]> git.kernelconcepts.de Git - karo-tx-linux.git/blobdiff - arch/powerpc/platforms/pseries/rtasd.c
powerpc/chrp: Use the same RTAS daemon as pSeries
[karo-tx-linux.git] / arch / powerpc / platforms / pseries / rtasd.c
diff --git a/arch/powerpc/platforms/pseries/rtasd.c b/arch/powerpc/platforms/pseries/rtasd.c
deleted file mode 100644 (file)
index b3cbac8..0000000
+++ /dev/null
@@ -1,519 +0,0 @@
-/*
- * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Communication to userspace based on kernel/printk.c
- */
-
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/poll.h>
-#include <linux/proc_fs.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-#include <linux/spinlock.h>
-#include <linux/cpu.h>
-#include <linux/workqueue.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/rtas.h>
-#include <asm/prom.h>
-#include <asm/nvram.h>
-#include <asm/atomic.h>
-#include <asm/machdep.h>
-
-
-static DEFINE_SPINLOCK(rtasd_log_lock);
-
-static DECLARE_WAIT_QUEUE_HEAD(rtas_log_wait);
-
-static char *rtas_log_buf;
-static unsigned long rtas_log_start;
-static unsigned long rtas_log_size;
-
-static int surveillance_timeout = -1;
-static unsigned int rtas_error_log_max;
-static unsigned int rtas_error_log_buffer_max;
-
-/* RTAS service tokens */
-static unsigned int event_scan;
-static unsigned int rtas_event_scan_rate;
-
-static int full_rtas_msgs = 0;
-
-/* Stop logging to nvram after first fatal error */
-static int logging_enabled; /* Until we initialize everything,
-                             * make sure we don't try logging
-                             * anything */
-static int error_log_cnt;
-
-/*
- * Since we use 32 bit RTAS, the physical address of this must be below
- * 4G or else bad things happen. Allocate this in the kernel data and
- * make it big enough.
- */
-static unsigned char logdata[RTAS_ERROR_LOG_MAX];
-
-static char *rtas_type[] = {
-       "Unknown", "Retry", "TCE Error", "Internal Device Failure",
-       "Timeout", "Data Parity", "Address Parity", "Cache Parity",
-       "Address Invalid", "ECC Uncorrected", "ECC Corrupted",
-};
-
-static char *rtas_event_type(int type)
-{
-       if ((type > 0) && (type < 11))
-               return rtas_type[type];
-
-       switch (type) {
-               case RTAS_TYPE_EPOW:
-                       return "EPOW";
-               case RTAS_TYPE_PLATFORM:
-                       return "Platform Error";
-               case RTAS_TYPE_IO:
-                       return "I/O Event";
-               case RTAS_TYPE_INFO:
-                       return "Platform Information Event";
-               case RTAS_TYPE_DEALLOC:
-                       return "Resource Deallocation Event";
-               case RTAS_TYPE_DUMP:
-                       return "Dump Notification Event";
-       }
-
-       return rtas_type[0];
-}
-
-/* To see this info, grep RTAS /var/log/messages and each entry
- * will be collected together with obvious begin/end.
- * There will be a unique identifier on the begin and end lines.
- * This will persist across reboots.
- *
- * format of error logs returned from RTAS:
- * bytes       (size)  : contents
- * --------------------------------------------------------
- * 0-7         (8)     : rtas_error_log
- * 8-47                (40)    : extended info
- * 48-51       (4)     : vendor id
- * 52-1023 (vendor specific) : location code and debug data
- */
-static void printk_log_rtas(char *buf, int len)
-{
-
-       int i,j,n = 0;
-       int perline = 16;
-       char buffer[64];
-       char * str = "RTAS event";
-
-       if (full_rtas_msgs) {
-               printk(RTAS_DEBUG "%d -------- %s begin --------\n",
-                      error_log_cnt, str);
-
-               /*
-                * Print perline bytes on each line, each line will start
-                * with RTAS and a changing number, so syslogd will
-                * print lines that are otherwise the same.  Separate every
-                * 4 bytes with a space.
