+commit 3a76ab5c166d5956885f803ce975e7151cc0ca0e
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Jun 10 00:15:11 2009 +0200
+
+ rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 165f9859b64ff59f0cfae3cc70a7e7ded7aaa4a7
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Thu Jun 4 19:44:12 2009 +0200
+
+ ubifs: fix small error path mismatch
+
+ In do_readpage(), don't free 'dn' if its allocation failed.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+
+commit de7cf709ebd3c01fbd094e8853dabb410c0370a1
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Jun 4 00:31:07 2009 +0200
+
+ EP88x: fix broken linker script
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Tested-by: Mikhail Zaturenskiy <mzaturenskiy@shoppertrak.com>
+
+commit 7a2063bd80d3b58b2dd5d5e58f4411f8d250576c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 00:16:02 2009 +0200
+
+ TQM85xx: minor config file cleanup
+
+ Remove "saveenv" from "update" definition: the environment is outside
+ the U-Boot image on TQM85xx and therefor not affected by updates.
+
+ Also "beautify" code a bit (vertical alignment).
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit c0296b1801fc9426d772fa75fe58458db605dfee
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 00:16:01 2009 +0200
+
+ TQM85xx: adapt for new flash types
+
+ Old TQM85xx boards had 'M' type Spansion Flashes from the S29GLxxxM
+ series while new boards have 'N' type Flashes from the S29GLxxxN
+ series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB.
+
+ We now change the configuration to the new flash types for all
+ boards; this also works on old boards - we just waste two flash
+ sectors for the environment which could be smaller there.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6735104924f06340071a6914a9ee3345607fc102
+Author: Dave Liu <daveliu@freescale.com>
+Date: Mon May 18 17:49:23 2009 +0800
+
+ 85xx: Fix the wrong SYS_CLK_IN for 8569MDS
+
+ The SYS_CLK_IN of MPC8569MDS is 66.66MHz,
+ The DDR_CLK_IN is same with SYS_CLK_IN in 8569 processor.
+ so, change the SYS_CLK_IN from 66MHz to 66.66MHz.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 16e7559c08b6f29db4596d795b92914c01e6a1b3
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri May 15 10:27:44 2009 +0800
+
+ 85xx: Fix the wrong BCSR address of 8569MDS
+
+ The BCSR17[7] = 1 will unlock the write protect of FLASH.
+ The WP# pin only controls the write protect of top/bottom sector,
+ That is why we can save env, but we can't write the first sector
+ before the patch.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 90d13b8ac3d515349626d7c8a3dc34ef38c43fa6
+Author: Fredrik Arnerup <fredrik.arnerup@edgeware.tv>
+Date: Tue Jun 2 16:27:10 2009 -0500
+
+ 85xx: bugfix for reading maximum TLB size on mpc85xx
+
+ The MAXSIZE field in the TLB1CFG register is 4 bits, not 8 bits.
+ This made setup_ddr_tlbs() try to set up a TLB larger than the e500 maximum
+ (256 MB)
+ which made u-boot hang in board_init_f() when trying to create a new stack
+ in RAM.
+ I have an mpc8540 with one 1GB dimm.
+
+ Signed-off-by: Fredrik Arnerup <fredrik.arnerup@edgeware.tv>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+ Acked-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 1b5291dddf5f16c7ae10e3cb165882fa96038b26
+Author: Dave Liu <daveliu@freescale.com>
+Date: Fri Mar 27 14:32:43 2009 +0800
+
+ 85xx: Fix the clock adjust of mpc8569mds board
+
+ Currently the clk_adj is 6 (3/4 cycle), The settings will cause
+ the DDR controller hang at the data init. Change the clk_adj
+ from 6 to 4 (1/2 cycle), make the memory system stable.
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit faa14babd7466dfade358f9cac128ae246b9bf1b
+Author: RONETIX - Ilko Iliev <iliev@ronetix.at>
+Date: Fri Jun 5 16:54:31 2009 +0200
+
+ at91: fix a USB problem for AT91SAM9261
+
+ This patch corrects the missing PLLB initialization in usb_cpu_init()
+ for AT91SAM9261.
+ Because of the missing PLLB initialization, the USB support for all
+ AT91SAM9261 based boards will work only if the PLLB is configured by a
+ precedent bootloader.
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 0c24dec550ddb7d86b8bfdd8645b18479f73e6e2
+Author: Felix Radensky <felix@embedded-sol.com>
+Date: Sun May 31 20:44:15 2009 +0300
+
+ ppc4xx/net: Fix MDIO clock setup
+
+ This patch fixes MDIO clock setup in case when OPB frequency is 100MHz.
+ Current code assumes that the value of sysinfo.freqOPB is 100000000
+ when OPB frequency is 100MHz. In reality it is 100000001. As a result
+ MDIO clock is set to incorrect value, larger than 2.5MHz, thus violating
+ the standard. This in not a problem on boards equipped with Marvell PHYs
+ (e.g. Canyonlands), since those PHYs support MDIO clocks up to 8.3MHz,
+ but can be a problem for other PHYs (e.g. Realtek ones).
+
+ Signed-off-by: Felix Radensky <felix@embedded-sol.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d65e34d12514de2bbe3b8f519761d641c081bad0
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:27:29 2009 +0900
+
+ rtl8169: fix PCI system memory address
+
+ When PCI device use system memory, some PCI host controller should be
+ set physical memory address.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43
+Author: Manikandan Pillai <mani.pillai@ti.com>
+Date: Wed Apr 8 09:14:35 2009 +0530
+
+ SMC911x driver fixed for NFS boot
+
+ eth_halt() function in the smc911x drivers used to call the
+ smc911x_reset() function. eth_halt() used to be called after
+ tftp transfers. This used to put the ethernet chip in reset
+ while the linux boots up resulting in the ethernet driver
+ not coming up. NFS boot used to fail as a result.
+
+ This patch calls smc911x_shutdown() instead of smc911x_reset().
+ Some comments received has also been fixed.
+
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit e5a3bc2401a23f1890611f020f57f94824a534db
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sun May 3 12:11:40 2009 +0200
+
+ Add config option for disabling DM9000-SROM support.
+
+ Some boards do not have SROM support for the DM9000 network adapter.
+ Instead of listing these board names in the driver code, make this
+ option configurable from the board config file.
+
+ It also removes a build warning for the at91sam9261ek board:
+ 'dm9000x.c:545: warning: 'read_srom_word' defined but not used'
+
+ And it repaires the trizepsiv board build which was broken around the
+ same routines
+
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 2c0234fa79122a5aa77c4e17c33eb2fe184b61a7
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Wed Apr 8 13:23:37 2009 +0200
+
+ smc911x: write back the manually set MAC address
+
+ If the MAX address is given by the environment, write it back to the
+ hardware.
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+ Cc: Sascha Hauer <s.hauer@pengutronix.de>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit dfcd7f21607fd847236b04bb1a8d59a7c10ab99c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 00:16:03 2009 +0200
+
+ Redundant Environment: protect full sector size
+
+ Several boards used different ways to specify the size of the
+ protected area when enabling flash write protection for the sectors
+ holding the environment variables: some used CONFIG_ENV_SIZE and
+ CONFIG_ENV_SIZE_REDUND, some used CONFIG_ENV_SECT_SIZE, and some even
+ a mix of both for the "normal" and the "redundant" areas.
+
+ Normally, this makes no difference at all. However, things are
+ different when you have to deal with boards that can come with
+ different types of flash chips, which may have different sector
+ sizes.
+
+ Here we may have to chose CONFIG_ENV_SECT_SIZE such that it fits the
+ biggest sector size, which may include several sectors on boards using
+ the smaller sector flash types. In such a case, using CONFIG_ENV_SIZE
+ or CONFIG_ENV_SIZE_REDUND to enable the protection may lead to the
+ case that only the first of these sectors get protected, while the
+ following ones aren't.
+
+ This is no real problem, but it can be confusing for the user -
+ especially on boards that use CONFIG_ENV_SECT_SIZE to protect the
+ "normal" areas, while using CONFIG_ENV_SIZE_REDUND for the
+ "redundant" area.
+
+ To avoid such inconsistencies, I changed all sucn boards that I found
+ to consistently use CONFIG_ENV_SECT_SIZE for protection. This should
+ not cause any functional changes to the code.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Paul Ruhland
+ Cc: Pantelis Antoniou <panto@intracom.gr>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Gary Jennejohn <garyj@denx.de>
+ Cc: Dave Ellis <DGE@sixnetio.com>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit b81830f6e3b3e6ed114d071eb107965e49fa9b5a
+Author: Ilya Yanok <yanok@emcraft.com>
+Date: Thu May 14 14:03:09 2009 +0400
+
+ mmc: it's safe to ignore mmc_send_if_cond() return value
+
+ Return value of mmc_send_if_cond() can be safely ignored (as it is
+ done in Linux). This makes older cards work with MXC MCI controller.
+
+ Signed-off-by: Ilya Yanok <yanok@emcraft.com>
+
+commit dba6fcf6517faa5dda7df8109febe03c9c72a6f5
+Author: Stefan Roese <sr@denx.de>
+Date: Mon May 11 15:54:13 2009 +0200
+
+ cfi_mtd: Fix bug in last sector detection
+
+ This patch now enabled this cfi-mtd wrapper to correctly detect and
+ erase the last sector in an NOR FLASH device.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 4e3d89ba948eef801ffd46ef862cdede5b3f8320
+Author: Yauhen Kharuzhy <jekhor@gmail.com>
+Date: Thu May 7 00:43:30 2009 +0300
+
+ mmc: Fix decoding of SCR & function switch data on little-endian machines
+
+ SCR & switch data are read from card as big-endian words and should be
+ converted to CPU byte order.
+
+ Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit f33cb34b3971dabe3720d577b0e1b8601c09fe17
+Author: Yauhen Kharuzhy <jekhor@gmail.com>
+Date: Thu May 7 13:08:53 2009 +0300
+
+ mmc: Remove return from mmc_init for non SD 2.0 compatible cards.
+
+ Cards which are not compatible with SD 2.0 standard, may return response
+ for CMD8 command, but it will be invalid in terms of SD 2.0. We should
+ accept this case as admissible, just like Linux does.
+
+ Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
+ Signed-off-by: Andy Fleming <afleming@freescale.com>
+
+commit 998be3dd59ed0af4bec38324047fecfa88ac45db
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:56 2009 +0530
+
+ mmc: drop unnecessary casts
+
+ Now that response is a uint, we can drop all the casts.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit 0b453ffe28bb9227d86ddbe0893bd19c93f04ed7
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:55 2009 +0530
+
+ mmc: fix response decoding on little endian
+
+ The mmc code defines the response as an array of chars. However, it
+ access the response bytes both as (i) an array of four uints (with
+ casts) and (ii) as individual chars. The former case is used more
+ often, including by the driver when it assigns the response.
+
+ The char-wise accesses are broken on little endian systems because they
+ assume that the bytes in the uints are in big endian byte order.
+
+ This patch fixes this by changing the response to be an array of four
+ uints and replacing the char-wise accesses with equivalent uint-wise
+ accesses.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit 9b1f942c09dd942e6de3185caa81c111b14de567
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:54 2009 +0530
+
+ mmc: use lldiv to fix arm eabi build
+
+ The generic MMC core uses direct long long divisions, which do not build
+ with ARM EABI toolchains. Use lldiv() instead, which works everywhere.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit e85649c7e683faea1ccfddc9fa9abc62f38e4201
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:53 2009 +0530
+
+ mmc: check find_mmc_device return value
+
+ find_mmc_device returns NULL if an invalid device number is specified.
+ Check for this to avoid dereferencing NULL pointers.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit ac0865ff33870cdf2cd480165045e1bc311e9fa2
+Author: Rabin Vincent <rabin@rab.in>
+Date: Sun Apr 5 13:30:52 2009 +0530
+
+ mmc: clean up help texts
+
+ Remove some repeated words and superfluous newlines in the mmc command
+ help entries.
+
+ Signed-off-by: Rabin Vincent <rabin@rab.in>
+
+commit 7d6900ebe16d679c0e03f8d1584b64057a64ce39
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri May 29 17:01:48 2009 -0400
+
+ Blackfin: spi: fix pin handling of SPI0 SSEL4
+
+ CS4 on SPI0 has a dedicated PH8 pin which needs to be enabled as a
+ peripheral in order to work.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2157359dad2533987f5eb0181ef543693fad6a33
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue May 26 02:51:57 2009 -0400
+
+ Blackfin: fix if() logic in bootrom evt1 check
+
+ A missing set of parenthesis caused the silicon revision to apply only to
+ the BF533 and not the BF531/BF532 variants.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 76b5883da2cf049cd410901c04ea450e5f5c27c3
+Author: Stefan Roese <sr@denx.de>
+Date: Sat May 16 12:04:22 2009 +0200
+
+ jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together
+
+ Currently using JFFS2 with MTDPARTS enabled doesn't work. This is because
+ mtdparts_init() is available in both files, cmd_mtdparts.c and
+ cmd_jffs2.c. Please note that in the original cmd_jffs2.c file (before
+ the jffs2/mtdparts command/file split those 2 different versions
+ already existed. So this is nothing new. The main problem is that the
+ variables "current_dev" and "current_partnum" are declared in both
+ files now. This doesn't work.
+
+ This patch now changes the names of those variable to more specific
+ names: "current_mtd_dev" and "current_mtd_partnum". This is because
+ this patch also changes the declaration from static to global, so
+ that they can be used from both files.
+
+ Please note that my first tests were not successful. The MTD devices
+ selected via mtdparts are now accessed but I'm failing to see the
+ directory listed via the "ls" command. Nothing is displayed. Perhaps
+ I didn't generate the JFFS2 image correctly (I never used JFFS2 in
+ U-Boot before). Not sure. Perhaps somebody else could take a look at
+ this as well. I'll continue looking into this on Monday.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Cc: Wolfgang Denk <wd@denx.de>
+ Cc: Detlev Zundel <dzu@denx.de>
+ Cc: Ilya Yanok <yanok@emcraft.com>
+ Cc: Renaud barbier <renaud.barbier@ge.com>
+
+commit ab687907980fa28940a1a992d3f1c5d17cdbbf5d
+Author: Graf Yang <graf.yang@analog.com>
+Date: Sun May 24 02:34:34 2009 -0400
+
+ Blackfin: bf518f-ezbrd: setup portmux for async flash
+
+ The pins for async memory where parallel flash lives are not enabled by
+ default, so make sure we mux them as needed.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f40f6db278f602b55820693634a7256b0b4e4b80
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 20 10:58:03 2009 +0200
+
+ nand: Fix problem with ECC ordering for PPC4xx NDFC platforms
+
+ This patch enables Smart Media (SMC) ECC byte ordering which is used
+ on the PPC4xx NAND FLASH controller (NDFC). Without this patch we have
+ incompatible ECC byte ordering to the Linux kernel NDFC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 399aab7748bef053d59612211e1bd7a3fabfce18
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 20 10:58:02 2009 +0200
+
+ ppc4xx: Fix problem with ECC ordering for PPC4xx NDFC platforms
+
+ This patch now uses the correct ECC byte order (Smart Media - SMC)
+ to be used on the 4xx NAND FLASH driver. Without this patch we have
+ incompatible ECC byte ordering to the Linux kernel NDFC driver.
+
+ Please note that we also have to enable CONFIG_MTD_NAND_ECC_SMC in
+ drivers/mtd/nand/nand_ecc.c for correct operation. This is done with
+ a seperate patch.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 5d841fac8249a2b3f9a814da2140132be0a9f60d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed May 20 10:58:01 2009 +0200
+
+ ppc4xx: Move definition for PPC4xx NAND FLASH controller to header
+
+ This patch moves the definition for the PPC4xx NAND FLASH controller
+ (NDFC) CONFIG_NAND_NDFC into include/ppc4xx.h. This is needed for the
+ upcoming fix for the ECC byte ordering of the NDFC driver.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 2df72b82bc9e17b88dc82735a067749220beb025
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue May 19 12:53:36 2009 -0500
+
+ common: fix inline--weak error spotted by gcc 4.4
+
+ cmd_ide.c:547: error: inline function 'ide_inb' cannot be declared weak
+
+ removing the inline attribute fixes it.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 9fd9abedcc3c10cf89353265cbe05f58609d51f3
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Tue May 19 12:53:32 2009 -0500
+
+ TQM834x: remove defines causing gcc4.4 warnings
+
+ Configuring for TQM834x board...
+ cpu_init.c: In function 'cpu_init_f':
+ cpu_init.c:262: warning: array subscript is above array bounds
+ cpu_init.c:263: warning: array subscript is above array bounds
+ cpu_init.c:270: warning: array subscript is above array bounds
+ ...
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 0850301747228a3327f2815a85284d26ade3de95
+Author: Andreas Huber <andreas.huber@keymile.com>
+Date: Tue May 19 11:06:30 2009 +0200
+
+ UBI: fix return code in ubi_volume_read
+
+ Return -ENODEV instead of 0 when trying to read from a non existing volume.
+
+ Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit ec01481ddc4cf302c7f6d760b776ca94819ec21e
+Author: Graf Yang <graf.yang@analog.com>
+Date: Tue May 19 04:40:08 2009 -0400
+
+ Blackfin: fix timer_init()/timer_reset()
+
+ The timer_init() function was not using the right csync instruction, nor
+ was it doing it right after disabling the core timer.
+
+ The timer_reset() function would reset the timestamp, but not the actual
+ timer, so there was a common edge case where get_timer() return a jump of
+ one timestamp (couple milliseconds) right after resetting. This caused
+ many functions to improperly timeout right away.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c06326c73bf90e48a8e1cf8893ad31c575423f50
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat May 16 09:12:09 2009 +0900
+
+ MIPS: lib_mips/board.c: Remove unused variables
+
+ This fixes the following build warnings:
+
+ board.c: In function 'board_init_r':
+ board.c:328: warning: unused variable 'i'
+ board.c:326: warning: unused variable 'e'
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 47f6a36cc3f3427cc8e4f1d0f3e6678be6f33769
+Author: Shinya Kuribayashi <skuribay@pobox.com>
+Date: Sat May 16 09:12:09 2009 +0900
+
+ MIPS: Make all extern-ed functions in bitops.h static
+
+ All these functions are expected to be static inline-ed.
+ This patch also fixes the following build warnings on MIPS targets:
+
+ include/asm/bitops.h: In function 'ext2_find_next_zero_bit':
+ include/asm/bitops.h:862: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static
+ include/asm/bitops.h:885: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static
+ include/asm/bitops.h:887: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static
+
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit 87423d740b91329b8d1d0b73cafd6930993b558a
+Author: Thomas Lange <thomas@corelatus.se>
+Date: Fri Apr 24 16:22:16 2009 +0200
+
+ MIPS: Implement ethernet halt for au1x00
+
+ Implement ethernet halt() by putting MAC0 in reset.
+ If we do not do this, we will get memory corruption
+ when ethernet frames are received during early OS boot.
+
+ Signed-off-by: Thomas Lange <thomas@corelatus.se>
+ Signed-off-by: Shinya Kuribayashi <skuribay@pobox.com>
+
+commit a2e0ffcf2d9a22c582a93e84a4bef20fd3877f47
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 23:29:23 2009 +0200
+
+ Prepare v2009.06-rc2
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit f4317ea91942f44cc1c433277927b61618e9b0a5
+Author: Daniel Mack <daniel@caiaq.de>
+Date: Tue May 5 12:48:29 2009 +0200
+
+ ARM: fix PXA build by defining UP2OCR
+
+ U-Boot does not currently build for PXA platforms with USB support
+ enabled:
+
+ usb.c:46: error: 'UP2OCR' undeclared (first use in this function)
+
+ Signed-off-by: Daniel Mack <daniel@caiaq.de>
+ Cc: Markus Klotzbuecher <mk@denx.de>
+
+ Edited commit message.
