bootm: Use selected configuration for ramdisk and fdt

[karo-tx-uboot.git] / README

diff --git a/README b/README
index d51ece946c309a37fa3fcf5c1d91f0174e2b016f..33b5728abc6bd2cfb4b2f3304ccba0b81fa99433 100644 (file)
--- a/README
+++ b/README
@@ -201,7 +201,6 @@ Directory Hierarchy:
       /mpc5xx          Files specific to Freescale MPC5xx CPUs
       /mpc5xxx         Files specific to Freescale MPC5xxx CPUs
       /mpc8xx          Files specific to Freescale MPC8xx CPUs
       /mpc5xx          Files specific to Freescale MPC5xx CPUs
       /mpc5xxx         Files specific to Freescale MPC5xxx CPUs
       /mpc8xx          Files specific to Freescale MPC8xx CPUs

-      /mpc8220         Files specific to Freescale MPC8220 CPUs

       /mpc824x         Files specific to Freescale MPC824x CPUs
       /mpc8260         Files specific to Freescale MPC8260 CPUs
       /mpc85xx         Files specific to Freescale MPC85xx CPUs
       /mpc824x         Files specific to Freescale MPC824x CPUs
       /mpc8260         Files specific to Freescale MPC8260 CPUs
       /mpc85xx         Files specific to Freescale MPC85xx CPUs


@@ -414,11 +413,22 @@ The following options need to be configured:
                See Freescale App Note 4493 for more information about
                this erratum.
 
                See Freescale App Note 4493 for more information about
                this erratum.
 

+               CONFIG_A003399_NOR_WORKAROUND
+               Enables a workaround for IFC erratum A003399. It is only
+               requred during NOR boot.
+

                CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
                This is the value to write into CCSR offset 0x18600
                according to the A004510 workaround.
 
                CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY
 
                This is the value to write into CCSR offset 0x18600
                according to the A004510 workaround.
 

+               CONFIG_SYS_FSL_DSP_M2_RAM_ADDR
+               This value denotes start offset of M2 memory
+               which is directly connected to the DSP core.
+
+               CONFIG_SYS_FSL_DSP_CCSRBAR_DEFAULT
+               This value denotes start offset of DSP CCSR space.
+

 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 


@@ -485,6 +495,24 @@ The following options need to be configured:
                Thumb2 this flag will result in Thumb2 code generated by
                GCC.
 
                Thumb2 this flag will result in Thumb2 code generated by
                GCC.
 

+               CONFIG_ARM_ERRATA_716044
+               CONFIG_ARM_ERRATA_742230
+               CONFIG_ARM_ERRATA_743622
+               CONFIG_ARM_ERRATA_751472
+
+               If set, the workarounds for these ARM errata are applied early
+               during U-Boot startup. Note that these options force the
+               workarounds to be applied; no CPU-type/version detection
+               exists, unlike the similar options in the Linux kernel. Do not
+               set these options unless they apply!
+
+- CPU timer options:
+               CONFIG_SYS_HZ
+
+               The frequency of the timer returned by get_timer().
+               get_timer() must operate in milliseconds and this CONFIG
+               option must be set to 1000.
+

 - Linux Kernel Interface:
                CONFIG_CLOCKS_IN_MHZ
 
 - Linux Kernel Interface:
                CONFIG_CLOCKS_IN_MHZ
 


@@ -616,14 +644,6 @@ The following options need to be configured:
                boot loader that has already initialized the UART.  Define this
                variable to flush the UART at init time.
 
                boot loader that has already initialized the UART.  Define this
                variable to flush the UART at init time.
 

-               CONFIG_SYS_NS16550_BROKEN_TEMT
-
-               16550 UART set the Transmitter Empty (TEMT) Bit when all output
-               has finished and the transmitter is totally empty. U-Boot waits
-               for this bit to be set to initialize the serial console. On some
-               broken platforms this bit is not set in SPL making U-Boot to
-               hang while waiting for TEMT. Define this option to avoid it.
-

 
 - Console Interface:
                Depending on board, define exactly one serial port
 
 - Console Interface:
                Depending on board, define exactly one serial port


@@ -834,6 +854,7 @@ The following options need to be configured:
                CONFIG_CMD_FDOS         * Dos diskette Support
                CONFIG_CMD_FLASH          flinfo, erase, protect
                CONFIG_CMD_FPGA           FPGA device initialization support
                CONFIG_CMD_FDOS         * Dos diskette Support
                CONFIG_CMD_FLASH          flinfo, erase, protect
                CONFIG_CMD_FPGA           FPGA device initialization support