-                */
-               for (i = 0; i < len; i++) {
-                       j = i % perline;
-                       if (j == 0) {
-                               memset(buffer, 0, sizeof(buffer));
-                               n = sprintf(buffer, "RTAS %d:", i/perline);
-                       }
-
-                       if ((i % 4) == 0)
-                               n += sprintf(buffer+n, " ");
-
-                       n += sprintf(buffer+n, "%02x", (unsigned char)buf[i]);
-
-                       if (j == (perline-1))
-                               printk(KERN_DEBUG "%s\n", buffer);
-               }
-               if ((i % perline) != 0)
-                       printk(KERN_DEBUG "%s\n", buffer);
-
-               printk(RTAS_DEBUG "%d -------- %s end ----------\n",
-                      error_log_cnt, str);
-       } else {
-               struct rtas_error_log *errlog = (struct rtas_error_log *)buf;
-
-               printk(RTAS_DEBUG "event: %d, Type: %s, Severity: %d\n",
-                      error_log_cnt, rtas_event_type(errlog->type),
-                      errlog->severity);
-       }
-}
-
-static int log_rtas_len(char * buf)
-{
-       int len;
-       struct rtas_error_log *err;
-
-       /* rtas fixed header */
-       len = 8;
-       err = (struct rtas_error_log *)buf;
-       if (err->extended_log_length) {
-
-               /* extended header */
-               len += err->extended_log_length;
-       }
-
-       if (rtas_error_log_max == 0)
-               rtas_error_log_max = rtas_get_error_log_max();
-
-       if (len > rtas_error_log_max)
-               len = rtas_error_log_max;
-
-       return len;
-}
-
-/*
- * First write to nvram, if fatal error, that is the only
- * place we log the info.  The error will be picked up
- * on the next reboot by rtasd.  If not fatal, run the
- * method for the type of error.  Currently, only RTAS
- * errors have methods implemented, but in the future
- * there might be a need to store data in nvram before a
- * call to panic().
- *
- * XXX We write to nvram periodically, to indicate error has
- * been written and sync'd, but there is a possibility
- * that if we don't shutdown correctly, a duplicate error
- * record will be created on next reboot.
- */
-void pSeries_log_error(char *buf, unsigned int err_type, int fatal)
-{
-       unsigned long offset;
-       unsigned long s;
-       int len = 0;
-
-       pr_debug("rtasd: logging event\n");
-       if (buf == NULL)
-               return;
-
-       spin_lock_irqsave(&rtasd_log_lock, s);
-
-       /* get length and increase count */
-       switch (err_type & ERR_TYPE_MASK) {
-       case ERR_TYPE_RTAS_LOG:
-               len = log_rtas_len(buf);
-               if (!(err_type & ERR_FLAG_BOOT))
-                       error_log_cnt++;
-               break;
-       case ERR_TYPE_KERNEL_PANIC:
-       default:
-               WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
-               spin_unlock_irqrestore(&rtasd_log_lock, s);
-               return;
-       }
-
-       /* Write error to NVRAM */
-       if (logging_enabled && !(err_type & ERR_FLAG_BOOT))
-               nvram_write_error_log(buf, len, err_type, error_log_cnt);
-
-       /*
-        * rtas errors can occur during boot, and we do want to capture
-        * those somewhere, even if nvram isn't ready (why not?), and even
-        * if rtasd isn't ready. Put them into the boot log, at least.
-        */
-       if ((err_type & ERR_TYPE_MASK) == ERR_TYPE_RTAS_LOG)
-               printk_log_rtas(buf, len);
-
-       /* Check to see if we need to or have stopped logging */
-       if (fatal || !logging_enabled) {
-               logging_enabled = 0;
-               WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
-               spin_unlock_irqrestore(&rtasd_log_lock, s);
-               return;
-       }
-
-       /* call type specific method for error */
-       switch (err_type & ERR_TYPE_MASK) {
-       case ERR_TYPE_RTAS_LOG:
-               offset = rtas_error_log_buffer_max *
-                       ((rtas_log_start+rtas_log_size) & LOG_NUMBER_MASK);
-
-               /* First copy over sequence number */
-               memcpy(&rtas_log_buf[offset], (void *) &error_log_cnt, sizeof(int));
-
-               /* Second copy over error log data */
-               offset += sizeof(int);
-               memcpy(&rtas_log_buf[offset], buf, len);
-
-               if (rtas_log_size < LOG_NUMBER)
-                       rtas_log_size += 1;
-               else
-                       rtas_log_start += 1;
-
-               WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
-               spin_unlock_irqrestore(&rtasd_log_lock, s);
-               wake_up_interruptible(&rtas_log_wait);
-               break;
-       case ERR_TYPE_KERNEL_PANIC:
-       default:
-               WARN_ON_ONCE(!irqs_disabled()); /* @@@ DEBUG @@@ */
-               spin_unlock_irqrestore(&rtasd_log_lock, s);
-               return;
-       }
-
-}
-
-
-static int rtas_log_open(struct inode * inode, struct file * file)
-{
-       return 0;
-}
-
-static int rtas_log_release(struct inode * inode, struct file * file)
-{
-       return 0;
-}
-
-/* This will check if all events are logged, if they are then, we
- * know that we can safely clear the events in NVRAM.
