#include <i2c.h>
#include <asm/byteorder.h>
+#define CONFIG_STRESS /* enable 667 MHz CPU freq selection */
+#define DEBUG
+
static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
uchar chip;
char pcixClock[4];
if (argc < 3) {
- printf ("Usage:\n%s\n", cmdtp->usage);
+ cmd_usage(cmdtp);
return 1;
}
else
chip = IIC0_ALT_BOOTPROM_ADDR;
- do {
- printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n");
- nbytes = readline (" ? ");
-
- if (strcmp(console_buffer, "quit") == 0)
- return 0;
-
- if ((strcmp(console_buffer, "33") != 0) &
- (strcmp(console_buffer, "66") != 0))
- nbytes=0;
-
- strcpy(sysClock, console_buffer);
-
- } while (nbytes == 0);
+ /* on Katmai SysClk is always 33MHz */
+ strcpy(sysClock, "33");
do {
- if (strcmp(sysClock, "66") == 0) {
- printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n");
- } else {
#ifdef CONFIG_STRESS
- printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+ printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
#else
- printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+ printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
#endif
- }
nbytes = readline (" ? ");
if (strcmp(console_buffer, "quit") == 0)
return 0;
- if (strcmp(sysClock, "66") == 0) {
- if ((strcmp(console_buffer, "400") != 0) &
- (strcmp(console_buffer, "533") != 0)
-#ifdef CONFIG_STRESS
- & (strcmp(console_buffer, "667") != 0)
-#endif
- ) {
- nbytes = 0;
- }
- } else {
- if ((strcmp(console_buffer, "400") != 0) &
- (strcmp(console_buffer, "500") != 0) &
- (strcmp(console_buffer, "533") != 0)
+ if ((strcmp(console_buffer, "400") != 0) &&
+ (strcmp(console_buffer, "500") != 0) &&
+ (strcmp(console_buffer, "533") != 0)
#ifdef CONFIG_STRESS
- & (strcmp(console_buffer, "667") != 0)
+ && (strcmp(console_buffer, "667") != 0)
#endif
- ) {
- nbytes = 0;
- }
+ ) {
+ nbytes = 0;
}
strcpy(cpuClock, console_buffer);
else {
do {
if (strcmp(cpuClock, "400") == 0)
- printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+ printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
#ifdef CONFIG_STRESS
if (strcmp(cpuClock, "667") == 0)
- printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+ printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
#endif
nbytes = readline (" ? ");
return 0;
if (strcmp(cpuClock, "400") == 0) {
- if ((strcmp(console_buffer, "100") != 0) &
+ if ((strcmp(console_buffer, "100") != 0) &&
(strcmp(console_buffer, "133") != 0))
nbytes = 0;
}
#ifdef CONFIG_STRESS
if (strcmp(cpuClock, "667") == 0) {
- if ((strcmp(console_buffer, "133") != 0) &
+ if ((strcmp(console_buffer, "133") != 0) &&
(strcmp(console_buffer, "166") != 0))
nbytes = 0;
}
}
do {
- printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+ printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
nbytes = readline (" ? ");
if (strcmp(console_buffer, "quit") == 0)
return 0;
- if ((strcmp(console_buffer, "33") != 0) &
- (strcmp(console_buffer, "66") != 0) &
- (strcmp(console_buffer, "100") != 0) &
+ if ((strcmp(console_buffer, "33") != 0) &&
+ (strcmp(console_buffer, "66") != 0) &&
+ (strcmp(console_buffer, "100") != 0) &&
(strcmp(console_buffer, "133") != 0)) {
nbytes = 0;
}
} while (nbytes == 0);
- printf("\nsys clk = %sMhz\n", sysClock);
- printf("cpu clk = %sMhz\n", cpuClock);
- printf("plb clk = %sMhz\n", plbClock);
- printf("Pci-X clk = %sMhz\n", pcixClock);
+ printf("\nsys clk = %s MHz\n", sysClock);
+ printf("cpu clk = %s MHz\n", cpuClock);
+ printf("plb clk = %s MHz\n", plbClock);
+ printf("Pci-X clk = %s MHz\n", pcixClock);
do {
printf("\npress [y] to write I2C bootstrap \n");
} while (nbytes == 0);
if (strcmp(sysClock, "33") == 0) {
- if ((strcmp(cpuClock, "400") == 0) &
+ if ((strcmp(cpuClock, "400") == 0) &&
(strcmp(plbClock, "100") == 0))
data = 0x8678c206;
- if ((strcmp(cpuClock, "400") == 0) &
+ if ((strcmp(cpuClock, "400") == 0) &&
(strcmp(plbClock, "133") == 0))
data = 0x8678c2c6;
if ((strcmp(cpuClock, "533") == 0))
data = 0x87790252;
-
#ifdef CONFIG_STRESS
- if ((strcmp(cpuClock, "667") == 0) &
+ if ((strcmp(cpuClock, "667") == 0) &&
(strcmp(plbClock, "133") == 0))
data = 0x87794256;
- if ((strcmp(cpuClock, "667") == 0) &
+ if ((strcmp(cpuClock, "667") == 0) &&
(strcmp(plbClock, "166") == 0))
data = 0x87794206;
-
-#endif
- }
- if (strcmp(sysClock, "66") == 0) {
- if ((strcmp(cpuClock, "400") == 0) &
- (strcmp(plbClock, "100") == 0))
- data = 0x84706206;
-
- if ((strcmp(cpuClock, "400") == 0) &
- (strcmp(plbClock, "133") == 0))
- data = 0x847062c6;
-
- if ((strcmp(cpuClock, "533") == 0))
- data = 0x85708206;
-
-#ifdef CONFIG_STRESS
- if ((strcmp(cpuClock, "667") == 0) &
- (strcmp(plbClock, "133") == 0))
- data = 0x8570a256;
-
- if ((strcmp(cpuClock, "667") == 0) &
- (strcmp(plbClock, "166") == 0))
- data = 0x8570a206;
-
#endif
}
-
#ifdef DEBUG
- printf(" pin strap0 to write in i2c = %x\n", data);
+ printf(" pin strap0 to write in i2c = %lx\n", data);
#endif /* DEBUG */
if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0)
printf("Error writing strap0 in %s\n", argv[2]);
if (strcmp(pcixClock, "33") == 0)
- data = 0x00000701;
+ data = 0x000007E1;
if (strcmp(pcixClock, "66") == 0)
- data = 0x00000601;
+ data = 0x000006E1;
if (strcmp(pcixClock, "100") == 0)
- data = 0x00000501;
+ data = 0x000005E1;
if (strcmp(pcixClock, "133") == 0)
- data = 0x00000401;
+ data = 0x000004E1;
if (strcmp(plbClock, "166") == 0)
- data |= 0x05950000;
+/* data |= 0x05950000; */ /* this set's DDR2 clock == PLB clock */
+ data |= 0x05A50000; /* this set's DDR2 clock == 2 * PLB clock */
else
data |= 0x05A50000;
#ifdef DEBUG
- printf(" pin strap1 to write in i2c = %x\n", data);
+ printf(" pin strap1 to write in i2c = %lx\n", data);
#endif /* DEBUG */
udelay(1000);
U_BOOT_CMD(
bootstrap, 3, 1, do_bootstrap,
- "bootstrap - program the serial device strap\n",
+ "program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n"
);
projects / karo-tx-uboot.git / blobdiff