Changes since U-Boot 1.1.1:
======================================================================
+* Enable NAND flash support for NC650 board.
+
+* Patch by Thomas Lange 07 Oct 2004:
+ Updated README for DBAu1x00 boards to match current status
+
+* Patch by Philippe Robin, 28 Sept 2004:
+ Fix Flash support for Versatile.
+
+* Patch by Roger Blofeld, 16 Sep 2004:
+ Fix timeout for DHCP command retry
+
+* Patch by Pantelis Antoniou, 14 Sep 2004:
+ Fix early serial hang when CONFIG_SERIAL_MULTI is defined.
+
+* Patch by Pantelis Antoniou, 14 Sep 2004:
+ Kick watchdog when bz-decompressing
+
+* Fix CFG_HZ problems on AT91RM9200 systems
+ [Remember: CFG_HZ should be 1000 on ALL systems!]
+
+* Patch by Gridish Shlomi, 30 Aug 2004:
+ - Add support to revA version of PQ27 and PQ27E.
+ - Reverted MPC8260ADS baudrate back to original 115200
+
+* Patch by Hojin, 17 Sep 2004:
+ Fix typo in cfi_flash.c
+
+* Patch by Mark Jonas, 09 September 2004:
+ mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong
+ error message
+
+* Patch by Mark Jonas, 31 August 2004:
+ Added option CFG_XLB_PIPELINING to enable XLB pipelining. This
+ improves FTP performance for MPC5200 systems. Enabled for IceCube
+ by default.
+
+* Patch by Michael Bendzick, 30 Aug 2004:
+ - Improve platform.S code for omap1510inn that detects whether code
+ is running from SDRAM or not. Patch allows SDRAM to be configured
+ if code is running out of SRAM at 0x20000000.
+
+* Patch by Frederick Klatt, 30 Aug 2004:
+ Add support for the Wind River SBC8540/SBC8560 boards
+
+* Configure SX1 board to use drivers/cfi_flash.c
+
+* Patches by Michael Bendzick, 30 Aug 2004:
+ - Configure omap1510inn board to use drivers/cfi_flash.c
+ - Make drivers/cfi_flash.c protect environment and redundant
+ environment.
+
+* Patch by Steven Scholz, 23 Jun 2004:
+ - Add script (tools/img2brec.sh) to programm U-Boot into
+ (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L
+
+* Patches by Scott McNutt, 24 Aug 2004:
+ - Add support for Altera Nios-II processors.
+ - Add support for Psyent PCI-5441 board.
+ - Add support for Psyent PK1C20 board.
+
+* Patches by Jon Loeliger, 24 Aug 2004:
+ - Add support for the MPC8541 and MPC8555 CDS boards
+ - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR
+ - Convert MPC85xxADS to use common CFI flash driver
+ - Fix PCI window on MPC85xx; remove unneeded PCI initialization
+ from board_early_init_f()
+ - Provide SW workaround for PCI initialization on 85xx CDS
+
+* Patches by George G. Davis, 24 Aug 2004:
+ - Enable ramdisk/initrd tagged param support for omap1610h2_config
+ - Remove static network setup defaults from mx1ads_config
+ - update ARM boards to use constants from mach-types.h
+
+* Patch by Gary Jennejohn, 04 Oct 2004:
+ - fix I2C on at91rm9200
+ - add support for Ricoh RS5C372A RTC
+
+* Patch by Gary Jennejohn, 01 Oct 2004:
+ - add support for CMC PU2 board
+ - add support for I2C on at91rm9200
+
+* Patch by Gary Jennejohn, 28 Sep 2004:
+ fix baudrate handling on at91rm9200
+
+* Patch by Yuli Barcohen, 22 Aug 2004:
+ - remove ZPC.1900 board-specific flash driver;
+ switch the port to generic CFI driver;
+ - port clean-up
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+ Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
+
+* Clean up tools/bmp_logo.c to not add trailing white space
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+ - Group common framebuffer functions in common/lcd.c
+ - Group common framebuffer macros and #defines in include/lcd.h
+ - Provide calc_fbsize() for video ATAG
+
+* Patch by Sam Song, 21 August 2004:
+ - Fix a typo in README
+ - Align "(RO)" output for "flinfo" after "protect on"
+ - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
+ ratio 1:1 when core frequency less than 50MHz
+
+* Patches by Hinko Kocevar, 21 Aug 2004:
+ - fix some "use of label at end of compound statement" warnings
+ - Define type of LCD panel on lubbock board if CONFIG_LCD is used
+
+* Patch by Steven Scholz, 16 Aug 2004:
+ - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
+ - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
+ - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
+ - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
+ into cpu/arm920t/$(SOC)/
+
+* Patches by Sean Chang, 09 Aug 2004:
+ - Added support for both 8 and 16 bit mode access to System ACE CF
+ through MPU.
