mpc85xx/T1040QDS_D4: Add DDR4 support

[karo-tx-uboot.git] / README

diff --git a/README b/README
index ff4926040b5dea46117edb7d34a8d798b1c44390..bbd7399f53748d2b28ae5cc1e48ad6390a5a46bb 100644 (file)
--- a/README
+++ b/README
@@ -427,6 +427,10 @@ The following options need to be configured:
                In this mode, a single differential clock is used to supply
                clocks to the sysclock, ddrclock and usbclock.
 
+               CONFIG_SYS_CPC_REINIT_F
+               This CONFIG is defined when the CPC is configured as SRAM at the
+               time of U-boot entry and is required to be re-initialized.
+
 - Generic CPU options:
                CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN
 
@@ -454,6 +458,9 @@ The following options need to be configured:
                CONFIG_SYS_FSL_DDRC_GEN3
                Freescale DDR3 controller.
 
+               CONFIG_SYS_FSL_DDRC_GEN4
+               Freescale DDR4 controller.
+
                CONFIG_SYS_FSL_DDRC_ARM_GEN3
                Freescale DDR3 controller for ARM-based SoCs.
 
@@ -469,7 +476,15 @@ The following options need to be configured:
 
                CONFIG_SYS_FSL_DDR3
                Board config to use DDR3. It can be enabled for SoCs with
-               Freescale DDR3 controllers.
+               Freescale DDR3 or DDR3L controllers.
+
+               CONFIG_SYS_FSL_DDR3L
+               Board config to use DDR3L. It can be enabled for SoCs with
+               DDR3L controllers.
+
+               CONFIG_SYS_FSL_DDR4
+               Board config to use DDR4. It can be enabled for SoCs with
+               DDR4 controllers.
 
                CONFIG_SYS_FSL_IFC_BE
                Defines the IFC controller register space as Big Endian
@@ -566,6 +581,8 @@ The following options need to be configured:
                CONFIG_ARM_ERRATA_742230
                CONFIG_ARM_ERRATA_743622
                CONFIG_ARM_ERRATA_751472
+               CONFIG_ARM_ERRATA_794072
+               CONFIG_ARM_ERRATA_761320
 
                If set, the workarounds for these ARM errata are applied early
                during U-Boot startup. Note that these options force the
@@ -910,6 +927,7 @@ The following options need to be configured:
                The default command configuration includes all commands
                except those marked below with a "*".
 
+               CONFIG_CMD_AES            AES 128 CBC encrypt/decrypt
                CONFIG_CMD_ASKENV       * ask for env variable
                CONFIG_CMD_BDI            bdinfo
                CONFIG_CMD_BEDBUG       * Include BedBug Debugger
@@ -1012,7 +1030,7 @@ The following options need to be configured:
                CONFIG_CMD_CDP          * Cisco Discover Protocol support
                CONFIG_CMD_MFSL         * Microblaze FSL support
                CONFIG_CMD_XIMG           Load part of Multi Image
-
+               CONFIG_CMD_UUID         * Generate random UUID or GUID string
 
                EXAMPLE: If you want all functions except of network
                support you can write:
@@ -1525,6 +1543,16 @@ The following options need to be configured:
                this to the maximum filesize (in bytes) for the buffer.
                Default is 4 MiB if undefined.
 
+               DFU_DEFAULT_POLL_TIMEOUT
+               Poll timeout [ms], is the timeout a device can send to the
+               host. The host must wait for this timeout before sending
+               a subsequent DFU_GET_STATUS request to the device.
+
+               DFU_MANIFEST_POLL_TIMEOUT
+               Poll timeout [ms], which the device sends to the host when
+               entering dfuMANIFEST state. Host waits this timeout, before
+               sending again an USB request to the device.
+
 - Journaling Flash filesystem support:
                CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE,
                CONFIG_JFFS2_NAND_DEV
@@ -3470,6 +3498,9 @@ typically in board_init_f() and board_init_r().
 Configuration Settings:
 -----------------------
 
+- CONFIG_SYS_SUPPORT_64BIT_DATA: Defined automatically if compiled as 64-bit.
+               Optionally it can be defined to support 64-bit memory commands.
+
 - CONFIG_SYS_LONGHELP: Defined when you want long help messages included;
                undefine this when you're short of memory.
 
@@ -4482,8 +4513,13 @@ This firmware often needs to be loaded during U-Boot booting, so macros
 are used to identify the storage device (NOR flash, SPI, etc) and the address
 within that device.
 
-- CONFIG_SYS_QE_FMAN_FW_ADDR
-       The address in the storage device where the firmware is located.  The
+- CONFIG_SYS_FMAN_FW_ADDR
+       The address in the storage device where the FMAN microcode is located.  The
+       meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
+       is also specified.
+
+- CONFIG_SYS_QE_FW_ADDR
+       The address in the storage device where the QE microcode is located.  The
        meaning of this address depends on which CONFIG_SYS_QE_FW_IN_xxx macro
        is also specified.