drivers/misc : move misc drivers to drivers/misc

[karo-tx-uboot.git] / Makefile

diff --git a/Makefile b/Makefile
index 2fe9a4682fcdb941fea55176f833fcdc90d43907..00a4e2a2a4a5dbbf30cf3aa0cfbfe3f03c57dad4 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2006
+# (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -22,7 +22,7 @@
 #
 
 VERSION = 1
-PATCHLEVEL = 2
+PATCHLEVEL = 3
 SUBLEVEL = 0
 EXTRAVERSION =
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
@@ -34,6 +34,7 @@ HOSTARCH := $(shell uname -m | \
            -e s/arm.*/arm/ \
            -e s/sa110/arm/ \
            -e s/powerpc/ppc/ \
+           -e s/ppc64/ppc/ \
            -e s/macppc/ppc/)
 
 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
@@ -122,7 +123,7 @@ ifeq ($(HOSTARCH),$(ARCH))
 CROSS_COMPILE =
 else
 ifeq ($(ARCH),ppc)
-CROSS_COMPILE = powerpc-linux-
+CROSS_COMPILE = ppc_8xx-
 endif
 ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm-linux-
@@ -173,9 +174,6 @@ endif
 ifeq ($(CPU),mpc85xx)
 OBJS += cpu/$(CPU)/resetvec.o
 endif
-ifeq ($(CPU),mpc86xx)
-OBJS += cpu/$(CPU)/resetvec.o
-endif
 ifeq ($(CPU),bf533)
 OBJS += cpu/$(CPU)/start1.o    cpu/$(CPU)/interrupt.o  cpu/$(CPU)/cache.o
 OBJS += cpu/$(CPU)/flush.o     cpu/$(CPU)/init_sdram.o
@@ -192,35 +190,56 @@ endif
 OBJS := $(addprefix $(obj),$(OBJS))
 
 LIBS  = lib_generic/libgeneric.a
+LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \
+       "board/$(VENDOR)/common/lib$(VENDOR).a"; fi)
 LIBS += board/$(BOARDDIR)/lib$(BOARD).a
 LIBS += cpu/$(CPU)/lib$(CPU).a
 ifdef SOC
 LIBS += cpu/$(CPU)/$(SOC)/lib$(SOC).a
 endif
+ifeq ($(CPU),ixp)
+LIBS += cpu/ixp/npe/libnpe.a
+endif
 LIBS += lib_$(ARCH)/lib$(ARCH).a
 LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \
        fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
-LIBS += rtc/librtc.a
-LIBS += dtt/libdtt.a
 LIBS += drivers/libdrivers.a
+LIBS += drivers/bios_emulator/libatibiosemu.a
+LIBS += drivers/block/libblock.a
+LIBS += drivers/hwmon/libhwmon.a
+LIBS += drivers/i2c/libi2c.a
+LIBS += drivers/input/libinput.a
+LIBS += drivers/misc/libmisc.a
 LIBS += drivers/nand/libnand.a
 LIBS += drivers/nand_legacy/libnand_legacy.a
+LIBS += drivers/net/libnet.a
+LIBS += drivers/net/sk98lin/libsk98lin.a
+LIBS += drivers/onenand/libonenand.a
+LIBS += drivers/pci/libpci.a
+LIBS += drivers/pcmcia/libpcmcia.a
+LIBS += drivers/rtc/librtc.a
+LIBS += drivers/serial/libserial.a
+LIBS += drivers/usb/libusb.a
+LIBS += drivers/video/libvideo.a
 ifeq ($(CPU),mpc83xx)
 LIBS += drivers/qe/qe.a
 endif
-LIBS += drivers/sk98lin/libsk98lin.a
+ifeq ($(CPU),mpc85xx)
+LIBS += drivers/qe/qe.a
+endif
 LIBS += post/libpost.a post/drivers/libpostdrivers.a
 LIBS += $(shell if [ -d post/lib_$(ARCH) ]; then echo \
        "post/lib_$(ARCH)/libpost$(ARCH).a"; fi)
+LIBS += $(shell if [ -d post/lib_$(ARCH)/fpu ]; then echo \
+       "post/lib_$(ARCH)/fpu/libpost$(ARCH)fpu.a"; fi)
 LIBS += $(shell if [ -d post/cpu/$(CPU) ]; then echo \
        "post/cpu/$(CPU)/libpost$(CPU).a"; fi)
 LIBS += $(shell if [ -d post/board/$(BOARDDIR) ]; then echo \
        "post/board/$(BOARDDIR)/libpost$(BOARD).a"; fi)
 LIBS += common/libcommon.a
 LIBS += libfdt/libfdt.a
-LIBS += $(BOARDLIBS)
 
