See also Documentation/power/runtime_pm.txt, pci=noacpi
- acpi_rsdp= [ACPI,EFI,KEXEC]
- Pass the RSDP address to the kernel, mostly used
- on machines running EFI runtime service to boot the
- second kernel for kdump.
-
acpi_apic_instance= [ACPI, IOAPIC]
Format: <int>
2: use 2nd APIC table, if available
(e.g. thinkpad_acpi, sony_acpi, etc.) instead
of the ACPI video.ko driver.
+ acpica_no_return_repair [HW, ACPI]
+ Disable AML predefined validation mechanism
+ This mechanism can repair the evaluation result to make
+ the return objects more ACPI specification compliant.
+ This option is useful for developers to identify the
+ root cause of an AML interpreter issue when the issue
+ has something to do with the repair mechanism.
+
acpi.debug_layer= [HW,ACPI,ACPI_DEBUG]
acpi.debug_level= [HW,ACPI,ACPI_DEBUG]
Format: <int>
unusable. The "log_buf_len" parameter may be useful
if you need to capture more output.
+ acpi_enforce_resources= [ACPI]
+ { strict | lax | no }
+ Check for resource conflicts between native drivers
+ and ACPI OperationRegions (SystemIO and SystemMemory
+ only). IO ports and memory declared in ACPI might be
+ used by the ACPI subsystem in arbitrary AML code and
+ can interfere with legacy drivers.
+ strict (default): access to resources claimed by ACPI
+ is denied; legacy drivers trying to access reserved
+ resources will fail to bind to device using them.
+ lax: access to resources claimed by ACPI is allowed;
+ legacy drivers trying to access reserved resources
+ will bind successfully but a warning message is logged.
+ no: ACPI OperationRegions are not marked as reserved,
+ no further checks are performed.
+
acpi_force_table_verification [HW,ACPI]
Enable table checksum verification during early stage.
By default, this is disabled due to x86 early mapping
This feature is enabled by default.
This option allows to turn off the feature.
+ acpi_no_memhotplug [ACPI] Disable memory hotplug. Useful for kdump
+ kernels.
+
acpi_no_static_ssdt [HW,ACPI]
Disable installation of static SSDTs at early boot time
By default, SSDTs contained in the RSDT/XSDT will be
dynamic table installation which will install SSDT
tables to /sys/firmware/acpi/tables/dynamic.
- acpica_no_return_repair [HW, ACPI]
- Disable AML predefined validation mechanism
- This mechanism can repair the evaluation result to make
- the return objects more ACPI specification compliant.
- This option is useful for developers to identify the
- root cause of an AML interpreter issue when the issue
- has something to do with the repair mechanism.
+ acpi_rsdp= [ACPI,EFI,KEXEC]
+ Pass the RSDP address to the kernel, mostly used
+ on machines running EFI runtime service to boot the
+ second kernel for kdump.
acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
Format: To spoof as Windows 98: ="Microsoft Windows"
+ acpi_rev_override [ACPI] Override the _REV object to return 5 (instead
+ of 2 which is mandated by ACPI 6) as the supported ACPI
+ specification revision (when using this switch, it may
+ be necessary to carry out a cold reboot _twice_ in a
+ row to make it take effect on the platform firmware).
+
acpi_osi= [HW,ACPI] Modify list of supported OS interface strings
acpi_osi="string1" # add string1
acpi_osi="!string2" # remove string2
Use timer override. For some broken Nvidia NF5 boards
that require a timer override, but don't have HPET
- acpi_enforce_resources= [ACPI]
- { strict | lax | no }
- Check for resource conflicts between native drivers
- and ACPI OperationRegions (SystemIO and SystemMemory
- only). IO ports and memory declared in ACPI might be
- used by the ACPI subsystem in arbitrary AML code and
- can interfere with legacy drivers.
- strict (default): access to resources claimed by ACPI
- is denied; legacy drivers trying to access reserved
- resources will fail to bind to device using them.
- lax: access to resources claimed by ACPI is allowed;
- legacy drivers trying to access reserved resources
- will bind successfully but a warning message is logged.
- no: ACPI OperationRegions are not marked as reserved,
- no further checks are performed.
-
- acpi_no_memhotplug [ACPI] Disable memory hotplug. Useful for kdump
- kernels.
-
add_efi_memmap [EFI; X86] Include EFI memory map in
kernel's map of available physical RAM.
cpuidle.off=1 [CPU_IDLE]
disable the cpuidle sub-system
+ cpu_init_udelay=N
+ [X86] Delay for N microsec between assert and de-assert
+ of APIC INIT to start processors. This delay occurs
+ on every CPU online, such as boot, and resume from suspend.
