powerpc/corenet_ds: Update README and README.srio-pcie-boot-corenet

[karo-tx-uboot.git] / README

diff --git a/README b/README
index 79016e690ace8899488e54ee7a35e1715018e9a2..81ee7d4d7374bac9306d5ba3ee39766d43b54e99 100644 (file)
--- a/README
+++ b/README
@@ -374,6 +374,15 @@ The following options need to be configured:
                Defines the string to utilize when trying to match PCIe device
                tree nodes for the given platform.
 
                Defines the string to utilize when trying to match PCIe device
                tree nodes for the given platform.
 

+               CONFIG_SYS_PPC_E500_DEBUG_TLB
+
+               Enables a temporary TLB entry to be used during boot to work
+               around limitations in e500v1 and e500v2 external debugger
+               support. This reduces the portions of the boot code where
+               breakpoints and single stepping do not work.  The value of this
+               symbol should be set to the TLB1 entry to be used for this
+               purpose.
+

 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 


@@ -432,6 +441,14 @@ The following options need to be configured:
                Select high exception vectors of the ARM core, e.g., do not
                clear the V bit of the c1 register of CP15.
 
                Select high exception vectors of the ARM core, e.g., do not
                clear the V bit of the c1 register of CP15.
 

+               CONFIG_SYS_THUMB_BUILD
+
+               Use this flag to build U-Boot using the Thumb instruction
+               set for ARM architectures. Thumb instruction set provides
+               better code density. For ARM architectures that support
+               Thumb2 this flag will result in Thumb2 code generated by
+               GCC.
+

 - Linux Kernel Interface:
                CONFIG_CLOCKS_IN_MHZ
 
 - Linux Kernel Interface:
                CONFIG_CLOCKS_IN_MHZ
 


@@ -777,6 +794,8 @@ The following options need to be configured:
                CONFIG_CMD_JFFS2        * JFFS2 Support
                CONFIG_CMD_KGDB         * kgdb
                CONFIG_CMD_LDRINFO        ldrinfo (display Blackfin loader)
                CONFIG_CMD_JFFS2        * JFFS2 Support
                CONFIG_CMD_KGDB         * kgdb
                CONFIG_CMD_LDRINFO        ldrinfo (display Blackfin loader)

+               CONFIG_CMD_LINK_LOCAL   * link-local IP address auto-configuration
+                                         (169.254.*.*)

                CONFIG_CMD_LOADB          loadb
                CONFIG_CMD_LOADS          loads
                CONFIG_CMD_MD5SUM         print md5 message digest
                CONFIG_CMD_LOADB          loadb
                CONFIG_CMD_LOADS          loads
                CONFIG_CMD_MD5SUM         print md5 message digest


@@ -1584,10 +1603,17 @@ The following options need to be configured:
                CONFIG_BOOTP_NTPSERVER
                CONFIG_BOOTP_TIMEOFFSET
                CONFIG_BOOTP_VENDOREX
                CONFIG_BOOTP_NTPSERVER
                CONFIG_BOOTP_TIMEOFFSET
                CONFIG_BOOTP_VENDOREX

+               CONFIG_BOOTP_MAY_FAIL

 
                CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip
                environment variable, not the BOOTP server.
 
 
                CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip
                environment variable, not the BOOTP server.
 

+               CONFIG_BOOTP_MAY_FAIL - If the DHCP server is not found
+               after the configured retry count, the call will fail
+               instead of starting over.  This can be used to fail over
+               to Link-local IP address configuration if the DHCP server
+               is not available.
+

                CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS
                serverip from a DHCP server, it is possible that more
                than one DNS serverip is offered to the client.
                CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS
                serverip from a DHCP server, it is possible that more
                than one DNS serverip is offered to the client.


@@ -1618,6 +1644,14 @@ The following options need to be configured:
                the DHCP timeout and retry process takes a longer than
                this delay.
 
                the DHCP timeout and retry process takes a longer than
                this delay.
 

+ - Link-local IP address negotiation:
+               Negotiate with other link-local clients on the local network
+               for an address that doesn't require explicit configuration.
+               This is especially useful if a DHCP server cannot be guaranteed
+               to exist in all environments that the device must operate.
+
+               See doc/README.link-local for more information.
+

  - CDP Options:
                CONFIG_CDP_DEVICE_ID
 
  - CDP Options:
                CONFIG_CDP_DEVICE_ID
 


@@ -2115,6 +2149,13 @@ The following options need to be configured:
 
                Timeout waiting for an ARP reply in milliseconds.
 
 
                Timeout waiting for an ARP reply in milliseconds.
 

+               CONFIG_NFS_TIMEOUT
+
+               Timeout in milliseconds used in NFS protocol.
+               If you encounter "ERROR: Cannot umount" in nfs command,
+               try longer timeout such as
+               #define CONFIG_NFS_TIMEOUT 10000UL
+

 - Command Interpreter:
                CONFIG_AUTO_COMPLETE
 
 - Command Interpreter:
                CONFIG_AUTO_COMPLETE
 


@@ -2195,6 +2236,20 @@ The following options need to be configured:
                the environment like the "source" command or the
                boot command first.
 
                the environment like the "source" command or the
                boot command first.
 

+               CONFIG_ENV_VARS_UBOOT_CONFIG
+
+               Define this in order to add variables describing the
+               U-Boot build configuration to the default environment.
+               These will be named arch, cpu, board, vendor, and soc.
+
+               Enabling this option will cause the following to be defined:
+
+               - CONFIG_SYS_ARCH
+               - CONFIG_SYS_CPU
+               - CONFIG_SYS_BOARD
+               - CONFIG_SYS_VENDOR
+               - CONFIG_SYS_SOC
+

 - DataFlash Support:
                CONFIG_HAS_DATAFLASH
 
 - DataFlash Support:
                CONFIG_HAS_DATAFLASH
 


@@ -3037,12 +3092,12 @@ to save the current settings.
          These two #defines specify the address and size of the
          environment area within the remote memory space. The
          local device can get the environment from remote memory
          These two #defines specify the address and size of the
          environment area within the remote memory space. The
          local device can get the environment from remote memory

-         space by SRIO or other links.
+         space by SRIO or PCIE links.

 
 BE CAREFUL! For some special cases, the local device can not use
 "saveenv" command. For example, the local device will get the
 
 BE CAREFUL! For some special cases, the local device can not use
 "saveenv" command. For example, the local device will get the

-environment stored in a remote NOR flash by SRIO link, but it can
-not erase, write this NOR flash by SRIO interface.
+environment stored in a remote NOR flash by SRIO or PCIE link,
+but it can not erase, write this NOR flash by SRIO or PCIE interface.

 
 - CONFIG_ENV_IS_IN_NAND:
 
 
 - CONFIG_ENV_IS_IN_NAND:
 


@@ -3483,9 +3538,9 @@ within that device.
 - CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
        Specifies that QE/FMAN firmware is located in the remote (master)
        memory space.   CONFIG_SYS_FMAN_FW_ADDR is a virtual address which
 - CONFIG_SYS_QE_FMAN_FW_IN_REMOTE
        Specifies that QE/FMAN firmware is located in the remote (master)
        memory space.   CONFIG_SYS_FMAN_FW_ADDR is a virtual address which

-       can be mapped from slave TLB->slave LAW->slave SRIO outbound window
-       ->master inbound window->master LAW->the ucode address in master's
-       NOR flash.
+       can be mapped from slave TLB->slave LAW->slave SRIO or PCIE outbound
+       window->master inbound window->master LAW->the ucode address in
+       master's memory space.

 
 Building the Software:
 ======================
 
 Building the Software:
 ======================