Changes since U-Boot 1.1.1:
======================================================================
+* Enable NAND flash support for NC650 board.
+
+* Patch by Thomas Lange 07 Oct 2004:
+ Updated README for DBAu1x00 boards to match current status
+
+* Patch by Philippe Robin, 28 Sept 2004:
+ Fix Flash support for Versatile.
+
+* Patch by Roger Blofeld, 16 Sep 2004:
+ Fix timeout for DHCP command retry
+
+* Patch by Pantelis Antoniou, 14 Sep 2004:
+ Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
+
+* Patch by Pantelis Antoniou, 14 Sep 2004:
+ Kick watchdog when bz-decompressing
+
+* Fix CFG_HZ problems on AT91RM9200 systems
+ [Remember: CFG_HZ should be 1000 on ALL systems!]
+
+* Patch by Gridish Shlomi, 30 Aug 2004:
+ - Add support to revA version of PQ27 and PQ27E.
+ - Reverted MPC8260ADS baudrate back to original 115200
+
+* Patch by Hojin, 17 Sep 2004:
+ Fix typo in cfi_flash.c
+
+* Patch by Mark Jonas, 09 September 2004:
+ mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
+ error message
+
+* Patch by Mark Jonas, 31 August 2004:
+ Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
+ improves FTP performance for MPC5200 systems. Enabled for IceCube
+ by default.
+
+* Patch by Michael Bendzick, 30 Aug 2004:
+ - Improve platform.S code for omap1510inn that detects whether code
+ is running from SDRAM or not. Patch allows SDRAM to be configured
+ if code is running out of SRAM at 0x20000000.
+
+* Patch by Frederick Klatt, 30 Aug 2004:
+ Add support for the Wind River SBC8540/SBC8560 boards
+
+* Configure SX1 board to use drivers/cfi_flash.c
+
+* Patches by Michael Bendzick, 30 Aug 2004:
+ - Configure omap1510inn board to use drivers/cfi_flash.c
+ - Make drivers/cfi_flash.c protect environment and redundant
+ environment.
+
+* Patch by Steven Scholz, 23 Jun 2004:
+ - Add script (tools/img2brec.sh) to programm U-Boot into
+ (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
+
+* Patches by Scott McNutt, 24 Aug 2004:
+ - Add support for Altera Nios-II processors.
+ - Add support for Psyent PCI-5441 board.
+ - Add support for Psyent PK1C20 board.
+
+* Patches by Jon Loeliger, 24 Aug 2004:
+ - Add support for the MPC8541 and MPC8555 CDS boards
+ - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
+ - Convert MPC85xxADS to use common CFI flash driver
+ - Fix PCI window on MPC85xx; remove unneeded PCI initialization
+ from board_early_init_f()
+ - Provide SW workaround for PCI initialization on 85xx CDS
+
+* Patches by George G. Davis, 24 Aug 2004:
+ - Enable ramdisk/initrd tagged param support for omap1610h2_config
+ - Remove static network setup defaults from mx1ads_config
+ - update ARM boards to use constants from mach-types.h
+
+* Patch by Gary Jennejohn, 04 Oct 2004:
+ - fix I2C on at91rm9200
+ - add support for Ricoh RS5C372A RTC
+
+* Patch by Gary Jennejohn, 01 Oct 2004:
+ - add support for CMC PU2 board
+ - add support for I2C on at91rm9200
+
+* Patch by Gary Jennejohn, 28 Sep 2004:
+ fix baudrate handling on at91rm9200
+
+* Patch by Yuli Barcohen, 22 Aug 2004:
+ - remove ZPC.1900 board-specific flash driver;
+ switch the port to generic CFI driver;
+ - port clean-up
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+ Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
+
+* Clean up tools/bmp_logo.c to not add trailing white space
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+ - Group common framebuffer functions in common/lcd.c
+ - Group common framebuffer macros and #defines in include/lcd.h
+ - Provide calc_fbsize() for video ATAG
+
+* Patch by Sam Song, 21 August 2004:
+ - Fix a typo in README
+ - Align "(RO)" output for "flinfo" after "protect on"
+ - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
+ ratio 1:1 when core frequency less than 50MHz
+
+* Patches by Hinko Kocevar, 21 Aug 2004:
+ - fix some "use of label at end of compound statement" warnings
+ - Define type of LCD panel on lubbock board if CONFIG_LCD is used
+
+* Patch by Steven Scholz, 16 Aug 2004:
+ - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
+ - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
+ - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
+ - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
+ into cpu/arm920t/$(SOC)/
+
+* Patches by Sean Chang, 09 Aug 2004:
+ - Added support for both 8 and 16 bit mode access to System ACE CF
+ through MPU.