- * Next we'll sit and wait for something else to log.
- */
-static ssize_t rtas_log_read(struct file * file, char __user * buf,
-                        size_t count, loff_t *ppos)
-{
-       int error;
-       char *tmp;
-       unsigned long s;
-       unsigned long offset;
-
-       if (!buf || count < rtas_error_log_buffer_max)
-               return -EINVAL;
-
-       count = rtas_error_log_buffer_max;
-
-       if (!access_ok(VERIFY_WRITE, buf, count))
-               return -EFAULT;
-
-       tmp = kmalloc(count, GFP_KERNEL);
-       if (!tmp)
-               return -ENOMEM;
-
-       spin_lock_irqsave(&rtasd_log_lock, s);
-       /* if it's 0, then we know we got the last one (the one in NVRAM) */
-       while (rtas_log_size == 0) {
-               if (file->f_flags & O_NONBLOCK) {
-                       spin_unlock_irqrestore(&rtasd_log_lock, s);
-                       error = -EAGAIN;
-                       goto out;
-               }
-
-               if (!logging_enabled) {
-                       spin_unlock_irqrestore(&rtasd_log_lock, s);
-                       error = -ENODATA;
-                       goto out;
-               }
-               nvram_clear_error_log();
-
-               spin_unlock_irqrestore(&rtasd_log_lock, s);
-               error = wait_event_interruptible(rtas_log_wait, rtas_log_size);
-               if (error)
-                       goto out;
-               spin_lock_irqsave(&rtasd_log_lock, s);
-       }
-
-       offset = rtas_error_log_buffer_max * (rtas_log_start & LOG_NUMBER_MASK);
-       memcpy(tmp, &rtas_log_buf[offset], count);
-
-       rtas_log_start += 1;
-       rtas_log_size -= 1;
-       spin_unlock_irqrestore(&rtasd_log_lock, s);
-
-       error = copy_to_user(buf, tmp, count) ? -EFAULT : count;
-out:
-       kfree(tmp);
-       return error;
-}
-
-static unsigned int rtas_log_poll(struct file *file, poll_table * wait)
-{
-       poll_wait(file, &rtas_log_wait, wait);
-       if (rtas_log_size)
-               return POLLIN | POLLRDNORM;
-       return 0;
-}
-
-static const struct file_operations proc_rtas_log_operations = {
-       .read =         rtas_log_read,
-       .poll =         rtas_log_poll,
-       .open =         rtas_log_open,
-       .release =      rtas_log_release,
-};
-
-static int enable_surveillance(int timeout)
-{
-       int error;
-
-       error = rtas_set_indicator(SURVEILLANCE_TOKEN, 0, timeout);
-
-       if (error == 0)
-               return 0;
-
-       if (error == -EINVAL) {
-               printk(KERN_DEBUG "rtasd: surveillance not supported\n");
-               return 0;
-       }
-
-       printk(KERN_ERR "rtasd: could not update surveillance\n");
-       return -1;
-}
-
-static void do_event_scan(void)
-{
-       int error;
-       do {
-               memset(logdata, 0, rtas_error_log_max);
-               error = rtas_call(event_scan, 4, 1, NULL,
-                                 RTAS_EVENT_SCAN_ALL_EVENTS, 0,
-                                 __pa(logdata), rtas_error_log_max);
-               if (error == -1) {
-                       printk(KERN_ERR "event-scan failed\n");
-                       break;
-               }
-
-               if (error == 0)
-                       pSeries_log_error(logdata, ERR_TYPE_RTAS_LOG, 0);
-
-       } while(error == 0);
-}
-
-static void rtas_event_scan(struct work_struct *w);
-DECLARE_DELAYED_WORK(event_scan_work, rtas_event_scan);
-
-/*
- * Delay should be at least one second since some machines have problems if
- * we call event-scan too quickly.