+               CONFIG_CMD_FUSE         * Device fuse support

                CONFIG_CMD_GETTIME      * Get time since boot
                CONFIG_CMD_GO           * the 'go' command (exec code)
                CONFIG_CMD_GREPENV      * search environment
                CONFIG_CMD_GETTIME      * Get time since boot
                CONFIG_CMD_GO           * the 'go' command (exec code)
                CONFIG_CMD_GREPENV      * search environment


@@ -843,7 +864,7 @@ The following options need to be configured:
                CONFIG_CMD_IDE          * IDE harddisk support
                CONFIG_CMD_IMI            iminfo
                CONFIG_CMD_IMLS           List all images found in NOR flash
                CONFIG_CMD_IDE          * IDE harddisk support
                CONFIG_CMD_IMI            iminfo
                CONFIG_CMD_IMLS           List all images found in NOR flash

-               CONFIG_CMD_IMLS_NAND      List all images found in NAND flash
+               CONFIG_CMD_IMLS_NAND    * List all images found in NAND flash

                CONFIG_CMD_IMMAP        * IMMR dump support
                CONFIG_CMD_IMPORTENV    * import an environment
                CONFIG_CMD_INI          * import data from an ini file into the env
                CONFIG_CMD_IMMAP        * IMMR dump support
                CONFIG_CMD_IMPORTENV    * import an environment
                CONFIG_CMD_INI          * import data from an ini file into the env


@@ -851,22 +872,24 @@ The following options need to be configured:
                CONFIG_CMD_ITEST          Integer/string test of 2 values
                CONFIG_CMD_JFFS2        * JFFS2 Support
                CONFIG_CMD_KGDB         * kgdb
                CONFIG_CMD_ITEST          Integer/string test of 2 values
                CONFIG_CMD_JFFS2        * JFFS2 Support
                CONFIG_CMD_KGDB         * kgdb

-               CONFIG_CMD_LDRINFO        ldrinfo (display Blackfin loader)
+               CONFIG_CMD_LDRINFO      * ldrinfo (display Blackfin loader)

                CONFIG_CMD_LINK_LOCAL   * link-local IP address auto-configuration
                                          (169.254.*.*)
                CONFIG_CMD_LOADB          loadb
                CONFIG_CMD_LOADS          loads
                CONFIG_CMD_LINK_LOCAL   * link-local IP address auto-configuration
                                          (169.254.*.*)
                CONFIG_CMD_LOADB          loadb
                CONFIG_CMD_LOADS          loads

-               CONFIG_CMD_MD5SUM         print md5 message digest
+               CONFIG_CMD_MD5SUM       * print md5 message digest

                                          (requires CONFIG_CMD_MEMORY and CONFIG_MD5)
                CONFIG_CMD_MEMINFO      * Display detailed memory information
                CONFIG_CMD_MEMORY         md, mm, nm, mw, cp, cmp, crc, base,
                                          (requires CONFIG_CMD_MEMORY and CONFIG_MD5)
                CONFIG_CMD_MEMINFO      * Display detailed memory information
                CONFIG_CMD_MEMORY         md, mm, nm, mw, cp, cmp, crc, base,

-                                         loop, loopw, mtest
+                                         loop, loopw
+               CONFIG_CMD_MEMTEST      * mtest

                CONFIG_CMD_MISC           Misc functions like sleep etc
                CONFIG_CMD_MMC          * MMC memory mapped support
                CONFIG_CMD_MII          * MII utility commands
                CONFIG_CMD_MTDPARTS     * MTD partition support
                CONFIG_CMD_NAND         * NAND support
                CONFIG_CMD_NET            bootp, tftpboot, rarpboot
                CONFIG_CMD_MISC           Misc functions like sleep etc
                CONFIG_CMD_MMC          * MMC memory mapped support
                CONFIG_CMD_MII          * MII utility commands
                CONFIG_CMD_MTDPARTS     * MTD partition support
                CONFIG_CMD_NAND         * NAND support
                CONFIG_CMD_NET            bootp, tftpboot, rarpboot

+               CONFIG_CMD_NFS            NFS support

                CONFIG_CMD_PCA953X      * PCA953x I2C gpio commands
                CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command
                CONFIG_CMD_PCI          * pciinfo
                CONFIG_CMD_PCA953X      * PCA953x I2C gpio commands
                CONFIG_CMD_PCA953X_INFO * PCA953x I2C gpio info command
                CONFIG_CMD_PCI          * pciinfo


