#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
ifeq ($(ARCH),mips)
CROSS_COMPILE = mips_4KC-
endif
+ifeq ($(ARCH),nios)
+CROSS_COMPILE = nios-elf-
+endif
+ifeq ($(ARCH),m68k)
+CROSS_COMPILE = m68k-elf-
+endif
endif
endif
export CROSS_COMPILE
-# The "tools" are needed early, so put this first
-SUBDIRS = tools \
- examples \
- lib_generic \
- lib_$(ARCH) \
- cpu/$(CPU) \
- board/$(BOARDDIR) \
- common \
- disk \
- fs \
- net \
- rtc \
- dtt \
- drivers \
- drivers/sk98lin \
- post \
- post/cpu
-
#########################################################################
# U-Boot objects....order is important (i.e. start must be first)
-OBJS = cpu/$(CPU)/start.o
+OBJS = cpu/$(CPU)/start.o
ifeq ($(CPU),i386)
-OBJS += cpu/$(CPU)/start16.o
-OBJS += cpu/$(CPU)/reset.o
+OBJS += cpu/$(CPU)/start16.o
+OBJS += cpu/$(CPU)/reset.o
endif
ifeq ($(CPU),ppc4xx)
-OBJS += cpu/$(CPU)/resetvec.o
+OBJS += cpu/$(CPU)/resetvec.o
+endif
+ifeq ($(CPU),mpc85xx)
+OBJS += cpu/$(CPU)/resetvec.o
endif
-LIBS = board/$(BOARDDIR)/lib$(BOARD).a
+LIBS = lib_generic/libgeneric.a
+LIBS += board/$(BOARDDIR)/lib$(BOARD).a
LIBS += cpu/$(CPU)/lib$(CPU).a
LIBS += lib_$(ARCH)/lib$(ARCH).a
-LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a fs/fat/libfat.a
+LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a
LIBS += net/libnet.a
LIBS += disk/libdisk.a
LIBS += rtc/librtc.a
LIBS += drivers/sk98lin/libsk98lin.a
LIBS += post/libpost.a post/cpu/libcpu.a
LIBS += common/libcommon.a
-LIBS += lib_generic/libgeneric.a
+.PHONY : $(LIBS)
+
# Add GCC lib
PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
+# The "tools" are needed early, so put this first
+# Don't include stuff already done in $(LIBS)
+SUBDIRS = tools \
+ examples \
+ post \
+ post/cpu
+.PHONY : $(SUBDIRS)
+
#########################################################################
#########################################################################
u-boot.dis: u-boot
$(OBJDUMP) -d $< > $@
-u-boot: depend subdirs $(OBJS) $(LIBS) $(LDSCRIPT)
+u-boot: depend $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
--start-group $(LIBS) $(PLATFORM_LIBS) --end-group \
-Map u-boot.map -o u-boot
-subdirs:
- @for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir || exit 1 ; done
+$(LIBS):
+ $(MAKE) -C `dirname $@`
+
+$(SUBDIRS):
+ $(MAKE) -C $@ all
gdbtools:
$(MAKE) -C tools/gdb || exit 1
cmi_mpc5xx_config: unconfig
@./mkconfig $(@:_config=) ppc mpc5xx cmi
+PATI_config:unconfig
+ @./mkconfig $(@:_config=) ppc mpc5xx pati mpl
+
#########################################################################
## MPC5xxx Systems
#########################################################################
-IceCube_5200_config \
+MPC5200LITE_config \
+MPC5200LITE_LOWBOOT_config \
+MPC5200LITE_LOWBOOT08_config \
+icecube_5200_DDR_LOWBOOT_config \
+icecube_5200_DDR_config \
+IceCube_5200_DDR_config \
+icecube_5200_config \
+IceCube_5200_config \
IceCube_5100_config: unconfig
@ >include/config.h
- @[ -z "$(findstring _5200,$@)" ] || \
+ @[ -z "$(findstring LOWBOOT,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF000000" >board/icecube/config.tmp ; \
+ echo "... with LOWBOOT configuration" ; \
+ }
+ @[ -z "$(findstring LOWBOOT08,$@)" ] || \
+ { echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
+ echo "... with 8 MB flash only" ; \
+ }
+ @[ -z "$(findstring DDR,$@)" ] || \
+ { echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
+ echo "... DDR memory revision" ; \
+ }
+ @[ -z "$(findstring 5200,$@)" ] || \
{ echo "#define CONFIG_MPC5200" >>include/config.h ; \
echo "... with MPC5200 processor" ; \
}
- @[ -z "$(findstring _5100,$@)" ] || \
+ @[ -z "$(findstring 5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>include/config.h ; \
echo "... with MGT5100 processor" ; \
}
@./mkconfig -a IceCube ppc mpc5xxx icecube
+MINI5200_config \
+EVAL5200_config \
+TOP5200_config: unconfig
+ @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
+ @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
+
#########################################################################
## MPC8xx Systems
#########################################################################
AdderII_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx adderII