 LIBS := $(addprefix $(obj),$(LIBS))
 .PHONY : $(LIBS)
@@ -246,7 +265,7 @@ __LIBS := $(subst $(obj),,$(LIBS))
 #########################################################################
 #########################################################################
 
-ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
+ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
 
 all:           $(ALL)
 
@@ -266,6 +285,9 @@ $(obj)u-boot.img:   $(obj)u-boot.bin
                        sed -e 's/"[     ]*$$/ for $(BOARD) board"/') \
                -d $< $@
 
+$(obj)u-boot.sha1:     $(obj)u-boot.bin
+               $(obj)tools/ubsha1 $(obj)u-boot.bin
+
 $(obj)u-boot.dis:      $(obj)u-boot
                $(OBJDUMP) -d $< > $@
 
@@ -306,7 +328,7 @@ updater:
 env:
                $(MAKE) -C tools/env all || exit 1
 
-depend dep:
+depend dep:    version
                for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir _depend ; done
 
 tags ctags:
@@ -379,7 +401,7 @@ BC3450_config:      unconfig
 cpci5200_config:  unconfig
        @$(MKCONFIG) -a cpci5200  ppc mpc5xxx cpci5200 esd
 
-hmi1001_config:         unconfig
+hmi1001_config:        unconfig
        @$(MKCONFIG) hmi1001 ppc mpc5xxx hmi1001
 
 Lite5200_config                                \
@@ -421,11 +443,11 @@ icecube_5100_config:                      unconfig
                }
        @$(MKCONFIG) -a IceCube ppc mpc5xxx icecube
 
-jupiter_config:         unconfig
+jupiter_config:        unconfig
        @$(MKCONFIG) jupiter ppc mpc5xxx jupiter
 
 v38b_config: unconfig
-       @./mkconfig -a v38b ppc mpc5xxx v38b
+       @$(MKCONFIG) -a v38b ppc mpc5xxx v38b
 
 inka4x0_config:        unconfig
        @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0
@@ -528,6 +550,9 @@ PM520_ROMBOOT_DDR_config:   unconfig
 smmaco4_config: unconfig
        @$(MKCONFIG) -a smmaco4 ppc mpc5xxx tqm5200
 
+cm5200_config: unconfig
+       @./mkconfig -a cm5200 ppc mpc5xxx cm5200
+
 spieval_config:        unconfig
        @$(MKCONFIG) -a spieval ppc mpc5xxx tqm5200
 
@@ -623,12 +648,19 @@ TQM5200_STK100_config:    unconfig
                { echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp ; \
                }
        @$(MKCONFIG) -n $@ -a TQM5200 ppc mpc5xxx tqm5200
-uc101_config:         unconfig
+uc101_config:          unconfig
        @$(MKCONFIG) uc101 ppc mpc5xxx uc101
-motionpro_config:         unconfig
+motionpro_config:      unconfig
        @$(MKCONFIG) motionpro ppc mpc5xxx motionpro
 
 
+#########################################################################
+## MPC512x Systems
+#########################################################################
+ads5121_config: unconfig
+       @$(MKCONFIG) ads5121 ppc mpc512x ads5121
+
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
@@ -642,6 +674,9 @@ AdderII_config  \
        @echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
        @$(MKCONFIG) -a Adder ppc mpc8xx adder
 
+AdderUSB_config:       unconfig
+       @./mkconfig -a AdderUSB ppc mpc8xx adder
+
 ADS860_config     \
 FADS823_config    \
 FADS850SAR_config \
@@ -903,7 +938,7 @@ RPXlite_DW_NVRAM_config             \
 RPXlite_DW_NVRAM_64_config      \
 RPXlite_DW_NVRAM_LCD_config    \
 RPXlite_DW_NVRAM_64_LCD_config  \
-RPXlite_DW_config:         unconfig
+RPXlite_DW_config:     unconfig
        @mkdir -p $(obj)include
        @ >$(obj)include/config.h
        @[ -z "$(findstring _64,$@)" ] || \
@@ -1015,11 +1050,19 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(
 acadia_config: unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
 