+ - Fixed missing System ACE CF device during get FAT partition info
+ in fat_register_device function.
+ - Enabled System ACE CF support on ML300.
+
+* Patch by Sean Chang, 09 Aug 2004:
+ Synch defines for saveenv and do_saveenv functions so they get
+ compiled under the same statement.
+
+* Patch by Sean Chang, 09 Aug 2004:
+ - Added I2C support for ML300.
+ - Added support for ML300 to read out its environment information
+ stored on the EEPROM.
+ - Added support to use board specific parameters as part of
+ U-Boot's environment information.
+ - Updated MLD files to support configuration for new features
+ above.
+
+* Patches by Travis Sawyer, 05 Aug 2004:
+ - Remove incorrect bridge settings for eth group 6
+ - Add call to setup bridge in ppc_440x_eth_initialize
+ - Fix ppc_440x_eth_init to reset the phy only if its the
+ first time through, otherwise, just check the phy for the
+ autonegotiated speed/duplex. This allows the use of netconsole
+ - only print the speed/duplex the first time the phy is reset.
+
+* Patch by Shlomo Kut, 29 Mar 2004:
+ Add support for MKS Instruments "Quantum" board
+
+* Fix build problem with Cogent boards;
+ avoid using <asm/byteorder.h> when using the host compiler
+
+* Patch by Ganapathi C, 04 Aug 2004:
+ Fix NFS timeout issue
+
+* Patch by Yuli Barcohen, 19 Jul 2004:
+ - Fix host tools building in Cygwin environment
+ - Fix header files search order for host tools
+
+* Patch by Tom Armistead, 19 Jul 2004:
+ Fix kgdb.S support for 74xx_75x cpu
+
+* Patch by Jon Loeliger, 15 Jul 2004:
+ Fix MPC85xx I2C driver
+
+* Fix problems with CDROM drive as slave device on Lite5200 IDE bus.
+
+* Patch by Stephen Williams, 15 July 2004
+ Set the PCI class code for JSE board as part of PCI interface setup
+
+* Patch by Michael Bendzick, 15 Jul 2004:
+ Fix problem with writes with odd sizes in drivers/cfi_flash.c when
+ CFG_FLASH_USE_BUFFER_WRITE is set
+
+* Patch by Yuli Barcohen, 13 Jul 2004:
+ Allow clock setting on MPC866/MPC885 series chips according to
+ environment variable `cpuclk'
+
+* Patch by Yuli Barcohen, 20 Apr 2004:
+ Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x
+
+* Patch by Vincent Dubey, 24 Sep 2004:
+ Add support for xaeniax board
+
+* Add comment about non-GPL character of standalone applications to
+ COPYING file
+
+* Fix FEC ethernet problem on NSCU board.
+
+* Patch by Gary Jennejohn, 09 Sep 2004:
+ allow to use USART1 as console port on at91rm9200dk boards
+
+* Patch by Stefan Roese, 16 Sep 2004:
+ Update AR405 board.
+
+* Fix SysClk handling for PPChameleon and CATcenter boards
+
+* Patch by Detlev Zundel, 08 Sep 2004:
+ Update etags build target
+
+* Improve NetConsole support: add support for broadcast destination
+ address and buffered input.
+
+* Cleanup compiler warnings for GCC 3.3.x and later
+
+* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch
+
+* Add support for IDS "NC650" board
+
+* Add automatic update support for LWMON board
+
+* Clear Block Lock-Bits when erasing flash on LWMON board.
+
+* Fix return code of "fatload" command
+
+* Enable MSDOS/VFAT filesystem support for LWMON board
+
+* Patch by Martin Krause, 03 Aug 2004:
+ change timing for SM501 graphics controller on TQM5200 module
+
+* Patch by Mark Jonas, 13 July 2004:
+ - Total5200 LCD now run in little endian mode. Endianess conversion
+ is done in hardware.