+ - Fixed missing System ACE CF device during get FAT partition info
+ in fat_register_device function.
+ - Enabled System ACE CF support on ML300.
+
+* Patch by Sean Chang, 09 Aug 2004:
+ Synch defines for saveenv and do_saveenv functions so they get
+ compiled under the same statement.
+
+* Patch by Sean Chang, 09 Aug 2004:
+ - Added I2C support for ML300.
+ - Added support for ML300 to read out its environment information
+ stored on the EEPROM.
+ - Added support to use board specific parameters as part of
+ U-Boot's environment information.
+ - Updated MLD files to support configuration for new features
+ above.
+
+* Patches by Travis Sawyer, 05 Aug 2004:
+ - Remove incorrect bridge settings for eth group 6
+ - Add call to setup bridge in ppc_440x_eth_initialize
+ - Fix ppc_440x_eth_init to reset the phy only if its the
+ first time through, otherwise, just check the phy for the
+ autonegotiated speed/duplex. This allows the use of netconsole
+ - only print the speed/duplex the first time the phy is reset.
+
+* Patch by Shlomo Kut, 29 Mar 2004:
+ Add support for MKS Instruments "Quantum" board
+
+* Fix build problem with Cogent boards;
+ avoid using <asm/byteorder.h> when using the host compiler
+
+* Patch by Ganapathi C, 04 Aug 2004:
+ Fix NFS timeout issue
+
+* Patch by Yuli Barcohen, 19 Jul 2004:
+ - Fix host tools building in Cygwin environment
+ - Fix header files search order for host tools
+
+* Patch by Tom Armistead, 19 Jul 2004:
+ Fix kgdb.S support for 74xx_75x cpu
+
+* Patch by Jon Loeliger, 15 Jul 2004:
+ Fix MPC85xx I2C driver
+
+* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
+
+* Patch by Stephen Williams, 15 July 2004
+ Set the PCI class code for JSE board as part of PCI interface setup
+
+* Patch by Michael Bendzick, 15 Jul 2004:
+ Fix problem with writes with odd sizes in drivers/cfi_flash.c when
+ CFG_FLASH_USE_BUFFER_WRITE is set
+
+* Patch by Yuli Barcohen, 13 Jul 2004:
+ Allow clock setting on MPC866/MPC885 series chips according to
+ environment variable `cpuclk'
+
+* Patch by Yuli Barcohen, 20 Apr 2004:
+ Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
+
+* Patch by Vincent Dubey, 24 Sep 2004:
+ Add support for xaeniax board
+
+* Add comment about non-GPL character of standalone applications to
+ COPYING file
+
+* Fix FEC ethernet problem on NSCU board.
+
+* Patch by Gary Jennejohn, 09 Sep 2004:
+ allow to use USART1 as console port on at91rm9200dk boards
+
+* Patch by Stefan Roese, 16 Sep 2004:
+ Update AR405 board.
+
+* Fix SysClk handling for PPChameleon and CATcenter boards
+
+* Patch by Detlev Zundel, 08 Sep 2004:
+ Update etags build target
+
+* Improve NetConsole support: add support for broadcast destination
+ address and buffered input.
+
+* Cleanup compiler warnings for GCC 3.3.x and later
+
+* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
+
+* Add support for IDS "NC650" board
+
* Add automatic update support for LWMON board
* Clear Block Lock-Bits when erasing flash on LWMON board.
* Patch by Mark Jonas, 13 July 2004:
- Total5200 LCD now run in little endian mode. Endianess conversion
is done in hardware.
- - Removed last reference to "console" environment variable.
+ - Removed last reference to "console" environment variable.
* Patches by Lars Munch, 12 Jul 2004:
- move at45.c to board/at91rm9200dk/ since this is at91rm9200dk