Add TQ Systems TQMa6 board support

[karo-tx-uboot.git] / board / bc3450 / bc3450.c

diff --git a/board/bc3450/bc3450.c b/board/bc3450/bc3450.c
index 6fb0096bede97a7e4f70885c7c09a86d2649b175..a5c6d750cb2450c00fd5e5f6264f13ced22655d3 100644 (file)
--- a/board/bc3450/bc3450.c
+++ b/board/bc3450/bc3450.c
@@ -11,23 +11,7 @@
  * (C) Copyright 2006
  * Stefan Strobl, GERSYS GmbH, stefan.strobl@gersys.de
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -104,7 +88,6 @@ static void sdram_start (int hi_addr)
  *           is something else than 0x00000000.
  */
 
-#if defined(CONFIG_MPC5200)
 phys_size_t initdram (int board_type)
 {
        ulong dramsize = 0;
@@ -204,57 +187,6 @@ phys_size_t initdram (int board_type)
        return dramsize;
 }
 
-#elif defined(CONFIG_MGT5100)
-
-phys_size_t initdram (int board_type)
-{
-       ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
-       ulong test1, test2;
-
-       /* setup and enable SDRAM chip selects */
-       *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
-       *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;    /* 2G           */
-       *(vu_long *)MPC5XXX_ADDECR |= (1 << 22);        /* Enable SDRAM */
-       __asm__ volatile ("sync");
-
-       /* setup config registers */
-       *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-       *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
-       /* address select register */
-       *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL;
-       __asm__ volatile ("sync");
-
-       /* find RAM size */
-       sdram_start(0);
-       test1 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-       sdram_start(1);
-       test2 = get_ram_size((ulong *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-       if (test1 > test2) {
-               sdram_start(0);
-               dramsize = test1;
-       } else {
-               dramsize = test2;
-       }
-
-       /* set SDRAM end address according to size */
-       *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
-
-#else /* CONFIG_SYS_RAMBOOT */
-
-       /* Retrieve amount of SDRAM available */
-       dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-       return dramsize;
-}
-
-#else
-#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
-#endif
-
 int checkboard (void)
 {
 #if defined (CONFIG_TQM5200)
@@ -276,10 +208,6 @@ void flash_preinit(void)
         * Note that CS_BOOT cannot be cleared when
         * executing in flash.
         */
-#if defined(CONFIG_MGT5100)
-       *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25);       /* disable CS_BOOT */
-       *(vu_long *)MPC5XXX_ADDECR |= (1 << 16);        /* enable CS0      */
-#endif
        *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1;         /* clear RO        */
 }
 
@@ -346,26 +274,6 @@ int post_hotkeys_pressed(void)
 }
 #endif
 
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-void post_word_store (ulong a)
-{
-       volatile ulong *save_addr =
-               (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
-       *save_addr = a;
-}
-
-ulong post_word_load (void)
-{
-       volatile ulong *save_addr =
-               (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE);
-
-       return *save_addr;
-}
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
-
-
 #ifdef CONFIG_BOARD_EARLY_INIT_R
 int board_early_init_r (void)
 {