Patch by George G. Davis, 24 Aug 2004:

[karo-tx-uboot.git] / CHANGELOG

diff --git a/CHANGELOG b/CHANGELOG
index d9aed9eaef48b8aecded9ff29c6cb5d1237db35e..89375c91bca6b72c0d458b909a8d720561e92ac8 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,80 @@
 Changes since U-Boot 1.1.1:
 ======================================================================
 
+* Patch by George G. Davis, 24 Aug 2004:
+  - update ARM boards to use constants from mach-types.h
+
+* Patch by Gary Jennejohn, 04 Oct 2004:
+  - fix I2C on at91rm9200
+  - add support for Ricoh RS5C372A RTC
+
+* Patch by Gary Jennejohn, 01 Oct 2004:
+  - add support for CMC PU2 board
+  - add support for I2C on at91rm9200
+
+* Patch by Gary Jennejohn, 28 Sep 2004:
+  fix baudrate handling on at91rm9200
+
+* Patch by Yuli Barcohen, 22 Aug 2004:
+  - remove ZPC.1900 board-specific flash driver;
+    switch the port to generic CFI driver;
+  - port clean-up
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+  Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB
+
+* Clean up tools/bmp_logo.c to not add trailing white space
+
+* Patch by Hinko Kocevar, 21 Aug 2004:
+  - Group common framebuffer functions in common/lcd.c
+  - Group common framebuffer macros and #defines in include/lcd.h
+  - Provide calc_fbsize() for video ATAG
+
+* Patch by Sam Song, 21 August 2004:
+  - Fix a typo in README
+  - Align "(RO)" output for "flinfo" after "protect on"
+  - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency
+    ratio 1:1 when core frequency less than 50MHz
+
+* Patches by Hinko Kocevar, 21 Aug 2004:
+  - fix some "use of label at end of compound statement" warnings
+  - Define type of LCD panel on lubbock board if CONFIG_LCD is used
+
+* Patch by Steven Scholz, 16 Aug 2004:
+  - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)"
+  - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0
+  - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/
+  - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/
+    into cpu/arm920t/$(SOC)/
+
+* Patches by Sean Chang, 09 Aug 2004:
+  - Added support for both 8 and 16 bit mode access to System ACE CF
+    through MPU.
+  - Fixed missing System ACE CF device during get FAT partition info
+    in fat_register_device function.
+  - Enabled System ACE CF support on ML300.
+
+* Patch by Sean Chang, 09 Aug 2004:
+  Synch defines for saveenv and do_saveenv functions so they get
+  compiled under the same statement.
+
+* Patch by Sean Chang, 09 Aug 2004:
+  - Added I2C support for ML300.
+  - Added support for ML300 to read out its environment information
+    stored on the EEPROM.
+  - Added support to use board specific parameters as part of
+    U-Boot's environment information.
+  - Updated MLD files to support configuration for new features
+    above.
+
+* Patches by Travis Sawyer, 05 Aug 2004:
+  - Remove incorrect bridge settings for eth group 6
+  - Add call to setup bridge in ppc_440x_eth_initialize
+  - Fix ppc_440x_eth_init to reset the phy only if its the
+    first time through, otherwise, just check the phy for the
+    autonegotiated speed/duplex.  This allows the use of netconsole
+  - only print the speed/duplex the first time the phy is reset.
+
 * Patch by Shlomo Kut, 29 Mar 2004:
   Add support for MKS Instruments "Quantum" board