+acadia_nand_config:    unconfig
+       @mkdir -p $(obj)include $(obj)board/amcc/acadia
+       @mkdir -p $(obj)nand_spl/board/amcc/acadia
+       @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+       @$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
+       @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
+       @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
 ADCIOP_config: unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd
 
 alpr_config:   unconfig
-       @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive
+       @$(MKCONFIG) $(@:_config=) ppc ppc4xx alpr prodrive
 
 AP1000_config:unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix
@@ -1036,6 +1079,14 @@ ASH405_config:   unconfig
 bamboo_config: unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
 
+bamboo_nand_config:    unconfig
+       @mkdir -p $(obj)include $(obj)board/amcc/bamboo
+       @mkdir -p $(obj)nand_spl/board/amcc/bamboo
+       @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
+       @$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
+       @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
+       @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
 bubinga_config:        unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx bubinga amcc
 
@@ -1104,6 +1155,12 @@ EXBITGEN_config: unconfig
 G2000_config:  unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx g2000
 
+hcu4_config:   unconfig
+       @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu4 netstal
+
+hcu5_config:   unconfig
+       @$(MKCONFIG) $(@:_config=) ppc ppc4xx hcu5 netstal
+
 HH405_config:  unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx hh405 esd
 
@@ -1122,6 +1179,9 @@ katmai_config:    unconfig
 luan_config:   unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx luan amcc
 
+lwmon5_config: unconfig
+       @$(MKCONFIG) $(@:_config=) ppc ppc4xx lwmon5
+
 METROBOX_config: unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx metrobox sandburst
 
@@ -1208,9 +1268,8 @@ rainier_config: unconfig
 
 sequoia_nand_config \
 rainier_nand_config: unconfig
-       @mkdir -p $(obj)include
-       @mkdir -p $(obj)nand_spl
-       @mkdir -p $(obj)board/amcc/sequoia
+       @mkdir -p $(obj)include $(obj)board/amcc/sequoia
+       @mkdir -p $(obj)nand_spl/board/amcc/sequoia
        @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
        @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
                tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@@ -1219,7 +1278,10 @@ rainier_nand_config: unconfig
        @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
 
 sc3_config:unconfig
-       @./mkconfig $(@:_config=) ppc ppc4xx sc3
+       @$(MKCONFIG) $(@:_config=) ppc ppc4xx sc3
+
+taihu_config:  unconfig
+       @$(MKCONFIG) $(@:_config=) ppc ppc4xx taihu amcc
 
 taishan_config:        unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx taishan amcc
@@ -1258,6 +1320,9 @@ yellowstone_config: unconfig
 yucca_config:  unconfig
        @$(MKCONFIG) $(@:_config=) ppc ppc4xx yucca amcc
 
+zeus_config:   unconfig
+       @$(MKCONFIG) $(@:_config=) ppc ppc4xx zeus
+
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
@@ -1385,7 +1450,7 @@ ep8260_config:    unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep8260
 
 ep82xxm_config:        unconfig
-       @./mkconfig $(@:_config=) ppc mpc8260 ep82xxm
+       @$(MKCONFIG) $(@:_config=) ppc mpc8260 ep82xxm
 
 gw8260_config: unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc8260 gw8260
@@ -1585,6 +1650,31 @@ ZPC1900_config: unconfig
 ## Coldfire
 #########################################################################
 
+M5235EVB_config \
+M5235EVB_Flash16_config \
+M5235EVB_Flash32_config:       unconfig
+       @case "$@" in \
+       M5235EVB_config)                FLASH=16;; \
+       M5235EVB_Flash16_config)        FLASH=16;; \
+       M5235EVB_Flash32_config)        FLASH=32;; \
+       esac; \
+       >include/config.h ; \
+       if [ "$${FLASH}" != "16" ] ; then \
+               echo "#define NORFLASH_PS32BIT  1" >> include/config.h ; \
+               echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+               cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
+       else \
+               echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+               cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
+       fi
+       @$(MKCONFIG) -a M5235EVB m68k mcf523x m5235evb freescale
+
+M5249EVB_config :              unconfig
+       @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5249evb freescale
+
+M5253EVBE_config :             unconfig
+       @$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5253evbe freescale
+
 cobra5272_config :             unconfig
        @$(MKCONFIG) $(@:_config=) m68k mcf52x2 cobra5272
 
