#include <linux/clockchips.h>
#include <linux/acpi_pmtmr.h>
#include <linux/module.h>
+#include <linux/dmar.h>
#include <asm/atomic.h>
#include <asm/smp.h>
#include <asm/proto.h>
#include <asm/timex.h>
#include <asm/apic.h>
+#include <asm/i8259.h>
#include <mach_ipi.h>
#include <mach_apic.h>
+/* Disable local APIC timer from the kernel commandline or via dmi quirk */
static int disable_apic_timer __cpuinitdata;
static int apic_calibrate_pmtmr __initdata;
int disable_apic;
+int disable_x2apic;
+int x2apic;
+
+/* x2apic enabled before OS handover */
+int x2apic_preenabled;
/* Local APIC timer works in C2 */
int local_apic_timer_c2_ok;
static void lapic_timer_broadcast(cpumask_t mask);
static void apic_pm_activate(void);
+/*
+ * The local apic timer can be used for any function which is CPU local.
+ */
static struct clock_event_device lapic_clockevent = {
.name = "lapic",
.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT
}
/*
- * Check, if the APIC is integrated or a seperate chip
+ * Check, if the APIC is integrated or a separate chip
*/
static inline int lapic_is_integrated(void)
{
+#ifdef CONFIG_X86_64
return 1;
+#else
+ return APIC_INTEGRATED(lapic_get_version());
+#endif
}
/*
return lapic_get_version() >= 0x14;
}
-void apic_wait_icr_idle(void)
+/*
+ * Paravirt kernels also might be using these below ops. So we still
+ * use generic apic_read()/apic_write(), which might be pointing to different
+ * ops in PARAVIRT case.
+ */
+void xapic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
cpu_relax();
}
-u32 safe_apic_wait_icr_idle(void)
+u32 safe_xapic_wait_icr_idle(void)
{
u32 send_status;
int timeout;
return send_status;
}
+void xapic_icr_write(u32 low, u32 id)
+{
+ apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id));
+ apic_write(APIC_ICR, low);
+}
+
+u64 xapic_icr_read(void)
+{
+ u32 icr1, icr2;
+
+ icr2 = apic_read(APIC_ICR2);
+ icr1 = apic_read(APIC_ICR);
+
+ return icr1 | ((u64)icr2 << 32);
+}
+
+static struct apic_ops xapic_ops = {
+ .read = native_apic_mem_read,
+ .write = native_apic_mem_write,
+ .icr_read = xapic_icr_read,
+ .icr_write = xapic_icr_write,
+ .wait_icr_idle = xapic_wait_icr_idle,
+ .safe_wait_icr_idle = safe_xapic_wait_icr_idle,
+};
+
+struct apic_ops __read_mostly *apic_ops = &xapic_ops;
+EXPORT_SYMBOL_GPL(apic_ops);
+
+static void x2apic_wait_icr_idle(void)
+{
+ /* no need to wait for icr idle in x2apic */
+ return;
+}
+
+static u32 safe_x2apic_wait_icr_idle(void)
+{
+ /* no need to wait for icr idle in x2apic */
+ return 0;
+}
+
+void x2apic_icr_write(u32 low, u32 id)
+{
+ wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low);
+}
+
+u64 x2apic_icr_read(void)
+{
+ unsigned long val;
+
+ rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val);
+ return val;
+}
+
+static struct apic_ops x2apic_ops = {
+ .read = native_apic_msr_read,
+ .write = native_apic_msr_write,
+ .icr_read = x2apic_icr_read,
+ .icr_write = x2apic_icr_write,
+ .wait_icr_idle = x2apic_wait_icr_idle,
+ .safe_wait_icr_idle = safe_x2apic_wait_icr_idle,
+};
+
/**
* enable_NMI_through_LVT0 - enable NMI through local vector table 0
*/
/* unmask and set to NMI */
v = APIC_DM_NMI;
+
+ /* Level triggered for 82489DX (32bit mode) */
+ if (!lapic_is_integrated())
+ v |= APIC_LVT_LEVEL_TRIGGER;
+
apic_write(APIC_LVT0, v);
}
*/
int lapic_get_maxlvt(void)
{
- unsigned int v, maxlvt;
+ unsigned int v;
v = apic_read(APIC_LVR);
- maxlvt = GET_APIC_MAXLVT(v);
- return maxlvt;
+ /*
+ * - we always have APIC integrated on 64bit mode
+ * - 82489DXs do not report # of LVT entries
+ */
+ return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2;
}
+/*
+ * Local APIC timer
+ */
+
+/* Clock divisor */
+#ifdef CONFG_X86_64
+#define APIC_DIVISOR 1
+#else
+#define APIC_DIVISOR 16
+#endif
+
/*
* This function sets up the local APIC timer, with a timeout of
* 'clocks' APIC bus clock. During calibration we actually call
* We do reads before writes even if unnecessary, to get around the
* P5 APIC double write bug.
