out_unlock_free;
        /*
         * semid identifiers are not unique - find_alloc_undo may have
         * allocated an undo structure, it was invalidated by an RMID
         * and now a new array with received the same id. Check and fail.
         * This case can be detected checking un->semid. The existence of
         * "un" itself is guaranteed by rcu.
         */
        if (un && un->semid == -1)
                goto out_unlock_free;

        queue.sops = sops;
        queue.nsops = nsops;
        queue.undo = un;
        queue.pid = task_tgid_vnr(current);
        queue.alter = alter;
        queue.dupsop = dupsop;

        error = perform_atomic_semop(sma, &queue);
        if (error == 0) { /* non-blocking succesfull path */
                DEFINE_WAKE_Q(wake_q);

                /*
                 * If the operation was successful, then do
                 * the required updates.
                 */
                if (alter)
                        do_smart_update(sma, sops, nsops, 1, &wake_q);
                else
                        set_semotime(sma, sops);

                sem_unlock(sma, locknum);
                rcu_read_unlock();
                wake_up_q(&wake_q);

                goto out_free;
        }
        if (error < 0) /* non-blocking error path */
                goto out_unlock_free;

        /*
         * We need to sleep on this operation, so we put the current
         * task into the pending queue and go to sleep.
         */
        if (nsops == 1) {
                struct sem *curr;
                curr = &sma->sems[sops->sem_num];

                if (alter) {
                        if (sma->complex_count) {
                                list_add_tail(&queue.list,
                                                &sma->pending_alter);
                        } else {

                                list_add_tail(&queue.list,
                                                &curr->pending_alter);
                        }
                } else {
                        list_add_tail(&queue.list, &curr->pending_const);
                }
        } else {
                if (!sma->complex_count)
                        merge_queues(sma);

                if (alter)
                        list_add_tail(&queue.list, &sma->pending_alter);
                else
                        list_add_tail(&queue.list, &sma->pending_const);

                sma->complex_count++;
        }

        do {
                queue.status = -EINTR;
                queue.sleeper = current;

                __set_current_state(TASK_INTERRUPTIBLE);
                sem_unlock(sma, locknum);
                rcu_read_unlock();

                if (timeout)
                        jiffies_left = schedule_timeout(jiffies_left);
                else
                        schedule();

                /*
                 * fastpath: the semop has completed, either successfully or
                 * not, from the syscall pov, is quite irrelevant to us at this
                 * point; we're done.
                 *
                 * We _do_ care, nonetheless, about being awoken by a signal or
                 * spuriously.  The queue.status is checked again in the
                 * slowpath (aka after taking sem_lock), such that we can detect
                 * scenarios where we were awakened externally, during the
                 * window between wake_q_add() and wake_up_q().
                 */
                error = READ_ONCE(queue.status);
                if (error != -EINTR) {
                        /*
                         * User space could assume that semop() is a memory
                         * barrier: Without the mb(), the cpu could
                         * speculatively read in userspace stale data that was
                         * overwritten by the previous owner of the semaphore.
                         */
                        smp_mb();
                        goto out_free;
                }

                rcu_read_lock();
                locknum = sem_lock(sma, sops, nsops);

                if (!ipc_valid_object(&sma->sem_perm))
                        goto out_unlock_free;

                error = READ_ONCE(queue.status);

                /*
                 * If queue.status != -EINTR we are woken up by another process.
                 * Leave without unlink_queue(), but with sem_unlock().
                 */
                if (error != -EINTR)
                        goto out_unlock_free;

                /*
                 * If an interrupt occurred we have to clean up the queue.
                 */
                if (timeout && jiffies_left == 0)
                        error = -EAGAIN;
        } while (error == -EINTR && !signal_pending(current)); /* spurious */

        unlink_queue(sma, &queue);

out_unlock_free:
        sem_unlock(sma, locknum);
        rcu_read_unlock();
out_free:
        if (sops != fast_sops)
                kfree(sops);
        return error;
}

SYSCALL_DEFINE3(semop, int, semid, struct sembuf __user *, tsops,
                unsigned, nsops)
{
        return sys_semtimedop(semid, tsops, nsops, NULL);
}

/* If CLONE_SYSVSEM is set, establish sharing of SEM_UNDO state between
 * parent and child tasks.
 */

int copy_semundo(unsigned long clone_flags, struct task_struct *tsk)
{
        struct sem_undo_list *undo_list;
        int error;

        if (clone_flags & CLONE_SYSVSEM) {
                error = get_undo_list(&undo_list);
                if (error)
                        return error;
                atomic_inc(&undo_list->refcnt);
                tsk->sysvsem.undo_list = undo_list;
        } else
                tsk->sysvsem.undo_list = NULL;

        return 0;
}

/*
 * add semadj values to semaphores, free undo structures.
 * undo structures are not freed when semaphore arrays are destroyed
 * so some of them may be out of date.
 * IMPLEMENTATION NOTE: There is some confusion over whether the
 * set of adjustments that needs to be done should be done in an atomic
 * manner or not. That is, if we are attempting to decrement the semval
 * should we queue up and wait until we can do so legally?
 * The original implementation attempted to do this (queue and wait).
 * The current implementation does not do so. The POSIX standard
 * and SVID should be consulted to determine what behavior is mandated.
 */
void exit_sem(struct task_struct *tsk)
{
        struct sem_undo_list *ulp;