+ - Removed last reference to "console" environment variable.
+
+* Patches by Lars Munch, 12 Jul 2004:
+ - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk
+ board specific
+ - split out the LXT971A PHY from ns_9750_eth.h
+ - split the dm9161 phy part out of at91rm9200_ether.c
+
+* Patch by Andreas Engel, 12 Jul 2004:
+ Replaced hardcoded PL011 clock frequency with config variable.
+ Fixed wrong CONFIG_CMD_DFL doc.
+
+* Patch by Thomas Viehweger, 09 Jun 2004:
+ make it possible to remove chpart when there is only one partition
+
+* Add support for console over UDP (compatible to Ingo Molnar's
+ netconsole patch under Linux)
+
+* Patch by Jon Loeliger, 16 Jul 2004:
+ - support larger DDR memories up to 2G on the PC8540/8560ADS and
+ STXGP3 boards
+ - Made MPC8540/8560ADS be 33Mhz PCI by default.
+ - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16
+ and CONFIG_L2_INIT_RAM options.
+ - Refactor Local Bus initialization out of SDRAM setup.
+ - Re-implement new version of LBC11/DDR11 errata workarounds.
+ - Moved board specific PCI init parts out of CPU directory.
+ - Added TLB entry for PCI-1 IO Memory
+ - Updated README.mpc85xxads
+
+* Patch by Sascha Hauer, 28 Jun:
+ - add generic support for Motorola i.MX architecture
+ - add support for mx1ads, mx1fs2 and scb9328 boards
+
+* Patches by Marc Leeman, 23 Jul 2004:
+ - Add define for the PCI/Memory Buffer Configuration Register
+ - corrected comments in cpu/mpc824x/cpu_init.c
+
+* Add support for multiple serial interfaces
+ (for example to allow modem dial-in / dial-out)
+
+* Patch by Stefan Roese, 15 Jul 2004:
+ cpu/ppc4xx/sdram.c rewritten now using get_ram_size()
+
+* Fix NSCU config; add ethernet wakeup code.
+
+* Add link for preloader for Motorola Coldfire to README.m68k
+
+* Patch by Michael Bendzick, 12 Jul 2004:
+ fix output formatting in drivers/cfi_flash.c
+
+* Patch by Mark Jonas, 02 Jul 2004:
+ Fix lowboot (again) on MPC5xxx
+
+* Patch by Curt Brune, 07 Jul 2004:
+ relocate exception vectors on arm720t if needed
+
+* Patch by George G. Davis, 06 Jul 2004:
+ - update mach-types.h to latest arm.linux.org.uk master list
+ - Set correct OMAP1610 bi_arch_number for build target
+
+* Patch by Curt Brune, 06 Jul 2004:
+ evb4510: add support for timer interrupt; cleanup
+
+* Patch by Dan Poirot, 06 Jul 2004:
+ Fix sbc8260 environment variables
+
+* Cleanup redundand "console" environment variable
+
+* Patch by Mark Jonas, 05 Jul 2004:
+ add support for the Total5100's and Total5200's LCD screen
+
+* Patches by Dan Eisenhut, 01 Jul 2004:
+ - README fixes.
+ - Move doc2000.h include to prevent compiler warning on some boards
+
+* Patch by Mark Jonas, 01 Jul 2004:
+ Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
+ MGT5100 and MPC5200 based Freescale platforms.
+
+* Patch by Philippe Robin, 01 Jul 2004:
+ Add initialization for Integrator and versatile board files.
+
+* Patch by Hinko Kocevar, 01 Jun 2004:
+ Fix VFD FB allocation, add LCD FB allocation on ARM
+
+* Patch by Martin Krause, 30 Jun 2004:
+ Add support for TQM5200 board
+
+* Patch by Martin Krause, 29 Jun 2004:
+ Add loopw command: infinite write loop on address range
+
+* Patches by Yasushi Shoji, 29 Jun 2004:
+ - add empty include/asm-microblaze/processor.h
+ - add to CREDITS and MAINTAINERS
+ - add gd initialization
+ - add MicroBlaze and SUZAKU board to MAKEALL script
+ - add reset support for SUZAKU
+ - add flush_cache() for MicroBlaze
+ - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed
+ size flash memory on SUZAKU
+
+* Patch by Prakash Kumar, 27 Jun 2004:
+ Add support for the PXA250 based Intrinsyc Cerf board.