*/
-
static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen)
{
unsigned int lvtt_value, tmp_value;
lvtt_value = LOCAL_TIMER_VECTOR;
if (!oneshot)
lvtt_value |= APIC_LVT_TIMER_PERIODIC;
+ if (!lapic_is_integrated())
+ lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV);
+
if (!irqen)
lvtt_value |= APIC_LVT_MASKED;
* Divide PICLK by 16
*/
tmp_value = apic_read(APIC_TDCR);
- apic_write(APIC_TDCR, (tmp_value
- & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE))
- | APIC_TDR_DIV_16);
+ apic_write(APIC_TDCR,
+ (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) |
+ APIC_TDR_DIV_16);
if (!oneshot)
- apic_write(APIC_TMICT, clocks);
+ apic_write(APIC_TMICT, clocks / APIC_DIVISOR);
}
/*
*
* Vector mappings are hard coded. On K8 only offset 0 (APIC500) and
* MCE interrupts are supported. Thus MCE offset must be set to 0.
+ *
+ * If mask=1, the LVT entry does not generate interrupts while mask=0
+ * enables the vector. See also the BKDGs.
*/
#define APIC_EILVT_LVTOFF_MCE 0
setup_APIC_eilvt(APIC_EILVT_LVTOFF_IBS, vector, msg_type, mask);
return APIC_EILVT_LVTOFF_IBS;
}
+EXPORT_SYMBOL_GPL(setup_APIC_eilvt_ibs);
/*
* Program the next event, relative to now
lapic_clockevent.min_delta_ns =
clockevent_delta2ns(0xF, &lapic_clockevent);
- calibration_result = result / HZ;
+ calibration_result = (result * APIC_DIVISOR) / HZ;
/*
* Do a sanity check on the APIC calibration result
void __init setup_boot_APIC_clock(void)
{
/*
- * The local apic timer can be disabled via the kernel commandline.
- * Register the lapic timer as a dummy clock event source on SMP
- * systems, so the broadcast mechanism is used. On UP systems simply
- * ignore it.
+ * The local apic timer can be disabled via the kernel
+ * commandline or from the CPU detection code. Register the lapic
+ * timer as a dummy clock event source on SMP systems, so the
+ * broadcast mechanism is used. On UP systems simply ignore it.
*/
if (disable_apic_timer) {
printk(KERN_INFO "Disabling APIC timer\n");
return;
}
- printk(KERN_INFO "Using local APIC timer interrupts.\n");
+ apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n"
+ "calibrating APIC timer ...\n");
+
if (calibrate_APIC_clock()) {
/* No broadcast on UP ! */
if (num_possible_cpus() > 1)
printk(KERN_WARNING "APIC timer registered as dummy,"
" due to nmi_watchdog=%d!\n", nmi_watchdog);
+ /* Setup the lapic or request the broadcast */
setup_APIC_timer();
}
/*
* the NMI deadlock-detector uses this.