@@ -885,8 +908,9 @@ The following options need to be configured:
                CONFIG_CMD_SETGETDCR      Support for DCR Register access
                                          (4xx only)
                CONFIG_CMD_SF           * Read/write/erase SPI NOR flash
                CONFIG_CMD_SETGETDCR      Support for DCR Register access
                                          (4xx only)
                CONFIG_CMD_SF           * Read/write/erase SPI NOR flash

-               CONFIG_CMD_SHA1SUM        print sha1 memory digest
+               CONFIG_CMD_SHA1SUM      * print sha1 memory digest

                                          (requires CONFIG_CMD_MEMORY)
                                          (requires CONFIG_CMD_MEMORY)

+               CONFIG_CMD_SOFTSWITCH   * Soft switch setting command for BF60x

                CONFIG_CMD_SOURCE         "source" command Support
                CONFIG_CMD_SPI          * SPI serial bus support
                CONFIG_CMD_TFTPSRV      * TFTP transfer in server mode
                CONFIG_CMD_SOURCE         "source" command Support
                CONFIG_CMD_SPI          * SPI serial bus support
                CONFIG_CMD_TFTPSRV      * TFTP transfer in server mode


@@ -896,6 +920,7 @@ The following options need to be configured:
                CONFIG_CMD_USB          * USB support
                CONFIG_CMD_CDP          * Cisco Discover Protocol support
                CONFIG_CMD_MFSL         * Microblaze FSL support
                CONFIG_CMD_USB          * USB support
                CONFIG_CMD_CDP          * Cisco Discover Protocol support
                CONFIG_CMD_MFSL         * Microblaze FSL support

+               CONFIG_CMD_XIMG           Load part of Multi Image

 
 
                EXAMPLE: If you want all functions except of network
 
 
                EXAMPLE: If you want all functions except of network


@@ -919,6 +944,13 @@ The following options need to be configured:
 
                XXX - this list needs to get updated!
 
 
                XXX - this list needs to get updated!
 

+- Regular expression support:
+               CONFIG_REGEX
+                If this variable is defined, U-Boot is linked against
+                the SLRE (Super Light Regular Expression) library,
+                which adds regex support to some commands, as for
+                example "env grep" and "setexpr".
+

 - Device tree:
                CONFIG_OF_CONTROL
                If this variable is defined, U-Boot will use a device tree
 - Device tree:
                CONFIG_OF_CONTROL
                If this variable is defined, U-Boot will use a device tree


@@ -1190,7 +1222,23 @@ The following options need to be configured:
                        If this option is set, the driver enables cache flush.
 
 - TPM Support:
                        If this option is set, the driver enables cache flush.
 
 - TPM Support:

-               CONFIG_GENERIC_LPC_TPM
+               CONFIG_TPM
+               Support TPM devices.
+
+               CONFIG_TPM_TIS_I2C
+               Support for i2c bus TPM devices. Only one device
+               per system is supported at this time.
+
+                       CONFIG_TPM_TIS_I2C_BUS_NUMBER
+                       Define the the i2c bus number for the TPM device
+
+                       CONFIG_TPM_TIS_I2C_SLAVE_ADDRESS
+                       Define the TPM's address on the i2c bus
+
+                       CONFIG_TPM_TIS_I2C_BURST_LIMITATION
+                       Define the burst count bytes upper limit
+
+               CONFIG_TPM_TIS_LPC

                Support for generic parallel port TPM devices. Only one device
                per system is supported at this time.
 
                Support for generic parallel port TPM devices. Only one device
                per system is supported at this time.
 


@@ -1226,6 +1274,9 @@ The following options need to be configured:
                CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
                txfilltuning field in the EHCI controller on reset.
 
                CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
                txfilltuning field in the EHCI controller on reset.
 

+               CONFIG_USB_HUB_MIN_POWER_ON_DELAY defines the minimum
+               interval for usb hub power-on delay.(minimum 100msec)
+

 - USB Device:
                Define the below if you wish to use the USB console.
                Once firmware is rebuilt from a serial console issue the
 - USB Device:
                Define the below if you wish to use the USB console.
                Once firmware is rebuilt from a serial console issue the


@@ -1325,6 +1376,35 @@ The following options need to be configured:
                        CONFIG_SH_MMCIF_CLK
                        Define the clock frequency for MMCIF
 
