/dts-v1/;
/include/ "omap443x.dtsi"
-/include/ "elpida_ecb240abacn.dtsi"
-
-/ {
- model = "TI OMAP4 PandaBoard";
- compatible = "ti,omap4-panda", "ti,omap4430", "ti,omap4";
-
- memory {
- device_type = "memory";
- reg = <0x80000000 0x40000000>; /* 1 GB */
- };
-
- leds {
- compatible = "gpio-leds";
- heartbeat {
- label = "pandaboard::status1";
- gpios = <&gpio1 7 0>;
- linux,default-trigger = "heartbeat";
- };
-
- mmc {
- label = "pandaboard::status2";
- gpios = <&gpio1 8 0>;
- linux,default-trigger = "mmc0";
- };
- };
-
- sound: sound {
- compatible = "ti,abe-twl6040";
- ti,model = "PandaBoard";
-
- ti,mclk-freq = <38400000>;
-
- ti,mcpdm = <&mcpdm>;
-
- ti,twl6040 = <&twl6040>;
-
- /* Audio routing */
- ti,audio-routing =
- "Headset Stereophone", "HSOL",
- "Headset Stereophone", "HSOR",
- "Ext Spk", "HFL",
- "Ext Spk", "HFR",
- "Line Out", "AUXL",
- "Line Out", "AUXR",
- "HSMIC", "Headset Mic",
- "Headset Mic", "Headset Mic Bias",
- "AFML", "Line In",
- "AFMR", "Line In";
- };
-};
-
-&omap4_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &twl6040_pins
- &mcpdm_pins
- &mcbsp1_pins
- &dss_hdmi_pins
- &tpd12s015_pins
- >;
-
- twl6040_pins: pinmux_twl6040_pins {
- pinctrl-single,pins = <
- 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */
- 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */
- >;
- };
-
- mcpdm_pins: pinmux_mcpdm_pins {
- pinctrl-single,pins = <
- 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */
- 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */
- 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */
- 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */
- 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */
- >;
- };
-
- mcbsp1_pins: pinmux_mcbsp1_pins {
- pinctrl-single,pins = <
- 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */
- 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */
- 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */
- 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
- >;
- };
-
- dss_hdmi_pins: pinmux_dss_hdmi_pins {
- pinctrl-single,pins = <
- 0x5a 0x118 /* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
- 0x5c 0x118 /* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
- 0x5e 0x118 /* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
- >;
- };
-
- tpd12s015_pins: pinmux_tpd12s015_pins {
- pinctrl-single,pins = <
- 0x22 0x3 /* gpmc_a17.gpio_41 OUTPUT | MODE3 */
- 0x48 0x3 /* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
- 0x58 0x10b /* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
- >;
- };
-
- i2c1_pins: pinmux_i2c1_pins {
- pinctrl-single,pins = <
- 0xe2 0x118 /* i2c1_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe4 0x118 /* i2c1_sda PULLUP | INPUTENABLE | MODE0 */
- >;
- };
-
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- 0xe6 0x118 /* i2c2_scl PULLUP | INPUTENABLE | MODE0 */
- 0xe8 0x118 /* i2c2_sda PULLUP | INPUTENABLE | MODE0 */
- >;
- };
-
- i2c3_pins: pinmux_i2c3_pins {
- pinctrl-single,pins = <
- 0xea 0x118 /* i2c3_scl PULLUP | INPUTENABLE | MODE0 */
- 0xec 0x118 /* i2c3_sda PULLUP | INPUTENABLE | MODE0 */
- >;
- };
-
- i2c4_pins: pinmux_i2c4_pins {
- pinctrl-single,pins = <
- 0xee 0x118 /* i2c4_scl PULLUP | INPUTENABLE | MODE0 */
- 0xf0 0x118 /* i2c4_sda PULLUP | INPUTENABLE | MODE0 */
- >;
- };
-};
-
-&i2c1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins>;
-
- clock-frequency = <400000>;
-
- twl: twl@48 {
- reg = <0x48>;
- /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */
- interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */
- interrupt-parent = <&gic>;
- };
-
- twl6040: twl@4b {
- compatible = "ti,twl6040";
- reg = <0x4b>;
- /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */
- interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */
- interrupt-parent = <&gic>;
- ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */
-
- vio-supply = <&v1v8>;
- v2v1-supply = <&v2v1>;
- enable-active-high;
- };
-};
-
-/include/ "twl6030.dtsi"
-
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
-
- clock-frequency = <400000>;
-};
-
-&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_pins>;
-
- clock-frequency = <100000>;
-
- /*
- * Display monitor features are burnt in their EEPROM as EDID data.
- * The EEPROM is connected as I2C slave device.
- */
- eeprom@50 {
- compatible = "ti,eeprom";
- reg = <0x50>;
- };
-};
-
-&i2c4 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_pins>;
-
- clock-frequency = <400000>;
-};
-
-&mmc1 {
- vmmc-supply = <&vmmc>;
- bus-width = <8>;
-};
-
-&mmc2 {
- status = "disabled";
-};
-
-&mmc3 {
- status = "disabled";
-};
-
-&mmc4 {
- status = "disabled";
-};
-
-&mmc5 {
- ti,non-removable;
- bus-width = <4>;
-};
-
-&emif1 {
- cs1-used;
- device-handle = <&elpida_ECB240ABACN>;
-};
-
-&emif2 {
- cs1-used;
- device-handle = <&elpida_ECB240ABACN>;
-};
-
-&mcbsp2 {
- status = "disabled";
-};
-
-&mcbsp3 {
- status = "disabled";
-};
-
-&dmic {
- status = "disabled";
-};
-
-&twl_usb_comparator {
- usb-supply = <&vusb>;
-};
-
-&usb_otg_hs {
- interface-type = <1>;
- mode = <3>;
- power = <50>;
-};
+/include/ "omap4-panda-common.dtsi"
projects / karo-tx-linux.git / blobdiff