*/
+#ifdef CONFIG_X86_64
add_pda(apic_timer_irqs, 1);
+#else
+ per_cpu(irq_stat, cpu).apic_timer_irqs++;
+#endif
evt->event_handler(evt);
}
irq_enter();
local_apic_timer_interrupt();
irq_exit();
+
set_irq_regs(old_regs);
}
apic_write(APIC_LVTPC, v | APIC_LVT_MASKED);
}
+ /* lets not touch this if we didn't frob it */
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL)
+ if (maxlvt >= 5) {
+ v = apic_read(APIC_LVTTHMR);
+ apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED);
+ }
+#endif
/*
* Clean APIC state for other OSs:
*/
apic_write(APIC_LVTERR, APIC_LVT_MASKED);
if (maxlvt >= 4)
apic_write(APIC_LVTPC, APIC_LVT_MASKED);
- apic_write(APIC_ESR, 0);
- apic_read(APIC_ESR);
+
+ /* Integrated APIC (!82489DX) ? */
+ if (lapic_is_integrated()) {
+ if (maxlvt > 3)
+ /* Clear ESR due to Pentium errata 3AP and 11AP */
+ apic_write(APIC_ESR, 0);
+ apic_read(APIC_ESR);
+ }
}
/**
value = apic_read(APIC_SPIV);
value &= ~APIC_SPIV_APIC_ENABLED;
apic_write(APIC_SPIV, value);
+
+#ifdef CONFIG_X86_32
+ /*
+ * When LAPIC was disabled by the BIOS and enabled by the kernel,
+ * restore the disabled state.
+ */
+ if (enabled_via_apicbase) {
+ unsigned int l, h;
+
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ l &= ~MSR_IA32_APICBASE_ENABLE;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ }
+#endif
}
+/*
+ * If Linux enabled the LAPIC against the BIOS default disable it down before
+ * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and
+ * not power-off. Additionally clear all LVT entries before disable_local_APIC
+ * for the case where Linux didn't enable the LAPIC.
+ */
void lapic_shutdown(void)
{
unsigned long flags;
local_irq_save(flags);
- disable_local_APIC();
+#ifdef CONFIG_X86_32
+ if (!enabled_via_apicbase)
+ clear_local_APIC();
+ else
+#endif
+ disable_local_APIC();
+
local_irq_restore(flags);
}
/*
* The ID register is read/write in a real APIC.
*/
- reg0 = read_apic_id();
+ reg0 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0);
apic_write(APIC_ID, reg0 ^ APIC_ID_MASK);
- reg1 = read_apic_id();
+ reg1 = apic_read(APIC_ID);
apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1);
apic_write(APIC_ID, reg0);
if (reg1 != (reg0 ^ APIC_ID_MASK))
*/
void __init sync_Arb_IDs(void)
{
- /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */
- if (modern_apic())
+ /*
+ * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not
+ * needed on AMD.
+ */
+ if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD)
return;
/*
apic_wait_icr_idle();
apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n");
- apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG
- | APIC_DM_INIT);
+ apic_write(APIC_ICR, APIC_DEST_ALLINC |
+ APIC_INT_LEVELTRIG | APIC_DM_INIT);
}
/*
if (smp_found_config || !cpu_has_apic)
return;
- value = apic_read(APIC_LVR);
-
/*
* Do not trust the local APIC being empty at bootup.