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e26ad0eabd10a8cda51920fbcfe4da5b4ccf0c98
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 22:32:57 2009 +0200
+
+ Minor Coding Style fix; update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit af75a45d23b72a59ac5cc0427696c7f634fdc94b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 15 09:27:58 2009 +0200
+
+ IDE: bail out of dev_print() for unknown device types
+
+ Commit 574b319512 introduced a subtle bug by mixing a list of tests
+ for "dev_desc->type" and "dev_desc->if_type" into one switch(), which
+ then mostly did not work because "dev_desc->type" cannot take any
+ "IF_*" type values. A later fix in commit 8ec6e332ea changed the
+ switch() into testing "dev_desc->if_type", but at this point the
+ initial test for unknown device types was completely lost, which
+ resulted in output like that for IDE ports without device attached:
+
+ Device 1: Model: Firm: Ser#:
+ Type: # 1F #
+ Capacity: not available
+
+ This patch re-introduces the missing test for unknown device types.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Stefan Roese <sr@denx.de>
+ Cc: Detlev Zundel <dzu@denx.de>
+ Tested-by: Stefan Roese <sr@denx.de>
+
+commit c21f62d8483fbab44cd98d93ff2e9355a330d225
+Author: Stefan Roese <sr@denx.de>
+Date: Thu May 14 07:25:13 2009 +0200
+
+ 74xx_7xx: Fix rounding problem in CPU frequency calculation
+
+ This patch fixes a problem in the CPU frequency calculation. Without it
+ a 798MHz CPU is displayed as 368.503 MHz. And with it it's 798 MHz.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3ad8a0517b724782ab36f2b554a94de4c00c1adb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed May 13 22:24:12 2009 +0200
+
+ console.h: remove unused prototype 'console_realloc'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 84bf7ca522e94ec402a1264b01971b924b7e268f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Wed May 13 22:16:31 2009 +0200
+
+ api: remove un-needed ifdef CONFIG_API already handle by the Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 792a09eb9d5d8c4f74b7e9f2e887316d511a4e80
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed May 13 10:54:10 2009 +0200
+
+ Fix e-mail address of Gary Jennejohn.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 5e2c08c3ac90808e9be64856916bfd6df984823c
+Author: Emil Medve <Emilian.Medve@Freescale.com>
+Date: Tue May 12 13:48:32 2009 -0500
+
+ Remove inline qualifier from show_boot_progress()
+
+ The 'inline' is conflicting with the semantic of 'weak' attribute and with the
+ way the show_boot_progress() function is used.
+
+ Also gcc 4.4 is complaining about it:
+
+ main.c:51: error: inline function 'show_boot_progress' cannot be declared weak
+
+ Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
+
+commit fe6da4837308aa33d537ac3e7f36c2d66e3d9a36
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue May 12 15:17:35 2009 +0200
+
+ MPC8260: fixup device tree by property instead of path
+
+ cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the
+ clock frequencies in the device tree, using a CPU path
+ "/cpus/OF_CPU", with OF_CPU beind defined in the board config file.
+
+ However, this does not work when one board config file (here:
+ MPC8260ADS.h) is intended to be used for several diffrent CPUs and
+ therefor contains a generic definition like "cpu@0", as the device
+ trees that will then be loaded will contain specific names like
+ "PowerPC,8272@0".
+
+ We switch to using do_fixup_by_prop_u32() instead, so we can search
+ for device_type="cpu", as it is done in other architectures, too.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+ Cc: Heiko Schocher <hs@denx.de>
+ Acked-by: Heiko Schocher <hs@denx.de>
+ Tested-by: Heiko Schocher <hs@denx.de>
+
+commit 12a6753155716e5c3c181a8f40e8b2d3d669aefd
+Author: Rohit Hagargundgi <h.rohit@samsung.com>
+Date: Mon Mar 9 19:45:46 2009 +0530
+
+ Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
+
+ Add CONFIG_SYS_MONITOR_LEN macro to apollon board config.
+ CONFIG_SYS_MONITOR_LEN defines the U-Boot image size.
+ and is used by OneNAND ipl when reading U-Boot image.
+
+ Signed-off-by: Rohit Hagargundgi <h.rohit at samsung.com>
+ Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit c404cc5884b0c82fd82d751dbd8e8b3f8919a23a
+Author: Ben Warren <biggerbadderben@gmail.com>
+Date: Tue Apr 28 17:04:51 2009 -0700
+
+ Schedule removal of non-CONFIG_NET_MULTI net driver API
+
+ This will make CONFIG_NET_MULTI the only net driver configuration and
+ we'll be able to remove this option.
+
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 60bbcf0cc6e55095dd186e59a557d584b9b56eb1
+Author: Detlev Zundel <dzu@denx.de>
+Date: Tue May 5 16:04:06 2009 +0200
+
+ powerpc/inka4x0: Remove left-over ide reset code.
+
+ The pin which was used in preliminary versions of the board for ide
+ reset is really connected to the rtc clock.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit f578a2da6770951239ad91ee9a1875fdc71dbe48
+Author: Marco Stornelli <marco.stornelli@gmail.com>
+Date: Tue Apr 28 19:04:02 2009 +0200
+
+ Add imls utility command
+
+ This patch adds, under tools folder, a new command called imls. Its
+ goal is the same of UBoot's imls but it can be used as Linux shell
+ command. It reads from raw mtd partition and prints the list of the
+ stored images.
+
+ Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
+
+commit da95427ce431908714ae5e9f663ee6e2bc3bcc33
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Apr 28 08:36:11 2009 +0200
+
+ netloop: updates for NetLoop
+
+ Fix some issues introduced from commit:
+ 2f70c49e5b9813635ad73666aa30f304c7fdeda9
+ suggested by Mike Frysinger.
+
+ - added some comment for the env_id variable in common_cmd_nvedit.c
+ - moved some variables in fn scope instead of file scope
+ - NetInitLoop now static void
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3c1d89545de11822f8b5afb5646a57757620bd95
+Author: Heiko Schocher <hs@denx.de>
+Date: Tue Apr 28 07:48:39 2009 +0200
+
+ 82xx, ids8247: added ids8247 board to MAKEALL script
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit 890a017a8a995c921d1e889d360e8d6538ceecfe
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu May 7 13:08:55 2009 +0200
+
+ arm/imx31_phycore: Fix bi_arch_number
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Cc: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit ee47bfabefeb25bdfc83f49ef3bae0f325d3e69e
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Fri May 15 10:21:33 2009 +0200
+
+ remove myself as phycore/litekit Maintainer
+
+ I never acked a patch that adds me as phycore i.MX31 maintainer nor was
+ it me who pushed the patches, so remove myself from the maintainer list
+ so that other people do not longer wait for my ack.
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit c63254ef5628efe1c77cb2fdba20753f9666f55d
+Author: Sergey Lapin <slapin@ossfans.org>
+Date: Tue May 12 12:25:14 2009 +0400
+
+ AFEB9260 network fix
+
+ AFEB9260 uses PA10, PA11 for ETX2 and ETX3.
+ Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence,
+ not 0.
+
+ Signed-off-by: Sergey Lapin <slapin@ossfans.org>
+
+commit f8ddcd58221cab63dd25c2324dd2032487f748b1
+Author: Graf Yang <graf.yang@analog.com>
+Date: Tue May 5 02:26:27 2009 -0400
+
+ Blackfin: bf518f-ezbrd: reset ethernet PHY during init
+
+ We don't know what state the ethernet PHY is in when starting up, so make
+ sure we set it to a sane state. This fixes troubles seen when Linux boots
+ up, configures the PHY is a non-default state, and then the system reboots
+ into U-Boot which previously expected a reset state only.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 53310b88eaa27fb5cb83144d0b22389190ad87a1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue May 5 01:35:41 2009 -0400
+
+ Blackfin: bf527-ezkit: fix SPI flash env params
+
+ The BF527-EZKIT settings for storing the environment in SPI flash wasn't
+ using the correct sector settings for the SPI flash part that is actually
+ on the board.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f58bf804a14324c6c9186a7a664fa23281780e8b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 23:54:19 2009 -0400
+
+ Blackfin: avoid get_sclk() with early serial debug
+
+ When the clock functions were changed to use cached values (and thereby
+ avoiding expensive math functions), early serial debug broke because the
+ baud programming is called before external memory is available.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 02778f2f1b4b1a28b492367477db27c58d45ae35
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 23:39:41 2009 -0400
+
+ Blackfin: fix booting with older bootroms (no EVT1)
+
+ When dropping jump block support, the assumption was that all bootroms
+ supported entry point redirection via the EVT1 register. Unfortunately,
+ this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2
+ and older and BF561). No one really noticed earlier because these parts
+ usually are booted by bypassing the bootrom entirely, and older BF533
+ parts are not supported at all (too many anomalies).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit af2c37378f203857d5e6c957e77a14c2da5b59d2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Apr 24 23:22:48 2009 -0400
+
+ Blackfin: recurse with early serial initcode
+
+ Make sure we recurse through serial_putc() rather than bang on the UART
+ transmit register directly to avoid hardware overflows when using \n.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6b8edfde22acc574b5532e9f086e6a7287a9bc78
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 1 21:59:12 2009 +0200
+
+ Prepare v2009.06-rc1
+
+ Update CHANGELOG.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 6b2beb5626a143ca5347e7d2c6005be9936c1fbb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri May 1 15:38:06 2009 +0200
+
+ at91: remove lowlevel_init.S
+
+ lowlevel_init.S is not used any more so remove it.
+ As consequence, we also don't have to generate u-boot.lds
+ but can use a static version as before.
+
+ This also fixes the out-of-tree build problem introduced
+ with commit f0a2c7b4 "at91: add support for the PM9263 board"
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 0ee7a310479640ef17ce2fc0f6c13cf7961d2330
+Author: Wolfgang Denk <wd@denx.de>
+Date: Fri May 1 00:16:11 2009 +0200
+
+ Update CHANGELOG; minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d3a513c23ba4100d6983161cdc1f747dfd087bbd
+Author: Manikandan Pillai <mani.pillai@ti.com>
+Date: Tue Apr 21 17:29:05 2009 +0200
+
+ OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+ Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
+
+commit ac9140037a84629c5583066ff1a177396c47d89d
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Fri Apr 17 14:27:56 2009 +0200
+
+ OMAP3: Beagle: Set pinmux conditionally for Rev C boards
+
+ The Beagle Rev C boards pull UART2 from an alternate set of balls.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit c1a0fd5f2864e9d381f4a3dc948942cac974e89a
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Apr 27 18:33:33 2009 +0200
+
+ ubifs: BUG: Blocks commpressed with zlib
+
+ Blocks compressed with zlib dont have the full gzip header.
+
+ Without this patch, block compressed with zlib cannot be readed!
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit 35f6a943f7d92145d607c1d55f5c2e2eae5be630
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Apr 27 18:33:32 2009 +0200
+
+ lib_generic: gunzip: New function zunzip
+
+ Separate gunzip in
+
+ gunzip: Find the end of the header and call zunzip.
+ zunzip: Inflate gunzip block without header.
+
+ UBI fs blocks can be compresed in lzo, zlib or no-compression. The
+ current implementation of u-boot supported all the compressions but
+ there was a bug in the implementation of the zlib blocks.
+
+ UBIFS's Zlib blocks do not have header but they were compressed using
+ gunzip, a function used to decompress gunzip files/sectors with a
+ header.
+
+ This patch adds a new function zunzip that uncompress a zlib block with
+ no header.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+
+commit a1e5f93185d0d85a4b3fad3b6c743cddcd373b0c
+Author: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+Date: Thu Apr 23 15:37:16 2009 +0200
+
+ at91: fixed plla calc when no USB support is active
+
+ Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3791a1187c1401c33c9512595e6e89dbb46230c5
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Apr 22 01:12:04 2009 +0200
+
+ arm925t: Fix CONFIG_SYS_HZ to 1000
+
+ Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of
+ get_timer.
+
+ Changes since original version:
+ * Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to
+ improve timer resolution.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 42bf4b2248146abdc592bde0009c6ea42067f437
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Tue Apr 14 20:15:17 2009 +0200
+
+ OMAP3: Remove legacy NAND defines
+
+ Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora.
+
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit cba0b778dd5f1ea32959b6825c7f0a31501a99d5
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Apr 27 21:27:54 2009 +0530
+
+ OMAP3: Print correct silicon revision
+
+ The function display_board_info() displays incorrect
+ silicon revision - based on the return value from
+ function get_cpu_rev().
+
+ This patch fixes the problem.
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 90006e9b33bcdbf241b0295d186e3634137907a9
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Apr 27 21:27:44 2009 +0530
+
+ OMAP3: Remove unused board-types
+
+ The board-types defined in struct omap3_sysinfo seem to be
+ unused. The function display_board_info() is passed
+ board type as an argument; which is ignored.
+
+ This patch removes all uses of board-type, related definitions
+ and functions.
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 6a6b62e3aa4b340c4f8fc67b1487ddb5436c684d
+Author: Sanjeev Premi <premi@ti.com>
+Date: Mon Apr 27 21:27:27 2009 +0530
+
+ OMAP3: Use functions print_cpuinfo() and checkboard()
+
+ Use the functions print_cpuinfo() and checkboard() to
+ display the cpu and board specific information.
+
+ These functions reuse content from the existing function
+ display_board_info() - which has been removed.
+
+ Also, updated the existig OMAP3 configurations to
+ define:
+ - CONFIG_DISPLAY_CPUINFO
+ - CONFIG_DISPLAY_BOARDINFO
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit f8e2b3107ee00f2782f8ebf47e3f09cda4e2353a
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Mar 18 11:17:37 2009 +0100
+
+ MTD: Change cfi-mtd to accept non-uniform sector sizes
+
+ With this patch non-uniform NOR FLASH chips (chips with multiple erase
+ regions) can be exported via the cfi-mtd layer and therefor used by UBI.
+ We select the largest sector size as erasesize. The cfi driver will make
+ sure that the smaller sectors are handled correctly.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 3dcbe628d66b648e954bc8147d4faff2983206d9
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 23 12:35:22 2009 +0200
+
+ video: fix bug in cfb_console.c code
+
+ Fix bug in drawing long version/info strings:
+ U-Boot version string like
+ "U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX"
+ is long and doesn't wrap around correctly while drawing
+ beside the logo. Such long strings partially overwrite
+ the logo. This patch is an attempt to fix it.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+
+commit 4d9eab89b3b2c2ed432b14d355a56f274d8aac75
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 28 08:50:31 2009 +0200
+
+ cmd_ext2.c: fix compile warnings
+
+ Get rid of these warnings:
+
+ cmd_ext2.c:247: warning: format '%ld' expects type 'long int', but argument 2 has type 'int'
+ cmd_ext2.c:248: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'int'
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 28afe0160f87ff74574150d703055a965f91422a
+Author: Heiko Schocher <hs@denx.de>
+Date: Mon Apr 27 10:48:20 2009 +0200
+
+ ids8247: Remove legacy NAND defines
+
+ because legacy NAND support is deprecated converting to current
+ NAND interface. !This just compile, because I have no more the
+ hardware to test it.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+
+commit dbd33614404b65aa441c5620c3dbd560c4460c09
+Author: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+Date: Mon Apr 27 09:13:31 2009 +0200
+
+ ubifs: BUG realpath string must be ended with NULL
+
+ If the memory used to copy the link_make is "dirty" the string wont
+ be ended with NULL, throwing out multiple memory bugs.
+
+ Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@uam.es>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 65351a8793c51f3787efbbcf3aa1df0ad543c127
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:59:56 2009 -0500
+
+ bmp_logo: Check return value of fread()
+
+ Add basic error handling to fread() function calls. This prevents
+ compililation warnings such as:
+
+ bmp_logo.c: In function ‘main’:
+ bmp_logo.c:71: warning: ignoring return value of ‘fread’, declared with
+ attribute warn_unused_result
+ ...
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit eea8be86d1c2b570660d1f6c553845e13164231a
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Apr 24 15:59:46 2009 -0500
+
+ ncb: Check return value of write()
+
+ This prevents the compilation warning:
+
+ ncb.c: In function 'main':
+ ncb.c:32: warning: ignoring return value of ‘write’, declared with
+ attribute warn_unused_result
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit dbe29e36a4c2775b69b5a63b0ce2bac89c08e691
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 24 15:59:35 2009 +0200
+
+ mtd: nand/onenand: Register mtd device upon device scanning
+
+ With this patch the NAND and OneNAND devices are registered in the MTD
+ subsystem and can then be referenced by the mtdcore code (e.g.
+ get_mtd_device_nm()). This is needed for the new "ubi part" command
+ syntax without the flash type parameter (nor|nand|onenand).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 10bb62d85a0850dbad1fdd34123378686373f166
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 24 15:58:33 2009 +0200
+
+ mtd: nand: Include linux/mtd/partitions.h in nand_base.h
+
+ This patch removes this compilation warning when CONFIG_MTD_PARTITIONS is
+ defined:
+
+ nand_base.c: In function 'nand_release':
+ nand_base.c:2922: warning: implicit declaration of function 'del_mtd_partitions'
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2d579e5060413af5a740cb396dc87e1ff31bf5a9
+Author: Stefan Roese <sr@denx.de>
+Date: Fri Apr 24 20:24:19 2009 +0200
+
+ ubi: Remove flash selection parameter (nor|nand|onenand) from "ubi part"
+
+ This patch removes the now unnecessary flash type parameter from the
+ "ubi part" command. Currently the user has to define the type of flash
+ he will be using UBI on. Example:
+
+ => ubi part nor partition1
+
+ With this patch this type parameter is not needed anymore. The user can
+ now select the partition directly without the flash type paramter.
+ Example:
+
+ => ubi part partition1
+
+ This breaks backward compatibility right now because of the change in the
+ command syntax. But UBI support is still quite fresh and the advantage of
+ this new command is syntax big enough for this change. Additionally the
+ code is much cleaner now.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ CC: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 294f10ca9ea82a15e135dcb0fc658382ab206940
+Author: Detlev Zundel <dzu@denx.de>
+Date: Thu Apr 23 13:14:20 2009 +0200
+
+ mips/vcth: Use generic 16550 uart driver
+
+ As the common code also handles baudrate switching, which the board
+ specific vct.c driver did not support, this is one of the rare
+ occassions where deleting code actually adds a feature :)
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+ Acked-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+
+commit 0c8a84916c5dacccdc5b27b63fc463e9f3b04f07
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Tue Apr 21 02:26:31 2009 +0200
+
+ Separate mtdparts command from jffs2
+
+ On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
+ > Currently the mtdparts commands are included in the jffs2 command support.
+ > This doesn't make sense anymore since other commands (e.g. UBI) use this
+ > infrastructure as well now. This patch separates the mtdparts commands from
+ > the jffs2 commands making it possible to only select mtdparts when no JFFS2
+ > support is needed.
+
+ One more leftover... Let nboot command know about partitions even if JFFS2
+ support is not enabled.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 67c2e57c0875139dbfcd6f41c43e6ad0cb2e40c9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:22:13 2009 -0500
+
+ cmd_ide: Remove unused AmigaOneG3SE code
+
+ The output_data_short() and input_data_short() functions for the
+ AmigaOneG3SE are unused and result in compiler warnings.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c93c102ace00764a56dbdf78bac134a23906721e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:21:40 2009 -0500
+
+ AmigaOneG3SE: Fix CONFIG_CMD_CONSOLE definition
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 54e822f9590cc6c70411bd8cabd42236e07a2aa7
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:09:05 2009 -0500
+
+ Replace __asm references with __asm__
+
+ __asm__ follows gcc's documented syntax and is generally more common
+ than __asm. This change is only asthetic and should not affect
+ functionality.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit f9a109b3adc5e8647535357500e2a38f0558b5c2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Mon Apr 20 11:08:46 2009 -0500
+
+ Replace __attribute references with __attribute__
+
+ __attribute__ follows gcc's documented syntax and is generally more
+ common than __attribute. This change is only asthetic and should not
+ affect functionality.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 08f077da9298ff65cc6f85f90d2770000a1beee9
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Thu Apr 16 19:55:48 2009 -0700
+
+ mtdpart command: align output columns
+
+ Make the headers in the "mtdparts" command output line up
+ with their columns ... strike the extra TAB character.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit 06f41f825c23344d889d5419bb5eaeceb3ed2a02
+Author: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+Date: Thu Apr 16 10:51:03 2009 +0900
+
+ Remove sa1100.h
+
+ sa1100.h is not used anywhere, then remove it.