                        CONFIG_SH_MMCIF_CLK
                        Define the clock frequency for MMCIF
 

+- USB Device Firmware Update (DFU) class support:
+               CONFIG_DFU_FUNCTION
+               This enables the USB portion of the DFU USB class
+
+               CONFIG_CMD_DFU
+               This enables the command "dfu" which is used to have
+               U-Boot create a DFU class device via USB.  This command
+               requires that the "dfu_alt_info" environment variable be
+               set and define the alt settings to expose to the host.
+
+               CONFIG_DFU_MMC
+               This enables support for exposing (e)MMC devices via DFU.
+
+               CONFIG_DFU_NAND
+               This enables support for exposing NAND devices via DFU.
+
+               CONFIG_SYS_DFU_DATA_BUF_SIZE
+               Dfu transfer uses a buffer before writing data to the
+               raw storage device. Make the size (in bytes) of this buffer
+               configurable. The size of this buffer is also configurable
+               through the "dfu_bufsiz" environment variable.
+
+               CONFIG_SYS_DFU_MAX_FILE_SIZE
+               When updating files rather than the raw storage device,
+               we use a static buffer to copy the file into and then write
+               the buffer once we've been given the whole file.  Define
+               this to the maximum filesize (in bytes) for the buffer.
+               Default is 4 MiB if undefined.
+

 - Journaling Flash filesystem support:
                CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
                CONFIG_JFFS2_NAND_DEV
 - Journaling Flash filesystem support:
                CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
                CONFIG_JFFS2_NAND_DEV


@@ -1371,6 +1451,11 @@ CBFS (Coreboot Filesystem) support
                Export function i8042_kbd_init, i8042_tstc and i8042_getc
                for cfb_console. Supports cursor blinking.
 
                Export function i8042_kbd_init, i8042_tstc and i8042_getc
                for cfb_console. Supports cursor blinking.
 

+               CONFIG_CROS_EC_KEYB
+               Enables a Chrome OS keyboard using the CROS_EC interface.
+               This uses CROS_EC to communicate with a second microcontroller
+               which provides key scans on request.
+

 - Video support:
                CONFIG_VIDEO
 
 - Video support:
                CONFIG_VIDEO
 


@@ -1563,14 +1648,6 @@ CBFS (Coreboot Filesystem) support
                        => vertically centered image
                           at x = dspWidth - bmpWidth - 9
 
                        => vertically centered image
                           at x = dspWidth - bmpWidth - 9
 

-               CONFIG_SPLASH_SCREEN_PREPARE
-
-               If this option is set then the board_splash_screen_prepare()
-               function, which must be defined in your code, is called as part
-               of the splash screen display sequence. It gives the board an
-               opportunity to prepare the splash image data before it is
-               processed and sent to the frame buffer by U-Boot.
-

 - Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
 
                If this option is set, additionally to standard BMP
 - Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
 
                If this option is set, additionally to standard BMP


@@ -1926,15 +2003,15 @@ CBFS (Coreboot Filesystem) support
 
                I2C_READ
 
 
                I2C_READ
 

-               Code that returns TRUE if the I2C data line is high,
-               FALSE if it is low.
+               Code that returns true if the I2C data line is high,
+               false if it is low.

 
                eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
 
                I2C_SDA(bit)
 
 
                eg: #define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
 
                I2C_SDA(bit)
 

-               If <bit> is TRUE, sets the I2C data line high. If it
-               is FALSE, it clears it (low).
+               If <bit> is true, sets the I2C data line high. If it
+               is false, it clears it (low).

 
                eg: #define I2C_SDA(bit) \
                        if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
 
                eg: #define I2C_SDA(bit) \
                        if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \


@@ -1942,8 +2019,8 @@ CBFS (Coreboot Filesystem) support
 
                I2C_SCL(bit)
 
 
                I2C_SCL(bit)
 

-               If <bit> is TRUE, sets the I2C clock line high. If it
-               is FALSE, it clears it (low).
+               If <bit> is true, sets the I2C clock line high. If it
+               is false, it clears it (low).

 
                eg: #define I2C_SCL(bit) \
                        if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
 
                eg: #define I2C_SCL(bit) \
                        if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \


@@ -2448,6 +2525,11 @@ CBFS (Coreboot Filesystem) support
                Define this option to include a destructive SPI flash
                test ('sf test').
 
                Define this option to include a destructive SPI flash
                test ('sf test').
 

+               CONFIG_SPI_FLASH_BAR            Ban/Extended Addr Reg
+
+               Define this option to use the Bank addr/Extended addr
+               support on SPI flashes which has size > 16Mbytes.
+

 - SystemACE Support:
                CONFIG_SYSTEMACE
 
 - SystemACE Support:
                CONFIG_SYSTEMACE
 


@@ -2499,6 +2581,16 @@ CBFS (Coreboot Filesystem) support
                Note: There is also a sha1sum command, which should perhaps
                be deprecated in favour of 'hash sha1'.
 