*/
value = apic_read(APIC_SPIV);
value &= ~APIC_VECTOR_MASK;
value |= APIC_SPIV_APIC_ENABLED;
- value |= APIC_SPIV_FOCUS_DISABLED;
+
+#ifdef CONFIG_X86_32
+ /* This bit is reserved on P4/Xeon and should be cleared */
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) &&
+ (boot_cpu_data.x86 == 15))
+ value &= ~APIC_SPIV_FOCUS_DISABLED;
+ else
+#endif
+ value |= APIC_SPIV_FOCUS_DISABLED;
value |= SPURIOUS_APIC_VECTOR;
apic_write(APIC_SPIV, value);
*/
apic_write(APIC_LVT0, APIC_DM_EXTINT);
value = APIC_DM_NMI;
+ if (!lapic_is_integrated()) /* 82489DX */
+ value |= APIC_LVT_LEVEL_TRIGGER;
apic_write(APIC_LVT1, value);
}
+static void __cpuinit lapic_setup_esr(void)
+{
+ unsigned long oldvalue, value, maxlvt;
+ if (lapic_is_integrated() && !esr_disable) {
+ if (esr_disable) {
+ /*
+ * Something untraceable is creating bad interrupts on
+ * secondary quads ... for the moment, just leave the
+ * ESR disabled - we can't do anything useful with the
+ * errors anyway - mbligh
+ */
+ printk(KERN_INFO "Leaving ESR disabled.\n");
+ return;
+ }
+ /* !82489DX */
+ maxlvt = lapic_get_maxlvt();
+ if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */
+ apic_write(APIC_ESR, 0);
+ oldvalue = apic_read(APIC_ESR);
+
+ /* enables sending errors */
+ value = ERROR_APIC_VECTOR;
+ apic_write(APIC_LVTERR, value);
+ /*
+ * spec says clear errors after enabling vector.
+ */
+ if (maxlvt > 3)
+ apic_write(APIC_ESR, 0);
+ value = apic_read(APIC_ESR);
+ if (value != oldvalue)
+ apic_printk(APIC_VERBOSE, "ESR value before enabling "
+ "vector: 0x%08lx after: 0x%08lx\n",
+ oldvalue, value);
+ } else {
+ printk(KERN_INFO "No ESR for 82489DX.\n");
+ }
+}
+
+
/**
* setup_local_APIC - setup the local APIC
*/
preempt_enable();
}
-static void __cpuinit lapic_setup_esr(void)
-{
- unsigned maxlvt = lapic_get_maxlvt();
-
- apic_write(APIC_LVTERR, ERROR_APIC_VECTOR);
- /*
- * spec says clear errors after enabling vector.
- */
- if (maxlvt > 3)
- apic_write(APIC_ESR, 0);
-}
-
void __cpuinit end_local_APIC_setup(void)
{
lapic_setup_esr();
+
+#ifdef CONFIG_X86_32
+ {
+ unsigned int value;
+ /* Disable the local apic timer */
+ value = apic_read(APIC_LVTT);
+ value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR);
+ apic_write(APIC_LVTT, value);
+ }
+#endif
+
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
}
+void check_x2apic(void)
+{
+ int msr, msr2;
+
+ rdmsr(MSR_IA32_APICBASE, msr, msr2);
+
+ if (msr & X2APIC_ENABLE) {
+ printk("x2apic enabled by BIOS, switching to x2apic ops\n");
+ x2apic_preenabled = x2apic = 1;
+ apic_ops = &x2apic_ops;
+ }
+}
+
+void enable_x2apic(void)
+{
+ int msr, msr2;
+
+ rdmsr(MSR_IA32_APICBASE, msr, msr2);
+ if (!(msr & X2APIC_ENABLE)) {
+ printk("Enabling x2apic\n");
+ wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
+ }
+}
+
+void enable_IR_x2apic(void)
+{
+#ifdef CONFIG_INTR_REMAP
+ int ret;
+ unsigned long flags;
+
+ if (!cpu_has_x2apic)
+ return;
+
+ if (!x2apic_preenabled && disable_x2apic) {
+ printk(KERN_INFO
+ "Skipped enabling x2apic and Interrupt-remapping "
+ "because of nox2apic\n");
+ return;
+ }
+
+ if (x2apic_preenabled && disable_x2apic)
+ panic("Bios already enabled x2apic, can't enforce nox2apic");
+
+ if (!x2apic_preenabled && skip_ioapic_setup) {
+ printk(KERN_INFO
+ "Skipped enabling x2apic and Interrupt-remapping "