        ulp = tsk->sysvsem.undo_list;
        if (!ulp)
                return;
        tsk->sysvsem.undo_list = NULL;

        if (!atomic_dec_and_test(&ulp->refcnt))
                return;

        for (;;) {
                struct sem_array *sma;
                struct sem_undo *un;
                int semid, i;
                DEFINE_WAKE_Q(wake_q);

                cond_resched();

                rcu_read_lock();
                un = list_entry_rcu(ulp->list_proc.next,
                                    struct sem_undo, list_proc);
                if (&un->list_proc == &ulp->list_proc) {
                        /*
                         * We must wait for freeary() before freeing this ulp,
                         * in case we raced with last sem_undo. There is a small
                         * possibility where we exit while freeary() didn't
                         * finish unlocking sem_undo_list.
                         */
                        spin_unlock_wait(&ulp->lock);
                        rcu_read_unlock();
                        break;
                }
                spin_lock(&ulp->lock);
                semid = un->semid;
                spin_unlock(&ulp->lock);

                /* exit_sem raced with IPC_RMID, nothing to do */
                if (semid == -1) {
                        rcu_read_unlock();
                        continue;
                }

                sma = sem_obtain_object_check(tsk->nsproxy->ipc_ns, semid);
                /* exit_sem raced with IPC_RMID, nothing to do */
                if (IS_ERR(sma)) {
                        rcu_read_unlock();
                        continue;
                }

                sem_lock(sma, NULL, -1);
                /* exit_sem raced with IPC_RMID, nothing to do */
                if (!ipc_valid_object(&sma->sem_perm)) {
                        sem_unlock(sma, -1);
                        rcu_read_unlock();
                        continue;
                }
                un = __lookup_undo(ulp, semid);
                if (un == NULL) {
                        /* exit_sem raced with IPC_RMID+semget() that created
                         * exactly the same semid. Nothing to do.
                         */
                        sem_unlock(sma, -1);
                        rcu_read_unlock();
                        continue;
                }

                /* remove un from the linked lists */
                ipc_assert_locked_object(&sma->sem_perm);
                list_del(&un->list_id);

                /* we are the last process using this ulp, acquiring ulp->lock
                 * isn't required. Besides that, we are also protected against
                 * IPC_RMID as we hold sma->sem_perm lock now
                 */
                list_del_rcu(&un->list_proc);

                /* perform adjustments registered in un */
                for (i = 0; i < sma->sem_nsems; i++) {
                        struct sem *semaphore = &sma->sems[i];
                        if (un->semadj[i]) {
                                semaphore->semval += un->semadj[i];
                                /*
                                 * Range checks of the new semaphore value,
                                 * not defined by sus:
                                 * - Some unices ignore the undo entirely
                                 *   (e.g. HP UX 11i 11.22, Tru64 V5.1)
                                 * - some cap the value (e.g. FreeBSD caps
                                 *   at 0, but doesn't enforce SEMVMX)
                                 *
                                 * Linux caps the semaphore value, both at 0
                                 * and at SEMVMX.
                                 *
                                 *      Manfred <manfred@colorfullife.com>
                                 */
                                if (semaphore->semval < 0)
                                        semaphore->semval = 0;
                                if (semaphore->semval > SEMVMX)
                                        semaphore->semval = SEMVMX;
                                semaphore->sempid = task_tgid_vnr(current);
                        }
                }
                /* maybe some queued-up processes were waiting for this */
                do_smart_update(sma, NULL, 0, 1, &wake_q);
                sem_unlock(sma, -1);
                rcu_read_unlock();
                wake_up_q(&wake_q);

                kfree_rcu(un, rcu);
        }
        kfree(ulp);
}

#ifdef CONFIG_PROC_FS
static int sysvipc_sem_proc_show(struct seq_file *s, void *it)
{
        struct user_namespace *user_ns = seq_user_ns(s);
        struct sem_array *sma = it;
        time_t sem_otime;

        /*
         * The proc interface isn't aware of sem_lock(), it calls
         * ipc_lock_object() directly (in sysvipc_find_ipc).
         * In order to stay compatible with sem_lock(), we must
         * enter / leave complex_mode.
         */
        complexmode_enter(sma);

        sem_otime = get_semotime(sma);

        seq_printf(s,
                   "%10d %10d  %4o %10u %5u %5u %5u %5u %10lu %10lu\n",
                   sma->sem_perm.key,
                   sma->sem_perm.id,
                   sma->sem_perm.mode,
                   sma->sem_nsems,
                   from_kuid_munged(user_ns, sma->sem_perm.uid),
                   from_kgid_munged(user_ns, sma->sem_perm.gid),
                   from_kuid_munged(user_ns, sma->sem_perm.cuid),
                   from_kgid_munged(user_ns, sma->sem_perm.cgid),
                   sem_otime,
                   sma->sem_ctime);

        complexmode_tryleave(sma);

        return 0;
}
#endif