                Note: There is also a sha1sum command, which should perhaps
                be deprecated in favour of 'hash sha1'.
 

+- Signing support:
+               CONFIG_RSA
+
+               This enables the RSA algorithm used for FIT image verification
+               in U-Boot. See doc/uImage/signature for more information.
+
+               The signing part is build into mkimage regardless of this
+               option.
+
+

 - Show boot progress:
                CONFIG_SHOW_BOOT_PROGRESS
 
 - Show boot progress:
                CONFIG_SHOW_BOOT_PROGRESS
 


@@ -2723,6 +2815,11 @@ FIT uImage format:
                most specific compatibility entry of U-Boot's fdt's root node.
                The order of entries in the configuration's fdt is ignored.
 
                most specific compatibility entry of U-Boot's fdt's root node.
                The order of entries in the configuration's fdt is ignored.
 

+               CONFIG_FIT_SIGNATURE
+               This option enables signature verification of FIT uImages,
+               using a hash signed and verified using RSA. See
+               doc/uImage.FIT/signature.txt for more details.
+

 - Standalone program support:
                CONFIG_STANDALONE_LOAD_ADDR
 
 - Standalone program support:
                CONFIG_STANDALONE_LOAD_ADDR
 


@@ -2764,6 +2861,32 @@ FIT uImage format:
                Adds the MTD partitioning infrastructure from the Linux
                kernel. Needed for UBI support.
 
                Adds the MTD partitioning infrastructure from the Linux
                kernel. Needed for UBI support.
 

+- UBI support
+               CONFIG_CMD_UBI
+
+               Adds commands for interacting with MTD partitions formatted
+               with the UBI flash translation layer
+
+               Requires also defining CONFIG_RBTREE
+
+               CONFIG_UBI_SILENCE_MSG
+
+               Make the verbose messages from UBI stop printing.  This leaves
+               warnings and errors enabled.
+
+- UBIFS support
+               CONFIG_CMD_UBIFS
+
+               Adds commands for interacting with UBI volumes formatted as
+               UBIFS.  UBIFS is read-only in u-boot.
+
+               Requires UBI support as well as CONFIG_LZO
+
+               CONFIG_UBIFS_SILENCE_MSG
+
+               Make the verbose messages from UBIFS stop printing.  This leaves
+               warnings and errors enabled.
+

 - SPL framework
                CONFIG_SPL
                Enable building of SPL globally.
 - SPL framework
                CONFIG_SPL
                Enable building of SPL globally.


@@ -2771,8 +2894,18 @@ FIT uImage format:
                CONFIG_SPL_LDSCRIPT
                LDSCRIPT for linking the SPL binary.
 
                CONFIG_SPL_LDSCRIPT
                LDSCRIPT for linking the SPL binary.
 

+               CONFIG_SPL_MAX_FOOTPRINT
+               Maximum size in memory allocated to the SPL, BSS included.
+               When defined, the linker checks that the actual memory
+               used by SPL from _start to __bss_end does not exceed it.
+               CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE
+               must not be both defined at the same time.
+

                CONFIG_SPL_MAX_SIZE
                CONFIG_SPL_MAX_SIZE

-               Maximum binary size (text, data and rodata) of the SPL binary.
+               Maximum size of the SPL image (text, data, rodata, and
+               linker lists sections), BSS excluded.
+               When defined, the linker checks that the actual size does
+               not exceed it.

 
                CONFIG_SPL_TEXT_BASE
                TEXT_BASE for linking the SPL binary.
 
                CONFIG_SPL_TEXT_BASE
                TEXT_BASE for linking the SPL binary.


@@ -2785,7 +2918,11 @@ FIT uImage format:
                Link address for the BSS within the SPL binary.
 
                CONFIG_SPL_BSS_MAX_SIZE
                Link address for the BSS within the SPL binary.
 
                CONFIG_SPL_BSS_MAX_SIZE

-               Maximum binary size of the BSS section of the SPL binary.
+               Maximum size in memory allocated to the SPL BSS.
+               When defined, the linker checks that the actual memory used
+               by SPL from __bss_start to __bss_end does not exceed it.
+               CONFIG_SPL_MAX_FOOTPRINT and CONFIG_SPL_BSS_MAX_SIZE
+               must not be both defined at the same time.

 
                CONFIG_SPL_STACK
                Adress of the start of the stack SPL will use
 
                CONFIG_SPL_STACK
                Adress of the start of the stack SPL will use


@@ -2834,12 +2971,30 @@ FIT uImage format:
                Address, size and partition on the MMC to load U-Boot from
                when the MMC is being used in raw mode.
 