+ "because of skipping io-apic setup\n");
+ return;
+ }
+
+ ret = dmar_table_init();
+ if (ret) {
+ printk(KERN_INFO
+ "dmar_table_init() failed with %d:\n", ret);
+
+ if (x2apic_preenabled)
+ panic("x2apic enabled by bios. But IR enabling failed");
+ else
+ printk(KERN_INFO
+ "Not enabling x2apic,Intr-remapping\n");
+ return;
+ }
+
+ local_irq_save(flags);
+ mask_8259A();
+ save_mask_IO_APIC_setup();
+
+ ret = enable_intr_remapping(1);
+
+ if (ret && x2apic_preenabled) {
+ local_irq_restore(flags);
+ panic("x2apic enabled by bios. But IR enabling failed");
+ }
+
+ if (ret)
+ goto end;
+
+ if (!x2apic) {
+ x2apic = 1;
+ apic_ops = &x2apic_ops;
+ enable_x2apic();
+ }
+end:
+ if (ret)
+ /*
+ * IR enabling failed
+ */
+ restore_IO_APIC_setup();
+ else
+ reinit_intr_remapped_IO_APIC(x2apic_preenabled);
+
+ unmask_8259A();
+ local_irq_restore(flags);
+
+ if (!ret) {
+ if (!x2apic_preenabled)
+ printk(KERN_INFO
+ "Enabled x2apic and interrupt-remapping\n");
+ else
+ printk(KERN_INFO
+ "Enabled Interrupt-remapping\n");
+ } else
+ printk(KERN_ERR
+ "Failed to enable Interrupt-remapping and x2apic\n");
+#else
+ if (!cpu_has_x2apic)
+ return;
+
+ if (x2apic_preenabled)
+ panic("x2apic enabled prior OS handover,"
+ " enable CONFIG_INTR_REMAP");
+
+ printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping "
+ " and x2apic\n");
+#endif
+
+ return;
+}
+
/*
* Detect and enable local APICs on non-SMP boards.
* Original code written by Keir Fraser.
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+ boot_cpu_physical_apicid = read_apic_id();
}
/**
*/
void __init init_apic_mappings(void)
{
+ if (x2apic) {
+ boot_cpu_physical_apicid = read_apic_id();
+ return;
+ }
+
/*
* If no local APIC can be found then set up a fake all
* zeroes page to simulate the local APIC and another
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+ boot_cpu_physical_apicid = read_apic_id();
}
/*
* This initializes the IO-APIC and APIC hardware if this is
* a UP kernel.
*/
+int apic_version[MAX_APICS];
+
int __init APIC_init_uniprocessor(void)
{
if (disable_apic) {
return -1;
}
+ enable_IR_x2apic();
+ setup_apic_routing();
+
verify_local_APIC();
connect_bsp_APIC();
}
/**
- * * connect_bsp_APIC - attach the APIC to the interrupt system
- * */
+ * connect_bsp_APIC - attach the APIC to the interrupt system
+ */
void __init connect_bsp_APIC(void)
{
+#ifdef CONFIG_X86_32
+ if (pic_mode) {
+ /*
+ * Do not trust the local APIC being empty at bootup.
+ */
+ clear_local_APIC();
+ /*
+ * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's
+ * local APIC to INT and NMI lines.
+ */
+ apic_printk(APIC_VERBOSE, "leaving PIC mode, "
+ "enabling APIC mode.\n");
+ outb(0x70, 0x22);
+ outb(0x01, 0x23);
+ }
+#endif
enable_apic_mode();
}
+/**
+ * disconnect_bsp_APIC - detach the APIC from the interrupt system
+ * @virt_wire_setup: indicates, whether virtual wire mode is selected
+ *
+ * Virtual wire mode is necessary to deliver legacy interrupts even when the
+ * APIC is disabled.
+ */
void disconnect_bsp_APIC(int virt_wire_setup)
{
+ unsigned int value;
+
+#ifdef CONFIG_X86_32
+ if (pic_mode) {
+ /*
+ * Put the board back into PIC mode (has an effect only on
+ * certain older boards). Note that APIC interrupts, including
+ * IPIs, won't work beyond this point! The only exception are
+ * INIT IPIs.