@@ -1620,74 +1710,153 @@ TASREG_config :                unconfig
 r5200_config :         unconfig
        @$(MKCONFIG) $(@:_config=) m68k mcf52x2 r5200
 
+M5329AFEE_config \
+M5329BFEE_config :     unconfig
+       @case "$@" in \
+       M5329AFEE_config)       NAND=0;; \
+       M5329BFEE_config)       NAND=16;; \
+       esac; \
+       >include/config.h ; \
+       if [ "$${NAND}" != "0" ] ; then \
+               echo "#define NANDFLASH_SIZE    $${NAND}" > $(obj)include/config.h ; \
+       fi
+       @$(MKCONFIG) -a M5329EVB m68k mcf532x m5329evb freescale
+
+M54455EVB_config \
+M54455EVB_atmel_config \
+M54455EVB_intel_config \
+M54455EVB_a33_config \
+M54455EVB_a66_config \
+M54455EVB_i33_config \
+M54455EVB_i66_config : unconfig
+       @case "$@" in \
+       M54455EVB_config)               FLASH=ATMEL; FREQ=33333333;; \
+       M54455EVB_atmel_config)         FLASH=ATMEL; FREQ=33333333;; \
+       M54455EVB_intel_config)         FLASH=INTEL; FREQ=33333333;; \
+       M54455EVB_a33_config)           FLASH=ATMEL; FREQ=33333333;; \
+       M54455EVB_a66_config)           FLASH=ATMEL; FREQ=66666666;; \
+       M54455EVB_i33_config)           FLASH=INTEL; FREQ=33333333;; \
+       M54455EVB_i66_config)           FLASH=INTEL; FREQ=66666666;; \
+       esac; \
+       >include/config.h ; \
+       if [ "$${FLASH}" == "INTEL" ] ; then \
+               echo "#undef CFG_ATMEL_BOOT" >> $(obj)include/config.h ; \
+               echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+               cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
+               echo "... with INTEL boot..." ; \
+       else \
+               echo "#define CFG_ATMEL_BOOT"   >> $(obj)include/config.h ; \
+               echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+               cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
+               echo "... with ATMEL boot..." ; \
+       fi; \
+       echo "#define CFG_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
+       echo "... with $${FREQ}Hz input clock"
+       @$(MKCONFIG) -a M54455EVB m68k mcf5445x m54455evb freescale
+
 #########################################################################
 ## MPC83xx Systems
 #########################################################################
 
+MPC8313ERDB_33_config \
+MPC8313ERDB_66_config: unconfig
+       @mkdir -p $(obj)include
+       @echo "" >$(obj)include/config.h ; \
+       if [ "$(findstring _33_,$@)" ] ; then \
+               echo -n "...33M ..." ; \
+               echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
+       fi ; \
+       if [ "$(findstring _66_,$@)" ] ; then \
+               echo -n "...66M..." ; \
+               echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
+       fi ;
+       @$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb freescale
+
+MPC8323ERDB_config:    unconfig
+       @$(MKCONFIG) -a MPC8323ERDB ppc mpc83xx mpc8323erdb freescale
+
 MPC832XEMDS_config \
 MPC832XEMDS_HOST_33_config \
 MPC832XEMDS_HOST_66_config \
-MPC832XEMDS_SLAVE_config:      unconfig
-       @echo "" >include/config.h ; \
+MPC832XEMDS_SLAVE_config \
+MPC832XEMDS_ATM_config:        unconfig
+       @mkdir -p $(obj)include
+       @echo "" >$(obj)include/config.h ; \
        if [ "$(findstring _HOST_,$@)" ] ; then \
                echo -n "... PCI HOST " ; \
-               echo "#define CONFIG_PCI" >>include/config.h ; \
+               echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _SLAVE_,$@)" ] ; then \
                echo "...PCI SLAVE 66M"  ; \
-               echo "#define CONFIG_PCI" >>include/config.h ; \
-               echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+               echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _33_,$@)" ] ; then \
                echo -n "...33M ..." ; \
-               echo "#define PCI_33M" >>include/config.h ; \
+               echo "#define PCI_33M" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _66_,$@)" ] ; then \
                echo -n "...66M..." ; \
-               echo "#define PCI_66M" >>include/config.h ; \
+               echo "#define PCI_66M" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+       fi ; \
+       if [ "$(findstring _ATM_,$@)" ] ; then \
+               echo -n "...ATM..." ; \
+               echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
        fi ;
-       @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
+       @$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds freescale
 