                Address, size and partition on the MMC to load U-Boot from
                when the MMC is being used in raw mode.
 

+               CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR
+               Sector to load kernel uImage from when MMC is being
+               used in raw mode (for Falcon mode)
+
+               CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR,
+               CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS
+               Sector and number of sectors to load kernel argument
+               parameters from when MMC is being used in raw mode
+               (for falcon mode)
+

                CONFIG_SPL_FAT_SUPPORT
                Support for fs/fat/libfat.o in SPL binary
 
                CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
                Filename to read to load U-Boot when reading from FAT
 
                CONFIG_SPL_FAT_SUPPORT
                Support for fs/fat/libfat.o in SPL binary
 
                CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME
                Filename to read to load U-Boot when reading from FAT
 

+               CONFIG_SPL_FAT_LOAD_KERNEL_NAME
+               Filename to read to load kernel uImage when reading
+               from FAT (for Falcon mode)
+
+               CONFIG_SPL_FAT_LOAD_ARGS_NAME
+               Filename to read to load kernel argument parameters
+               when reading from FAT (for Falcon mode)
+

                CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
                Set this for NAND SPL on PPC mpc83xx targets, so that
                start.S waits for the rest of the SPL to load before
                CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
                Set this for NAND SPL on PPC mpc83xx targets, so that
                start.S waits for the rest of the SPL to load before


@@ -2903,15 +3058,32 @@ FIT uImage format:
                CONFIG_SPL_LIBGENERIC_SUPPORT
                Support for lib/libgeneric.o in SPL binary
 
                CONFIG_SPL_LIBGENERIC_SUPPORT
                Support for lib/libgeneric.o in SPL binary
 

+               CONFIG_SPL_ENV_SUPPORT
+               Support for the environment operating in SPL binary
+
+               CONFIG_SPL_NET_SUPPORT
+               Support for the net/libnet.o in SPL binary.
+               It conflicts with SPL env from storage medium specified by
+               CONFIG_ENV_IS_xxx but CONFIG_ENV_IS_NOWHERE
+

                CONFIG_SPL_PAD_TO
                CONFIG_SPL_PAD_TO

-               Linker address to which the SPL should be padded before
-               appending the SPL payload.
+               Image offset to which the SPL should be padded before appending
+               the SPL payload. By default, this is defined as
+               CONFIG_SPL_MAX_SIZE, or 0 if CONFIG_SPL_MAX_SIZE is undefined.
+               CONFIG_SPL_PAD_TO must be either 0, meaning to append the SPL
+               payload without any padding, or >= CONFIG_SPL_MAX_SIZE.

 
                CONFIG_SPL_TARGET
                Final target image containing SPL and payload.  Some SPLs
                use an arch-specific makefile fragment instead, for
                example if more than one image needs to be produced.
 
 
                CONFIG_SPL_TARGET
                Final target image containing SPL and payload.  Some SPLs
                use an arch-specific makefile fragment instead, for
                example if more than one image needs to be produced.
 

+               CONFIG_FIT_SPL_PRINT
+               Printing information about a FIT image adds quite a bit of
+               code to SPL. So this is normally disabled in SPL. Use this
+               option to re-enable it. This will affect the output of the
+               bootm command when booting a FIT image.
+

 Modem Support:
 --------------
 
 Modem Support:
 --------------
 


@@ -3171,6 +3343,15 @@ Configuration Settings:
                digits and dots.  Recommended value: 45 (9..1) for 80
                column displays, 15 (3..1) for 40 column displays.
 
                digits and dots.  Recommended value: 45 (9..1) for 80
                column displays, 15 (3..1) for 40 column displays.
 

+- CONFIG_FLASH_VERIFY
+               If defined, the content of the flash (destination) is compared
+               against the source after the write operation. An error message
+               will be printed when the contents are not identical.
+               Please note that this option is useless in nearly all cases,
+               since such flash programming errors usually are detected earlier
+               while unprotecting/erasing/programming. Please only enable
+               this option if you really know what you are doing.
+

 - CONFIG_SYS_RX_ETH_BUFFER:
                Defines the number of Ethernet receive buffers. On some
                Ethernet controllers it is recommended to set this value
 - CONFIG_SYS_RX_ETH_BUFFER:
                Defines the number of Ethernet receive buffers. On some
                Ethernet controllers it is recommended to set this value


@@ -3230,6 +3411,27 @@ Configuration Settings:
        If defined, don't allow the -f switch to env set override variable
        access flags.
 