+ */
+ apic_printk(APIC_VERBOSE, "disabling APIC mode, "
+ "entering PIC mode.\n");
+ outb(0x70, 0x22);
+ outb(0x00, 0x23);
+ return;
+ }
+#endif
+
/* Go back to Virtual Wire compatibility mode */
- unsigned long value;
/* For the spurious interrupt use vector F, and enable it */
value = apic_read(APIC_SPIV);
apic_write(APIC_LVT0, APIC_LVT_MASKED);
}
- /* For LVT1 make it edge triggered, active high, nmi and enabled */
+ /*
+ * For LVT1 make it edge triggered, active high,
+ * nmi and enabled
+ */
value = apic_read(APIC_LVT1);
value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING |
APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR |
int cpu;
cpumask_t tmp_map;
+ /*
+ * Validate version
+ */
+ if (version == 0x0) {
+ printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+ "fixing up to 0x10. (tell your hw vendor)\n",
+ version);
+ version = 0x10;
+ }
+ apic_version[apicid] = version;
+
if (num_processors >= NR_CPUS) {
printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
- " Processor ignored.\n", NR_CPUS);
+ " Processor ignored.\n", NR_CPUS);
return;
}
if (apicid > max_physical_apicid)
max_physical_apicid = apicid;
+#ifdef CONFIG_X86_32
+ /*
+ * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+ * but we need to work other dependencies like SMP_SUSPEND etc
+ * before this can be done without some confusion.
+ * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+ * - Ashok Raj <ashok.raj@intel.com>
+ */
+ if (max_physical_apicid >= 8) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (!APIC_XAPIC(version)) {
+ def_to_bigsmp = 0;
+ break;
+ }
+ /* If P4 and above fall through */
+ case X86_VENDOR_AMD:
+ def_to_bigsmp = 1;
+ }
+ }
+#endif
+
+#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64)
/* are we being called early in kernel startup? */
if (early_per_cpu_ptr(x86_cpu_to_apicid)) {
u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid);
per_cpu(x86_cpu_to_apicid, cpu) = apicid;
per_cpu(x86_bios_cpu_apicid, cpu) = apicid;
}
+#endif
cpu_set(cpu, cpu_possible_map);
cpu_set(cpu, cpu_present_map);
}
+int hard_smp_processor_id(void)
+{
+ return read_apic_id();
+}
+
/*
* Power management
*/
#ifdef CONFIG_PM
static struct {
- /* 'active' is true if the local APIC was enabled by us and
- not the BIOS; this signifies that we are also responsible
- for disabling it before entering apm/acpi suspend */
+ /*
+ * 'active' is true if the local APIC was enabled by us and
+ * not the BIOS; this signifies that we are also responsible
+ * for disabling it before entering apm/acpi suspend
+ */
int active;
/* r/w apic fields */
unsigned int apic_id;
maxlvt = lapic_get_maxlvt();
- apic_pm_state.apic_id = read_apic_id();
+ apic_pm_state.apic_id = apic_read(APIC_ID);
apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI);
apic_pm_state.apic_ldr = apic_read(APIC_LDR);
apic_pm_state.apic_dfr = apic_read(APIC_DFR);
apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR);
apic_pm_state.apic_tmict = apic_read(APIC_TMICT);
apic_pm_state.apic_tdcr = apic_read(APIC_TDCR);
-#ifdef CONFIG_X86_MCE_INTEL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR);
#endif
+
local_irq_save(flags);
disable_local_APIC();
local_irq_restore(flags);
maxlvt = lapic_get_maxlvt();
local_irq_save(flags);
- rdmsr(MSR_IA32_APICBASE, l, h);
- l &= ~MSR_IA32_APICBASE_BASE;
- l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
- wrmsr(MSR_IA32_APICBASE, l, h);
+
+#ifdef CONFIG_X86_64
+ if (x2apic)
+ enable_x2apic();
+ else
+#endif
+ {
+ /*
+ * Make sure the APICBASE points to the right address
+ *
+ * FIXME! This will be wrong if we ever support suspend on
+ * SMP! We'll need to do this as part of the CPU restore!
