* Syed Mohammed Khasim <khasim@ti.com>
*
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <dm.h>
#include <spl.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mem.h>
#include <asm/cache.h>
#include <asm/armv7.h>
-#include <asm/arch/gpio.h>
+#include <asm/gpio.h>
#include <asm/omap_common.h>
-#include <asm/arch/mmc_host_def.h>
-#include <i2c.h>
#include <linux/compiler.h>
DECLARE_GLOBAL_DATA_PTR;
/* Declarations */
extern omap3_sysinfo sysinfo;
-static void omap3_setup_aux_cr(void);
#ifndef CONFIG_SYS_L2CACHE_OFF
static void omap3_invalidate_l2_cache_secure(void);
#endif
-static const struct gpio_bank gpio_bank_34xx[6] = {
- { (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO2_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO3_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO4_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO5_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP34XX_GPIO6_BASE, METHOD_GPIO_24XX },
+#ifdef CONFIG_DM_GPIO
+static const struct omap_gpio_platdata omap34xx_gpio[] = {
+ { 0, OMAP34XX_GPIO1_BASE },
+ { 1, OMAP34XX_GPIO2_BASE },
+ { 2, OMAP34XX_GPIO3_BASE },
+ { 3, OMAP34XX_GPIO4_BASE },
+ { 4, OMAP34XX_GPIO5_BASE },
+ { 5, OMAP34XX_GPIO6_BASE },
};
-const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
+U_BOOT_DEVICES(am33xx_gpios) = {
+ { "gpio_omap", &omap34xx_gpio[0] },
+ { "gpio_omap", &omap34xx_gpio[1] },
+ { "gpio_omap", &omap34xx_gpio[2] },
+ { "gpio_omap", &omap34xx_gpio[3] },
+ { "gpio_omap", &omap34xx_gpio[4] },
+ { "gpio_omap", &omap34xx_gpio[5] },
+};
-#ifdef CONFIG_SPL_BUILD
-/*
-* We use static variables because global data is not ready yet.
-* Initialized data is available in SPL right from the beginning.
-* We would not typically need to save these parameters in regular
-* U-Boot. This is needed only in SPL at the moment.
-*/
-u32 omap3_boot_device = BOOT_DEVICE_NAND;
-
-/* auto boot mode detection is not possible for OMAP3 - hard code */
-u32 spl_boot_mode(void)
-{
- switch (spl_boot_device()) {
- case BOOT_DEVICE_MMC2:
- return MMCSD_MODE_RAW;
- case BOOT_DEVICE_MMC1:
- return MMCSD_MODE_FAT;
- break;
- default:
- puts("spl: ERROR: unknown device - can't select boot mode\n");
- hang();
- }
-}
+#else
-u32 spl_boot_device(void)
-{
- return omap3_boot_device;
-}
+static const struct gpio_bank gpio_bank_34xx[6] = {
+ { (void *)OMAP34XX_GPIO1_BASE },
+ { (void *)OMAP34XX_GPIO2_BASE },
+ { (void *)OMAP34XX_GPIO3_BASE },
+ { (void *)OMAP34XX_GPIO4_BASE },
+ { (void *)OMAP34XX_GPIO5_BASE },
+ { (void *)OMAP34XX_GPIO6_BASE },
+};
-int board_mmc_init(bd_t *bis)
-{
- switch (spl_boot_device()) {
- case BOOT_DEVICE_MMC1:
- omap_mmc_init(0, 0, 0, -1, -1);
- break;
- case BOOT_DEVICE_MMC2:
- case BOOT_DEVICE_MMC2_2:
- omap_mmc_init(1, 0, 0, -1, -1);
- break;
- }
- return 0;
-}
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_34xx;
-void spl_board_init(void)
-{
-#if defined(CONFIG_SPL_NAND_SUPPORT) || defined(CONFIG_SPL_ONENAND_SUPPORT)
- gpmc_init();
#endif
-#ifdef CONFIG_SPL_I2C_SUPPORT
- i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-#endif
-}
-#endif /* CONFIG_SPL_BUILD */
-
/******************************************************************************
* Routine: secure_unlock
* configure secure registers and exit secure world
* general use.
*****************************************************************************/
-void secureworld_exit()
+void secureworld_exit(void)
{
unsigned long i;
* Description: If chip is GP/EMU(special) type, unlock the SRAM for
* general use.
*****************************************************************************/
-void try_unlock_memory()
+void try_unlock_memory(void)
{
int mode;
int in_sdram = is_running_in_sdram();
*****************************************************************************/
void s_init(void)
{
- int in_sdram = is_running_in_sdram();
-
watchdog_init();
try_unlock_memory();
- /* Errata workarounds */
- omap3_setup_aux_cr();
-
#ifndef CONFIG_SYS_L2CACHE_OFF
/* Invalidate L2-cache from secure mode */
omap3_invalidate_l2_cache_secure();
#ifdef CONFIG_USB_EHCI_OMAP
ehci_clocks_enable();
#endif
+}
#ifdef CONFIG_SPL_BUILD
- gd = &gdata;
-
- preloader_console_init();
-
- timer_init();
-#endif
-
- if (!in_sdram)
- mem_init();
+void board_init_f(ulong dummy)
+{
+ mem_init();
}
+#endif
/*
* Routine: misc_init_r
* Routine: wait_for_command_complete
* Description: Wait for posting to finish on watchdog
*****************************************************************************/
-void wait_for_command_complete(struct watchdog *wd_base)
+static void wait_for_command_complete(struct watchdog *wd_base)
{
int pending = 1;
do {
* should not be running and does not generate a PRCM reset.
