* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <config.h>
#include <command.h>
#include <asm/blackfin.h>
-#include <asm/net.h>
#include <net.h>
#include <asm/mach-common/bits/bootrom.h>
#include <netdev.h>
DECLARE_GLOBAL_DATA_PTR;
-#define POST_WORD_ADDR 0xFF903FFC
-
int checkboard(void)
{
printf("Board: ADI BF537 stamp board\n");
return 0;
}
-#if defined(CONFIG_BFIN_IDE)
-
-void cf_outb(unsigned char val, volatile unsigned char *addr)
-{
- *(addr) = val;
- SSYNC();
-}
-
-unsigned char cf_inb(volatile unsigned char *addr)
-{
- volatile unsigned char c;
-
- c = *(addr);
- SSYNC();
-
- return c;
-}
-
-void cf_insw(unsigned short *sect_buf, unsigned short *addr, int words)
-{
- int i;
-
- for (i = 0; i < words; i++)
- *(sect_buf + i) = *(addr);
- SSYNC();
-}
-
-void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
-{
- int i;
-
- for (i = 0; i < words; i++)
- *(addr) = *(sect_buf + i);
- SSYNC();
-}
-#endif /* CONFIG_BFIN_IDE */
-
-phys_size_t initdram(int board_type)
-{
- gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
- gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE;
- return gd->bd->bi_memsize;
-}
-
-void board_reset(void)
-{
- /* workaround for weak pull ups on ssel */
- if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) {
- bfin_write_PORTF_FER(bfin_read_PORTF_FER() & ~PF10);
- bfin_write_PORTFIO_SET(PF10);
- udelay(1);
- }
-}
-
#ifdef CONFIG_BFIN_MAC
static void board_init_enetaddr(uchar *mac_addr)
{
-#ifdef CONFIG_SYS_NO_FLASH
-# define USE_MAC_IN_FLASH 0
-#else
-# define USE_MAC_IN_FLASH 1
-#endif
- bool valid_mac = false;
-
- if (USE_MAC_IN_FLASH) {
- /* we cram the MAC in the last flash sector */
- uchar *board_mac_addr = (uchar *)0x203F0000;
- if (is_valid_ether_addr(board_mac_addr)) {
- memcpy(mac_addr, board_mac_addr, 6);
- valid_mac = true;
- }
- }
-
- if (!valid_mac) {
- puts("Warning: Generating 'random' MAC address\n");
- bfin_gen_rand_mac(mac_addr);
+#ifndef CONFIG_SYS_NO_FLASH
+ /* we cram the MAC in the last flash sector */
+ uchar *board_mac_addr = (uchar *)0x203F0000;
+ if (is_valid_ethaddr(board_mac_addr)) {
+ memcpy(mac_addr, board_mac_addr, 6);
+ eth_setenv_enetaddr("ethaddr", mac_addr);
}
-
- eth_setenv_enetaddr("ethaddr", mac_addr);
+#endif
}
int board_eth_init(bd_t *bis)
}
#endif
-#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
int misc_init_r(void)
{
flash_protect(FLAG_PROTECT_SET, 0x203F0000, 0x203FFFFF, &flash_info[0]);
#endif
-#if defined(CONFIG_BFIN_IDE)
-#if defined(CONFIG_BFIN_TRUE_IDE)
- /* Enable ATASEL when in True IDE mode */
- printf("Using CF True IDE Mode\n");
- cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_ENA);
- udelay(1000);
-#elif defined(CONFIG_BFIN_CF_IDE)
- /* Disable ATASEL when we're in Common Memory Mode */
- printf("Using CF Common Memory Mode\n");
- cf_outb(0, (unsigned char *)CONFIG_CF_ATASEL_DIS);
- udelay(1000);
-#elif defined(CONFIG_BFIN_HDD_IDE)
- printf("Using HDD IDE Mode\n");
+#ifdef CONFIG_BFIN_IDE
+ cf_ide_init();
#endif
- ide_init();
-#endif /* CONFIG_BFIN_IDE */
- return 0;
-}
-#endif /* CONFIG_MISC_INIT_R */
-
-#ifdef CONFIG_POST
-/* Using sw10-PF5 as the hotkey */
-int post_hotkeys_pressed(void)
-{
- int delay = 3;
- int i;
- unsigned short value;
-
- *pPORTF_FER &= ~PF5;
- *pPORTFIO_DIR &= ~PF5;
- *pPORTFIO_INEN |= PF5;
- printf("########Press SW10 to enter Memory POST########: %2d ", delay);
- while (delay--) {
- for (i = 0; i < 100; i++) {
- value = *pPORTFIO & PF5;
- if (value != 0) {
- break;
- }
- udelay(10000);
- }
- printf("\b\b\b%2d ", delay);
- }
- printf("\b\b\b 0");
- printf("\n");
- if (value == 0)
- return 0;
- else {
- printf("Hotkey has been pressed, Enter POST . . . . . .\n");
- return 1;
- }
-}
-#endif
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-void post_word_store(ulong a)
-{
- volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
- *save_addr = a;
-}
-
-ulong post_word_load(void)
-{
- volatile ulong *save_addr = (volatile ulong *)POST_WORD_ADDR;
- return *save_addr;
-}
-#endif
-
