x86: Support Intel FSP initialization path in start.S

[karo-tx-uboot.git] / arch / x86 / cpu / start.S

diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S
index 329bb3ab35bdce43bc83692c16b60fac04529a8a..125782cf2796768bf281dc204f75355686b7827c 100644 (file)
--- a/arch/x86/cpu/start.S
+++ b/arch/x86/cpu/start.S
@@ -1,5 +1,5 @@
 /*
- *  U-boot - x86 Startup Code
+ *  U-Boot - x86 Startup Code
  *
  * (C) Copyright 2008-2011
  * Graeme Russ, <graeme.russ@gmail.com>
@@ -13,9 +13,11 @@
 #include <config.h>
 #include <version.h>
 #include <asm/global_data.h>
+#include <asm/post.h>
 #include <asm/processor.h>
 #include <asm/processor-flags.h>
 #include <generated/generic-asm-offsets.h>
+#include <generated/asm-offsets.h>
 
 .section .text
 .code32
@@ -49,6 +51,8 @@ _start:
         */
        movw    $GD_FLG_COLD_BOOT, %bx
 1:
+       /* Save BIST */
+       movl    %eax, %ebp
 
        /* Load the segement registes to match the gdt loaded in start16.S */
        movl    $(X86_GDT_ENTRY_32BIT_DS * X86_GDT_ENTRY_SIZE), %eax
@@ -65,27 +69,61 @@ _start:
        jmp     early_board_init
 .globl early_board_init_ret
 early_board_init_ret:
+       post_code(POST_START)
 
        /* Initialise Cache-As-RAM */
        jmp     car_init
 .globl car_init_ret
 car_init_ret:
+#ifndef CONFIG_HAVE_FSP
        /*
         * We now have CONFIG_SYS_CAR_SIZE bytes of Cache-As-RAM (or SRAM,
         * or fully initialised SDRAM - we really don't care which)
         * starting at CONFIG_SYS_CAR_ADDR to be used as a temporary stack
+        * and early malloc area. The MRC requires some space at the top.
+        *
+        * Stack grows down from top of CAR. We have:
+        *
+        * top-> CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE
+        *      MRC area
+        *      global_data
+        *      x86 global descriptor table
+        *      early malloc area
+        *      stack
+        * bottom-> CONFIG_SYS_CAR_ADDR
         */
-
-       /* Stack grows down from top of CAR */
-       movl    $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE), %esp
+       movl    $(CONFIG_SYS_CAR_ADDR + CONFIG_SYS_CAR_SIZE - 4), %esp
+#ifdef CONFIG_DCACHE_RAM_MRC_VAR_SIZE
+       subl    $CONFIG_DCACHE_RAM_MRC_VAR_SIZE, %esp
+#endif
+#else
+       /*
+        * When we get here after car_init, esp points to a temporary stack
+        * and esi holds the HOB list address returned by the FSP.
+        */
+#endif
 
        /* Reserve space on stack for global data */
        subl    $GENERATED_GBL_DATA_SIZE, %esp
 
        /* Align global data to 16-byte boundary */
        andl    $0xfffffff0, %esp
+       post_code(POST_START_STACK)
 
-       /* Setup first parameter to setup_gdt */
+       /* Zero the global data since it won't happen later */
+       xorl    %eax, %eax
+       movl    $GENERATED_GBL_DATA_SIZE, %ecx
+       movl    %esp, %edi
+       rep     stosb
+
+#ifdef CONFIG_HAVE_FSP
+       /* Store HOB list */
+       movl    %esp, %edx
+       addl    $GD_HOB_LIST, %edx
+       movl    %esi, (%edx)
+#endif
+
+       /* Setup first parameter to setup_gdt, pointer to global_data */
        movl    %esp, %eax
 
        /* Reserve space for global descriptor table */
@@ -93,16 +131,28 @@ car_init_ret:
 
        /* Align temporary global descriptor table to 16-byte boundary */
        andl    $0xfffffff0, %esp
+       movl    %esp, %ecx
+
+#if defined(CONFIG_SYS_MALLOC_F_LEN)
+       subl    $CONFIG_SYS_MALLOC_F_LEN, %esp
+       movl    %eax, %edx
+       addl    $GD_MALLOC_BASE, %edx
+       movl    %esp, (%edx)
+#endif
+       /* Store BIST */
+       movl    %eax, %edx
+       addl    $GD_BIST, %edx
+       movl    %ebp, (%edx)
 
        /* Set second parameter to setup_gdt */
-       movl    %esp, %edx
+       movl    %ecx, %edx
 
        /* Setup global descriptor table so gd->xyz works */
        call    setup_gdt
 
        /* Set parameter to board_init_f() to boot flags */
+       post_code(POST_START_DONE)
        xorl    %eax, %eax
-       movw    %bx, %ax
 
        /* Enter, U-boot! */
        call    board_init_f