arm: Add missing .vectors section to linker scripts

[karo-tx-uboot.git] / board / cpc45 / pd67290.c

diff --git a/board/cpc45/pd67290.c b/board/cpc45/pd67290.c
index 6ca3e7bd7ab62b69574229aad08de99f8ad73c97..23d87f682586ed0f21d12fa87492d2b7d458c268 100644 (file)
--- a/board/cpc45/pd67290.c
+++ b/board/cpc45/pd67290.c
@@ -2,24 +2,7 @@
  * (C) Copyright 2003-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier:    GPL-2.0+
  ********************************************************************
  *
  * Lots of code copied from:
@@ -225,11 +208,7 @@ static u_int cirrus_set_opts (socket_info_t * s)
 {
        cirrus_state_t *p = &s->c_state;
        u_int mask = 0xffff;
-#if DEBUG
-       char buf[200];
-
-       memset (buf, 0, 200);
-#endif
+       char buf[200] = {0};
 
        if (has_ring == -1)
                has_ring = 1;
@@ -639,7 +618,7 @@ static int i365_set_io_map (socket_info_t * s, struct pccard_io_map *io)
 #define        HOST_TO_PCI(addr)       ((addr) - 0xfe000000)
 #define        PCI_TO_HOST(addr)       ((addr) + 0xfe000000)
 
-int i82365_init (void)
+static int i82365_init (void)
 {
        u_int val;
        int i;
@@ -699,16 +678,16 @@ int i82365_init (void)
        mem.map = 0;
        mem.flags = MAP_ATTRIB | MAP_ACTIVE;
        mem.speed = 300;
-       mem.sys_start = CFG_PCMCIA_MEM_ADDR;
-       mem.sys_stop = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE - 1;
+       mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR;
+       mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE - 1;
        mem.card_start = 0;
        i365_set_mem_map (&socket, &mem);
 
        mem.map = 1;
        mem.flags = MAP_ACTIVE;
        mem.speed = 300;
-       mem.sys_start = CFG_PCMCIA_MEM_ADDR + CFG_PCMCIA_MEM_SIZE;
-       mem.sys_stop = CFG_PCMCIA_MEM_ADDR + (2 * CFG_PCMCIA_MEM_SIZE) - 1;
+       mem.sys_start = CONFIG_SYS_PCMCIA_MEM_ADDR + CONFIG_SYS_PCMCIA_MEM_SIZE;
+       mem.sys_stop = CONFIG_SYS_PCMCIA_MEM_ADDR + (2 * CONFIG_SYS_PCMCIA_MEM_SIZE) - 1;
        mem.card_start = 0;
        i365_set_mem_map (&socket, &mem);
 
@@ -719,7 +698,7 @@ int i82365_init (void)
        return 0;
 }
 
-void i82365_exit (void)
+static void i82365_exit (void)
 {
        io.map = 0;
        io.flags = 0;
@@ -772,7 +751,7 @@ exit:
        return rc;
 }
 
-#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+#if defined(CONFIG_CMD_PCMCIA)
 int pcmcia_off (void)
 {
        printf ("Disable PCMCIA " PCMCIA_SLOT_MSG "\n");
@@ -794,8 +773,8 @@ static void i82365_dump_regions (pci_dev_t dev)
 {
        u_int tmp[2];
        u_int *mem = (void *) socket.cb_phys;
-       u_char *cis = (void *) CFG_PCMCIA_MEM_ADDR;
-       u_char *ide = (void *) (CFG_ATA_BASE_ADDR + CFG_ATA_REG_OFFSET);
+       u_char *cis = (void *) CONFIG_SYS_PCMCIA_MEM_ADDR;
+       u_char *ide = (void *) (CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_REG_OFFSET);
 
        pci_read_config_dword (dev, 0x00, tmp + 0);
        pci_read_config_dword (dev, 0x80, tmp + 1);