#define OMAP54XX_L4_WKUP_BASE 0x4Ae00000
#define OMAP54XX_L4_PER_BASE 0x48000000
-#define OMAP54XX_DRAM_ADDR_SPACE_START 0x80000000
-#define OMAP54XX_DRAM_ADDR_SPACE_END 0xFFFFFFFF
-#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START
-#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END
-
/* CONTROL ID CODE */
#define CONTROL_CORE_ID_CODE 0x4A002204
#define CONTROL_WKUP_ID_CODE 0x4AE0C204
-#ifdef CONFIG_DRA7XX
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
#define CONTROL_ID_CODE CONTROL_WKUP_ID_CODE
#else
#define CONTROL_ID_CODE CONTROL_CORE_ID_CODE
#endif
+#ifdef CONFIG_DRA7XX
+#define DRA7_USB_OTG_SS1_BASE 0x48890000
+#define DRA7_USB_OTG_SS1_GLUE_BASE 0x48880000
+#define DRA7_USB3_PHY1_PLL_CTRL 0x4A084C00
+#define DRA7_USB3_PHY1_POWER 0x4A002370
+#define DRA7_USB2_PHY1_POWER 0x4A002300
+
+#define DRA7_USB_OTG_SS2_BASE 0x488D0000
+#define DRA7_USB_OTG_SS2_GLUE_BASE 0x488C0000
+#define DRA7_USB2_PHY2_POWER 0x4A002E74
+#endif
+
/* To be verified */
#define OMAP5430_CONTROL_ID_CODE_ES1_0 0x0B94202F
#define OMAP5430_CONTROL_ID_CODE_ES2_0 0x1B94202F
#define OMAP5432_CONTROL_ID_CODE_ES1_0 0x0B99802F
#define OMAP5432_CONTROL_ID_CODE_ES2_0 0x1B99802F
#define DRA752_CONTROL_ID_CODE_ES1_0 0x0B99002F
+#define DRA752_CONTROL_ID_CODE_ES1_1 0x1B99002F
+#define DRA722_CONTROL_ID_CODE_ES1_0 0x0B9BC02F
/* UART */
#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000)
#define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000)
#define UART3_BASE (OMAP54XX_L4_PER_BASE + 0x20000)
+#define UART4_BASE (OMAP54XX_L4_PER_BASE + 0x6e000)
/* General Purpose Timers */
#define GPT1_BASE (OMAP54XX_L4_WKUP_BASE + 0x18000)
/* Watchdog Timer2 - MPU watchdog */
#define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000)
-/* GPMC */
-#define OMAP54XX_GPMC_BASE 0x50000000
+/* QSPI */
+#define QSPI_BASE 0x4B300000
+
+/* SATA */
+#define DWC_AHSATA_BASE 0x4A140000
/*
* Hardware Register Details
#define DDR_IO_2_VREF_CELLS_DDR3_VALUE 0x0
#define DDR_IO_I_40OHM_SR_SLOWEST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x7C7C7C7C
-#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64656465
+#define DDR_IO_I_40OHM_SR_FAST_WD_DQ_NO_PULL_DQS_NO_PULL_ES2 0x64646464
#define DDR_IO_0_VREF_CELLS_DDR3_VALUE_ES2 0xBAE8C631
-#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xB46318D8
+#define DDR_IO_1_VREF_CELLS_DDR3_VALUE_ES2 0xBC6318DC
#define DDR_IO_2_VREF_CELLS_DDR3_VALUE_ES2 0x84210000
#define EFUSE_1 0x45145100
#define EFUSE_4 0x45145100
#endif /* __ASSEMBLY__ */
-#ifdef CONFIG_DRA7XX
+/*
+ * In all cases, the TRM defines the RAM Memory Map for the processor
+ * and indicates the area for the downloaded image. We use all of that
+ * space for download and once up and running may use other parts of the
+ * map for our needs. We set a scratch space that is at the end of the
+ * OMAP5 download area, but within the DRA7xx download area (as it is
+ * much larger) and do not, at this time, make use of the additional
+ * space.
+ */
+#if defined(CONFIG_DRA7XX) || defined(CONFIG_AM57XX)
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40380000 /* Not inclusive */
#else
#define NON_SECURE_SRAM_START 0x40300000
#define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */
#endif
-#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
+#define SRAM_SCRATCH_SPACE_ADDR 0x4031E000
/* base address for indirect vectors (internal boot mode) */
#define SRAM_ROM_VECT_BASE 0x4031F000
/* ABB efuse masks */
#define OMAP5_ABB_FUSE_VSET_MASK (0x1F << 24)
#define OMAP5_ABB_FUSE_ENABLE_MASK (0x1 << 29)
+#define DRA7_ABB_FUSE_VSET_MASK (0x1F << 20)
+#define DRA7_ABB_FUSE_ENABLE_MASK (0x1 << 25)
#define OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK (0x1 << 10)
#define OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK (0x1f << 0)
u32 ctrl_ddrio_1;
u32 ctrl_ddrio_2;
u32 ctrl_emif_sdram_config_ext;
+ u32 ctrl_emif_sdram_config_ext_final;
u32 ctrl_ddr_ctrl_ext_0;
};
+
#endif /* __ASSEMBLY__ */
#endif