-ADS860_config: unconfig
+ADS860_config \
+DUET_ADS_config \
+FADS823_config \
+FADS850SAR_config \
+MPC86xADS_config \
+FADS860T_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx fads
AMX860_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx amx860 westel
+bms2003_config : unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx tqm8xx
+
c2mon_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx c2mon
ETX094_config : unconfig
@./mkconfig $(@:_config=) ppc mpc8xx etx094
-FADS823_config \
-FADS850SAR_config \
-MPC86xADS_config \
-FADS860T_config: unconfig
- @./mkconfig $(@:_config=) ppc mpc8xx fads
-
FLAGADM_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx flagadm
pcu_e_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx pcu_e siemens
+QS850_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
+
+QS823_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx qs850 snmc
+
+QS860T_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc8xx qs860t snmc
+
R360MPI_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8xx r360mpi
# All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock,
# but only 855 and 860 boards may come with FEC
# and 823 boards may have LCD support
-xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1)))))
+xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _133MHz,,$(subst _LCD,,$(subst _config,,$1))))))
FPS850L_config \
FPS860L_config \
TQM862M_config \
TQM862M_66MHz_config \
TQM862M_80MHz_config \
-TQM862M_100MHz_config: unconfig
+TQM862M_100MHz_config \
+TQM866M_config: unconfig
@ >include/config.h
@[ -z "$(findstring _66MHz,$@)" ] || \
{ echo "#define CONFIG_66MHz" >>include/config.h ; \
{ echo "#define CONFIG_100MHz" >>include/config.h ; \
echo "... with 100MHz system clock" ; \
}
+ @[ -z "$(findstring _133MHz,$@)" ] || \
+ { echo "#define CONFIG_133MHz" >>include/config.h ; \
+ echo "... with 133MHz system clock" ; \
+ }
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>include/config.h ; \
- echo "#define CONFIG_NEC_NL6648BC20" >>include/config.h ; \
+ echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \
echo "... with LCD display" ; \
}
@./mkconfig -a $(call xtract_8xx,$@) ppc mpc8xx tqm8xx
MUSENKI_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x musenki
+MVBLUE_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x mvblue
+
OXC_config: unconfig
@./mkconfig $(@:_config=) ppc mpc824x oxc
ZPC1900_config: unconfig
@./mkconfig $(@:_config=) ppc mpc8260 zpc1900
+#========================================================================
+# M68K
+#========================================================================
+#########################################################################
+## Coldfire
+#########################################################################
+
+M5272C3_config : unconfig
+ @./mkconfig $(@:_config=) m68k coldfire m5272c3
+
+M5282EVB_config : unconfig
+ @./mkconfig $(@:_config=) m68k coldfire m5282evb
+
+#########################################################################
+## MPC85xx Systems
+#########################################################################
+
+MPC8540ADS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8540ads
+
+MPC8560ADS_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc85xx mpc8560ads
+
#########################################################################
## 74xx/7xx Systems
#########################################################################
AmigaOneG3SE_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx AmigaOneG3SE MAI
+BAB7xx_config: unconfig
+ @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
+
+DB64360_config: unconfig
+ @./mkconfig DB64360 ppc 74xx_7xx db64360 Marvell
+
+DB64460_config: unconfig
+ @./mkconfig DB64460 ppc 74xx_7xx db64460 Marvell
+
+debris_config: unconfig
+ @./mkconfig $(@:_config=) ppc mpc824x debris etin
+
+ELPPC_config: unconfig
+ @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
+
EVB64260_config \
EVB64260_750CX_config: unconfig
@./mkconfig EVB64260 ppc 74xx_7xx evb64260
-ZUMA_config: unconfig
+P3G4_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
PCIPPC2_config \
PCIPPC6_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx pcippc2