+
+ $ find . -name '*.h' -empty -print
+ ./include/sa1100.h
+ $ git grep 'sa1100.h' .
+ $
+
+ Signed-off-by: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7d3d30b1b3fbd0a07db254ead99fa6fff4f4d992
+Author: Stefan Roese <sr@denx.de>
+Date: Tue Apr 14 17:51:21 2009 +0200
+
+ UBIFS: Remove tnc_commit.c which is not used in the read-only version
+
+ I missed removing this file while implementing the UBIFS support. It's
+ not referenced at all, so let's remove it. Thanks to Artem Bityutskiy
+ for spotting.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 6356daff70867822bdb23cea49f98e65421a25b8
+Author: Adrian Hunter <adrian.hunter@nokia.com>
+Date: Tue Apr 14 17:50:38 2009 +0200
+
+ UBIFS: fix recovery bug
+
+ UBIFS did not recovery in a situation in which it could
+ have. The relevant function assumed there could not be
+ more nodes in an eraseblock after a corrupted node, but
+ in fact the last (NAND) page written might contain anything.
+ The correct approach is to check for empty space (0xFF bytes)
+ from then on.
+
+ Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 351f40caf2f7806b2cefb93e077ea619b9f684e8
+Author: Gao Guanhua <B22826@freescale.com>
+Date: Tue Apr 14 14:37:35 2009 +0800
+
+ fs: Fix the wrong type of var
+
+ The filelen should be signed type, not unsigned type.
+ otherwise, The condition as below never take.
+ if (filelen < 0)
+
+ Signed-off-by: Gao Guanhua <B22826@freescale.com>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 05f474c4d0469bebc0bb05df60a39dc7fdf28e62
+Author: Wolfgang Denk <wd@denx.de>
+Date: Tue Apr 28 00:29:34 2009 +0200
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ad74cae9ff8790727bc81ee91c6bca7d50dca446
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Thu Apr 16 23:15:15 2009 -0700
+
+ dm9000 EEPROM reading bugfix
+
+ Make the U-Boot dm9000 driver read addresses from EEPROM just
+ like Linux does ... read six bytes, instead of reading twelve
+ bytes and then discarding every other one.
+
+ Using the right Ethernet address is a big win.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit d4c02e6f5d49880123e7f584b88f857ffd874381
+Author: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+Date: Wed Feb 25 14:27:24 2009 +0900
+
+ rtl8169: fix cache coherency problem
+
+ Fix the problem that cannot access actual data when CPU data cache enabled.
+
+ Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
+ Tested-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
+ Acked-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit a85693b3bd4431b05b7df608b6f7733c0f80c53e
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Tue Apr 21 17:30:51 2009 +0200
+
+ OMAP3: Fix changed mmc init command
+
+ In recent U-Boot mmcinit changed to mmc init.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit 34b76a14f676bc6501c27a96564e4dfb4793f033
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 26 20:39:26 2009 +0200
+
+ lib_arm/board.c: remove misleading "test-only" comment.
+
+ For a long time, the print_cpuinfo() declaration in lib_arm/board.c
+ had been marked as "test-only", which is plain wrong considering
+ current usage. Delete this misleading comment.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 7239c5da5e9197accb3dfe395be4502c3b9bca8e
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Apr 12 15:40:16 2009 -0700
+
+ minor DaVinci clock cleanup
+
+ Minor cleanup to clock-related defines for DaVinci DM6446 boards:
+
+ - CONFIG_SYS_CLK_FREQ is unused; remove it.
+
+ - CONFIG_SYS_NS16550_CLK must be the same as CONFIG_SYS_HZ_CLOCK
+
+ On DM6446 both of those peripheral clocks actually come from the
+ same source, the primary oscillator. Having them use the same
+ symbol avoids bugs in the clone'n'modify development cycle.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit ffd8c7170d55c34bbfcfd2c84093dcaff796cbf3
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Mon Apr 6 19:59:29 2009 +0900
+
+ s3c64xx: remove unnecessary definition
+
+ CONFIG_S3C6400 is must defined at config header file
+ That definition is unnecessary at this file
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 14b9308d511b53042ef478936e367a67282df66a
+Author: Heiko Schocher <hs@denx.de>
+Date: Fri Apr 24 06:50:45 2009 +0200
+
+ 83xx: searching "muram-data" by compatible property
+
+ if using CONFIG_BOOTCOUNT_LIMIT feature on a MPC8360 CPU
+ in the muram-data node, the reg entry needs to be updated.
+ This is done in fdt_fixup_muram(), but we should use
+ the compatible "fsl,qe-muram-data" for searching the
+ node instead of searching the muram-data node with
+ an absolute path.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 8e15088794807944b221c11609d36789efc7f767
+Author: Anatolij Gustschin <agust@denx.de>
+Date: Thu Apr 23 21:29:34 2009 +0200
+
+ mpc83xx: MPC8360ERDK: fix environment offset configuration bug
+
+ The size of U-Boot binary for MPC8360ERDK increased
+ (> 2 flash sectors now), so 'saveenv' will partially
+ overwrite U-Boot in flash and will brick the board.
+ This patch moves environment offset to fourth flash
+ sector and also fixes CONFIG_SYS_MONITOR_LEN.
+
+ Signed-off-by: Anatolij Gustschin <agust@denx.de>
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit 3c172c4fdbbb5858fae38478d6399be4a16be3fc
+Author: Michael Zaidman <michael.zaidman@gmail.com>
+Date: Sat Apr 4 01:43:00 2009 +0300
+
+ NetLoop initialization bug
+
+ The patch fixes the bug of partial initialization of global network
+ parameters.
+
+ Upon u-boot's start up the first ping command causes a failure of the
+ consequent TFTP command. It happens in the recently added mechanism of
+ the NetLoop initialization where initialization of global network
+ parameters is separated in the NetInitLoop routine which is called per
+ env_id change. Thus, ping request will initialize the network parameters
+ necessary for ping operation only, afterwards the env_changed_id will be
+ set to the env_id that will prevent all following initialization requests
+ from other protocols.
+ The problem is that the initialized by ping subset of network parameters
+ is not sufficient for other protocols and particularly for TFTP which
+ requires the NetServerIp also.
+
+ Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit b11f664f52c2855990107c18f242223377183575
+Author: Timur Tabi <timur@freescale.com>
+Date: Thu Apr 9 10:27:05 2009 -0500
+
+ net: fix ULI 526x macro usage in netdev.h
+
+ Change netdev.h to use CONFIG_ULI526X instead of CONFIG_ULI526. CONFIG_ULI526X
+ is used everywhere else, so that's the correct macro name. Without this fix,
+ Ethernet will not work on the Freescale MPC8610 HPCD.
+
+ Signed-off-by: Timur Tabi <timur@freescale.com>
+ Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
+
+commit 7ee38c044ca5041d3378d6507580ea4ec344af96
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Sun Apr 12 15:38:06 2009 -0700
+
+ fix DaVinci NS16550_REG_SIZE regression
+
+ Update the DaVinci DM6446 boards to use the new convention
+ for CONFIG_SYS_NS16550_REG_SIZE ... the size hasn't changed
+ from the original 4 bytes, but these chips are little-endian.
+
+ (Resolves a regression added recently by the include/ns16550.h
+ patch to "Unify structure declaration for registers". The code
+ previously worked just fine because the registers were accessed
+ as host-endian words, not as bytes.)
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+
+commit dfc99e143fca44a492918ac6cf3f76ee9c2473a9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Apr 12 22:29:20 2009 -0400
+
+ cmd_nand: drop duplicate NULL ptr check
+
+ The first if statement checks for NULL ptrs, so there is no need to check
+ it again in later else cases (such as .oob).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Scott Wood <scottwood@freescale.com>
+
+commit 7732cef2eeb4e339cfcd8553fab773af73a20805
+Author: David Brownell <dbrownell@users.sourceforge.net>
+Date: Mon Apr 13 08:03:38 2009 -0700
+
+ CMD_UBI != MTD_PARTITIONS
+
+ Fix dependency goofage: it should certainly be possible to have the
+ partition support without bringing in UBI commands.
+
+ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit 6ebff365eb63093ca35b687316002535c6a18820
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 16 21:30:48 2009 +0200
+
+ at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000
+
+ The timer has been rewrote with a precision at ~0,18%
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Tested-by: Sergey Lapin <slapin@ossfans.org>
+ Tested-by: Eric BENARD <ebenard@free.fr>
+
+commit f0a2c7b4b64eacd06bb272856bcc056be8719f5a
+Author: Ilko Iliev <iliev@ronetix.at>
+Date: Thu Apr 16 21:30:48 2009 +0200
+
+ at91: add support for the PM9263 board of Ronetix GmbH
+
+ The PM9263 board is based on the AT91SAM9263-EK board.
+
+ Here is the page on Ronetix website:
+ http://www.ronetix.at/starter_kit_9263.html
+
+ Signed-off-by: Ilko Iliev <iliev@ronetix.at>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit dc39ae9513c32dfeb9e018dc0d22c6484514fefb
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Apr 16 21:30:44 2009 +0200
+
+ at91sam9/at91cap: improve clock framework
+
+ calculate dynamically the clock rate and pllb setting for usb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit dd7c302099ef5590069bdbf292aaa8230cd59de7
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 14:08:48 2009 +0200
+
+ ppc4xx: Disable POST memory test on NAND-booting Kilauea
+
+ Don't run the memory POST on the NAND-booting version. It will
+ overwrite part of the U-Boot image which is already loaded from NAND
+ to SDRAM. We were just lucky that it booted at all with this SDRAM
+ test enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9a929170be89b27bce677504da27e88600c06c49
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 14:06:26 2009 +0200
+
+ ppc4xx: Disable POST memory test on NAND-booting Sequoia
+
+ Don't run the memory POST on the NAND-booting version. It will
+ overwrite part of the U-Boot image which is already loaded from NAND
+ to SDRAM. We were just lucky that it booted at all with this SDRAM
+ test enabled.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 17c1b0e89b8be7d90f605eb19af9218c6275bfb3
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 11:32:53 2009 +0200
+
+ ppc4xx: Remove unused code for Sequoia NAND booting version
+
+ The current define of get_bus_freq() in the CONFIG_NAND_SPL #ifdef is not
+ used at all. This patch changes it's define to the currently used value of
+ 133333333 and removes the unnecessary code.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit cf9409885cbe01405bad76790e99f8adf3351f4d
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 15 10:50:48 2009 +0200
+
+ ppc4xx: Add "booting from NAND" to 4xx NAND-booting targets
+
+ This additional text in the bootup log helps to see if the board is
+ configured for NAND-booting. Especially helpful for boards that can
+ boot from NOR and NAND (e.g. most of the AMCC eval boards).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5132106a27b8fb302677852b26ffd319b40d17e2
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Apr 8 10:36:22 2009 +0200
+
+ ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia
+
+ Currently the NOR & NAND support in Linux only works for the "standard"
+ Sequoia, the version booting for NOR flash. The NAND-booting version
+ has the chip-selects swapped. Here the chip-select mappings:
+
+ "Standard" NOR-booting version:
+ CS0 NOR
+ CS3 NAND
+
+ NAND-booting version:
+ CS0 NAND
+ CS3 NOR
+
+ With this path the dtb gets fixed-up, so that the correct chip-select
+ numbers are patched in the dtb enabling correct NOR & NAND support
+ in Linux on the NAND-booting Sequoia version.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit aad4eca4ba8d597747199d8af723426681557dda
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 09:10:27 2009 -0400
+
+ Blackfin: audit UART for all known anomalies
+
+ There is no code change here, just new comments, but this keeps me from
+ having to do another audit from scratch in the future.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8ef929afa43c77c9573caa57c6e17a97a33775c0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:40:13 2009 -0400
+
+ Blackfin: add check for anomaly 05000362
+
+ DESCRIPTION:
+ The column address width settings for banks 2 and 3 are misconnected in
+ the SDRAM controller. Accesses to bank 2 will result in an error if the
+ Column Address Width for bank 3 (EB3CAW ) is not set to be the same as
+ that of bank 2.
+
+ WORKAROUND:
+ If using bank 2, make sure that banks 2 and 3 have the same column address
+ width settings in the EBIU_SDBCTL register. This must be the case
+ regardless of whether or not bank 3 is enabled.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c2e07449f546fb375289cdac1a608fdc20357873
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:29:55 2009 -0400
+
+ Blackfin: add comment about anomaly 05000430 avoidance
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 48ab1509254a4c175e4f65c478a978928ffe09ec
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:10:22 2009 -0400
+
+ Blackfin: add workaround for anomaly 05000242
+
+ DESCRIPTION:
+ If the DF bit is set prior to a hardware reset, the PLL will continue to
+ divide CLKIN by 2 after the hardware reset, but the DF bit itself will be
+ cleared in the PLL_CTL register.
+
+ WORKAROUND:
+ Reprogram the PLL with DF cleared if the desire is to not divide CLKIN by
+ 2 after reset.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ce1fe4ba6bb9df7c57351436fa17d1af8bbe7916
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:09:24 2009 -0400
+
+ Blackfin: add workaround for anomaly 05000171
+
+ DESCRIPTION:
+ The Boot ROM is executed at power up/reset and changes the value of the
+ SICA_IWR registers from their default reset value of 0xFFFF, but does not
+ restore them.
+
+ WORKAROUND:
+ User code should not rely on the default value of these registers. Set
+ the desired values explicitly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 51ee6e057f7a920e2a125cd9f985d10f625e355f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 08:22:36 2009 -0400
+
+ Blackfin: update anomaly sheets
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a343ba87ea0320ca0a4ecfa2c42cd9d4f18883df
+Author: Graf Yang <graf.yang@analog.com>
+Date: Sat Apr 4 07:45:57 2009 -0400
+
+ Blackfin: nand: flush peripheral before polling it
+
+ We need to make sure the data written to the nand flash controller makes
+ it there before we start polling its status register. Otherwise, we may
+ get stale data and return before the controller is actually ready.
+
+ Signed-off-by: Graf Yang <graf.yang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Scott Wood <scottwood@freescale.com>
+
+commit 3ccbfb25f48af78e7092ac75f3115e924e76c748
+Author: Remy Bohmer <linux@bohmer.net>
+Date: Sun Apr 5 11:43:28 2009 +0200
+
+ Support for PXA27X UDC.
+
+ This Patch adds Support for PXA27X UDC.
+ (Rebased to drivers/usb reorganisation)
+
+ Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit 2731b9a86685190d26b1883f27afda5ac8e1a313
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Apr 3 12:46:58 2009 +0200
+
+ drivers/usb: regorganisation
+
+ move to linux usb driver organisation
+
+ as following
+
+ drivers/usb/gadget
+ drivers/usb/host
+ drivers/usb/musb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit d04371a116d102e587ba7aa4c329b441cdbea3f4
+Author: Todor I Mollov <tmollov@ucsd.edu>
+Date: Sat Apr 4 06:53:06 2009 -0400
+
+ Blackfin: spi: make cs deassert function deterministic
+
+ Blackfin SPI driver was not driving the SPI chip-select high before
+ putting the chip-select signals into tri-state mode. This is probably
+ something that slipped by unnoticed in most designs. If the signals are
+ put directly into a tri-state mode, then the board is relying on the
+ pull-up resistors to pull up the chip-select before the next transaction.
+ Most of the time this is fine, except when you have two transactions that
+ follow each other very closely, such as the flash erase and read status
+ register commands. In this case I was seeing a 500ns separation between
+ the transactions. In my setup, with a 10kOhm pull-up, it would meet
+ timing spec about half the time and resulted in intermittent errors. (A
+ stronger pull up would fix this, but our design is targeted for low power
+ consumption and a 3.3kOhm @ 3.3v is 3.3mW of needless power consumption.)
+ I modified the spi_cs_deactivate() function in bfin_spi.c to drive the
+ chip-selects high before putting them into tri-state. For me, this
+ resulted in a rise time of 5ns instead of the previous rise time of about
+ 1us, and fully satisfied the timing spec of the chip.
+
+ Signed-off-by: Todor I Mollov <tmollov@ucsd.edu>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c6fadb9c73a6a3e0c7f20696e978304a593a8d2d
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Dec 13 21:08:05 2008 +0100
+
+ integratorap: fix PCI support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1c397508c836dfcb01fb2471c71de0727051f117
+Author: Dirk Behme <dirk.behme@googlemail.com>
+Date: Mon Mar 30 21:15:23 2009 +0200
+
+ OMAP3: Update Overo pin mux for new expansion board
+
+ A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and
+ switches. This patch changes the pinmux configuration for those pins.
+ They were previously set up for unused MMC3_DAT4-7.
+
+ Signed-off-by: Steve Sakoman <steve@sakoman.com>
+ Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
+
+commit ab298231518675b3784aea88ee9b978438f99e63
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Apr 5 13:08:03 2009 +0200
+
+ arm: unify reset command
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b3acb6cd4059dfb29a5e99095d802717f53ff784
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Apr 5 13:06:31 2009 +0200
+
+ arm: clean cache management
+
+ unify arm cache management except for non standard cache as ARM7TDMI
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 677e62f43235de9a1701204d7bcea0fb3d233fa1
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Apr 5 13:02:43 2009 +0200
+
+ arm: update co-processor 15 access
+
+ import system.h from linux
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 23e4af49e066a53cd3e3659b68ef90572d88de84
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Apr 5 00:42:02 2009 +0200
+
+ ARM: add the imx31_phycore_eet target to MAINTAINERS
+
+ imx31_phycore_eet is a variant of the imx31_phycore board with a few
+ extensions, which justifies a separate entry in the MAINTAINERS list,
+ whereas normally all entries sharing a single configuration file and a
+ board/ directory have only one entry in MAINTAINERS.
+
+ Reported-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 69c5bf29908b3a7f8e23bd9891b7ecc5b21f23e5
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Sun Apr 5 00:37:07 2009 +0200
+
+ ARM: fix out-of-tree build of imx31_phycore_eet
+
+ Fix out-of-tree build of the imx31_phycore_eet target.
+
+ Reported-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 3c853f31d6a8e4407f73a2ca2c63d383a245f237
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Sat Apr 4 17:44:51 2009 -0400
+
+ mpc5200: reduce delays in i2c
+
+ The previous code waited 1000us before checking i2c
+ status. Measurement shows i2c is usually ready in
+ under 50us. Change the polling interval to 15us,
+ loop 6,667 times to keep the polling timeout constant
+ at 100ms.
+
+commit 36003268968949110ef145d9f2eaf8439c96d25b
+Author: Sanjeev Premi <premi@ti.com>
+Date: Fri Apr 3 14:00:07 2009 +0530
+
+ OMAP: Fix compile issue
+
+ Fixes this compile error:
+ board.c: In function 'do_switch_ecc':
+ board.c:339: error: 'cmd_tbl_t' has no member named 'help'
+ make[1]: *** [board.o] Error 1
+ make[1]: Leaving directory `/db/psp_git/users/a0756819/u-boot/cpu/arm_cortexa8/omap3'
+ make: *** [cpu/arm_cortexa8/omap3/libomap3.a] Error 2
+
+ This is due to the fact that current command uses long
+ help for the usage print even if the CONFIG_SYS_LONGHELP
+ is not enabled. (Thanks Jean-Christophe for explanation).