+ Default: 10000
+
cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver
Format:
<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
Enable debug messages at boot time. See
Documentation/dynamic-debug-howto.txt for details.
+ nompx [X86] Disables Intel Memory Protection Extensions.
+ See Documentation/x86/intel_mpx.txt for more
+ information about the feature.
+
eagerfpu= [X86]
on enable eager fpu restore
off disable eager fpu restore
auto selects the default scheme, which automatically
enables eagerfpu restore for xsaveopt.
+ module.async_probe [KNL]
+ Enable asynchronous probe on this module.
+
early_ioremap_debug [KNL]
Enable debug messages in early_ioremap support. This
is useful for tracking down temporary early mappings
earlyprintk=serial[,0x...[,baudrate]]
earlyprintk=ttySn[,baudrate]
earlyprintk=dbgp[debugController#]
+ earlyprintk=pciserial,bus:device.function[,baudrate]
earlyprintk is useful when the kernel crashes before
the normal console is initialized. It is not enabled by
The list of supported hash algorithms is defined
in crypto/hash_info.h.
- ima_tcb [IMA]
+ ima_policy= [IMA]
+ The builtin measurement policy to load during IMA
+ setup. Specyfing "tcb" as the value, measures all
+ programs exec'd, files mmap'd for exec, and all files
+ opened with the read mode bit set by either the
+ effective uid (euid=0) or uid=0.
+ Format: "tcb"
+
+ ima_tcb [IMA] Deprecated. Use ima_policy= instead.
Load a policy which meets the needs of the Trusted
Computing Base. This means IMA will measure all
programs exec'd, files mmap'd for exec, and all files
ima_template= [IMA]
Select one of defined IMA measurements template formats.
- Formats: { "ima" | "ima-ng" }
+ Formats: { "ima" | "ima-ng" | "ima-sig" }
Default: "ima-ng"
ima_template_fmt=
* [no]ncq: Turn on or off NCQ.
+ * [no]ncqtrim: Turn off queued DSM TRIM.
+
* nohrst, nosrst, norst: suppress hard, soft
and both resets.
nomca [IA-64] Disable machine check abort handling
- nomce [X86-32] Machine Check Exception
+ nomce [X86-32] Disable Machine Check Exception
nomfgpt [X86-32] Disable Multi-Function General Purpose
Timer usage (for AMD Geode machines).
Set maximum number of finished RCU callbacks to
process in one batch.
+ rcutree.dump_tree= [KNL]
+ Dump the structure of the rcu_node combining tree
+ out at early boot. This is used for diagnostic
+ purposes, to verify correct tree setup.
+
+ rcutree.gp_cleanup_delay= [KNL]
+ Set the number of jiffies to delay each step of
+ RCU grace-period cleanup. This only has effect
+ when CONFIG_RCU_TORTURE_TEST_SLOW_CLEANUP is set.
+
rcutree.gp_init_delay= [KNL]
Set the number of jiffies to delay each step of
RCU grace-period initialization. This only has
- effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT is
- set.
+ effect when CONFIG_RCU_TORTURE_TEST_SLOW_INIT
+ is set.
+
+ rcutree.gp_preinit_delay= [KNL]
+ Set the number of jiffies to delay each step of
+ RCU grace-period pre-initialization, that is,
+ the propagation of recent CPU-hotplug changes up
+ the rcu_node combining tree. This only has effect
+ when CONFIG_RCU_TORTURE_TEST_SLOW_PREINIT is set.
+
+ rcutree.rcu_fanout_exact= [KNL]
+ Disable autobalancing of the rcu_node combining
+ tree. This is used by rcutorture, and might
+ possibly be useful for architectures having high
+ cache-to-cache transfer latencies.
rcutree.rcu_fanout_leaf= [KNL]
Increase the number of CPUs assigned to each
test, hence the "fake".
rcutorture.nreaders= [KNL]
- Set number of RCU readers.
+ Set number of RCU readers. The value -1 selects
+ N-1, where N is the number of CPUs. A value
+ "n" less than -1 selects N-n-2, where N is again
+ the number of CPUs. For example, -2 selects N
+ (the number of CPUs), -3 selects N+1, and so on.
rcutorture.object_debug= [KNL]
Enable debug-object double-call_rcu() testing.
projects / karo-tx-linux.git / blobdiff