* Shashi Ranjan <shashiranjanmca05@gmail.com>
* Manikandan Pillai <mani.pillai@ti.com>
*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
return 0;
offset = readl(&sdrc_base->cs_cfg);
- offset = (offset & 15) << 27 | (offset & 0x30) << 17;
+ offset = (offset & 15) << 27 | (offset & 0x300) << 17;
return offset;
}
+/*
+ * write_sdrc_timings -
+ * - Takes CS and associated timings and initalize SDRAM
+ * - Test CS to make sure it's OK for use
+ */
+static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base,
+ struct board_sdrc_timings *timings)
+{
+ /* Setup timings we got from the board. */
+ writel(timings->mcfg, &sdrc_base->cs[cs].mcfg);
+ writel(timings->ctrla, &sdrc_actim_base->ctrla);
+ writel(timings->ctrlb, &sdrc_actim_base->ctrlb);
+ writel(timings->rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl);
+ writel(CMD_NOP, &sdrc_base->cs[cs].manual);
+ writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+ writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+ writel(timings->mr, &sdrc_base->cs[cs].mr);
+
+ /*
+ * Test ram in this bank
+ * Disable if bad or not present
+ */
+ if (!mem_ok(cs))
+ writel(0, &sdrc_base->cs[cs].mcfg);
+}
+
/*
* do_sdrc_init -
- * - Initialize the SDRAM for use.
- * - code called once in C-Stack only context for CS0 and a possible 2nd
- * time depending on memory configuration from stack+global context
+ * - Code called once in C-Stack only context for CS0 and with early being
+ * true and a possible 2nd time depending on memory configuration from
+ * stack+global context.
*/
void do_sdrc_init(u32 cs, u32 early)
{
struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1;
+ struct board_sdrc_timings timings;
+
+ sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
+ sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
+ /*
+ * When called in the early context this may be SPL and we will
+ * need to set all of the timings. This ends up being board
+ * specific so we call a helper function to take care of this
+ * for us. Otherwise, to be safe, we need to copy the settings
+ * from the first bank to the second. We will setup CS0,
+ * then set cs_cfg to the appropriate value then try and
+ * setup CS1.
+ */
+#ifdef CONFIG_SPL_BUILD
+ get_board_mem_timings(&timings);
+#endif
if (early) {
/* reset sdrc controller */
writel(SOFTRESET, &sdrc_base->sysconfig);
/* setup sdrc to ball mux */
writel(SDRC_SHARING, &sdrc_base->sharing);
- /* Disable Power Down of CKE cuz of 1 CKE on combo part */
+ /* Disable Power Down of CKE because of 1 CKE on combo part */
writel(WAKEUPPROC | SRFRONRESET | PAGEPOLICY_HIGH,
&sdrc_base->power);
writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl);
sdelay(0x20000);
- }
-
-/* As long as V_MCFG and V_RFR_CTRL is not defined for all OMAP3 boards we need
- * to prevent this to be build in non-SPL build */
#ifdef CONFIG_SPL_BUILD
- /* If we use a SPL there is no x-loader nor config header so we have
- * to do the job ourselfs
- */
- if (cs == CS0) {
- sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
-
- /* General SDRC config */
- writel(V_MCFG, &sdrc_base->cs[cs].mcfg);
- writel(V_RFR_CTRL, &sdrc_base->cs[cs].rfr_ctrl);
-
- /* AC timings */
- writel(V_ACTIMA_165, &sdrc_actim_base0->ctrla);
- writel(V_ACTIMB_165, &sdrc_actim_base0->ctrlb);
-
- /* Initialize */
- writel(CMD_NOP, &sdrc_base->cs[cs].manual);
- writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
+ write_sdrc_timings(CS0, sdrc_actim_base0, &timings);
+ make_cs1_contiguous();
+ write_sdrc_timings(CS1, sdrc_actim_base1, &timings);
+#endif
- writel(V_MR, &sdrc_base->cs[cs].mr);
}
-#endif
/*
- * SDRC timings are set up by x-load or config header
- * We don't need to redo them here.
- * Older x-loads configure only CS0
- * configure CS1 to handle this ommission
+ * If we aren't using SPL we have been loaded by some
+ * other means which may not have correctly initialized
+ * both CS0 and CS1 (such as some older versions of x-loader)
+ * so we may be asked now to setup CS1.
*/
if (cs == CS1) {
- sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE;
- sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE;
- writel(readl(&sdrc_base->cs[CS0].mcfg),
- &sdrc_base->cs[CS1].mcfg);
- writel(readl(&sdrc_base->cs[CS0].rfr_ctrl),
- &sdrc_base->cs[CS1].rfr_ctrl);
- writel(readl(&sdrc_actim_base0->ctrla),
- &sdrc_actim_base1->ctrla);
- writel(readl(&sdrc_actim_base0->ctrlb),
- &sdrc_actim_base1->ctrlb);
-
- writel(CMD_NOP, &sdrc_base->cs[cs].manual);
- writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
- writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual);
- writel(readl(&sdrc_base->cs[CS0].mr),
- &sdrc_base->cs[CS1].mr);
+ timings.mcfg = readl(&sdrc_base->cs[CS0].mcfg),
+ timings.rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl);
+ timings.ctrla = readl(&sdrc_actim_base0->ctrla);
+ timings.ctrlb = readl(&sdrc_actim_base0->ctrlb);
+ timings.mr = readl(&sdrc_base->cs[CS0].mr);
+ write_sdrc_timings(cs, sdrc_actim_base1, &timings);
}
-
- /*
- * Test ram in this bank
- * Disable if bad or not present
- */
- if (!mem_ok(cs))
- writel(0, &sdrc_base->cs[cs].mcfg);
}
/*