+
+ Signed-off-by: Sanjeev Premi <premi@ti.com>
+
+commit 342c1a5d9ab74febf3226a86216dc5aa05295d46
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Fri Apr 3 09:56:16 2009 +0900
+
+ s3c64xx: fix the wrong gpio offset
+
+ This patch fix the wrong gpio offset
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit ab0689c316c9b2ee33f4de1c50263b64e539f12a
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Wed Nov 26 10:18:13 2008 +0900
+
+ Move machine specific code to board at s3c64xx (v2)
+
+ Move machine specific code to smdk6400.
+ Some board use OneNAND instead of NAND.
+
+ Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w.
+ So it's better to use macro instead of hard-coded value.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 767f3acd9f6e1dcb8ada926c333945382eddc7e8
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Apr 1 22:02:19 2009 -0500
+
+ ZOOM1 Remove legacy NAND defines
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit 5891151707ee5902fe62d554c247f42865815757
+Author: Tom Rix <Tom.Rix@windriver.com>
+Date: Wed Apr 1 22:02:20 2009 -0500
+
+ OMAP3 Fix multiline formatting in board init files.
+
+ Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
+
+commit c0a14aedc3440d6591b8c86d45861a0a8b46e11d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 5 00:27:57 2009 +0200
+
+ Update CHANGELOG, coding style cleanup.
+
+commit f63728c804ab7413a67d70f6774cd30c3f7b40fb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Apr 5 00:18:44 2009 +0200
+
+ One more fix for building env_embedded.o
+
+ In addition to the changes for CONFIG_ENV_IS_IN_FLASH as done in
+ commit afcbce07, we also need to do the same for
+ CONFIG_ENV_IS_IN_EEPROM and CONFIG_ENV_IS_IN_NVRAM.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e3d1ac7bb1955d36980d267cb4cec40b0f7d30b5
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Apr 2 16:15:10 2009 -0500
+
+ common/image.c: Relocate strings in tables.
+
+ Without this, u-boot can crash or print garbage if the original link
+ address no longer points to a valid string.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 3a671fc06ae1d9e8eba76600372317c75ae0eb3e
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Apr 2 16:10:36 2009 -0500
+
+ mpc8260: Fill in brg's clock-frequency in device tree.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c73ed274a211699739d83c2cef92853dc6716e15
+Author: Scott Wood <scottwood@freescale.com>
+Date: Thu Apr 2 18:20:43 2009 -0500
+
+ MPC8260ADS: Add nfsboot/ramboot to default environment.
+
+ This brings it in line with other Freescale boards.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit c203ef5db0476a8c4f6dd86b2e9e9db0ea973f84
+Author: Andreas Huber <andreas.huber@keymile.com>
+Date: Thu Apr 2 17:15:34 2009 +0200
+
+ UBI/cfi-mtd: Fix mtd name for multiple chips
+
+ On platforms with multiple NOR chips, currently only the first one
+ can be selected using the "ubi part" command. This patch fixes this
+ problem by using different names for the NOR "mtd devices".
+
+ It also changes the name of the NOR MTD device from "cfi-mtd" to
+ "norX" (X indexing the device numer) to better match the mtdparts
+ defaults.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
+
+commit 6b6bb02f27fcabfb37ea717fb7e243248e1e2acf
+Author: Peter Korsgaard <jacmet@sunsite.dk>
+Date: Tue Mar 31 17:52:16 2009 +0200
+
+ tools/setlocalversion: use git svn instead of git-svn
+
+ Use the new "git <subcmd>" syntax instead of the deprecated
+ "git-<subcmd>".
+
+ Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
+
+commit 7fa96a9a54eb0d87d73888ec2565cda790ba0dff
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Tue Mar 31 14:09:40 2009 +0800
+
+ eSPI: add the eSPI register support
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+
+commit 869f6bf4def5a053fbd1aecd8b2fc36f05196c0b
+Author: Minkyu Kang <mk7.kang@samsung.com>
+Date: Mon Mar 30 14:55:51 2009 +0900
+
+ cmd_mmc: add support for device command for selecting mmc device
+
+ This patch improves device command for selecting mmc device
+
+ Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
+
+commit 9abc9ef8fbe079bf75a634ce64b7dcdb7b0d8bdc
+Author: Alan Carvalho de Assis <acassis@gmail.com>
+Date: Sat Mar 28 19:50:16 2009 -0300
+
+ Small fix to m5282evb
+
+ This is just a small fix to get u-boot on m5282evb.
+
+ Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
+
+commit febd7e4174e54579c9aa165c85c519fe5288f9d2
+Author: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
+Date: Fri Mar 27 10:21:14 2009 +0100
+
+ UBIFS: add R/O compatibility
+
+ Now UBIFS is supported by u-boot. If we ever decide to change the
+ media format, then people will have to upgrade their u-boots to
+ mount new format images. However, very often it is possible to
+ preserve R/O forward-compatibility, even though the write
+ forward-compatibility is not preserved.
+
+ This patch introduces a new super-block field which stores the
+ R/O compatibility version.
+
+ Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
+ Acked-by: Adrian Hunter <Adrian.Hunter@nokia.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 852dbfdd56f68eb67d138b306a64e4de58dabb91
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 23 22:27:34 2009 -0400
+
+ more command usage cleanup
+
+ Fix up a few dangling commands like in "Command usage cleanup" commit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b93b24bf76f8a8220b236df3a5f30b2204eb4edc
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 23 12:06:07 2009 +0100
+
+ Separate mtdparts command from jffs2
+
+ On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote:
+ > Currently the mtdparts commands are included in the jffs2 command support.
+ > This doesn't make sense anymore since other commands (e.g. UBI) use this
+ > infrastructure as well now. This patch separates the mtdparts commands from
+ > the jffs2 commands making it possible to only select mtdparts when no JFFS2
+ > support is needed.
+
+ ... and to make it useful for NAND chips as well, we should also remove now
+ unrelated CONFIG_JFFS2_NAND. Note that struct part_info etc is in
+ jffs2/load_kernel.h which is a bit misleading filename for that purpose,
+ but that can be fixed later (tm).
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit b196ca75503ce307c535b87bf47d51f05e7530df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Mar 22 22:18:01 2009 -0400
+
+ smc91111_eeprom: move board-specific init into SMC91111_EEPROM_INIT()
+
+ Rather than sticking Blackfin-specific stuff into the eeprom example, use
+ an indirect macro so that any board can override it with their own magic
+ sauce in their board config file.
+
+ Also fix some spurious semi-colons in defines while I'm at it ...
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit f5cf2ef2ad2a8bf321712ab460ed846120163d74
+Author: Sascha Hauer <s.hauer@pengutronix.de>
+Date: Sat Mar 21 09:38:46 2009 -0400
+
+ mpc52xx phy: initialize only when needed
+
+ Do not initialize phy on startup, instead initialize it
+ when we actually need it.
+
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit 03bab0091948196b9558248684c04f60943ca4b5
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 16:51:40 2009 +0200
+
+ at91sam9263ek: enable hush and auto complete support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Acked-by: Stelian Pop <stelian@popies.net>
+
+commit 4758ebdd53571d4d183be5c2db8f0ee4ef368915
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:44 2009 +0100
+
+ at91: move dataflash spi driver to drivers/spi
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2b7178afce59f71e95da657273f4132012098c1f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:44 2009 +0100
+
+ at91: move usb driver to drivers/usb
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f82518d7f443ebac5f8821103a3c521c963aa6ee
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:43 2009 +0100
+
+ at91rm9200: Reset update
+
+ Update the rm9200 reset sequence to try executing a board-specific reset
+ function and move specific board reset to board.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 3524049cd053746298e4cfab2449882e75c146fc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:43 2009 +0100
+
+ at91rm9200: move serial shutdown code to serial drivers
+
+ introduce serial_exit for this purpose. Use it only when the rm9200
+ serial driver is active
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit beebd851cdbc9dd070bcdfec1fd8f17e3cc91bc0
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:43 2009 +0100
+
+ at91rm9200: move serial driver to drivers/serial
+
+ add CONFIG_AT91RM9200_USART to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit cb82a532669f6b02225ec3429ea4d49ff2b97d0a
+Author: Ulf Samuelsson <ulf@atmel.com>
+Date: Fri Mar 27 23:26:43 2009 +0100
+
+ Add support for the AT91RM9200EK Board.
+
+ The AT91RM9200-EK Evaluation Board supports the AT91RM9200
+ ARM9-based 32-bit RISC microcontroller and enables real-time code development
+ and evaluation.
+
+ Here is the chip page on Atmel website:
+ http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507
+
+ with
+ - NOR (cfi driver)
+ - DataFlash
+ - USB OHCI
+ - Net
+ - I2C (hard)
+
+ Signed-off-by: Ulf Samuelsson <ulf@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b9c0e4c29e3ec12668ac50e954e7c9ba8f7aa10a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:42 2009 +0100
+
+ add dataflash mmc mux missing support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2a325ce3c705ab2d82760afc541c511328472df8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:42 2009 +0100
+
+ at91rm9200dk: Move conditional compilation to Makefile
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 90a92a708d5180a20d600ba0fc2352ec76dc3829
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:42 2009 +0100
+
+ at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECT
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 843a2654bce74192de2b5a43474fdc27a572ab40
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 23:26:42 2009 +0100
+
+ at91sam9: add watchdog support
+
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a47492ac60657dd9d59c713aa049319ea6eabd52
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Fri Mar 27 13:14:52 2009 +0100
+
+ at91sam9/at91cap: spi init add hardware chip select support
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 66932ac3929c7a145a6ef6574a96fd7535154951
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 4 19:15:40 2009 +0200
+
+ netstar: fix crc32.c dependancy location
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 42f9ebff2f758bef524780a00c712eb63a72d99b
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Apr 3 15:24:40 2009 -0500
+
+ MPC8260ADS: Define CONFIG_HAS_ETH0.
+
+ This is required so that the MAC address will be updated in the device tree.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 8701eceffdf77e2908d0b58add0dabc16edf6087
+Author: Scott Wood <scottwood@freescale.com>
+Date: Fri Apr 3 15:26:45 2009 -0500
+
+ PQ2FADS: Enable PCI.
+
+ PCI on PQ2FADS is very similar to PCI on MPC8272ADS.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 83863df04bd30bfe2430b0c43ca9f78596d3f0bc
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 4 16:57:50 2009 +0200
+
+ Fix quoting bug introduced by commit 74de7aef
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit ecf3fb223a56e3c6aa696d94d694eeaca0f44d33
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 4 16:14:51 2009 +0200
+
+ Fix implicit declaration of function 'htons'
+
+ Include <netinet/in.h> instead of <linux/in.h> to get htons()
+ prototpye.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit e6a6789f41f0560ce280089fbd3f1bd0f0f64306
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Sat Apr 4 10:21:02 2009 -0500
+
+ fsl_law: Fix bug in calculation of LAW sizing
+
+ In set_ddr_laws() when we determined how much of the size requested
+ to be mapped was covered by the the first LAW we needed to recalculate
+ the size based on what was actually mapped.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 32049b4048ff8e59bd5ba6160d6d5206d283b2a2
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Apr 2 13:57:05 2009 -0500
+
+ fsl_pci: Move prototypes into fsl_pci.h and remove explicit externs
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c8514622e2713d9c47919acfe23fce386782afe7
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Apr 2 13:22:48 2009 -0500
+
+ fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.h
+
+ Rename the pci header for FSL HW so we can move some prototypes
+ in there and stop doing explicit externs
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit afcbce07e9323c0e8aeb783ba7ce6104860fd7a7
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Apr 4 16:10:40 2009 +0200
+
+ Fix building of env_embedded.o
+
+ Since commit a706bfc7 common/env_embedded.o and tools/envcrc were
+ only built when CONFIG_ENV_IS_EMBEDDED was set, but this breaks
+ building for many boards.
+
+ We always have to build these files when CONFIG_ENV_IS_IN_FLASH is
+ set.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit a31e091ad70915278fb15b79d6ae53ea2d44b251
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 4 12:49:11 2009 +0200
+
+ rename include/zlib.h to include/u-boot/zlib.h
+
+ Some systems have zlib.h installed in /usr/include/. This isn't the
+ desired file for u-boot code - we want the one in include/zlib.h.
+ This rename will avoid the conflict.
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ae644c178f097874a92a6d934f364985fc7e075a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Apr 4 12:46:31 2009 +0200
+
+ tools/Makefile: fix image.c dependancy location
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit b074a7081124d7f05fd1651a3bc0b5579fdfa473
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Apr 4 07:42:25 2009 -0400
+
+ tools: add ncb to gitignore
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 453c0d7558215cbc8636d94af172886d84e0dbba
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 3 16:45:46 2009 +0200
+
+ include/ns16550.h: Unify structure declaration for registers
+
+ Instead of special casing the different access patterns, use common
+ code with light macros sprinkled in to accomodate for the different
+ layouts of the register structure.
+
+ Note that this also changes the types of the registers for the
+ "positively packed (>1)" cases. As the registers truly are unsigned
+ chars, this is surely the Right Thing, but it is a semantic change.
+ Note that for this case depending on the endianness on the bus, we may
+ see a change of behaviour.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0a145ce6e7075aa0f4869d6f6149a5ff205d95df
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:52 2009 -0500
+
+ Delete now unused tools/Makefile.win32
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 2f8d396b9302eddcd8d552648e101a46b7a80acd
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:51 2009 -0500
+
+ Add support for building native win32 tools
+
+ Add support for compiling the host tools in the tools directory using
+ the MinGW toolchain. This produces executables which can be used on
+ standard Windows computers without requiring cygwin.
+
+ One must specify the MinGW compiler and strip utilities as if they
+ were the host toolchain in order to build win32 executables, eg:
+
+ make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit e50abf662efbf4ce0e731062c8d3c8ec54763ae2
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:50 2009 -0500
+
+ tools/Makefile: Simplify HOST_CFLAGS/HOST_LDFLAGS generation
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit b0d4d7219a4806e46affc96bd1f65397194a6e72
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:49 2009 -0500
+
+ tools/Makefile: Create generic build rules
+
+ Create a few generic build rules to replace the current method which has
+ 1 build target for each file
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 273174ddbcce215c42f6c307470cd5580a3f72bf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:48 2009 -0500
+
+ tools/Makefile: Use auto-generated object file dependencies
+
+ Files in the SRCS variable have their dependencies automatically
+ generated so remove duplicate explicit dependencies
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fb8b33c1e6d621ea3347a75ad3a42a386b44e589
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:47 2009 -0500
+
+ tools/Makefile: Remove symlinks for remaining source files
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit eed073315b6447eceadf7468a4c2b757442c7c6f
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:46 2009 -0500
+
+ tools/Makefile: Dynamically generate libfdt object dependencies
+
+ Add the libfdt files to the SRCS variable so that they have their
+ dependencies automatically generated
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit c0170175393b94560fa7a5da6dd31377df5f4a72
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:45 2009 -0500
+
+ tools/Makefile: Remove symlinks for fdt targets
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 45d6bdff68877ea214ff33cc1c89a29c76e96f51
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:44 2009 -0500
+
+ tools/Makefile: Add libfdt/ to the include search path
+
+ This change makes the process of symlinking libfdt_internal.h
+ unnecessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit fba0e3a0814f9bf48c32a4c8a7987c36ae96651b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:43 2009 -0500
+
+ tools: Remove unecessary symlinking of zlib.h
+
+ crc32.c uses the zlib.h header in include/u-boot/zlib.h. The symlink
+ was previously necessary to give U-Boot's version of zlib.h precedence
+ over the host computer's version of zlib.h.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 40b8d909ace06f6f494dee08ffa64a82493e72e9
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:42 2009 -0500
+
+ tools/Makefile: Add tools/ to the include search path
+
+ This change makes the process of symlinking mkimage.h and fdt_host.h
+ unnecessary
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 1cd300de5e19c9e8383ee2eb2b6bd3b8b9378c78
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:41 2009 -0500
+
+ tools/Makefile: Compile ncb when CONFIG_NETCONSOLE
+
+ Also conditionally add ncb.o to OBJ_FILES list
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 123c48a21ce08b4a33f36e96cc75f92324e761d7
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:40 2009 -0500
+
+ tools/Makefile: Make gen_eth_addr dependent upon CONFIG_CMD_NET
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 4d93a0a807b8ca0289ba5da00c646cd2d54af120
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:39 2009 -0500
+
+ tools/Makefile: Make envcrc dependent upon CONFIG_ENV_IS_EMBEDDED
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit cd26a31a23f9a58ba52870f8ffb57d77d1baee20
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:38 2009 -0500
+
+ tools/Makefile: Make inca-swap-bytes dependent on CONFIG_INCA_IP
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 7cd5cbc34699ccc15d0277f48375cad928d04faf
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:37 2009 -0500
+
+ tools/Makefile: Make ubsha1 dependent upon CONFIG_SHA1_CHECK_UB_IMG
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit eeba8617908e33f7e7db3b1588c04ca65b856793
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:36 2009 -0500
+
+ tools/Makefile: Make img2srec dependent upon CONFIG_CMD_LOADS
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 335ffe7e0e0a30e90ce409c3279016a582157d8e
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:35 2009 -0500
+
+ tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit ee3584a5970230ee96aae19505ad3226734ee4ff
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:34 2009 -0500
+
+ tools/Makefile: Split variable declarations into multiple lines
+
+ Split variable declarations into multiple lines and use the standard
+ VAR-y convention. Also move object and binary variable declarations to
+ after config.mk has been included to allow for these lists to utilize
+ the CONFIG_XXX variables.
+
+ These changes lay the groundwork for conditional compilation of files
+ in the tools directory.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 21d28e95ed874ab1ed9787f939d8a53e99d30ddb
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:33 2009 -0500
+
+ tools/Makefile: Remove inappropriate double-tabs
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 652f4ba076689fd0acd447561a777b1c440a4b57
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:32 2009 -0500
+
+ tools/Makefile: Remove HOSTARCH HOSTOS defines
+
+ The values of HOSTARCH and HOSTOS which are exported from the top-level
+ Makefile should be used
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 2eeb4e95fbfafe54645fae7ec0b2594101f0573b
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:31 2009 -0500
+
+ gen_eth_addr: Use POSIX rand() and srand()
+
+ Replace random()/srandom() use with rand()/srand() to support
+ compilation with the mingw toolchain. The rand()/srand() functions are
+ generally more common and are functionally equivalent to the original
+ random()/srandom() calls.
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 24d2ae5e9debe4b75151a55251031a14477fa875
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:28 2009 -0500
+
+ elf.h: Use stdint.h to provide standard typedefs for WIN32
+
+ The original code provided an incomplete set of typedefs for WIN32
+ compiles and replicated the standard typedefs that are already
+ provided by stdint.h
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit a706bfc7d0e2d1935c5670045288e6cd1ffdfabc
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:27 2009 -0500
+
+ common/Makefile: Conditionally compile env_embedded.o
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 2b48f7d5f62835f87278efb498397b6ae9e2d117
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:26 2009 -0500
+
+ Makefile: Add removal of *.exe files to clean target
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit d0d6144e0e4a03a68311b781f3dde38dc9316b82
+Author: Peter Tyser <ptyser@xes-inc.com>
+Date: Fri Mar 13 18:54:25 2009 -0500
+
+ Makefile: Make autoconf.mk a dependency of the depend target
+
+ The original code did not generate autoconf.mk until after some targets
+ dependencies had already been calculated, for example the directories in
+ the SUBDIRS variable
+
+ Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
+
+commit 75eb82ec7cacb18d059d701b35677b93d2bb7596
+Author: unsik Kim <donari75@gmail.com>
+Date: Wed Feb 25 11:31:24 2009 +0900
+
+ mflash: Initial mflash support
+
+ Mflash is fusion memory device mainly targeted consumer eletronic and
+ mobile phone.
