Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64...

[karo-tx-linux.git] / arch / arm / boot / dts / at91sam9m10g45ek.dts

diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 1375d33626031d03829b53213502f530e9034f66..d1ae60a855d492ad45209df921e5004e7998796e 100644 (file)
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -63,6 +63,25 @@
 
                        i2c0: i2c@fff84000 {
                                status = "okay";
+                               ov2640: camera@30 {
+                                       compatible = "ovti,ov2640";
+                                       reg = <0x30>;
+                                       pinctrl-names = "default";
+                                       pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
+                                       resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
+                                       pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
+                                       clocks = <&pck1>;
+                                       clock-names = "xvclk";
+                                       assigned-clocks = <&pck1>;
+                                       assigned-clock-rates = <25000000>;
+
+                                       port {
+                                               ov2640_0: endpoint {
+                                                       remote-endpoint = <&isi_0>;
+                                                       bus-width = <8>;
+                                               };
+                                       };
+                               };
                        };
 
                        i2c1: i2c@fff88000 {
@@ -101,6 +120,22 @@
                        };
 
                        pinctrl@fffff200 {
+                               camera_sensor {
+                                       pinctrl_pck1_as_isi_mck: pck1_as_isi_mck-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOB 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_sensor_reset: sensor_reset-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 12 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+
+                                       pinctrl_sensor_power: sensor_power-0 {
+                                               atmel,pins =
+                                                       <AT91_PIOD 13 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+                                       };
+                               };
                                mmc0 {
                                        pinctrl_board_mmc0: mmc0-board {
                                                atmel,pins =
@@ -155,6 +190,18 @@
                                status = "okay";
                        };
 
+                       isi@fffb4000 {
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&pinctrl_isi_data_0_7>;
+                               status = "okay";
+                               port {
+                                       isi_0: endpoint {
+                                               remote-endpoint = <&ov2640_0>;
+                                               bus-width = <8>;
+                                       };
+                               };
+                       };
+
                        pwm0: pwm@fffb8000 {
                                status = "okay";