-BAB7xx_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx bab7xx eltec
-
-ELPPC_config: unconfig
- @./mkconfig $(@:_config=) ppc 74xx_7xx elppc eltec
-
-P3G4_config: unconfig
+ZUMA_config: unconfig
@./mkconfig $(@:_config=) ppc 74xx_7xx evb64260
#========================================================================
smdk2410_config : unconfig
@./mkconfig $(@:_config=) arm arm920t smdk2410
+# TRAB default configuration: 8 MB Flash, 32 MB RAM
trab_config \
trab_bigram_config \
trab_bigflash_config \
trab_old_config: unconfig
@ >include/config.h
@[ -z "$(findstring _bigram,$@)" ] || \
- { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
+ { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
+ echo "#define CONFIG_RAM_32MB" >>include/config.h ; \
echo "... with 8 MB Flash, 32 MB RAM" ; \
}
@[ -z "$(findstring _bigflash,$@)" ] || \
- { echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
+ { echo "#define CONFIG_FLASH_16MB" >>include/config.h ; \
+ echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
echo "... with 16 MB Flash, 16 MB RAM" ; \
- echo "TEXT_BASE = 0x0CF00000" >board/trab/config.tmp ; \
+ echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
- { echo "#define CONFIG_OLD_VERSION" >>include/config.h ; \
- echo "... with small memory configuration" ; \
- echo "TEXT_BASE = 0x0CF00000" >board/trab/config.tmp ; \
+ { echo "#define CONFIG_FLASH_8MB" >>include/config.h ; \
+ echo "#define CONFIG_RAM_16MB" >>include/config.h ; \
+ echo "... with 8 MB Flash, 16 MB RAM" ; \
+ echo "TEXT_BASE = 0x0CF40000" >board/trab/config.tmp ; \
}
@./mkconfig -a $(call xtract_trab,$@) arm arm920t trab
innokom_config : unconfig
@./mkconfig $(@:_config=) arm pxa innokom
+ixdp425_config : unconfig
+ @./mkconfig $(@:_config=) arm ixp ixdp425
+
lubbock_config : unconfig
@./mkconfig $(@:_config=) arm pxa lubbock
purple_config : unconfig
@./mkconfig $(@:_config=) mips mips purple
+#========================================================================
+# Nios
+#========================================================================
+#########################################################################
+## Nios32
+#########################################################################
+
+DK1C20_safe_32_config \
+DK1C20_standard_32_config \
+DK1C20_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring _safe_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ echo "... NIOS 'safe_32' configuration" ; \
+ }
+ @[ -z "$(findstring _standard_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration" ; \
+ }
+ @[ -z "$(findstring DK1C20_config,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
+ }
+ @./mkconfig -a DK1C20 nios nios dk1c20 altera
+
+DK1S10_safe_32_config \
+DK1S10_standard_32_config \
+DK1S10_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring _safe_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_SAFE_32 1" >>include/config.h ; \
+ echo "... NIOS 'safe_32' configuration" ; \
+ }
+ @[ -z "$(findstring _standard_32,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration" ; \
+ }
+ @[ -z "$(findstring DK1S10_config,$@)" ] || \
+ { echo "#define CONFIG_NIOS_STANDARD_32 1" >>include/config.h ; \
+ echo "... NIOS 'standard_32' configuration (DEFAULT)" ; \
+ }
+ @./mkconfig -a DK1S10 nios nios dk1s10 altera
+
+
+#########################################################################
+## MIPS32 AU1X00
+#########################################################################
+dbau1000_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1000 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1100_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1100 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1500_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1500 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
#########################################################################
#########################################################################
rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
rm -f tools/env/fw_printenv tools/env/fw_setenv
rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
- rm -f board/trab/trab_fkt board/trab/config.tmp
+ rm -f board/trab/trab_fkt board/*/config.tmp
clobber: clean
find . -type f \