+ Internally, it have nand flash and other hardware logics and supports
+ some different operation (ATA, IO, XIP) modes.
+
+ IO mode is custom mode for the host that doesn't have IDE interface.
+ (Many mobile targeted SoC doesn't have IDE bus)
+
+ This driver support mflash IO mode.
+
+ Followings are brief descriptions about IO mode.
+
+ 1. IO mode based on ATA protocol and uses some custom command. (read
+ confirm, write confirm)
+ 2. IO mode uses SRAM bus interface.
+
+ Signed-off-by: unsik Kim <donari75@gmail.com>
+
+commit 200779e3e2a9aeda7030b171a8c39d7797019917
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Apr 3 11:53:01 2009 +0200
+
+ Rename common ns16550 constants with UART_ prefix to prevent conflicts
+
+ Fix problems introduced in commit
+ 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware
+ diagnosis functions for inka4x0] which redefined MSR_RI which is
+ already used on PowerPC systems.
+
+ Also eliminate redundant definitions in ps2mult.h. More cleanup will
+ be needed for other redundant occurrences though.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 99067b08f4a0ce20ff337a35211239f334d8f451
+Author: Scott Wood <scottwood@freescale.com>
+Date: Wed Apr 1 15:33:24 2009 -0500
+
+ Noisily disable the legacy NAND subsystem.
+
+ Legacy NAND is marked for feature removal after April 2009 (i.e. this
+ upcoming release). There are still several boards that reference it
+ (though many do so only for disk-on-chip support which has been silently
+ disabled for a while now). These boards will now fail to build
+ with #error, though the code is still there if the user removes #error.
+
+ The plan is to remove the code outright in the next release, along with
+ any board code that refers to it (such as board/esd/common/auto_update.c).
+
+ Also, remove the legacy NAND API description from README.nand.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 69bcabb51686fdd133cb1848c0d3b0a4fc6ca5cf
+Author: apgmoorthy <moorthy.apg@samsung.com>
+Date: Fri Mar 27 14:45:23 2009 +0530
+
+ Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN
+
+ Currently OneNAND initial program loader (ipl) reads only block 0 ie 128KB.
+ However, u-boot image for apollon board is 195KB making the board
+ unbootable with OneNAND.
+
+ Fix ipl to read CONFIG_SYS_MONITOR_LEN.
+ CONFIG_SYS_MONITOR_LEN macro holds the U-Boot image size.
+
+ Signed-off-by: Rohit Hagargundgi <h.rohit@samsung.com>
+ Signed-off-by: Gangheyamoorthy <moorthy.apg@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 74de7aefd79690bae8cf5a5120f5962d444be089
+Author: Wolfgang Denk <wd@denx.de>
+Date: Wed Apr 1 23:34:12 2009 +0200
+
+ Add "source" command; prepare removal of "autoscr" command
+
+ According to the doc/feature-removal-schedule.txt, the "autoscr"
+ command will be replaced by the "source" command in approximately 6
+ months from now.
+
+ This patch prepares this change and starts a 6 month transition
+ period as follows:
+
+ - The new "source" command has been added, which implements exactly
+ the same functionlaity as the old "autoscr" command before
+ - The old "autoscr" command name is kept as an alias for compatibility
+ - Command sequences, script files atc. have been adapted to use the
+ new "source" command
+ - Related environment variables ("autoscript", "autoscript_uname")
+ have *not* been adapted yet; these will be renamed resp. removed in
+ a separate patch when the support for the "autoscr" command get's
+ finally dropped.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 78237df55248034a2d7c2daea992b9dbe7ca8e96
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Apr 2 17:31:09 2009 +0200
+
+ Add "GPL cleanup" task to feature-removal-schedule.txt
+
+ Announce removal of all non-GPL or GPL-incompatible files
+ after August 2009.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit d9596ffbdc79cea285010b67dd20a4618303f624
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Apr 2 12:51:28 2009 -0400
+
+ sf: stmicro: dont send 4 bytes when reading status register
+
+ I can't find anywhere in the datasheet that says the status register needs
+ 3 dummy bytes sent to it before being able to read back the first real
+ result. Tests on a Blackfin board show that after writing the opcode, the
+ status register starts coming back immediately. So only write out the
+ read status register opcode before polling the result.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Jason McMullan <mcmullan@netapp.com>
+ CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 1abe365ffcfc29c061e8fd8b45551be5ad1428dd
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Apr 2 08:11:31 2009 -0400
+
+ sf: set common timeouts in seconds, not milliseconds
+
+ Since timeouts are only hit when there is a problem in the system, we
+ don't want to prematurely timeout on a functioning setup. Thus having
+ low timeouts (in milliseconds) doesn't gain us anything in the production
+ case, but rather increases likely hood of causing problems where none
+ otherwise exist.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 2a6ce1115b3cbe746965cfa0058ce645b6c1ada1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Apr 2 06:51:49 2009 -0400
+
+ sf: stmicro: use common page timeout define
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 0dcdbb172c2fdf60c5c578980308b312fd56496f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Mar 28 06:41:09 2009 -0400
+
+ sf: always read 5 bytes for the idcode
+
+ Some SPI flash drivers like to have extended id information available
+ (like the spansion flash), so rather than making it re-issue the ID cmd
+ to get at the last 2 bytes, have the common code read 5 bytes rather than
+ just 3. This also matches the Linux behavior where it always reads 5 id
+ bytes from all flashes.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ CC: Mingkai Hu <Mingkai.hu@freescale.com>
+
+commit 9726ba4abaa16cd6c385ad350d403f98a8eacf52
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Mar 27 16:34:21 2009 -0400
+
+ sf: stmicro: drop redundant id read
+
+ The common SPI flash code reads the idcode and passes it down to the SPI
+ flash driver, so there is no need to read it again ourselves.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ CC: Jason McMullan <mcmullan@netapp.com>
+ CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+
+commit 1c5874374e091b4bb62917c519861f7682fe066e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Mar 27 19:27:58 2009 -0400
+
+ sf: add driver for SST flashes
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit f773a1bbdb8f3bf1ddab2874f36f043c4f8f044d
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 23 23:03:58 2009 -0400
+
+ sf: drop DEBUG defines
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 6b850a9fa8a216f3692da2511cb1a6c16409b1af
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 4 07:44:07 2009 +0100
+
+ mtd: add some at45 spi flash support
+
+ - AT45DB321D
+ - AT45DB161D
+ - AT45DB081D
+ - AT45DB041D
+ - AT45DB021D
+ - AT45DB011D
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6805e4bf83e6f444f7411101228766c8a7aec5f7
+Author: Mingkai Hu <Mingkai.hu@freescale.com>
+Date: Tue Mar 31 14:09:41 2009 +0800
+
+ mtd: SPI Flash: Support the Spansion Flash
+
+ Add MTD SPI Flash support for S25FL008A, S25FL016A,
+ S25FL032A, S25FL064A, S25FL128P.
+
+ Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 40587701924aa0afc86b3840421b4cc6de42c748
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 30 20:56:45 2009 -0400
+
+ Blackfin: force all boards to HZ of 1000
+
+ Since the Blackfin timer code requires HZ to be 1000, barf on any board
+ that tries to use a different value.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f4032d2eec9d71a59c6c724671e577f67a76839b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Mar 27 21:07:45 2009 -0400
+
+ Blackfin: bf533-stamp: drop old spi flash driver
+
+ Now that the common SPI flash code supports all the flashes, we can stop
+ using the old driver.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bc72f50a659d0d1b551817e1910b9b2be1c7e496
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Mar 26 15:42:12 2009 -0400
+
+ Blackfin: add BF538/BF539 SPI portmux handling
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 46ac352f0f9406a5f9aa157ac62867fb4650dfd3
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 23 22:36:10 2009 -0400
+
+ Blackfin: do not delay on output bytes
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit dbc6ab9f75bd0c13d3f42692e9463f8ab65fc382
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Mar 23 22:17:27 2009 -0400
+
+ Blackfin: drop newline from OTP help
+
+ Looks like I accidentally added a newline to the OTP help when merging and
+ older change.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d3c38d96b991d641a33f7748130dae008563cdc9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Mar 22 23:43:31 2009 -0400
+
+ Blackfin: convert bfin_sdh to legacy mmc
+
+ The Blackfin SDH controller is still using the legacy framework, so update
+ the driver to use the renamed functions.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d248cfb2d940b742f6bfdba9b832a3df96da3101
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 22 16:30:38 2009 -0500
+
+ Blackfin: bf537-stamp: split CF/IDE code out into dedicated cf-ide.c
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit ad9073211ca9e62162a39851e082b8d07a662fb6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Feb 13 17:10:58 2009 -0500
+
+ Blackfin: fix crash when booting from external memory
+
+ When testing a u-boot binary that hasn't been booted from the bootrom, we
+ have to make sure the bootstruct structure has sane storage space. If we
+ don't, the initcode will crash when it tries to dereference an invalid
+ pointer.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 84a9dda324c3faa56be14449d7519b993d9397a9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:32:52 2008 -0400
+
+ Blackfin: bf518f-ezbrd: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0c31ddf7b70f77dede42dc82ecab7753a819acaa
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:30:48 2008 -0400
+
+ Blackfin: bf526-ezbrd: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5c45f7cac2f74e2c14aa6b028cd969651cc9ac8e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 21:25:33 2008 -0400
+
+ Blackfin: bf538f-ezkit: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d9a5d113b93583c984711127ab8503e136ed1e4a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 20:59:12 2008 -0400
+
+ Blackfin: bf527-ezkit: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 76d21803ddd7dc4bcb81739ea2d3cd679e052f46
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 05:05:42 2008 -0400
+
+ Blackfin: bf548-ezkit: new board port
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 67b89c79e72fe86b0ea0199425d880630beb95d8
+Author: Laurent Gregoire <laurent.gregoire@tomtom.com>
+Date: Tue Mar 3 14:23:59 2009 +0100
+
+ libfdt: Fix C++ compile-time cast error on gnu 4.2.1
+
+ Allow the inclusion of libfdt.h in C++ source.
+
+ Signed-off-by: Laurent Gregoire <laurent.gregoire@tomtom.com>
+ Acked-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 13d93f38e86818739317b0206d597265cf9e675e
+Author: Emil Medve <Emilian.Medve@Freescale.com>
+Date: Mon Feb 23 10:43:36 2009 -0600
+
+ Fix a possible overflow case detected by gcc 4.3.2
+
+ .../dtc/libfdt/fdt_sw.c: In function 'fdt_end_node':
+ .../dtc/libfdt/fdt_sw.c:81: error: assuming signed overflow does not occur when assuming that (X + c) < X is always false
+
+ Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
+
+commit a22d9cfbb5bcfb3dc6ffd64d391b568e8a0ce383
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Feb 6 14:03:24 2009 +1100
+
+ libfdt: Rework/cleanup fdt_next_tag()
+
+ Currently, callers of fdt_next_tag() must usually follow the call with
+ some sort of call to fdt_offset_ptr() to verify that the blob isn't
+ truncated in the middle of the tag data they're going to process.
+ This is a bit silly, since fdt_next_tag() generally has to call
+ fdt_offset_ptr() on at least some of the data following the tag for
+ its own operation.
+
+ This patch alters fdt_next_tag() to always use fdt_offset_ptr() to
+ verify the data between its starting offset and the offset it returns
+ in nextoffset. This simplifies fdt_get_property() which no longer has
+ to verify itself that the property data is all present.
+
+ At the same time, I neaten and clarify the error handling for
+ fdt_next_tag(). Previously, fdt_next_tag() could return -1 instead of
+ a tag value in some circumstances - which almost none of the callers
+ checked for. Also, fdt_next_tag() could return FDT_END either because
+ it encountered an FDT_END tag, or because it reached the end of the
+ structure block - no way was provided to tell between these cases.
+
+ With this patch, fdt_next_tag() always returns FDT_END with a negative
+ value in nextoffset for an error. This means the several places which
+ loop looking for FDT_END will still work correctly - they only need to
+ check for errors at the end. The errors which fdt_next_tag() can
+ report are:
+ - -FDT_ERR_TRUNCATED if it reached the end of the structure
+ block instead of finding a tag.
+
+ - -FDT_BADSTRUCTURE if a bad tag was encountered, or if the
+ tag data couldn't be verified with fdt_offset_ptr().
+
+ This patch also updates the callers of fdt_next_tag(), where
+ appropriate, to make use of the new error reporting.
+
+ Finally, the prototype for the long gone _fdt_next_tag() is removed
+ from libfdt_internal.h.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit 2c0b843e710aa1e2da25c2592e6dbe5d0b0ab7da
+Author: David Gibson <david@gibson.dropbear.id.au>
+Date: Fri Feb 6 14:01:56 2009 +1100
+
+ libfdt: Rework fdt_next_node()
+
+ Currently fdt_next_node() will find the next node in the blob
+ regardless of whether it is above, below or at the same level in the
+ tree as the starting node - the depth parameter is updated to indicate
+ which is the case. When a depth parameter is supplied, this patch
+ makes it instead terminate immediately when it finds the END_NODE tag
+ for a node at depth 0. In this case it returns the offset immediately
+ past the END_NODE tag.
+
+ This has a couple of advantages. First, this slightly simplifies
+ fdt_subnode_offset(), which no longer needs to explicitly check that
+ fdt_next_node()'s iteration hasn't left the starting node. Second,
+ this allows fdt_next_node() to be used to implement
+ _fdt_node_end_offset() considerably simplifying the latter function.
+
+ The other users of fdt_next_node() either don't need to iterate out of
+ the starting node, or don't pass a depth parameter at all. Any
+ callers that really need to iterate out of the starting node, but keep
+ tracking depth can do so by biasing the initial depth value.
+
+ This is a semantic change, but I think it's very unlikely to break any
+ existing library users.
+
+ Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
+
+commit c123098035be8bae3859bbfbd06861f197c07631
+Author: Scott Wood <scottwood@freescale.com>
+Date: Tue Mar 31 17:49:36 2009 -0500
+
+ mpc83xx: Set guarded bit on BAT that covers the end of the address space
+
+ The mpc8313erdb board currently sets DBAT6 to cover all of the final 256MiB of
+ address space; however, not all of this space is covered by a device. In
+ particular, flash sits at 0xfe000000-0xfe7fffff, and nothing is mapped
+ at the far end of the address space.
+
+ In zlib, there is a loop that references p[-1] if p is non-NULL. Under
+ some circumstances, this leads to the CPU speculatively loading from
+ 0xfffffff8 if p is NULL. This leads to a machine check.
+
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+ continuation to the remaining mpc83xx boards that suffer from the same problem.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit c2eb8be7f760a2efe30a495bfb10857838dcf3fa
+Author: Kim Phillips <kim.phillips@freescale.com>
+Date: Mon Mar 30 14:28:05 2009 -0500
+
+ rtc: remove broken rtc_read and rtc_write declarations
+
+ commit 04e11cf3 "rtc: add support for 4543 RTC (manufactured by e.g.
+ EPSON)" introduces the following build error on boards configuring e.g,
+ the ds1374 rtc:
+
+ Configuring for MPC837XEMDS board...
+ ds1374.c:103: error: static declaration of 'rtc_read' follows non-static declaration
+ /home/r1aaha/git/u-boot/include/rtc.h:64: error: previous declaration of 'rtc_read' was here
+ ds1374.c:104: error: conflicting types for 'rtc_write'
+ /home/r1aaha/git/u-boot/include/rtc.h:65: error: previous declaration of 'rtc_write' was here
+
+ this reverts the erroneous chunk.
+
+ Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
+ Acked-by: Detlev Zundel <dzu@denx.de>
+ CC: Detlev Zundel <dzu@denx.de>
+ CC: Andreas Pfefferle <ap@denx.de>
+
+commit fc39c2fd51e64707de4d61ed49479ebea2847e1b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Mar 31 17:58:13 2009 -0500
+
+ 85xx/86xx: Ensure MP boot page is not used
+
+ We had a bug on 86xx in which the boot page used to bring up secondary
+ cores was being overwritten and used for the malloc region in u-boot.
+
+ We need to reserve the region of memory that the boot page is going to
+ be put at so nothing uses it.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
+
+commit c840d26c752141b94bbc24ac748ddd45752a955a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Mar 31 23:11:05 2009 -0500
+
+ 85xx: Introduce determine_mp_bootpg() helper.
+
+ Match determine_mp_bootpg() that was added for 86xx. We need this to
+ address a bug introduced in v2009.03 with 86xx MP booting. We have to
+ make sure to reserve the region of memory used for the MP bootpg() so
+ other u-boot code doesn't use it.
+
+ Also added a comment about how cpu_reset() is dealing w/an errata on
+ early 85xx MP HW.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 7649a590b53ee548f41428bf20780f74ce9fc099
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Tue Mar 31 23:02:38 2009 -0500
+
+ 86xx: Cleanup MP support
+
+ * Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx
+ * Introduce determine_mp_bootpg() helper. We'll need this to address a
+ bug introduced in v2009.03 with 86xx MP booting. We have to make sure
+ to reserve the region of memory used for the MP bootpg() so other
+ u-boot code doesn't use it.
+ * Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to
+ allow cmd_mp.c to build and work. In the future we should look at
+ implementing all these functions. This could be common w/85xx if we
+ use spin tables on 86xx.
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit f6ef8b7a43ed7f68a4bb524faad5e4f75ea3e3e2
+Author: Becky Bruce <beckyb@kernel.crashing.org>
+Date: Tue Mar 31 18:38:37 2009 -0500
+
+ mpc8641hpcn/sbc8641d: Add missing board_lmb_reserves
+
+ We're missing the board_lmb_reserve definitions that allow
+ cpu_mp_lmb_reserve to be called; this means that Linux
+ is free to reallocate reserved pages. Linux currently boots
+ because we're getting lucky - the page we've reserved is
+ high enough in memory that it isn't allocated by Linux
+ while we still need it to be in existence.
+
+ Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0fc4f64c59873a47d555dd66bad25797d4ecb0ed
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Tue Mar 31 13:43:10 2009 +0200
+
+ NetStar: fix NAND
+
+ Fix NAND support broken during new NAND code merge. Move those few lines of
+ code to board/netstar/netstar.c
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit d144f94d590b5190a9963bd0f2026b2a7ce67eda
+Author: Jens Scharsig <esw@bus-elektronik.de>
+Date: Tue Mar 31 08:18:29 2009 +0200
+
+ soft_i2c.c compiler/linker error
+
+ This patch fix the compiler/linker errors
+
+ common/cmd_i2c.c:1252: undefined reference to `i2c_get_bus_speed'
+ common/cmd_i2c.c:1256: undefined reference to `i2c_set_bus_speed'
+
+ if board use CONFIG_I2C_CMD_TREE and CONFIG_I2C_MULTI_BUS is not
+ uesd/undef (wrong define order)
+
+ and
+
+ removes additional empty lines
+
+ Signed-off-by: Jens Scharsig <esw@bus-elektronik.de>
+
+commit 765547dc5e0e8cbe6b8f4ea8a5d6ff237935c352
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Mar 27 17:02:45 2009 -0400
+
+ MPC85xx: Add MPC8569MDS board support
+
+ This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD
+ EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 22b6dbc1696d927d938dd4e16f65d83c0d4fb3f4
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Fri Mar 27 17:02:44 2009 -0400
+
+ MPC85xx: Add MPC8569 CPU support
+
+ There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of
+ LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage,
+ then invalidate it after LBCR bit 13 is set.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 2d4de6ae5be54b367a72a7ef4e0cf36a9cd4881f
+Author: Haiying Wang <Haiying.Wang@freescale.com>
+Date: Thu Mar 26 17:01:49 2009 -0400
+
+ MPC85xx: Load and enable QE microcode patch in IRAM
+
+ For the silicon which doesn't have ROM support in QE, it always needs to load
+ a pre-built ucode binary to IRAM so that QE can work.
+
+ Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
+ Signed-off-by: Hillel Avni <Hillel.Avni@freescale.com>
+
+commit 1b3e4044a28a3d95b0aad41bdc52482bb2cc9b2b
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 19 09:16:10 2009 -0500
+
+ 85xx: Add support for additional e500mc features
+
+ * Enable backside L2
+ * e500mc no longer has timebase enable in HID (moved to CCSR register)
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit c360ceac0286159f94d9d1a9496fc9858c8d9bec
+Author: Dave Liu <daveliu@freescale.com>
+Date: Sat Mar 14 12:48:30 2009 +0800
+
+ fsl-ddr: add the DDR3 SPD infrastructure
+
+ - support mirrored DIMMs, not support register DIMMs
+ - test passed on P2020DS board with MT9JSF12872AY-1G1D1
+ - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1
+
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+ Signed-off-by: Travis Wheatley <travis.wheatley@freescale.com>
+
+commit 6a8197836702991468cead5ead073f589e2623ad
+Author: Dave Liu <daveliu@freescale.com>
+Date: Sat Mar 14 12:48:19 2009 +0800
+
+ fsl-ddr: Fix two bugs in the ddr infrastructure
+
+ 1. wr_lat
+ UM said the total write latency for DDR2 is equal to
+ WR_LAT + ADD_LAT, the write latency is CL + ADD_LAT - 1.
+ so, the WR_LAT = CL - 1;
+ 2. rd_to_pre
+ we missed to add the ADD_LAT for DDR2 case.
+
+ Reported-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
+ Signed-off-by: Dave Liu <daveliu@freescale.com>
+
+commit 540dcf1cb86961e11aa92c47671f27762c581d8c
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 26 01:34:39 2009 -0500
+
+ 83xx: Use common LSDMR defines from asm/fsl_lbc.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+ Acked-by: Kim Phillips <kim.phillips@freescale.com>
+
+commit b0fe93eda69721aef1fdef576164b668fad83bbd
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 26 01:34:38 2009 -0500
+
+ 85xx: Use common LSDMR defines from asm/fsl_lbc.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 0088c298f0eeb90ec001f744e9959dea83dd563a
+Author: Kumar Gala <galak@kernel.crashing.org>
+Date: Thu Mar 26 01:34:37 2009 -0500
+
+ Add LSDMR (SDRAM Mode Register) definition on localbus
+
+ The masks for various bit defines of LSDMR are common and thus we can
+ define them in one place rather than replicating them in each config.h
+
+ Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+
+commit 89c00fb15859213788f0ad089934c376fb356099
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 30 18:58:41 2009 +0200
+
+ OMAP: use {read,write}l to access timer registers
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 81472d893fa565c9d300928a40e504a689bde131
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 30 18:58:41 2009 +0200
+
+ OMAP: rename timer divisor
+
+ Divisor field is called PTV not PVT.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit fe672d60b2a8c9e803596ba4533fa1776015551d
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 30 18:58:40 2009 +0200
+
+ OMAP: reindent timer code
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit b3f66b0ba09949e0796ce7fad6367f75f15ed890
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:40 2009 +0200
+
+ s3c2410: move nand driver to drivers/mtd/nand
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d3b635774194404bcd424f6b376419bce22076ad
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:40 2009 +0200
+
+ s3c24x0: move i2c driver to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 300f99f4539dd5caf7e19af5e4ea5eb259445913
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:39 2009 +0200
+
+ s3c24x0: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 942ba9969b9efa25f816c238861ecb339c54ed73
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:39 2009 +0200
+
+ davinci: move i2c driver to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ee4f3e2765a1c65c9861c5d2cf2e6feb84b90bd8
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:39 2009 +0200
+
+ davinci: move nand driver to drivers/mtd/nand
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d3e55d0774a180c1837bd7ddec464015e883bd86
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Mon Mar 30 18:58:38 2009 +0200
+
+ imx: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 2344bb8de2354101a8264c2123303c9d8d2aed3c
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:36 2009 +0200
+
+ inka4x0: Use proper accessor macros for memory mapped registers.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e979e85fd39b06436922bb4d6bb5fafcbc775182
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:35 2009 +0200
+
+ inka4x0: Add hardware diagnosis and RTC in configuration.
+
+ This patch adds the board specific communication routines needed by
+ the external 4543 RTC.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Signed-off-by: Andreas Pfefferle <ap@denx.de>
+
+commit 7b5611cdd12ca0cc33f994f0d4a4454788fc3124
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:34 2009 +0200
+
+ inka4x0: Add hardware diagnosis functions for inka4x0
+
+ This patch adds advanced diagnosis functions for the inka4x0 board.
+
+ Signed-off-by: Andreas Pfefferle <ap@denx.de>
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 04e11cf383ff6231535fd981023bb1306b2133d4
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:33 2009 +0200
+
+ rtc: add support for 4543 RTC (manufactured by e.g. EPSON)
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Signed-off-by: Andreas Pfefferle <ap@denx.de>
+
+commit 572e6179adb5447ff42ec2aa5cf3a26decf97583
+Author: Detlev Zundel <dzu@denx.de>
+Date: Mon Mar 30 00:31:32 2009 +0200
+
+ drivers/twserial: Add protocol driver for "three wire serial" interface.
+
+ This pretty unintelligent interface is used on some RTC chips.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit a6ef3ddeafbe8007af3662cc4509b897c53ab395
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:42 2009 +0200
+
+ arm720t/clps7111: move serial driver to drivers/serial
+
+ add CONFIG_CLPS7111_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6790c55704531eb98f76b51d50e0f73d19fa2988
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:42 2009 +0200
+
+ lpc2292: move serial driver to drivers/serial
+
+ add CONFIG_LPC2292_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 176a600d0ecdaccbac483d2ba992d0119f853119
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:42 2009 +0200
+
+ ks8695: move serial driver to drivers/serial
+
+ add CONFIG_KS8695_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 6d27bca15d445fcf07d6e7e30ced95c945c875ea
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:42 2009 +0200
+
+ s3c64xx: move usb driver to drivers/usb
+
+ add CONFIG_USB_S3C64XX to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit ecfa8dda2f55e1fbe12dee0b5cc16e7d484674c9
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ imx31: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 9ea91c9fefb3920d735533a7798c1a44a3ed3ffc
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ netarm: move serial driver to drivers/serial
+
+ add CONFIG_NETARM_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 412ab705888742add435dd6ffc2e8bda14962235
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ sa1100: move serial driver to drivers/serial
+
+ add CONFIG_SA1100_SERIAL to activate the driver
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit b2368754a9202225fd072e159fb78da7d2cdb623
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ s3c44b0: extract cache from cpu.c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 40fd626223eae5363719bcb9a6896f08ceeee90a
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:41 2009 +0200
+
+ s3c44b0: move serial driver to drivers/serial
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 5fe1377cc46199fe71c47be4b1aa81440ae96f9f
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:40 2009 +0200
+
+ s3c44b0: move rtc driver to drivers/rtc
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 50f601cca8985615f9e3de4c34887448ade8a64b
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:40 2009 +0200
+
+ s3c44b0: move i2c driver to drivers/i2c
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 281dfb0c0c531194f99e60d6285cca4e2a9fb1b6
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 29 23:01:36 2009 +0200
+
+ s3c4510b: move specific code to soc directory
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 04531f3c11c693dc54924f82c41979d960309c9d
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Mar 25 23:43:58 2009 +0100
+
+ NetStar: add RTC support
+
+ Add RTC support.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 71f7bd305d9768bcb7ddbe4b5823cbf3b3597b11
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Wed Mar 25 23:43:50 2009 +0100
+
+ NetStar: use generic flash driver
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 3f464b0fc009d41d2734c08e472eb6d445f73a5c
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 16 23:31:20 2009 +0100
+
+ NetStar: update crcit utility
+
+ Make crc32 function to match its prototype. Use more meaningful identifiers.
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 488f5d8790c451fc527fe5d2ef218f2a5e40ea17
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 23 17:46:27 2009 +0100
+
+ Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+
+commit 88685b5f62274167ad2ba8a58e108d89ff71955b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 29 00:58:16 2009 +0100
+
+ VCMA9: fix compile errors
+
+ Fix these:
+ cmd_vcma9.c:82: warning: implicit declaration of function 'eth_getenv_enetaddr'
+ cmd_vcma9.c:89: error: 'enetaddr' undeclared (first use in this function)
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 26e42cbd786241fec370a0b92ad591f4e9cc423b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Mar 29 00:54:21 2009 +0100
+
+ ARM: fix warning: 'print_eth' defined but not used
+
+ This warning got issued for all ARM systems that don't have
+ CONFIG_CMD_NET enabled.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit fd88d91a639ce41b825c8d50dc2182050e98fe53
+Author: Ladislav Michl <ladis@linux-mips.org>
+Date: Mon Mar 23 18:16:34 2009 +0100
+
+ cs8900 compile fix
+
+ cs8900.c: In function 'eth_init':
+ cs8900.c:164: warning: passing argument 2 of 'eth_getenv_enetaddr' from incompatible pointer type
+ cs8900.c:165: error: invalid operands to binary <<
+ cs8900.c:166: error: invalid operands to binary <<
+ cs8900.c:167: error: invalid operands to binary <<
+
+ Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
+ Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit d2567be915036720693f3ddd00c39b5b4d86fb8d
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 28 20:16:16 2009 +0100
+
+ Fix implicit declaration of function 'eth_[gs]etenv_enetaddr'
+
+ ...and some other compile warnings.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 97b05d7d524a6b4f195f07b8f90e98561a85596c
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 28 16:17:29 2009 +0100
+
+ mpc8xx/ether.c: fix warning: unused variable 'bd'
+
+ Also minor coding style cleanup.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 2dce551e10728f9e5655279f761f1d3cc0a8fe90
+Author: Detlev Zundel <dzu@denx.de>
+Date: Wed Mar 25 17:27:52 2009 +0100
+
+ command.c: Expose the core of do_help as _do_help to the rest of u-boot.
+
+ Other commands implementing subcommands can reuse this code nicely.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+ Signed-off-by: Andreas Pfefferle <ap@denx.de>
+
+commit 4e325fbfa4dea04eceb6392e00807c40d214dc6f
+Author: Detlev Zundel <dzu@denx.de>
+Date: Tue Mar 24 18:02:33 2009 +0100
+
+ mpc5xxx: Add structure definition for several more register blocks.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 739b0e594677a0676577bc95db4495a5563fc7f8
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Mar 27 15:03:55 2009 +0100
+
+ MAINTAINERS: Add entry for 'inka4x0' board.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit e55ecec45340755ef47cbbb13fb35ceed60eb115
+Author: Detlev Zundel <dzu@denx.de>
+Date: Fri Mar 27 15:03:54 2009 +0100
+
+ MAINTAINERS: Keep list sorted.
+
+ Signed-off-by: Detlev Zundel <dzu@denx.de>
+
+commit 0baeca4b09b703728f8e66b52418039fd8f8ce35
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Mar 26 11:17:41 2009 -0400
+
+ karef/metrobox/xpedite1k: fix eth_setenv_enetaddr typos
+
+ The function is called "eth_setenv_enetaddr", not "eth_putenv_enetaddr".
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 76756e41cde0a617e781a604cc47dfaef63697cd
+Author: Heiko Schocher <hs@denx.de>
+Date: Thu Mar 26 07:33:59 2009 +0100
+
+ ppc: cleanup compiler errors/warnings
+
+ Current u-boot top of tree builds with warnings/errors for
+ the following boards:
+
+ ads5121 cpci5200 mecp5200 v38b IAD210 MBX MBX860T NX823
+ RPXClassic debris PN62
+
+ following patch solves this.
+
+ Signed-off-by: Heiko Schocher <hs@denx.de>
+ Acked-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3edf68c47fdd52f19c1e840771c19ba90cf5ced1
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 26 16:14:13 2009 +0100
+
+ ppc4xx: Sequoia: Fix TLB reassignment in NAND booting code
+
+ This patch fixes a bug in the Sequoia TLB init code to reconfigure
+ the correct TLB (boot space) after running from RAM. This bug was
+ introduced with patch 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed
+ [ppc4xx: Make Sequoia boot vxWorks] which changed the order of the
+ TLB in the Sequoia init.S file.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e2b66fe453a3679f807b37fc5923d89214302764
+Author: Wolfgang Denk <wd@denx.de>
+Date: Thu Mar 26 10:00:57 2009 +0100
+
+ ads5121: enable instruction cache
+
+ Enabling the instruction cache significantly accelerates U-Boot
+ operations like CRC checking, image uncompression, etc.
+
+ Kudos to Andrea Scian for pointing out.
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
+commit 33e88c557b29c84c52039ba05993fa70fe62afe3
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Sun Mar 22 22:55:45 2009 -0400
+
+ mpc5200: suppress printf until console initialized
+
+ On boards which have the environment in eeprom, i2c_init() is called
+ before the console and RAM are initialized.
+ Suppress printfs until the console is initialized.
+
+ Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
+ Acked-by: Heiko Schocher <hs@denx.de>
+
+commit 0c6926736effbb9a19047949b7e9b3e8feab7c46
+Author: Guennadi Liakhovetski <lg@denx.de>
+Date: Wed Mar 25 11:36:50 2009 +0100
+
+ ARM: Add the imx31_phycore_eet board to MAKEALL
+
+ Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
+
+commit 917cfc70c18b74fa8a80189bdce8395199fa8360
+Author: Nishanth Menon <nm@ti.com>
+Date: Wed Mar 25 22:13:56 2009 +0100
+
+ OMAP3:Beagle: Enable mtdparts
+
+ http://www.denx.de/wiki/DULG/UBootCmdGroupFlash#UBootCmdFlMtdparts
+ provides a flexible way to create and maintain u-boot mtd
+ partitions. This allows commands such as "nand erase fs"
+ to work and the user no longer needs to decode the absolute
+ nand offsets. This patch enables this function for beagleboard
+
+ Signed-off-by: Nishanth Menon <nm@ti.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 4de1a5daab079ddc8ce1274144700203d692105c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 22 16:26:35 2009 -0500
+
+ Blackfin: bf537-stamp: split post code out into dedicated post.c
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5e8f245743ed14c89e495ba2c027703db9813160
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:51:56 2008 -0400
+
+ Blackfin: add support for S25FL128 parts
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bf1e028bf3eab1d702fa0627cade4460688f3913
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:51:23 2008 -0400
+
+ Blackfin: overhaul SPI flash handling to speed things up
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit efcc08cededa2168b96f12a22a5872340880d334
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:51:05 2008 -0400
+
+ Blackfin: add support for SST SPI flashes
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 5b8cfbe63f7242ebb1008f30bbbc85a9d54b38cf
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:50:10 2008 -0400
+
+ Blackfin: add hack for crappy m25p80
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 6f5fd56f0832ea5c254e2e4be84ea21fc8ecd5c5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Jan 21 20:47:12 2009 -0500
+
+ Blackfin: bf537-stamp: increase monitor size
+
+ The new jffs2 code pushed the code size just over the limit, so increase
+ the limit a bit more.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit f82caaccc87e1f76448ff42a6b930e59797e4f65
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Dec 8 16:16:11 2008 -0500
+
+ Blackfin: bf537-stamp: bump default SCLK up to 125MHz
+
+ Since all of the bf537-stamp and bf537-ezkit boards out there can handle it,
+ increase the speed of SCLK to 125MHz rather than 100MHz.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 751e54c3b77311b720b794813cce20546f288ada
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:44:14 2008 -0400
+
+ Blackfin: bf537-stamp: rewrite MAC-in-flash handling
+
+ Use the common net eth functions to setup the env/global data with the MAC
+ address, and properly handle the case where CONFIG_SYS_NO_FLASH is defined.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 88f9faffb383bbc6f23b8cc8519c5ffecfa2c8ad
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Dec 9 13:47:39 2008 -0500
+
+ Blackfin: add clkin_hz= to default kernel command line for ADI boards
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 9f64ba2412d3cede9eb1f290987e5c3a28df3232
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Oct 12 23:49:13 2008 -0400
+
+ Blackfin: bf533-stamp: bump up default clocks
+
+ Since the hardware can handle it, bump the default clocks from 80mhz SCLK
+ and 398mhz CCLK to 100mhz SCLK and 498mhz CCLK.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 23fd959eeaaa0434ac7f9c1191de66c76d97d699
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 22:40:22 2008 -0400
+
+ Blackfin: bf533-stamp: rewrite startup LED notifications
+
+ Again, don't clobber pins that we aren't actually using, and use the common
+ LED framework rather than our own hob-job-but-not-really-working.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit cf6f469e2730fc8ab3523808b828be000d6eee77
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 09:09:48 2008 -0400
+
+ Blackfin: unify common ADI board settings
+
+ Rather than duplicate the same ADI settings in every ADI board, create a
+ common ADI config header and have all ADI boards start using that. This
+ will also make merging the ~10 boards I have to forward port a lot easier.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 196c74311f394c6eb08bd9ab07a35671299b9851
+Author: Kyungmin Park <kmpark@infradead.org>
+Date: Tue Mar 3 09:05:53 2009 +0900
+
+ Reduce OneNAND IPL common code
+
+ OneNAND IPL has common codes for RAM init, load data, and jump to 2nd
+ bootloader, but it's common code used about 300~400 bytes. So board
+ specific codes, such as lowlevel_init, can't has enough code. It make
+ a difficult to implement OneNAND IPL.
+
+ his patch make this common code as small as possible. and give
+ lowlevel_init can have more codes.
+
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 16f2f5a351004129e79e79816697a367fd9e5446
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:24 2009 +0100
+
+ Add multi-chip NAND support for the TQM8548 modules
+
+ This patches configures the NAND UPM-FSL driver with multi-chip
+ support for the Micron MT29F8G08FAB NAND flash memory on the
+ TQM8548 modules.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 33846df28fa1f4cf96a96c18142d48d813caa892
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:23 2009 +0100
+
+ Add wait flags to support board/chip specific delays
+
+ The NAND flash on the TQM8548_BE modules requires a short delay after
+ running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE
+ requires a further short delay after writing out a buffer. Normally the
+ R/B pin should be checked, but it's not connected on the TQM8548_BE.
+ The corresponding Linux FSL UPM driver uses similar delay points at the
+ same locations. To manage these extra delays in a more general way, I
+ introduced the "wait_flags" field allowing the board-specific driver to
+ specify various types of extra delay.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 06e9f7df054d26d7f49c56bf9a6844b193ad6313
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:22 2009 +0100
+
+ Add support for TQM-specific chip select logic to FSL-UPM
+
+ For the NAND chips on the TQM8548 modules, a special chip-select logic is
+ used. It uses dedicated address lines to be set via UPM machine address
+ register (mar). This patch adds such support to the FSL-UPM driver.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit e93c1c169d49eda7babad9c781f541e2e34f0ff0
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:21 2009 +0100
+
+ Add multi chip support to the FSL-UPM driver
+
+ This patch adds support for multi-chip NAND devices to the FSL-UPM
+ driver. The "dev_ready" callback of the "struct fsl_upm_nand" is now
+ called with the argument "chip_nr" to allow testing the proper chip
+ select line. The NAND support of the MPC8360ERDK is updated as well.
+ No other boards are currently using the FSL UPM driver.
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 672ed2aee91b4856f6671fc72cd34168d8f1b624
+Author: Wolfgang Grandegger <wg@grandegger.com>
+Date: Wed Feb 11 18:38:20 2009 +0100
+
+ Enable multi chip support in the NAND layer
+
+ This patch adds support for NAND_MAX_CHIPS to the MTD NAND layer.
+ Multi-chips devices are displayed as shown:
+
+ Device 0: 2x NAND 512MiB 3,3V 8-bit, sector size 128 KiB
+
+ Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
+ Signed-off-by: Scott Wood <scottwood@freescale.com>
+
+commit 74398b23f9c2ffdc137fd92910a46e3333fb93f9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:58:33 2008 -0400
+
+ Blackfin: put memory into self-refresh before/after programming clocks
+
+ When initializing the core clocks, stick external memory into self-refresh.