 MPC8349EMDS_config:    unconfig
-       @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds
+       @$(MKCONFIG) $(@:_config=) ppc mpc83xx mpc8349emds freescale
 
 MPC8349ITX_config \
 MPC8349ITX_LOWBOOT_config \
 MPC8349ITXGP_config:   unconfig
        @mkdir -p $(obj)include
-       @mkdir -p $(obj)board/mpc8349itx
+       @mkdir -p $(obj)board/freescale/mpc8349itx
        @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
        @if [ "$(findstring GP,$@)" ] ; then \
-               echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \
+               echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
        fi
        @if [ "$(findstring LOWBOOT,$@)" ] ; then \
-               echo "TEXT_BASE = 0xFE000000" >$(obj)board/mpc8349itx/config.tmp ; \
+               echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
        fi
-       @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx
+       @$(MKCONFIG) -a -n $(@:_config=) MPC8349ITX ppc mpc83xx mpc8349itx freescale
 
 MPC8360EMDS_config \
 MPC8360EMDS_HOST_33_config \
 MPC8360EMDS_HOST_66_config \
-MPC8360EMDS_SLAVE_config:      unconfig
-       @echo "" >include/config.h ; \
+MPC8360EMDS_SLAVE_config \
+MPC8360EMDS_ATM_config: unconfig
+       @mkdir -p $(obj)include
+       @echo "" >$(obj)include/config.h ; \
        if [ "$(findstring _HOST_,$@)" ] ; then \
                echo -n "... PCI HOST " ; \
-               echo "#define CONFIG_PCI" >>include/config.h ; \
+               echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _SLAVE_,$@)" ] ; then \
                echo "...PCI SLAVE 66M"  ; \
-               echo "#define CONFIG_PCI" >>include/config.h ; \
-               echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+               echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _33_,$@)" ] ; then \
                echo -n "...33M ..." ; \
-               echo "#define PCI_33M" >>include/config.h ; \
+               echo "#define PCI_33M" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
        fi ; \
        if [ "$(findstring _66_,$@)" ] ; then \
                echo -n "...66M..." ; \
-               echo "#define PCI_66M" >>include/config.h ; \
+               echo "#define PCI_66M" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+       fi ; \
+       if [ "$(findstring _ATM_,$@)" ] ; then \
+               echo -n "...ATM..." ; \
+               echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \
+               echo "#define CONFIG_PQ_MDS_PIB_ATM     1" >>$(obj)include/config.h ; \
        fi ;
-       @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
+       @$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds freescale
 
 sbc8349_config:                unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc83xx sbc8349
@@ -1711,10 +1880,10 @@ MPC8540EVAL_66_slave_config:      unconfig
        @mkdir -p $(obj)include
        @echo "" >$(obj)include/config.h ; \
        if [ "$(findstring _33_,$@)" ] ; then \
-               echo -n "... 33 MHz PCI" ; \
+               echo "... 33 MHz PCI" ; \
        else \
                echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
-               echo -n "... 66 MHz PCI" ; \
+               echo "... 66 MHz PCI" ; \
        fi ; \
        if [ "$(findstring _slave_,$@)" ] ; then \
                echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
@@ -1727,14 +1896,41 @@ MPC8540EVAL_66_slave_config:      unconfig
 MPC8560ADS_config:     unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8560ads
 
+MPC8541CDS_legacy_config \
 MPC8541CDS_config:     unconfig
-       @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8541cds cds
+       @mkdir -p $(obj)include
+       @echo "" >$(obj)include/config.h ; \
+       if [ "$(findstring _legacy_,$@)" ] ; then \
+               echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
+               echo "... legacy" ; \
+       fi
+       @$(MKCONFIG) -a MPC8541CDS ppc mpc85xx mpc8541cds cds
+
+MPC8544DS_config:      unconfig
+       @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8544ds freescale
 
+MPC8548CDS_legacy_config \
 MPC8548CDS_config:     unconfig
-       @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8548cds cds
+       @mkdir -p $(obj)include
+       @echo "" >$(obj)include/config.h ; \
+       if [ "$(findstring _legacy_,$@)" ] ; then \
+               echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
+               echo "... legacy" ; \
+       fi
+       @$(MKCONFIG) -a MPC8548CDS ppc mpc85xx mpc8548cds cds
 
+MPC8555CDS_legacy_config \
 MPC8555CDS_config:     unconfig
-       @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8555cds cds
+       @mkdir -p $(obj)include
+       @echo "" >$(obj)include/config.h ; \
+       if [ "$(findstring _legacy_,$@)" ] ; then \
+               echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \
+               echo "... legacy" ; \
+       fi
+       @$(MKCONFIG) -a MPC8555CDS ppc mpc85xx mpc8555cds cds
+
+MPC8568MDS_config:     unconfig
+       @$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds
 
 PM854_config:  unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx pm854
@@ -1771,8 +1967,16 @@ sbc8560_66_config:      unconfig
 stxgp3_config:         unconfig
        @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxgp3
 
-stxssa_config:         unconfig
-       @$(MKCONFIG) $(@:_config=) ppc mpc85xx stxssa
+stxssa_config          \
+stxssa_4M_config:      unconfig
+       @mkdir -p $(obj)include
+       @if [ "$(findstring _4M_,$@)" ] ; then \
+               echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \
+               echo "... with 4 MiB flash memory" ; \
+       else \
+               >$(obj)include/config.h ; \
+       fi
+       @$(MKCONFIG) -a stxssa ppc mpc85xx stxssa
 
 TQM8540_config         \
 TQM8541_config         \
@@ -1786,7 +1990,7 @@ TQM8560_config:           unconfig
        echo "#define CONFIG_TQM$${CTYPE}">>$(obj)include/config.h; \
        echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \
        echo "#define CONFIG_BOARDNAME \"TQM$${CTYPE}\"">>$(obj)include/config.h; \
-       echo "#define CFG_BOOTFILE \"bootfile=/tftpboot/tqm$${CTYPE}/uImage\0\"">>$(obj)include/config.h
+       echo "#define CFG_BOOTFILE_PATH \"/tftpboot/tqm$${CTYPE}/uImage\"">>$(obj)include/config.h
        @$(MKCONFIG) -a TQM85xx ppc mpc85xx tqm85xx
 
 #########################################################################
@@ -1794,8 +1998,10 @@ TQM8560_config:          unconfig
 #########################################################################
 
 MPC8641HPCN_config:    unconfig
-       @./mkconfig $(@:_config=) ppc mpc86xx mpc8641hpcn
+       @$(MKCONFIG) $(@:_config=) ppc mpc86xx mpc8641hpcn freescale
 
+sbc8641d_config:       unconfig
+       @./mkconfig $(@:_config=) ppc mpc86xx sbc8641d
 
 #########################################################################
 ## 74xx/7xx Systems
@@ -1807,13 +2013,13 @@ AmigaOneG3SE_config:    unconfig
 BAB7xx_config: unconfig
        @$(MKCONFIG) $(@:_config=) ppc 74xx_7xx bab7xx eltec
 
-CPCI750_config:        unconfig
+CPCI750_config:        unconfig
        @$(MKCONFIG) CPCI750 ppc 74xx_7xx cpci750 esd
 
-DB64360_config:  unconfig
+DB64360_config:        unconfig
        @$(MKCONFIG) DB64360 ppc 74xx_7xx db64360 Marvell
 
-DB64460_config:  unconfig
+DB64460_config:        unconfig
        @$(MKCONFIG) DB64460 ppc 74xx_7xx db64460 Marvell
 
 ELPPC_config: unconfig
@@ -1951,6 +2157,15 @@ omap1510inn_config :     unconfig
 omap5912osk_config :   unconfig
        @$(MKCONFIG) $(@:_config=) arm arm926ejs omap5912osk NULL omap
 
