PowerPC based boards:
---------------------
- CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCI405
- CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC2
- CONFIG_AMX860 CONFIG_GTH CONFIG_PCIPPC6
- CONFIG_AP1000 CONFIG_gw8260 CONFIG_pcu_e
- CONFIG_AR405 CONFIG_hermes CONFIG_PIP405
- CONFIG_BAB7xx CONFIG_hymod CONFIG_PM826
+ CONFIG_ADCIOP CONFIG_FPS860L CONFIG_OXC
+ CONFIG_ADS860 CONFIG_GEN860T CONFIG_PCI405
+ CONFIG_AMX860 CONFIG_GENIETV CONFIG_PCIPPC2
+ CONFIG_AP1000 CONFIG_GTH CONFIG_PCIPPC6
+ CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e
+ CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405
+ CONFIG_BC3450 CONFIG_hymod CONFIG_PM826
CONFIG_c2mon CONFIG_IAD210 CONFIG_ppmc8260
CONFIG_CANBT CONFIG_ICU862 CONFIG_QS823
CONFIG_CCM CONFIG_IP860 CONFIG_QS850
CONFIG_FADS860T CONFIG_NX823 CONFIG_WALNUT
CONFIG_FLAGADM CONFIG_OCRTC CONFIG_ZPC1900
CONFIG_FPS850L CONFIG_ORSG CONFIG_ZUMA
- CONFIG_FPS860L CONFIG_OXC
ARM based boards:
-----------------
CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
CONFIG_CSB637, CONFIG_DELTA, CONFIG_DNP1110,
CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
- CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
+ CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400,
CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4,
- CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400,
- CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9
+ CONFIG_PLEB2, CONFIG_SHANNON, CONFIG_P2_OMAP730,
+ CONFIG_SMDK2400, CONFIG_SMDK2410, CONFIG_TRAB,
+ CONFIG_VCMA9
MicroBlaze based boards:
------------------------
------------------------
CONFIG_PCI5441 CONFIG_PK1C20
+ CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
- CPU Module Type: (if CONFIG_COGENT is defined)
frequency is this value multiplied by 13 MHz.
CFG_MONAHANS_TURBO_RUN_MODE_RATIO
-
+
Defines the Monahans turbo mode to oscillator
ratio. Valid values are 1 (default if undefined) and
- 2. The core frequency as calculated above is multiplied
+ 2. The core frequency as calculated above is multiplied
by this value.
-
+
- Linux Kernel Interface:
CONFIG_CLOCKS_IN_MHZ
for differential drivers: 0x00001000
for single ended drivers: 0x00005000
+- USB Device:
+ Define the below if you wish to use the USB console.
+ Once firmware is rebuilt from a serial console issue the
+ command "setenv stdin usbtty; setenv stdout usbtty" and
+ attach your usb cable. The Unix command "dmesg" should print
+ it has found a new device. The environment variable usbtty
+ can be set to gserial or cdc_acm to enable your device to
+ appear to a USB host as a Linux gserial device or a
+ Common Device Class Abstract Control Model serial device.
+ If you select usbtty = gserial you should be able to enumerate
+ a Linux host by
+ # modprobe usbserial vendor=0xVendorID product=0xProductID
+ else if using cdc_acm, simply setting the environment
+ variable usbtty to be cdc_acm should suffice. The following
+ might be defined in YourBoardName.h
+
+ CONFIG_USB_DEVICE
+ Define this to build a UDC device
+
+ CONFIG_USB_TTY
+ Define this to have a tty type of device available to
+ talk to the UDC device
+
+ CFG_CONSOLE_IS_IN_ENV
+ Define this if you want stdin, stdout &/or stderr to
+ be set to usbtty.
+
+ mpc8xx:
+ CFG_USB_EXTC_CLK 0xBLAH
+ Derive USB clock from external clock "blah"
+ - CFG_USB_EXTC_CLK 0x02
+
+ CFG_USB_BRG_CLK 0xBLAH
+ Derive USB clock from brgclk
+ - CFG_USB_BRG_CLK 0x04
+
+ If you have a USB-IF assigned VendorID then you may wish to
+ define your own vendor specific values either in BoardName.h
+ or directly in usbd_vendor_info.h. If you don't define
+ CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME,
+ CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot
+ should pretend to be a Linux device to it's target host.
+
+ CONFIG_USBD_MANUFACTURER
+ Define this string as the name of your company for
+ - CONFIG_USBD_MANUFACTURER "my company"
+
+ CONFIG_USBD_PRODUCT_NAME
+ Define this string as the name of your product
+ - CONFIG_USBD_PRODUCT_NAME "acme usb device"
+
+ CONFIG_USBD_VENDORID
+ Define this as your assigned Vendor ID from the USB
+ Implementors Forum. This *must* be a genuine Vendor ID
+ to avoid polluting the USB namespace.
+ - CONFIG_USBD_VENDORID 0xFFFF
+
+ CONFIG_USBD_PRODUCTID
+ Define this as the unique Product ID
+ for your device
+ - CONFIG_USBD_PRODUCTID 0xFFFF
+
- MMC Support:
The MMC controller on the Intel PXA is supported. To