AVR32: Clean up memory-map.h for at32ap7000

[karo-tx-uboot.git] / README

diff --git a/README b/README
index ecfd1f82f0987a708f58ccadaaeee5ebb94377f4..87d6d10717adc96522d1f040b616b827e4bdef55 100644 (file)
--- a/README
+++ b/README
@@ -164,6 +164,7 @@ Directory Hierarchy:
 - lib_mips     Files generic to MIPS    architecture
 - lib_nios     Files generic to NIOS    architecture
 - lib_ppc      Files generic to PowerPC architecture
+- libfdt       Library files to support flattened device trees
 - net          Networking code
 - post         Power On Self Test
 - rtc          Real Time Clock drivers
@@ -430,12 +431,23 @@ The following options need to be configured:
                expect it to be in bytes, others in MB.
                Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes.
 
-               CONFIG_OF_FLAT_TREE
+               CONFIG_OF_LIBFDT / CONFIG_OF_FLAT_TREE
 
                New kernel versions are expecting firmware settings to be
-               passed using flat open firmware trees.
-               The environment variable "disable_of", when set, disables this
-               functionality.
+               passed using flattened device trees (based on open firmware
+               concepts).
+
+               CONFIG_OF_LIBFDT
+                * New libfdt-based support
+                * Adds the "fdt" command
+                * The bootm command does _not_ modify the fdt
+
+               CONFIG_OF_FLAT_TREE
+                * Deprecated, see CONFIG_OF_LIBFDT
+                * Original ft_build.c-based support
+                * Automatically modifies the dft as part of the bootm command
+                * The environment variable "disable_of", when set,
+                    disables this functionality.
 
                CONFIG_OF_FLAT_TREE_MAX_SIZE
 
@@ -448,13 +460,16 @@ The following options need to be configured:
 
                CONFIG_OF_HAS_BD_T
 
-               The resulting flat device tree will have a copy of the bd_t.
-               Space should be pre-allocated in the dts for the bd_t.
+                * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command
+                * CONFIG_OF_FLAT_TREE - The resulting flat device tree
+                    will have a copy of the bd_t.  Space should be
+                    pre-allocated in the dts for the bd_t.
 
                CONFIG_OF_HAS_UBOOT_ENV
 
-               The resulting flat device tree will have a copy of u-boot's
-               environment variables
+                * CONFIG_OF_LIBFDT - enables the "fdt bd_t" command
+                * CONFIG_OF_FLAT_TREE - The resulting flat device tree
+                    will have a copy of u-boot's environment variables
 
                CONFIG_OF_BOARD_SETUP
 
@@ -721,6 +736,8 @@ The following options need to be configured:
 
                #define CONFIG_COMMANDS (CFG_CMD_ALL & ~CFG_CMD_NET)
 
+       Other Commands:
+               fdt (flattened device tree) command: CONFIG_OF_LIBFDT
 
        Note:   Don't enable the "icache" and "dcache" commands
                (configuration option CFG_CMD_CACHE) unless you know
@@ -1347,6 +1364,16 @@ The following options need to be configured:
                If defined, then this indicates the I2C bus number for DDR SPD.
                If not defined, then U-Boot assumes that SPD is on I2C bus 0.
 
+               CFG_RTC_BUS_NUM
+
+               If defined, then this indicates the I2C bus number for the RTC.
+               If not defined, then U-Boot assumes that RTC is on I2C bus 0.
+
+               CFG_DTT_BUS_NUM
+
+               If defined, then this indicates the I2C bus number for the DTT.
+               If not defined, then U-Boot assumes that DTT is on I2C bus 0.
+
                CONFIG_FSL_I2C
 
                Define this option if you want to use Freescale's I2C driver in