+
+* Patch by Yasushi Shoji, 27 Jun 2004:
+ fix comment in include/common.h
+
+* Rename SBC8560 into sbc8560 for consistency
+
+* Patch by Daniel Poirot, 24 Jun 2004:
+ Add support for Wind River's sbc8240 board
+
+* Patches by Yasushi Shoji, 26 Jun 2004:
+ - drivers/serial_xuartlite.c: fix "return 0" in void function
+ - add microblaze support to mkimage tool
+
+* Patch by Fred Klatt, 25 Jun 2004:
+ Add support for WindRiver's sbc8560 board
+
+* Patch by Nicolas Lacressonniere, 24 Jun 2004
+ Small Bugs fixes for "at91rm9200dk" board:
+ - Timing modifications for SPI DataFlash access
+ - Fix NAND flash detection bug
+
+* Patch by Nicolas Lacressonniere, 24 Jun 2004:
+ Add Support for Flash AT49BV6416 for AT91RM9200DK board
+
+* Patch by Jon Loeliger, 17 June 2004:
+ Completion of the 8540ADS/8560ADS updates:
+ Fix some PCI and Rapid I/O memory maps,
+ Initialize both TSEC 1 and 2,
+ Initialize SDRAM
+ Update MAINTAINER for 85xx boards and README.mpc85xxads
+
+* Patch by Yuli Barcohen, 16 Jun 2004:
+ Remove obsolete AdderII port which was superseded by unified
+ AdderII/Adder87x port
+
+* Patch by Ladislav Michl, 16 Jun 2004:
+ Fix gcc-3.3.3 warnings for smc91111.c
+
+* Patch by Stefan Roese, 02 Jul 2004:
+ - Fix bug in 405 ethernet driver; allocated data not cleared!
+ - Fix problem in 405 i2c driver; don't try to print without console!
+
+* Patch by Paul Ruhland, 11 Jun 2004:
+ Remove debug code from 'board/lpd7a40x/flash.c'
+
+* Patch by Andrea Marson, 11 Jun 2004:
+ Update for PPChameleon board:
+ - support for SysClk @ 25MHz
+ - support for Silicon Motion SM712 VGA controller
+ - some clean ups
+
+* Patches by Richard Woodruff, 10 Jun 2004:
+ - fix problems with examples/stubs.c for GCC >= 3.4
+ - fix problems with gd initialization
+
+* Patch by Curt Brune, 17 May 2004:
+ - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
+ - Add support for ESPD-Inc. EVB4510 Board
+
+* Patch by Marc Leeman, 11 May 2004:
+ Fix for MPC8245 - reading PPC Memory from another device with the
+ PPC as PCI target device corrupts data due to interenal hardware
+ buffering.
+
+* Fix "cls" command when used with splash screen
+
+* Increase NFS download timeout (now 1 min - 10 sec is to short for a
+ slow download of a big image)
+
+* Add "cls" function to MPC823 LCD driver so we can reinitialize the
+ display even after showing a bitmap
+
+* Patch by Josef Wagner, 04 Jun 2004:
+ - DDR Ram support for PM520 (MPC5200)
+ - support for different flash types (PM520)
+ - USB / IDE / CF-Card / DiskOnChip support for PM520
+ - 8 bit boot rom support for PM520/CE520
+ - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245)
+ - I2C and RTC support for CPC45
+ - support of new flash type (28F160C3T) for CPC45
+
+* Fix flash parameters passed to Linux for PPChameleon board
+
+* Remove eth_init() from lib_arm/board.c; it's done in net.net.c.
+
+* Patch by Paul Ruhland, 10 Jun 2004:
+ fix support for Logic SDK-LH7A404 board and clean up the
+ LH7A404 register macros.
+
+* Patch by Matthew McClintock, 10 Jun 2004:
+ Modify code to select correct serial clock on Sandpoint8245
+
+* Patch by Robert Schwebel, 10 Jun 2004:
+ Add support for Intel K3 strata flash.
+
+* Patch by Thomas Brand, 10 Jun 2004:
+ Fix "loads" command on DK1S10 board
+
* Patch by Yuli Barcohen, 09 Jun 2004:
Add support for 8MB flash SIMM and JFFS2 file system on
Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS).