compiler.h: remove duplicated uninitialized_var

[karo-tx-uboot.git] / README

diff --git a/README b/README
index 0a0f528af117e94f86918078b23b7ec8c5561f96..766e9e0ebd88f05741ea6cf34657ace277dd75d6 100644 (file)
--- a/README
+++ b/README
@@ -272,7 +272,7 @@ board. This allows feature development which is not board- or architecture-
 specific to be undertaken on a native platform. The sandbox is also used to
 run some of U-Boot's tests.
 
 specific to be undertaken on a native platform. The sandbox is also used to
 run some of U-Boot's tests.
 

-See board/sandbox/sandbox/README.sandbox for more details.
+See board/sandbox/README.sandbox for more details.

 
 
 Configuration Options:
 
 
 Configuration Options:


@@ -1629,6 +1629,16 @@ The following options need to be configured:
                downloads. This buffer should be as large as possible for a
                platform. Define this to the size available RAM for fastboot.
 
                downloads. This buffer should be as large as possible for a
                platform. Define this to the size available RAM for fastboot.
 

+               CONFIG_FASTBOOT_FLASH
+               The fastboot protocol includes a "flash" command for writing
+               the downloaded image to a non-volatile storage device. Define
+               this to enable the "fastboot flash" command.
+
+               CONFIG_FASTBOOT_FLASH_MMC_DEV
+               The fastboot "flash" command requires additional information
+               regarding the non-volatile storage device. Define this to
+               the eMMC device that fastboot should use to store the image.
+

 - Journaling Flash filesystem support:
                CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
                CONFIG_JFFS2_NAND_DEV
 - Journaling Flash filesystem support:
                CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
                CONFIG_JFFS2_NAND_DEV


@@ -3849,12 +3859,9 @@ Configuration Settings:
                The memory will be freed (or in fact just forgotton) when
                U-Boot relocates itself.
 
                The memory will be freed (or in fact just forgotton) when
                U-Boot relocates itself.
 

-               Pre-relocation malloc() is only supported on sandbox
+               Pre-relocation malloc() is only supported on ARM and sandbox

                at present but is fairly easy to enable for other archs.
 
                at present but is fairly easy to enable for other archs.
 

-               Pre-relocation malloc() is only supported on ARM at present
-               but is fairly easy to enable for other archs.
-

 - CONFIG_SYS_BOOTM_LEN:
                Normally compressed uImages are limited to an
                uncompressed size of 8 MBytes. If this is not enough,
 - CONFIG_SYS_BOOTM_LEN:
                Normally compressed uImages are limited to an
                uncompressed size of 8 MBytes. If this is not enough,