-#ifdef CONFIG_POST
-int uart_post_test(int flags)
-{
return 0;
}
-
-#define BLOCK_SIZE 0x10000
-#define VERIFY_ADDR 0x2000000
-extern int erase_block_flash(int);
-extern int write_data(long lStart, long lCount, uchar * pnData);
-int flash_post_test(int flags)
-{
- unsigned short *pbuf, *temp;
- int offset, n, i;
- int value = 0;
- int result = 0;
- printf("\n");
- pbuf = (unsigned short *)VERIFY_ADDR;
- temp = pbuf;
- for (n = FLASH_START_POST_BLOCK; n < FLASH_END_POST_BLOCK; n++) {
- offset = (n - 7) * BLOCK_SIZE;
- printf("--------Erase block:%2d..", n);
- erase_block_flash(n);
- printf("OK\r");
- printf("--------Program block:%2d...", n);
- write_data(CONFIG_SYS_FLASH_BASE + offset, BLOCK_SIZE, pbuf);
- printf("OK\r");
- printf("--------Verify block:%2d...", n);
- for (i = 0; i < BLOCK_SIZE; i += 2) {
- if (*(unsigned short *)(CONFIG_SYS_FLASH_BASE + offset + i) !=
- *temp++) {
- value = 1;
- result = 1;
- }
- }
- if (value)
- printf("failed\n");
- else
- printf("OK %3d%%\r",
- (int)(
- (n + 1 -
- FLASH_START_POST_BLOCK) *
- 100 / (FLASH_END_POST_BLOCK -
- FLASH_START_POST_BLOCK)));
-
- temp = pbuf;
- value = 0;
- }
- printf("\n");
- if (result)
- return -1;
- else
- return 0;
-}
-
-/****************************************************
- * LED1 ---- PF6 LED2 ---- PF7 *
- * LED3 ---- PF8 LED4 ---- PF9 *
- * LED5 ---- PF10 LED6 ---- PF11 *
- ****************************************************/
-int led_post_test(int flags)
-{
- *pPORTF_FER &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
- *pPORTFIO_DIR |= PF6 | PF7 | PF8 | PF9 | PF10 | PF11;
- *pPORTFIO_INEN &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
- *pPORTFIO &= ~(PF6 | PF7 | PF8 | PF9 | PF10 | PF11);
- udelay(1000000);
- printf("LED1 on");
- *pPORTFIO |= PF6;
- udelay(1000000);
- printf("\b\b\b\b\b\b\b");
- printf("LED2 on");
- *pPORTFIO |= PF7;
- udelay(1000000);
- printf("\b\b\b\b\b\b\b");
- printf("LED3 on");
- *pPORTFIO |= PF8;
- udelay(1000000);
- printf("\b\b\b\b\b\b\b");
- printf("LED4 on");
- *pPORTFIO |= PF9;
- udelay(1000000);
- printf("\b\b\b\b\b\b\b");
- printf("LED5 on");
- *pPORTFIO |= PF10;
- udelay(1000000);
- printf("\b\b\b\b\b\b\b");
- printf("lED6 on");
- *pPORTFIO |= PF11;
- printf("\b\b\b\b\b\b\b ");
- return 0;
-}
-
-/************************************************
- * SW10 ---- PF5 SW11 ---- PF4 *
- * SW12 ---- PF3 SW13 ---- PF2 *
- ************************************************/
-int button_post_test(int flags)
-{
- int i, delay = 5;
- unsigned short value = 0;
- int result = 0;
-
- *pPORTF_FER &= ~(PF5 | PF4 | PF3 | PF2);
- *pPORTFIO_DIR &= ~(PF5 | PF4 | PF3 | PF2);
- *pPORTFIO_INEN |= (PF5 | PF4 | PF3 | PF2);
-
- printf("\n--------Press SW10: %2d ", delay);
- while (delay--) {
- for (i = 0; i < 100; i++) {
- value = *pPORTFIO & PF5;
- if (value != 0) {
- break;
- }
- udelay(10000);
- }
- printf("\b\b\b%2d ", delay);
- }
- if (value != 0)
- printf("\b\bOK");
- else {
- result = -1;
- printf("\b\bfailed");
- }
-
- delay = 5;
- printf("\n--------Press SW11: %2d ", delay);
- while (delay--) {
- for (i = 0; i < 100; i++) {
- value = *pPORTFIO & PF4;
- if (value != 0) {
- break;
- }
- udelay(10000);
- }
- printf("\b\b\b%2d ", delay);
- }
- if (value != 0)
- printf("\b\bOK");
- else {
- result = -1;
- printf("\b\bfailed");
- }
-
- delay = 5;
- printf("\n--------Press SW12: %2d ", delay);
- while (delay--) {
- for (i = 0; i < 100; i++) {
- value = *pPORTFIO & PF3;
- if (value != 0) {
- break;
- }
- udelay(10000);
- }
- printf("\b\b\b%2d ", delay);
- }
- if (value != 0)
- printf("\b\bOK");
- else {
- result = -1;
- printf("\b\bfailed");
- }
-
- delay = 5;
- printf("\n--------Press SW13: %2d ", delay);
- while (delay--) {
- for (i = 0; i < 100; i++) {
- value = *pPORTFIO & PF2;
- if (value != 0) {
- break;
- }
- udelay(10000);
- }
- printf("\b\b\b%2d ", delay);
- }
- if (value != 0)
- printf("\b\bOK");
- else {
- result = -1;
- printf("\b\bfailed");
- }
- printf("\n");
- return result;
-}
-#endif
projects / karo-tx-uboot.git / blobdiff