- */
-static unsigned long event_scan_delay = 1*HZ;
-static int first_pass = 1;
-
-static void rtas_event_scan(struct work_struct *w)
-{
-       unsigned int cpu;
-
-       do_event_scan();
-
-       get_online_cpus();
-
-       cpu = next_cpu(smp_processor_id(), cpu_online_map);
-       if (cpu == NR_CPUS) {
-               cpu = first_cpu(cpu_online_map);
-
-               if (first_pass) {
-                       first_pass = 0;
-                       event_scan_delay = 30*HZ/rtas_event_scan_rate;
-
-                       if (surveillance_timeout != -1) {
-                               pr_debug("rtasd: enabling surveillance\n");
-                               enable_surveillance(surveillance_timeout);
-                               pr_debug("rtasd: surveillance enabled\n");
-                       }
-               }
-       }
-
-       schedule_delayed_work_on(cpu, &event_scan_work,
-               __round_jiffies_relative(event_scan_delay, cpu));
-
-       put_online_cpus();
-}
-
-static void start_event_scan(void)
-{
-       unsigned int err_type;
-       int rc;
-
-       printk(KERN_DEBUG "RTAS daemon started\n");
-       pr_debug("rtasd: will sleep for %d milliseconds\n",
-                (30000 / rtas_event_scan_rate));
-
-       /* See if we have any error stored in NVRAM */
-       memset(logdata, 0, rtas_error_log_max);
-       rc = nvram_read_error_log(logdata, rtas_error_log_max,
-                                 &err_type, &error_log_cnt);
-       /* We can use rtas_log_buf now */
-       logging_enabled = 1;
-
-       if (!rc) {
-               if (err_type != ERR_FLAG_ALREADY_LOGGED) {
-                       pSeries_log_error(logdata, err_type | ERR_FLAG_BOOT, 0);
-               }
-       }
-
-       schedule_delayed_work_on(first_cpu(cpu_online_map), &event_scan_work,
-                                event_scan_delay);
-}
-
-static int __init rtas_init(void)
-{
-       struct proc_dir_entry *entry;
-
-       if (!machine_is(pseries))
-               return 0;
-
-       /* No RTAS */
-       event_scan = rtas_token("event-scan");
-       if (event_scan == RTAS_UNKNOWN_SERVICE) {
-               printk(KERN_DEBUG "rtasd: no event-scan on system\n");
-               return -ENODEV;
-       }
-
-       rtas_event_scan_rate = rtas_token("rtas-event-scan-rate");
-       if (rtas_event_scan_rate == RTAS_UNKNOWN_SERVICE) {
-               printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n");
-               return -ENODEV;
-       }
-
-       /* Make room for the sequence number */
-       rtas_error_log_max = rtas_get_error_log_max();
-       rtas_error_log_buffer_max = rtas_error_log_max + sizeof(int);
-
-       rtas_log_buf = vmalloc(rtas_error_log_buffer_max*LOG_NUMBER);
-       if (!rtas_log_buf) {
-               printk(KERN_ERR "rtasd: no memory\n");
-               return -ENOMEM;
-       }
-
-       entry = proc_create("ppc64/rtas/error_log", S_IRUSR, NULL,
-                           &proc_rtas_log_operations);
-       if (!entry)
-               printk(KERN_ERR "Failed to create error_log proc entry\n");
-
-       start_event_scan();
-
-       return 0;
-}
-
-static int __init surveillance_setup(char *str)
-{
-       int i;
-
-       if (get_option(&str,&i)) {
-               if (i >= 0 && i <= 255)
-                       surveillance_timeout = i;
-       }
-
-       return 1;
-}
-
-static int __init rtasmsgs_setup(char *str)
-{
-       if (strcmp(str, "on") == 0)
-               full_rtas_msgs = 1;
-       else if (strcmp(str, "off") == 0)
-               full_rtas_msgs = 0;
-
-       return 1;
-}
-__initcall(rtas_init);
-__setup("surveillance=", surveillance_setup);
-__setup("rtasmsgs=", rtasmsgs_setup);