        If defined, don't allow the -f switch to env set override variable
        access flags.
 

+- CONFIG_SYS_GENERIC_BOARD
+       This selects the architecture-generic board system instead of the
+       architecture-specific board files. It is intended to move boards
+       to this new framework over time. Defining this will disable the
+       arch/foo/lib/board.c file and use common/board_f.c and
+       common/board_r.c instead. To use this option your architecture
+       must support it (i.e. must define __HAVE_ARCH_GENERIC_BOARD in
+       its config.mk file). If you find problems enabling this option on
+       your board please report the problem and send patches!
+
+- CONFIG_SYS_SYM_OFFSETS
+       This is set by architectures that use offsets for link symbols
+       instead of absolute values. So bss_start is obtained using an
+       offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than
+       directly. You should not need to touch this setting.
+
+- CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
+       This is set by OMAP boards for the max time that reset should
+       be asserted. See doc/README.omap-reset-time for details on how
+       the value can be calulated on a given board.
+

 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:
 The following definitions that deal with the placement and management
 of environment data (variable area); in general, we support the
 following configurations:


@@ -3463,6 +3665,84 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface.
        environment. If redundant environment is used, it will be copied to
        CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE.
 
        environment. If redundant environment is used, it will be copied to
        CONFIG_NAND_ENV_DST + CONFIG_ENV_SIZE.
 

+- CONFIG_ENV_IS_IN_UBI:
+
+       Define this if you have an UBI volume that you want to use for the
+       environment.  This has the benefit of wear-leveling the environment
+       accesses, which is important on NAND.
+
+       - CONFIG_ENV_UBI_PART:
+
+         Define this to a string that is the mtd partition containing the UBI.
+
+       - CONFIG_ENV_UBI_VOLUME:
+
+         Define this to the name of the volume that you want to store the
+         environment in.
+
+       - CONFIG_ENV_UBI_VOLUME_REDUND:
+
+         Define this to the name of another volume to store a second copy of
+         the environment in.  This will enable redundant environments in UBI.
+         It is assumed that both volumes are in the same MTD partition.
+
+       - CONFIG_UBI_SILENCE_MSG
+       - CONFIG_UBIFS_SILENCE_MSG
+
+         You will probably want to define these to avoid a really noisy system
+         when storing the env in UBI.
+
+- CONFIG_ENV_IS_IN_MMC:
+
+       Define this if you have an MMC device which you want to use for the
+       environment.
+
+       - CONFIG_SYS_MMC_ENV_DEV:
+
+         Specifies which MMC device the environment is stored in.
+
+       - CONFIG_SYS_MMC_ENV_PART (optional):
+
+         Specifies which MMC partition the environment is stored in. If not
+         set, defaults to partition 0, the user area. Common values might be
+         1 (first MMC boot partition), 2 (second MMC boot partition).
+
+       - CONFIG_ENV_OFFSET:
+       - CONFIG_ENV_SIZE:
+
+         These two #defines specify the offset and size of the environment
+         area within the specified MMC device.
+
+         If offset is positive (the usual case), it is treated as relative to
+         the start of the MMC partition. If offset is negative, it is treated
+         as relative to the end of the MMC partition. This can be useful if
+         your board may be fitted with different MMC devices, which have
+         different sizes for the MMC partitions, and you always want the
+         environment placed at the very end of the partition, to leave the
+         maximum possible space before it, to store other data.
+
+         These two values are in units of bytes, but must be aligned to an
+         MMC sector boundary.
+
+       - CONFIG_ENV_OFFSET_REDUND (optional):
+
+         Specifies a second storage area, of CONFIG_ENV_SIZE size, used to
+         hold a redundant copy of the environment data. This provides a
+         valid backup copy in case the other copy is corrupted, e.g. due
+         to a power failure during a "saveenv" operation.
+
+         This value may also be positive or negative; this is handled in the
+         same way as CONFIG_ENV_OFFSET.
+
+         This value is also in units of bytes, but must also be aligned to
+         an MMC sector boundary.
+
+       - CONFIG_ENV_SIZE_REDUND (optional):
+
+         This value need not be set, even when CONFIG_ENV_OFFSET_REDUND is
+         set. If this value is set, it must be set to the same value as
+         CONFIG_ENV_SIZE.
+

 - CONFIG_SYS_SPI_INIT_OFFSET
 
        Defines offset to the initial SPI buffer area in DPRAM. The
 - CONFIG_SYS_SPI_INIT_OFFSET
 
        Defines offset to the initial SPI buffer area in DPRAM. The


@@ -3716,6 +3996,9 @@ Low Level (hardware related) configuration options:
                a second time.  Useful for platforms that are pre-booted
                by coreboot or similar.
 
                a second time.  Useful for platforms that are pre-booted
                by coreboot or similar.
 