+ This gains us a few cool things:
+ - support suspend-to-RAM with Linux
+ - reprogram clocks automatically when doing "go" on u-boot.bin in RAM
+ - make sure settings are stable before flashing new version
+ - finally fully unify initialize startup code path between LDR/non-LDR
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit d347d572ab1f2d47bf257c9f7ca2e602038a136b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:56:08 2008 -0400
+
+ Blackfin: do not program voltage regulator on parts that do not have one
+
+ Some newer Blackfins (like the BF51x) do not have an on-chip voltage
+ regulator, so do not attempt to program the memory as if it does.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 0d4f24b70f7a979f58174f3eb271874950b551b6
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Jun 1 01:28:24 2008 -0400
+
+ Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers
+
+ If the board config does not specify an explicit EBIU_SDBCTL value, set it
+ up with sane values based on other configuration options.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 3986e981f565c08f10c7e526af8cb518d741c349
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Dec 6 18:06:58 2008 -0500
+
+ Blackfin: handle reboot anomaly 432
+
+ Workaround anomaly 432:
+ The bfrom_SysControl() firmware function does not clear the SIC_IWR1
+ register before executing the PLL programming sequence. Therefore, any
+ interrupt enabled in the SIC_IWR1 register prior to the call to
+ bfrom_SysControl() can prematurely terminate the idle sequence required
+ for the PLL to relock properly. SIC_IWR0 is properly handled.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 7e1d212b6da492c6ea32c62af92e185284f41291
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 18 04:04:49 2008 -0400
+
+ Blackfin: kill off LDR jump block
+
+ The Boot ROM uses EVT1 as the entry point so set that rather than having
+ to use a tiny jump block in the default EVT1 location.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a75fa148d60b1975403441e45565621bba50d2d9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Jan 6 10:00:48 2009 -0500
+
+ Blackfin: simplify symbol_lookup() a bit
+
+ No need to skip a byte as the symbol table handles this.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 59f0978a7e78d20277ddbde7caf0ea877f3cfd98
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 7 05:43:21 2009 -0500
+
+ Blackfin: fix SIC_RVECT definition: it is 16bits, not 32bits
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 58130f8920151d9e8942bbdf3388f2defb47e415
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 7 05:41:17 2009 -0500
+
+ Blackfin: drop SPORT_TX read helper macros
+
+ The SPORT_TX registers cannot be read (the hardware will trigger an error),
+ so drop the read helper macros.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 820b076c449688bcd4af6db5a33ae424d1a60d0e
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Feb 7 05:25:35 2009 -0500
+
+ Blackfin: unify duplicate CPU port definitions
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 744fd240d181b0b05b1436e1b655c9a62526c752
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Fri Feb 6 00:59:50 2009 -0500
+
+ Blackfin: drop now-unused CONFIG_SYS_BFIN_CMD_XXX
+
+ With the new CONFIG_XXX system and CONFIG_CMD_XXX handling, these defines
+ are no longer used/needed.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 45c48953e8a4038bd49c46813fcff5a207867ae4
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 6 04:01:26 2008 -0400
+
+ Blackfin: print out Flash: before checking it
+
+ If there is some problem in the flash init/checking code, it's nicer to see
+ the message "Flash:" before crashing. This way the source of the problem
+ is a bit more straightforward.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 1c7a79a04eb916f685f7275520b5eea6968a1559
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 15:33:09 2008 -0400
+
+ Blackfin: safely flush data caches when in writeback mode
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c06f2b13022703611bc3e512bd34f9014a46f448
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Aug 7 13:21:48 2008 -0400
+
+ Blackfin: update lockbox api according to latest documentation
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 2decc2a8d17a5397cb5956e46c8466c736e305a2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sat Oct 11 21:49:06 2008 -0400
+
+ Blackfin: mark bfin_reset static
+
+ The function is only used locally, so mark it static.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 974473caa732f63312687ef2bd2d22dad8e99b9a
+Author: Sonic Zhang <Sonic.Zhang@analog.com>
+Date: Fri Mar 20 19:28:20 2009 -0400
+
+ Blackfin: spi: there is no PORTJ_FER MMR on BF537
+
+ Since the PORTJ on the BF537 is peripheral-only (no GPIO functionality),
+ then there is no PORTJ_FER register for us to worry about.
+
+ Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit e82b762f293debc53c5afa90f37264f6b07520f9
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Mar 17 13:58:23 2009 -0400
+
+ Blackfin: fix jtag console tstc
+
+ The jtag tstc operation was checking the hardware to see if data is
+ available from it (which is fine for the jtag getc operation), but the
+ higher layers need to know whether any data is available. Since we have
+ to read up to 4 bytes at a time from the hardware, the higher layers need
+ to know they can consume the cached bytes as well.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit bc683f58b1f1d8d20546fe019483967a51a49df1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 22 16:23:41 2009 -0500
+
+ Blackfin: bf537-stamp: move CONFIG_POST handling to COBJS-$(...)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 8996d1608acb8f59fcb186dc7ed7d87f8fee1297
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Sun Feb 22 16:02:27 2009 -0500
+
+ Blackfin: unify net-related init code
+
+ Unify all of the net-related init code in the common Blackfin board init
+ code to clean up the ifdef mess a bit.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit c6ea30e52ea82af4858d2b6f99e0fd2ea276d657
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 18 12:51:48 2009 -0500
+
+ Blackfin: fix SWRST/SYSCR register sizes
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit a9d6777d39154978b9ef9c682b2627a3480b194c
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 18 12:51:31 2009 -0500
+
+ Blackfin: update anomaly lists
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+
+commit 4d7c32dad2e787f890ebcd51bfb723a126913c90
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Thu Mar 19 18:31:38 2009 +0100
+
+ avr32: fix cacheflush.h location introducted by d8f2aa3298610b
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 3a3baf3ee61e6b28af3b49ebabc9ab4f6015aa48
+Author: Eric Schumann <E.Schumann@phytec.de>
+Date: Sat Mar 21 09:59:34 2009 -0400
+
+ Make flash protection work, when the environment is in EEPROM
+
+ On the pcm030 the environment is located in the onboard EEPROM. But we want
+ to handle flash sector protection in a safe manner. So we must read the
+ unlock environment variable from EEPROM instead from flash.
+
+ This patch is required as long the evironment is saved into the EEPROM.
+
+ Stefan: Additional change as suggested by Wolfgang, use bigger char array
+ (instead of 4).
+
+ Signed-off-by: Eric Schumann <E.Schumann@phytec.de>
+ Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
+ Acked-by: Wolfgang Denk <wd@denx.de>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit de3ce8c59f48f99779d7d7379a5432ded12ec06c
+Author: Jon Smirl <jonsmirl@gmail.com>
+Date: Sat Mar 21 11:17:56 2009 -0400
+
+ Add define for mpc5200 CDM_CLK_ENA
+
+ Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
+
+commit df486b1fa3f750b153eac7daa0b3bf1f594e5098
+Author: Nicolas Ferre <nicolas.ferre@atmel.com>
+Date: Sun Mar 22 14:48:16 2009 +0100
+
+ at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC.
+
+ AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed.
+
+ The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board.
+ It is essentially the same, with a few minor differences.
+
+ Here is the chip page on Atmel website:
+ http://www.atmel.com/dyn/products/product_card.asp?part_id=4337
+
+ Signed-off-by: Justin Waters <justin.waters@timesys.com>
+ Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 118d168035cc93f586da4812c89cb153eb9f4243
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 22 14:28:14 2009 +0100
+
+ cmc_pu2: fix implicit declaration of function 'eth_setenv_enetaddr'
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 176c4a982c6531f96426afaa1126cf9a5e2d5e03
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 22 14:28:13 2009 +0100
+
+ cmc_pu2: fix misc_init_r prototype
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 53158aea995221706b42c7bad9f717b31ae20414
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Jan 11 03:32:01 2009 +0100
+
+ at91sam9xeek: fix soc name
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 74c076d6c33d6d42ab065541a38383587879e7b7
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sun Mar 22 10:22:34 2009 +0100
+
+ at91sam9/at91cap: move nand drivers to drivers/mtd/nand
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 163966087d62680547f188a93c61d01c8155254e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:08:01 2009 +0100
+
+ atmel/at91/boards: compile dataflash partition only when dataflash is
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e2c0476f958f8e0b269a1118f4ba4a5cd475aa56
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:08:00 2009 +0100
+
+ at91sam9/at91cap: move common macb initialisation to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit f3f91f886bc8927fd692ac411b7423a87ffec532
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:08:00 2009 +0100
+
+ at91sam9/at91cap: move common usb host initialisation to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit a484b00b86e72ac6da6ee4fce13dbc6b256672fe
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:08:00 2009 +0100
+
+ at91sam9/at91cap: move common led management to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 7ebafb7ec1a0285af8380623c009576f92583b98
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:07:59 2009 +0100
+
+ at91sam9/at91cap: move common spi initialisation to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit 1332a2a0694c8e10a5bade397cf83645b2c3fd7e
+Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+Date: Sat Mar 21 21:07:59 2009 +0100
+
+ at91sam9/at91cap: move common serial initialisation to cpu
+
+ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+
+commit e60beb13cf0135dc71c541021487b5ccc4d269cb
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sat Mar 21 22:04:41 2009 +0100
+
+ Prepare 2009.03
+
+ Update CHANGELOG
+
+ Signed-off-by: Wolfgang Denk <wd@denx.de>
+
commit 9e78dae2b276c5bf9ab92cd85173f6cb92b1b7d5
Author: Vivek Kutal <vivek.kutal@azingo.com>
Date: Mon Feb 23 21:35:11 2009 +0530
- Replaced endpoint numbers with appropriate macros in usbtty.c.
+ Replaced endpoint numbers with appropriate macros in usbtty.c.
+
+ Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
+ Signed-off-by: Remy Bohmer <linux@bohmer.net>
+
+commit faac4fd852e39cb1d7a740801b060e41aeacef1f
+Author: Michael Lawnick <ml.lawnick@gmx.de>
+Date: Thu Mar 19 10:06:41 2009 +0100
+
+ UBIFS: Missing offset relocation for compressor 'none'
+
+ On systems where U-Boot is linked to another address than it really lays
+ (e.g. backup image), calls via function pointers must be fixed with a
+ '+= gd->reloc_off'.
+ This was not done for none_compr in ubifs_compressors_init() what leads
+ to system crash on ubifsmount command.
+
+ Signed-off-by: Michael Lawnick <ml.lawnick@gmx.de>
+ Acked-by: Stefan Roese <sr@denx.de>
+
+commit ce6d0c8de031f345bde745f3b855082adf1c4e45
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 19 15:35:50 2009 +0100
+
+ UBIFS: Add UBIFS commands
+
+ This patchset adds these UBIFS related commands:
+
+ - ubifsmount
+ Mount an UBIFS volume
+
+ - ubifsls
+ List a directory of the mounted UBIFS volume
+
+ - ubifsload
+ Load a file from the mounted UBIFS volume to memory
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9eefe2a2b37a838558e3d213a9f5519503d0c180
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 19 15:35:05 2009 +0100
+
+ UBIFS: Implement read-only UBIFS support in U-Boot
+
+ The U-Boot UBIFS implementation is largely a direct copy from the current
+ Linux version (2.6.29-rc6). As already done in the UBI version we have an
+ "abstraction layer" to redefine or remove some OS calls (e.g. mutex_lock()
+ ...). This makes it possible to use the original Linux code with very
+ little changes. And by this we can better update to later Linux versions.
+
+ I removed some of the Linux features that are not used in the U-Boot
+ version (e.g. garbage-collection, write support).
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ CC: Artem Bityutskiy <dedekind@infradead.org>
+ CC: Adrian Hunter <ext-Adrian.Hunter@nokia.com>
+
+commit b1b4e89a0f3b75854c39a62cae41bad56d210adf
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 19 15:34:56 2009 +0100
+
+ Add LZO decompressor support
+
+ This patch adds LZO decompression support to U-Boot. It is needed for
+ the upcoming UBIFS support, since UBIFS uses LZO as default compressor/
+ decompressor. Since we only support read-only in UBIFS, only the
+ decompressor is needed.
+
+ All this is copied with minor changes from the current Linux kernel
+ version (2.6.28-rc8).
+
+ This patch only implements this LZO decompressor support for PPC.
+ Other platforms using UBIFS will have to add the required
+ "include/asm/unaligned.h" as well. It should be fairly easy to copy this
+ from the Linux source tree as I have done it for PPC in this patch.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 68d7d65100e84df00bca971c114092731b441090
+Author: Stefan Roese <sr@denx.de>
+Date: Thu Mar 19 13:30:36 2009 +0100
+
+ Separate mtdparts command from jffs2
+
+ Currently the mtdparts commands are included in the jffs2 command support.
+ This doesn't make sense anymore since other commands (e.g. UBI) use this
+ infrastructure as well now. This patch separates the mtdparts commands from
+ the jffs2 commands making it possible to only select mtdparts when no JFFS2
+ support is needed.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+ Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
+
+commit 02a301cd5087eaffdf456e0a5cec1100c4d9a398
+Author: Stefan Roese <sr@denx.de>
+Date: Wed Feb 25 12:11:15 2009 +0100
+
+ powerpc: Only use eth_getenv_enetaddr() if networking is enabled
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 5c4fa9b474af95d60f019ec6369cbe77b9dab4b5
+Author: Grzegorz Bernacki <gjb@semihalf.com>
+Date: Tue Mar 17 10:06:40 2009 +0100
+
+ Add support for the digsy MTC board.
+
+ This is the InterControl custom device based on the MPC5200B chip.
+
+ Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
+
+commit ff7dc067369e30066744f096995aef7d97574d15
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Feb 23 16:52:36 2009 +0100
+
+ powerpc: Fix compilation warning in board.c
+
+ Fix this warning:
+
+ board.c: In function 'board_init_r':
+ board.c:653: warning: unused variable 'i'
+ board.c:651: warning: unused variable 'e'
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 9cd690160d3ce1a7fb4ceeee6c99cedb1ac1d49c
+Author: Stefan Roese <sr@denx.de>
+Date: Mon Feb 23 16:42:51 2009 +0100
+
+ ppc4xx: Don't write the MAC address into the internal SoC registers
+
+ Remove this code. It's not needed. The 4xx EMAC driver stores the MAC
+ addresses into the SoC registers instead.
+
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit bb57ad4be76d0e2e7f9ec56678235cc9872ff40f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:19 2009 +0100
+
+ ppc4xx: Use correct io accessors for esd 405/440 boards
+
+ This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
+ macros. Also volatile pointer references are replaced by the
+ new accessors.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 049216f045fd8e0f45bcef121c2bb1c7d3de6988
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:18 2009 +0100
+
+ ppc4xx: Use correct io accessors for esd 405 boards
+
+ This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32
+ macros. Also volatile pointer references are replaced by the
+ new accessors.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit a59205d1519375d027f97a545ad642ab20fce6f8
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:17 2009 +0100
+
+ ppc4xx: Cleanup linker scripts of esd 4xx boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 2f103ee284e68934a648732db5e0b6ceb4a1ed8f
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:16 2009 +0100
+
+ ppc4xx: Update TEXT_BASE for DASA_SIM boards
+
+ Fix building DASA_SIM boards by increasing U-Boot's size in flash.
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 09db8f4de6805f1dde510c167f20e56a5405d29e
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:15 2009 +0100
+
+ ppc4xx: DU405 maintenance fix
+
+ -strip unused features
+ -fix resetting phy
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit 75511b47ac2647be48218dbb93af05b21f404f67
+Author: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+Date: Fri Feb 20 10:19:14 2009 +0100
+
+ ppc4xx: Abort autoboot only by space key on CPCI405 boards
+
+ Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
+ Signed-off-by: Stefan Roese <sr@denx.de>
+
+commit e17ee157ca9ff0d4cc5841d06c4b70c1603df29c
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:14:56 2009 +1100
+
+ Add basic relocation to i386 port
+
+ Signed-off-by: Graeme Russ <graeme.russ@gmail.com>
+
+commit 8c63d47651f77d9fb887cad433370b866eb0a193
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:14:45 2009 +1100
+
+ Implement SC520 timers
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit 6d7f610b09f813b1239eedcbfe921cfd439aea25
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:14:32 2009 +1100
+
+ Factor out SC520 sub-features
+
+ Moved sub-features of the SC520 code which is currently selectively compiled
+ using #ifdef out of sc520.c into individual files selectively compiled via
+ the makefile
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit abf0cd3dff227cfb6e82ad13be62e28e6e89d5df
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:13:40 2009 +1100
+
+ Rewrite i386 interrupt handling
+
+ Rewrite interrupt handling functionality for the i386 port. Separated
+ functionality into separate CPU and Architecture components.
+
+ It appears as if the i386 interrupt handler functionality was intended
+ to allow multiple handlers to be installed for a given interrupt.
+ Unfortunately, this functionality was not fully implemented and also
+ had the problem that irq_free_handler() does not allow the passing
+ of the handler function pointer and therefore could never be used to
+ free specific handlers that had been installed for a given IRQ.
+
+ There were also various issues with array bounds not being fully
+ tested.
+
+ I had two objectives in mind for the new implementation:
+
+ 1) Keep the implementation as similar as possible to existing
+ implementations. To that end, I have used the leon2/3
+ implementations as the reference
+
+ 2) Seperate CPU and Architecture specific elements. All specific i386
+ interrupt functionality is now in cpu/i386/ with the high level
+ API and architecture specific code in lib_i386. Functionality
+ specific to the PC/AT architecture (i.e. cascaded i8259 PICs) has
+ been further split out into an individual file to allow for the
+ implementation of the PIC architecture of the SC520 CPU (supports
+ more IRQs)
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit ece444b42b71eb5bce34a24ec584573b3c8c4a98
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:12:35 2009 +1100
+
+ Move ali512x.h
+
+ Moved ali512x.h from include/asm-i386/ic/ to /include
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit 6d83e3ac61dcdbcb7f04664309a9689fe01c5704
+Author: Graeme Russ <graeme.russ@gmail.com>
+Date: Tue Feb 24 21:12:20 2009 +1100
+
+ Rename SC520 Configuration Options
+
+ Options are now all uniformly CONFIG_SYS_SC520_<option>
+
+ Signed-off-by: Graeme Russ <graeme.russ at gmail.com>
+
+commit f62fb99941c625605aa16a0097b396a5c16d2c88
+Author: Trent Piepho <xyzzy@speakeasy.org>
+Date: Wed Feb 18 15:22:05 2009 -0800
+
+ Fix all linker script to handle all rodata sections
+
+ A recent gcc added a new unaligned rodata section called '.rodata.str1.1',
+ which needs to be added the the linker script. Instead of just adding this
+ one section, we use a wildcard ".rodata*" to get all rodata linker section
+ gcc has now and might add in the future.
+
+ However, '*(.rodata*)' by itself will result in sub-optimal section
+ ordering. The sections will be sorted by object file, which causes extra
+ padding between the unaligned rodata.str.1.1 of one object file and the
+ aligned rodata of the next object file. This is easy to fix by using the
+ SORT_BY_ALIGNMENT command.
+
+ This patch has not be tested one most of the boards modified. Some boards
+ have a linker script that looks something like this:
+
+ *(.text)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata.str1.4)
+ *(.eh_frame)
+
+ I change this to:
+
+ *(.text)
+ . = ALIGN(16);
+ *(.eh_frame)
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+
+ This means the start of rodata will no longer be 16 bytes aligned.
+ However, the boundary between text and rodata/eh_frame is still aligned to
+ 16 bytes, which is what I think the real purpose of the ALIGN call is.