+davinci_dvevm_config : unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs dv-evm davinci davinci
+
+davinci_schmoogie_config :     unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs schmoogie davinci davinci
+
+davinci_sonata_config :        unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm926ejs sonata davinci davinci
+
 omap1610inn_config \
 omap1610inn_cs0boot_config \
 omap1610inn_cs3boot_config \
@@ -1961,13 +2176,13 @@ omap1610h2_cs3boot_config \
 omap1610h2_cs_autoboot_config: unconfig
        @mkdir -p $(obj)include
        @if [ "$(findstring _cs0boot_, $@)" ] ; then \
-               echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
+               echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
                echo "... configured for CS0 boot"; \
        elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
-               echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
+               echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
                echo "... configured for CS_AUTO boot"; \
        else \
-               echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
+               echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
                echo "... configured for CS3 boot"; \
        fi;
        @$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
@@ -2092,7 +2307,10 @@ evb4510_config : unconfig
        @$(MKCONFIG) $(@:_config=) arm arm720t evb4510
 
 lpc2292sodimm_config:  unconfig
-       @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm
+       @$(MKCONFIG) $(@:_config=) arm arm720t lpc2292sodimm NULL lpc2292
+
+SMN42_config   :       unconfig
+       @$(MKCONFIG) $(@:_config=) arm arm720t SMN42 siemens lpc2292
 
 #########################################################################
 ## XScale Systems
@@ -2133,17 +2351,21 @@ logodl_config   :       unconfig
 
 pdnb3_config \
 scpu_config:    unconfig
+       @mkdir -p $(obj)include
        @if [ "$(findstring scpu_,$@)" ] ; then \
-               echo "#define CONFIG_SCPU"      >>include/config.h ; \
+               echo "#define CONFIG_SCPU"      >>$(obj)include/config.h ; \
                echo "... on SCPU board variant" ; \
        else \
-               >include/config.h ; \
+               >$(obj)include/config.h ; \
        fi
        @$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
 
 pxa255_idp_config:     unconfig
        @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp
 
+trizepsiv_config       :       unconfig
+       @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv
+
 wepep250_config        :       unconfig
        @$(MKCONFIG) $(@:_config=) arm pxa wepep250
 
@@ -2359,14 +2581,16 @@ suzaku_config:  unconfig
        @$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
 
 ml401_config:  unconfig
-       @ >include/config.h
-       @echo "#define CONFIG_ML401 1" >> include/config.h
-       @./mkconfig -a $(@:_config=) microblaze microblaze ml401 xilinx
+       @mkdir -p $(obj)include
+       @ >$(obj)include/config.h
+       @echo "#define CONFIG_ML401 1" >> $(obj)include/config.h
+       @$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
 
 xupv2p_config: unconfig
-       @ >include/config.h
-       @echo "#define CONFIG_XUPV2P 1" >> include/config.h
-       @./mkconfig -a $(@:_config=) microblaze microblaze xupv2p xilinx
+       @mkdir -p $(obj)include
+       @ >$(obj)include/config.h
+       @echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h
+       @$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
 
 #########################################################################
 ## Blackfin
@@ -2391,7 +2615,7 @@ bf561-ezkit_config:       unconfig
 #########################################################################
 
 atstk1002_config       :       unconfig
-       @./mkconfig $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
+       @$(MKCONFIG) $(@:_config=) avr32 at32ap atstk1000 atmel at32ap7000
 
 #########################################################################
 #########################################################################
@@ -2408,7 +2632,7 @@ clean:
              $(obj)examples/smc91111_eeprom $(obj)examples/interrupt \
              $(obj)examples/test_burst
        rm -f $(obj)tools/img2srec $(obj)tools/mkimage $(obj)tools/envcrc \
-               $(obj)tools/gen_eth_addr
+               $(obj)tools/gen_eth_addr $(obj)tools/ubsha1
        rm -f $(obj)tools/mpc86x_clk $(obj)tools/ncb
        rm -f $(obj)tools/easylogo/easylogo $(obj)tools/bmp_logo
        rm -f $(obj)tools/gdb/astest $(obj)tools/gdb/gdbcont $(obj)tools/gdb/gdbsend
@@ -2431,7 +2655,7 @@ clobber:  clean
        rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h
        rm -fr $(obj)*.*~
        rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
-       rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c
+       rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c $(obj)tools/sha1.c
        rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
        rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
        [ ! -d $(OBJTREE)/nand_spl ] || find $(obj)nand_spl -lname "*" -print | xargs rm -f