+ */
+ rdmsr(MSR_IA32_APICBASE, l, h);
+ l &= ~MSR_IA32_APICBASE_BASE;
+ l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr;
+ wrmsr(MSR_IA32_APICBASE, l, h);
+ }
+
apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED);
apic_write(APIC_ID, apic_pm_state.apic_id);
apic_write(APIC_DFR, apic_pm_state.apic_dfr);
apic_write(APIC_SPIV, apic_pm_state.apic_spiv);
apic_write(APIC_LVT0, apic_pm_state.apic_lvt0);
apic_write(APIC_LVT1, apic_pm_state.apic_lvt1);
-#ifdef CONFIG_X86_MCE_INTEL
+#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL)
if (maxlvt >= 5)
apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr);
#endif
apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr);
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
+
local_irq_restore(flags);
+
return 0;
}
+/*
+ * This device has no shutdown method - fully functioning local APICs
+ * are needed on every CPU up until machine_halt/restart/poweroff.
+ */
+
static struct sysdev_class lapic_sysclass = {
.name = "lapic",
.resume = lapic_resume,
return (clusters > 2);
}
-/*
- * APIC command line parameters
- */
-static int __init apic_set_verbosity(char *str)
+static __init int setup_nox2apic(char *str)
{
- if (str == NULL) {
- skip_ioapic_setup = 0;
- ioapic_force = 1;
- return 0;
- }
- if (strcmp("debug", str) == 0)
- apic_verbosity = APIC_DEBUG;
- else if (strcmp("verbose", str) == 0)
- apic_verbosity = APIC_VERBOSE;
- else {
- printk(KERN_WARNING "APIC Verbosity level %s not recognised"
- " use apic=verbose or apic=debug\n", str);
- return -EINVAL;
- }
-
+ disable_x2apic = 1;
+ clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC);
return 0;
}
-early_param("apic", apic_set_verbosity);
+early_param("nox2apic", setup_nox2apic);
+
-static __init int setup_disableapic(char *str)
+/*
+ * APIC command line parameters
+ */
+static int __init setup_disableapic(char *arg)
{
disable_apic = 1;
setup_clear_cpu_cap(X86_FEATURE_APIC);
early_param("disableapic", setup_disableapic);
/* same as disableapic, for compatibility */
-static __init int setup_nolapic(char *str)
+static int __init setup_nolapic(char *arg)
{
- return setup_disableapic(str);
+ return setup_disableapic(arg);
}
early_param("nolapic", setup_nolapic);
}
early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok);
-static __init int setup_noapictimer(char *str)
+static int __init parse_disable_apic_timer(char *arg)
{
- if (str[0] != ' ' && str[0] != 0)
- return 0;
disable_apic_timer = 1;
- return 1;
+ return 0;
}
-__setup("noapictimer", setup_noapictimer);
+early_param("noapictimer", parse_disable_apic_timer);
+
+static int __init parse_nolapic_timer(char *arg)
+{
+ disable_apic_timer = 1;
+ return 0;
+}
+early_param("nolapic_timer", parse_nolapic_timer);
static __init int setup_apicpmtimer(char *s)
{
}
__setup("apicpmtimer", setup_apicpmtimer);
+static int __init apic_set_verbosity(char *arg)
+{
+ if (!arg) {
+#ifdef CONFIG_X86_64
+ skip_ioapic_setup = 0;
+ ioapic_force = 1;
+ return 0;
+#endif
+ return -EINVAL;
+ }
+
+ if (strcmp("debug", arg) == 0)
+ apic_verbosity = APIC_DEBUG;
+ else if (strcmp("verbose", arg) == 0)
+ apic_verbosity = APIC_VERBOSE;
+ else {
+ printk(KERN_WARNING "APIC Verbosity level %s not recognised"
+ " use apic=verbose or apic=debug\n", arg);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+early_param("apic", apic_set_verbosity);
+
static int __init lapic_insert_resource(void)
{
if (!apic_phys)
projects / karo-tx-linux.git / blobdiff