+
+ Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
+
+commit 566b652c7cdb0e5e0529bb3d1eaffbd2bf45a032
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:26:08 2009 -0500
+
+ remove bi_enet*addr from global data for all arches
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Daniel Hellstrom <daniel@gaisler.com>
+ CC: Michal Simek <monstr@seznam.cz>
+ CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ CC: Scott McNutt <smcnutt@psyent.com>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+
+commit eb85aa594c1b57a1e3be9689b65171a137a36432
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 20:07:19 2009 -0500
+
+ ppc: mark global bi_enet*addr as legacy
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ In the ppc case, these things are part of the legacy ABI, so keep them
+ around but mark them as legacy so no new code will touch them.
+
+ Also stop calling load_sernum_ethaddr() since all boards now implement
+ this as a stub.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 9c150102bc1de375d36d97a1cc2dd0e9639b15df
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 20:09:52 2009 -0500
+
+ boards: get mac address from env and move load_sernum_ethaddr() to board init
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Rather than have common ppc code call a board-specific function like
+ load_sernum_ethaddr(), have each board call it in its own board-specific
+ misc_init_r() function.
+
+ The boards that get converted here are:
+ - kup4k/kup4x
+ - pcs440ep
+ - tqm8xx
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Stefan Roese <sr@denx.de>
+
+commit 92b50ffef978f05858a0ff4cbe88430bc51a28a2
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:55:01 2009 -0500
+
+ cmc_pu2: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Also rename load_sernum_ethaddr() to misc_init_r() so we don't need to
+ handle this board specially in common ARM code.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit d8d21e699d7fcfb6ab11635110266dd09b7edc62
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 16 18:03:14 2009 -0500
+
+ boards: move board_get_enetaddr() into board-specific init
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Rather than have the common ppc code have board-specific hooks, move the
+ board_get_enetaddr() function into the board-specific init functions.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit f11e6ff5b1859d9213f0d501b3309e065f487543
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:39:55 2009 -0500
+
+ arm: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Some warts are remaining and should be killed off (by moving the func to
+ the appropriate board init code):
+ - davinci_eth_set_mac_addr
+ - cs8900_get_enetaddr
+ - smc_set_mac_addr
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0107cf66f7346e8c7d6cf0fe99d2f265134afd59
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:36:20 2009 -0500
+
+ nx823: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ For the nx823, the serial number is moved out of load_sernum_ethaddr() and
+ into misc_init_r() as is the env setup. This lets us kill off the former
+ function in the process.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 19b5b533ccd522abeb501d510750693c35e20456
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:27:18 2009 -0500
+
+ lib_*/board.c: do not initialize bi_enet*addr in global data
+
+ Since everyone is using the environment for mac address storage, there is
+ no point in seeding the global data.
+
+ The arches that are converted here:
+ i386
+ m68k
+ microblaze
+ mips
+ nios
+ nios2
+ sh
+ sparc
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Daniel Hellstrom <daniel@gaisler.com>
+ CC: Michal Simek <monstr@seznam.cz>
+ CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ CC: Scott McNutt <smcnutt@psyent.com>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- Signed-off-by: Vivek Kutal <vivek.kutal@azingo.com>
- Signed-off-by: Remy Bohmer <linux@bohmer.net>
+commit 740e8ba7d475c49c1b76058e1bf354e376b5c4e0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:19:54 2009 -0500
+
+ npe: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The resulting code can also be simplified even further.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Stefan Roese <sr@denx.de>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6bacfa6a8e9b264d37c1262fc1f3e948d1feab81
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:18:41 2009 -0500
+
+ cpu/: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The cpus that get converted here:
+ at91rm9200
+ mpc512x
+ mpc5xxx
+ mpc8260
+ mpc8xx
+ ppc4xx
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: John Rigby <jrigby@freescale.com>
+ CC: Stefan Roese <sr@denx.de>
+
+commit 03f3d8d3b39cf85c0ce7ca903b436701e8aa610b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:09:54 2009 -0500
+
+ lan91c96/smc91111/smc911x: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Also, do not bother checking the EEPROM if the env is setup. This
+ simplifies the code greatly.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ Signed-off-by: Wolfgang Dnek <wd@denx.de>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Rolf Offermanns <rof@sysgo.de>
+ CC: Erik Stahlman <erik@vt.edu>
+ CC: Daris A Nevil <dnevil@snmc.com>
+ CC: Sascha Hauer <s.hauer@pengutronix.de>
+
+commit c527ce92511cbf723c2ca77bee1cf9ecf83dac81
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:14:09 2009 -0500
+
+ sh_eth: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The sh_eth driver can also be simplified a bit by using enetaddr member of
+ the eth_device structure.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ CC: Carlos Munoz <carlos@kenati.com>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 0a5238cea90665c230297a8fd77bb0b3b61ca177
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:06:09 2009 -0500
+
+ cs8900: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The cs8900 driver also changes slightly in that the hardware is not
+ consulted if the mac address in the env is sane.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Marius Groeger <mgroeger@sysgo.de>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit c4b8762f11d337e6a9d90c227b2871d65d372469
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:04:25 2009 -0500
+
+ bcm570x: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ Since the address is in the PLM_DEVICE_BLOCK structure already, there is
+ no need to pass the NodeAddress as a second parameter. So drop the second
+ argument to the LM_SetMacAddress() function (and update the tigon3 driver
+ accordingly).
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit d3f871482f06f6a4eaf4a3fafde84846bad87b4f
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 19:01:26 2009 -0500
+
+ drivers/net/: get mac address from environment
+
+ The environment is the canonical storage location of the mac address, so
+ we're killing off the global data location and moving everything to
+ querying the env directly.
+
+ The drivers that get converted here:
+ 3c589
+ 4xx_enet
+ dc2114x
+ dm9000x
+ enc28j60
+ fsl_mcdmafec
+ ks8695eth
+ mcffec
+ rtl8019
+ rtl8169
+ s3c4510b_eth
+ xilinx_emac
+ xilinx_emaclite
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Rolf Offermanns <rof@sysgo.de>
+ CC: Stefan Roese <sr@denx.de>
+ CC: Sascha Hauer <saschahauer@web.de>
+ CC: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
+ CC: Greg Ungerer <greg.ungerer@opengear.com>
+ CC: Xue Ligong <lgxue@hotmail.com>
+ CC: Masami Komiya <mkomiya@sonare.it>
+ CC: Curt Brune <curt@cucy.com>
+ CC: Michal SIMEK <monstr@monstr.eu>
+
+commit b6b4625d175019e387e5b0f65a17322a78f6bb90
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:38:38 2009 -0500
+
+ boards: get mac address from environment
+
+ The boards that get converted here to use the environment for the mac
+ address rather than global data:
+ debris
+ mgcoge
+ mgsuvd
+ muas3001
+ netstal
+ pn62
+ sixnet
+ vcma9
+ xilinx (the ones that use xilinx_enet)
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+ CC: Sangmoon Kim <dogoil@etinsys.com>
+ CC: Heiko Schocher <hs@denx.de>
+ CC: David Mueller <d.mueller@elsoft.ch>
+ CC: Niklaus Giger <niklaus.giger@netstal.com>
+ CC: Wolfgang Grandegger <wg@denx.de>
+ CC: Dave Ellis <DGE@sixnetio.com>
+ CC: Ricardo Ribalda <ricardo.ribalda@uam.es>
+
+commit 06a0c4381a65ed500c816a05b9ae7b207c3b1d4b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:36:45 2009 -0500
+
+ AmigaOneG3SE/enet: get mac address from environment
+
+ Always use the MAC address that is stored in the environment first before
+ falling back to the ROM. This also cuts out any comparison steps: if the
+ mac in the env is sane, the ROM is never consulted.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Thomas Frieden <ThomasF@hyperion-entertainment.com>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 56b555a644f3cbb1b3929cb52b61d3ce483885f5
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:52:38 2009 -0500
+
+ nvedit: do not update global bi_enetaddr and do not call eth_set_enetaddr()
+
+ Since the ethernet layer handles updating of device addresses itself from
+ the environment, there is no point in calling eth_set_enetaddr().
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 5013533467c1de731c2f0c9beb4b41ce3f07cbeb
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:54:07 2009 -0500
+
+ lynxkdi: get mac address from environment
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 62c93d92f1b6266b2f33c5f403931b51cbd2a246
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:51:43 2009 -0500
+
+ bootvx: get mac address from environment
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Niklaus Giger <niklaus.giger@member.fsf.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit de2dff6ff89f98c6062f4d224fd434a3ede035d1
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:50:10 2009 -0500
+
+ bdinfo: get mac address from environment
+
+ Add a new print_eth() function to automate the eth*addr env var acquisition
+ and display. Affects all arches.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ CC: Scott McNutt <smcnutt@psyent.com>
+ CC: Shinya Kuribayashi <skuribay@ruby.dti.ne.jp>
+ CC: Michal Simek <monstr@seznam.cz>
+ CC: Daniel Hellstrom <daniel@gaisler.com>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 95823ca0773356860e622ee3304a4b7cafcbf19a
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 18:23:48 2009 -0500
+
+ net: get mac address from environment and use eth util funcs
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 500b6c51e4c41f4562cb48344af98deb7e342731
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Oct 13 15:06:25 2008 -0400
+
+ Blackfin: bfin_mac: force boards to setup the MAC themselves
+
+ Since the on-chip MAC does not have an eeprom or similar interface, force
+ all Blackfin boards that use this driver to setup the board data with a
+ proper MAC.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6ff4137f2ad640e4fc8ea1b0455161ddff1f6730
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Wed Feb 11 14:12:34 2009 -0500
+
+ doc/README.enetaddr: document proper MAC usage
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 3f6e6993e92fd0658da1746d1c84644612ee520b
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Thu Jan 29 19:43:44 2009 -0500
+
+ net: new utility functions for working with enetaddr's
+
+ Declare new utility functions for converting between the environment
+ variables (eth*addr) and the binary MAC address representation. This way
+ we can unify all the random places that already do this kind of thing.
+
+ The functions in question:
+ eth_parse_enetaddr - "..." -> {...}
+ eth_getenv_enetaddr - env -> {...}
+ eth_setenv_enetaddr - {...} -> env
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit b6446b67758ea1e41223f0782924bb73fd0a89d0
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Tue Feb 17 00:00:53 2009 -0500
+
+ convert print_IPaddr() to %pI4
+
+ Now that our printf functions support the %pI4 modifier like the kernel,
+ let's drop the inflexible print_IPaddr() function and covert over to the
+ %pI4 modifier.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
+ CC: Ben Warren <biggerbadderben@gmail.com>
+
+commit 6c6166f52983dac775e3852f9d0f49d033f27108
+Author: Mike Frysinger <vapier@gentoo.org>
+Date: Mon Feb 16 23:21:36 2009 -0500
+
+ vsprintf: pull updates from Linux kernel
+
+ This brings in support for the %p modifier which allows us to easily print
+ out things like ip addresses, mac addresses, and pointers.
+
+ It also converts the rarely used 'q' length modifier to the common 'L'
+ modifier when dealing with quad types.
+
+ While this new code is a bit larger (~1k .text), most of it should be made
+ up by converting the existing ip/mac address code to use format modifiers.
+
+ Signed-off-by: Mike Frysinger <vapier@gentoo.org>
commit a43ea5cc6d612471fbc74f0a26b2bea5864aa1d6
Author: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
+commit 58a518c3d8a2c7de11d414e8b903495daee7dc7e
+Author: Mark Jackson <mpfj-list@mimc.co.uk>
+Date: Fri Feb 13 15:48:18 2009 +0000
+
+ Setup extra MIMC200 chip selects
+
+ Added code to setup the extra Flash and FRAM chip selects as used on the
+ MIMC200 board.
+
+ V2 moves the init code from the common "cpu.c" file into the board specific
+ setup file.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 80534886a72a0088eef9e781a8e0b7d04ea41f36
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Mon Nov 24 12:10:56 2008 +0000
+
+ MIMC200: tidy GCLK init code
+
+ Change the MIMC200 startup code to use the built-in (rather than
+ hard-coded) funtions for setting up gclk outputs.
+
+ We'll also move the code to the new, more-appropriate
+ board_postclk_init() routine.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit b423f94063bf04e92047ff85c7e53441eb3b712b
+Author: Olav Morken <olavmrk@gmail.com>
+Date: Fri Jan 23 12:56:32 2009 +0100
+
+ AVR32: Must add NOPs after disabling interrupts for AT32UC3A0512ES
+
+ The AT32UC3A0512ES chip has a bug when disabling interrupts. As a
+ workaround, two NOPs can be inserted.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit f5f652fa91aa69db8117d211af1b4fe09f2edd3b
+Author: Gunnar Rangoy <gunnar@rangoy.com>
+Date: Fri Jan 23 12:56:29 2009 +0100
+
+ AVR32: Make GPIO implmentation cpu dependent
+
+ There are some differences in the implementation of GPIO in the
+ at32uc chip compared to the ap700x series.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit a38de083d2979db3680f0d0978c509a172c8fa00
+Author: Olav Morken <olavmrk@gmail.com>
+Date: Fri Jan 23 12:56:28 2009 +0100
+
+ AVR32: Move addrspace.h to arch-directory, and move some functions from io.h to addrspace.h
+
+ The AVR32A architecture (which AT32UC3A-series is based on) has a
+ different memory layout than the AVR32B-architecture. This patch moves
+ addrspace.h to an arch-dependent directory in preparation for
+ AT32UC3A-support. It also moves some address-space manipulation
+ functions from io.h to addrspace.h.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit d8f2aa3298610b44127dbc4796d8038aa5847e0b
+Author: Olav Morken <olavmrk@gmail.com>
+Date: Fri Jan 23 12:56:27 2009 +0100
+
+ AVR32: Make cacheflush cpu-dependent
+
+ The AT32UC3A series of processors doesn't contain any cache, and issuing
+ cache control instructions on those will cause an exception. This commit
+ makes cacheflush.h arch-dependent in preparation for the AT32UC3A-support.
+
+ Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
+ Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
+ Signed-off-by: Olav Morken <olavmrk@gmail.com>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
commit 2f70c49e5b9813635ad73666aa30f304c7fdeda9
Author: Heiko Schocher <hs@denx.de>
Date: Tue Feb 10 09:38:52 2009 +0100
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
+commit a69a42338dd25408f9fd5390a83bc501749c7e1b
+Author: Mark Jackson <mpfj@mimc.co.uk>
+Date: Fri Oct 3 11:48:57 2008 +0100
+
+ MIMC200 board now uses CONFIG_DISABLE_CONSOLE
+
+ Changed MIMC200 board setup and config to use CONFIG_DISABLE_CONSOLE.
+ Also fixed default uImage location.
+
+ Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
commit cd3cb0d9269d155276b00207e3816a9347fd1c92
Author: Gerald Van Baren <vanbaren@cideas.com>
Date: Sat Oct 4 07:56:06 2008 -0400
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
+commit baf449fc5ff96f071bb0e3789fd3265f6d4fd9a0
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Mon Sep 1 14:00:07 2008 +0200
+
+ avr32: Add support for "GPIO" port mux
+
+ The "GPIO" port mux is used on AVR32 UC3 parts as well as AT32AP7200 and
+ all later AVR32 chips. This patch adds a driver for it, implementing the
+ same API as the existing portmux-pio driver but with more functionality.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit d92852579546c46bdaac978e0b6767a6645b69e0
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Aug 15 15:02:29 2008 +0200
+
+ atstk1000: Convert to new-style makefile
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 25e6854d42c11046a468576179b5494f850311b2
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sun Aug 31 18:46:35 2008 +0200
+
+ avr32: use board_early_init_r instead of board_init_info
+
+ Replace the avr32-specific board_init_info hook by the standard
+ board_early_init_r hook and make it optional.
+
+ board_early_init_r() runs somewhat earlier than board_init_info used to
+ do, but this isn't a problem for any of the in-tree boards.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 36d375faf5cff98e8dca32aabbbb1ec6036437dd
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sun Aug 31 18:24:24 2008 +0200
+
+ avr32: Use board_postclk_init instead of gclk_init
+
+ Replace the avr32-specific gclk_init() board hook with the standard
+ board_postclk_init() hook which is supposed to run at the same point
+ during initialization.
+
+ Provide a dummy weak alias for boards not implementing this hook. The
+ cost of this is:
+ - 2 bytes for the dummy function (retal 0)
+ - 2 bytes for each unnecessary function call (short rcall)
+
+ which is a pretty small price to pay for avoiding lots of #ifdef
+ clutter. In this particular case, all boards probably end up slightly
+ smaller because we avoid the conditional checking if the gclk_init
+ symbol is NULL.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit abdde2b1d570b1ee77606bf783444fcddf7f0965
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sun Aug 31 18:07:35 2008 +0200
+
+ hammerhead: Use gclk helper functions
+
+ Use the new gclk helper functions to set up the PHY clock instead of
+ accessing the PM registers directly.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 98090cd75cdb40b2ab94c806c338540a5716748b
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sun Aug 31 18:05:32 2008 +0200
+
+ avr32: Add gclk helper functions
+
+ Add two helper functions for configuring and enabling generic clocks:
+ - gclk_enable_output: Enables output on a GCLKx pin
+ - gclk_set_rate: Configures a gclk to run at a specific rate
+
+ This should eliminate any reason to go mucking about with PM registers
+ from board code.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit ab0df36fc7db9dda0b786b909f653e279dfeb9cf
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Aug 29 21:09:49 2008 +0200
+
+ avr32: refactor the portmux/gpio code
+
+ - Separate the portmux configuration functionality from the GPIO pin
+ control API.
+ - Separate the controller-specific code from the chip-specific code.
+ - Allow "ganged" port configuration (multiple pins at once).
+ - Add more flexibility to the "canned" peripheral select functions:
+ - Allow using more than 23 address bits, more chip selects, as
+ well as NAND- and CF-specific pins.
+ - Make the MACB SPEED pin optional, and choose between MII/RMII
+ using a parameter instead of an #ifdef.
+ - Make it possible to use other MMC slots than slot 0, and support
+ different MMC/SDCard data bus widths.
+ - Use more reasonable pull-up defaults; floating pins may consume a
+ lot of power.
+ - Get rid of some custom portmux code from the mimc200 board code. The
+ old gpio/portmux API couldn't really handle its requirements, but
+ the new one can.
+ - Add documentation.
+
+ The end result is slightly smaller code for all boards. Which isn't
+ really the point, but at least it isn't any larger.
+
+ This has been verified on ATSTK1002 and ATNGW100. I'd appreciate if
+ the board maintainers could help me test this on their boards. In
+ particular, the mimc200 port has lost a lot of code, so I'm hoping Mark
+ can help me out.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+ Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+ Cc: Mark Jackson <mpfj@mimc.co.uk>
+ Cc: Alex Raimondi <alex.raimondi@miromico.ch>
+ Cc: Julien May <julien.may@miromico.ch>
+
+ Changes since v1:
+ * Enable pullup on NWAIT
+ * Add missing include to portmux-pio.h
+ * Rename CONFIG_PIO2 -> CONFIG_PORTMUX_PIO to match docs
+
+commit 4c24e8288c601cb773ab02528b48a8577970e867
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Sat Aug 30 17:28:36 2008 +0200
+
+ avr32: data_bits should reflect the actual number of data bits
+
+ Make the data_bits enum in struct sdram_config reflect the actual number
+ of data bits on the bus, i.e. 16 or 32. Having 0 mean 16 bits and 1 mean
+ 32 bits is just too confusing.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
+commit 66b7bc5175325809718d8d49ef073bc1036ad71b
+Author: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+Date: Fri Aug 29 17:48:18 2008 +0200
+
+ avr32: Update README
+
+ Remove some outdated and/or unnecessary information, and add updated
+ information about the toolchain and buildroot.
+
+ Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
+
commit c75e772a2f061a508bba28ded1b5bea91f0442b0
Author: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Date: Sun Aug 31 23:28:15 2008 +0900
projects / karo-tx-uboot.git / blobdiff