*/
- sr32(&prcm_base->fclken_wkup, 5, 1, 1);
- sr32(&prcm_base->iclken_wkup, 5, 1, 1);
+ setbits_le32(&prcm_base->fclken_wkup, 0x20);
+ setbits_le32(&prcm_base->iclken_wkup, 0x20);
wait_on_value(ST_WDT2, 0x20, &prcm_base->idlest_wkup, 5);
writel(WD_UNLOCK1, &wd2_base->wspr);
*****************************************************************************/
static int do_switch_ecc(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
- if (argc != 2)
+ if (argc < 2 || argc > 3)
goto usage;
- if (strncmp(argv[1], "hw", 2) == 0)
- omap_nand_switch_ecc(1);
- else if (strncmp(argv[1], "sw", 2) == 0)
- omap_nand_switch_ecc(0);
- else
+
+ if (strncmp(argv[1], "hw", 2) == 0) {
+ if (argc == 2) {
+ omap_nand_switch_ecc(1, 1);
+ } else {
+ if (strncmp(argv[2], "hamming", 7) == 0)
+ omap_nand_switch_ecc(1, 1);
+ else if (strncmp(argv[2], "bch8", 4) == 0)
+ omap_nand_switch_ecc(1, 8);
+ else
+ goto usage;
+ }
+ } else if (strncmp(argv[1], "sw", 2) == 0) {
+ if (argc == 2) {
+ omap_nand_switch_ecc(0, 1);
+ } else {
+ if (strncmp(argv[2], "hamming", 7) == 0)
+ omap_nand_switch_ecc(0, 1);
+ else if (strncmp(argv[2], "bch8", 4) == 0)
+ omap_nand_switch_ecc(0, 8);
+ else
+ goto usage;
+ }
+ } else {
goto usage;
+ }
return 0;
}
U_BOOT_CMD(
- nandecc, 2, 1, do_switch_ecc,
+ nandecc, 3, 1, do_switch_ecc,
"switch OMAP3 NAND ECC calculation algorithm",
- "[hw/sw] - Switch between NAND hardware (hw) or software (sw) ecc algorithm"
+ "hw [hamming|bch8] - Switch between NAND hardware 1-bit hamming and"
+ " 8-bit BCH\n"
+ " ecc calculation (second parameter may"
+ " be omitted).\n"
+ "nandecc sw - Switch to NAND software ecc algorithm."
);
#endif /* CONFIG_NAND_OMAP_GPMC & !CONFIG_SPL_BUILD */
do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
}
-static void omap3_update_aux_cr_secure(u32 set_bits, u32 clear_bits)
+void __weak omap3_set_aux_cr_secure(u32 acr)
{
- u32 acr;
+ struct emu_hal_params emu_romcode_params;
- /* Read ACR */
- asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
- acr &= ~clear_bits;
- acr |= set_bits;
-
- if (get_device_type() == GP_DEVICE) {
- omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_WRITE_ACR,
- acr);
- } else {
- struct emu_hal_params emu_romcode_params;
- emu_romcode_params.num_params = 1;
- emu_romcode_params.param1 = acr;
- omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
- (u32 *)&emu_romcode_params);
- }
+ emu_romcode_params.num_params = 1;
+ emu_romcode_params.param1 = acr;
+ omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
+ (u32 *)&emu_romcode_params);
}
-static void omap3_setup_aux_cr(void)
+void v7_arch_cp15_set_acr(u32 acr, u32 cpu_midr, u32 cpu_rev_comb,
+ u32 cpu_variant, u32 cpu_rev)
{
- /* Workaround for Cortex-A8 errata: #454179 #430973
- * Set "IBE" bit
- * Set "Disable Branch Size Mispredicts" bit
- * Workaround for erratum #621766
- * Enable L1NEON bit
- * ACR |= (IBE | DBSM | L1NEON) => ACR |= 0xE0
- */
- omap3_update_aux_cr_secure(0xE0, 0);
+ /* Write ACR - affects secure banked bits */
+ if (get_device_type() == GP_DEVICE)
+ omap_smc1(OMAP3_GP_ROMCODE_API_WRITE_ACR, acr);
+ else
+ omap3_set_aux_cr_secure(acr);
+
+ /* Write ACR - affects non-secure banked bits - some erratas need it */
+ asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
}
+
#ifndef CONFIG_SYS_L2CACHE_OFF
static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
{
asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
acr &= ~clear_bits;
acr |= set_bits;
+ v7_arch_cp15_set_acr(acr, 0, 0, 0, 0);
- /* Write ACR - affects non-secure banked bits */
- asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
}
/* Invalidate the entire L2 cache from secure mode */
static void omap3_invalidate_l2_cache_secure(void)
{
if (get_device_type() == GP_DEVICE) {
- omap3_gp_romcode_call(OMAP3_GP_ROMCODE_API_L2_INVAL,
- 0);
+ omap_smc1(OMAP3_GP_ROMCODE_API_L2_INVAL, 0);
} else {
struct emu_hal_params emu_romcode_params;
emu_romcode_params.num_params = 1;
void v7_outer_cache_enable(void)
{
- /* Set L2EN */
- omap3_update_aux_cr_secure(0x2, 0);
/*
+ * Set L2EN
* On some revisions L2EN bit is banked on some revisions it's not
* No harm in setting both banked bits(in fact this is required
* by an erratum)
void omap3_outer_cache_disable(void)
{
- /* Clear L2EN */
- omap3_update_aux_cr_secure(0, 0x2);
-
/*
+ * Clear L2EN
* On some revisions L2EN bit is banked on some revisions it's not
* No harm in clearing both banked bits(in fact this is required
* by an erratum)
omap3_update_aux_cr(0, 0x2);
}
#endif /* !CONFIG_SYS_L2CACHE_OFF */
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
-}
-#endif /* !CONFIG_SYS_DCACHE_OFF */
projects / karo-tx-uboot.git / blobdiff