+- CONFIG_PCI_INDIRECT_BRIDGE:
+               Enable support for indirect PCI bridges.
+

 - CONFIG_SYS_SRIO:
                Chip has SRIO or not
 
 - CONFIG_SYS_SRIO:
                Chip has SRIO or not
 


@@ -3725,6 +4008,9 @@ Low Level (hardware related) configuration options:
 - CONFIG_SRIO2:
                Board has SRIO 2 port available
 
 - CONFIG_SRIO2:
                Board has SRIO 2 port available
 

+- CONFIG_SRIO_PCIE_BOOT_MASTER
+               Board can support master function for Boot from SRIO and PCIE
+

 - CONFIG_SYS_SRIOn_MEM_VIRT:
                Virtual Address of SRIO port 'n' memory region
 
 - CONFIG_SYS_SRIOn_MEM_VIRT:
                Virtual Address of SRIO port 'n' memory region
 


@@ -3734,9 +4020,13 @@ Low Level (hardware related) configuration options:
 - CONFIG_SYS_SRIOn_MEM_SIZE:
                Size of SRIO port 'n' memory region
 
 - CONFIG_SYS_SRIOn_MEM_SIZE:
                Size of SRIO port 'n' memory region
 

-- CONFIG_SYS_NDFC_16
-               Defined to tell the NDFC that the NAND chip is using a
-               16 bit bus.
+- CONFIG_SYS_NAND_BUSWIDTH_16BIT
+               Defined to tell the NAND controller that the NAND chip is using
+               a 16 bit bus.
+               Not all NAND drivers use this symbol.
+               Example of drivers that use it:
+               - drivers/mtd/nand/ndfc.c
+               - drivers/mtd/nand/mxc_nand.c

 
 - CONFIG_SYS_NDFC_EBC0_CFG
                Sets the EBC0_CFG register for the NDFC. If not defined
 
 - CONFIG_SYS_NDFC_EBC0_CFG
                Sets the EBC0_CFG register for the NDFC. If not defined


@@ -3831,6 +4121,11 @@ Low Level (hardware related) configuration options:
                that is executed before the actual U-Boot. E.g. when
                compiling a NAND SPL.
 
                that is executed before the actual U-Boot. E.g. when
                compiling a NAND SPL.
 

+- CONFIG_SYS_MPC85XX_NO_RESETVEC
+               Only for 85xx systems. If this variable is specified, the section
+               .resetvec is not kept and the section .bootpg is placed in the
+               previous 4k of the .text section.
+

 - CONFIG_ARCH_MAP_SYSMEM
                Generally U-Boot (and in particular the md command) uses
                effective address. It is therefore not necessary to regard
 - CONFIG_ARCH_MAP_SYSMEM
                Generally U-Boot (and in particular the md command) uses
                effective address. It is therefore not necessary to regard


@@ -3850,6 +4145,10 @@ Low Level (hardware related) configuration options:
                If defined, the x86 reset vector code is included. This is not
                needed when U-Boot is running from Coreboot.
 
                If defined, the x86 reset vector code is included. This is not
                needed when U-Boot is running from Coreboot.
 

+- CONFIG_SYS_MPUCLK
+               Defines the MPU clock speed (in MHz).
+
+               NOTE : currently only supported on AM335x platforms.

 
 Freescale QE/FMAN Firmware Support:
 -----------------------------------
 
 Freescale QE/FMAN Firmware Support:
 -----------------------------------


@@ -4912,7 +5211,7 @@ On some platforms, it's possible to boot Linux zImage. This is done
 using the "bootz" command. The syntax of "bootz" command is the same
 as the syntax of "bootm" command.
 
 using the "bootz" command. The syntax of "bootz" command is the same
 as the syntax of "bootm" command.
 

-Note, defining the CONFIG_SUPPORT_INITRD_RAW allows user to supply
+Note, defining the CONFIG_SUPPORT_RAW_INITRD allows user to supply

 kernel with raw initrd images. The syntax is slightly different, the
 address of the initrd must be augmented by it's size, in the following
 format: "<initrd addres>:<initrd size>".
 kernel with raw initrd images. The syntax is slightly different, the
 address of the initrd must be augmented by it's size, in the following
 format: "<initrd addres>:<initrd size>".