/*
* Miscelaneous DaVinci functions.
*
+ * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com>
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
* Copyright (C) 2008 Lyrtech <www.lyrtech.com>
* Copyright (C) 2004 Texas Instruments.
#include <i2c.h>
#include <net.h>
#include <asm/arch/hardware.h>
-
+#include <asm/io.h>
+#include "misc.h"
DECLARE_GLOBAL_DATA_PTR;
+#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
int dram_init(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
return(0);
}
+#else
+int dram_init(void)
+{
+ /* dram_init must store complete ramsize in gd->ram_size */
+ gd->ram_size = get_ram_size(
+ (volatile void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_MAX_RAM_BANK_SIZE);
+ return 0;
+}
+
+void dram_init_banksize(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->bd->bi_dram[0].size = gd->ram_size;
+}
+#endif
#ifdef CONFIG_DRIVER_TI_EMAC
return 0;
}
-/* If there is a MAC address in the environment, and if it is not identical to
- * the MAC address in the EEPROM, then a warning is printed and the MAC address
- * from the environment is used.
- *
+/*
* If there is no MAC address in the environment, then it will be initialized
* (silently) from the value in the EEPROM.
*/
-void dv_configure_mac_address(uint8_t *rom_enetaddr)
+void davinci_sync_env_enetaddr(uint8_t *rom_enetaddr)
{
- int i;
- u_int8_t env_enetaddr[6];
- char *tmp = getenv("ethaddr");
- char *end;
-
- /* Read Ethernet MAC address from the U-Boot environment.
- * If it is not defined, env_enetaddr[] will be cleared. */
- for (i = 0; i < 6; i++) {
- env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0;
- if (tmp)
- tmp = (*end) ? end+1 : end;
- }
-
- /* Check if EEPROM and U-Boot environment MAC addresses match. */
- if (memcmp(env_enetaddr, "\0\0\0\0\0\0", 6) != 0 &&
- memcmp(env_enetaddr, rom_enetaddr, 6) != 0) {
- printf("Warning: MAC addresses don't match:\n");
- printf(" EEPROM MAC address: %pM\n", rom_enetaddr);
- printf(" \"ethaddr\" value: %pM\n", env_enetaddr) ;
- debug("### Using MAC address from environment\n");
- }
- if (!tmp) {
- char ethaddr[20];
+ uint8_t env_enetaddr[6];
+ eth_getenv_enetaddr_by_index(0, env_enetaddr);
+ if (!memcmp(env_enetaddr, "\0\0\0\0\0\0", 6)) {
/* There is no MAC address in the environment, so we initialize
* it from the value in the EEPROM. */
- sprintf(ethaddr, "%pM", rom_enetaddr) ;
- debug("### Setting environment from EEPROM MAC address = \"%s\"\n",
- ethaddr);
- setenv("ethaddr", ethaddr);
+ debug("### Setting environment from EEPROM MAC address = "
+ "\"%pM\"\n",
+ env_enetaddr);
+ eth_setenv_enetaddr("ethaddr", rom_enetaddr);
}
}
#endif /* DAVINCI_EMAC */
+
+/*
+ * Change the setting of a pin multiplexer field.
+ *
+ * Takes an array of pinmux settings similar to:
+ *
+ * struct pinmux_config uart_pins[] = {
+ * { &davinci_syscfg_regs->pinmux[8], 2, 7 },
+ * { &davinci_syscfg_regs->pinmux[9], 2, 0 }
+ * };
+ *
+ * Stepping through the array, each pinmux[n] register has the given value
+ * set in the pin mux field specified.
+ *
+ * The number of pins in the array must be passed (ARRAY_SIZE can provide
+ * this value conveniently).
+ *
+ * Returns 0 if all field numbers and values are in the correct range,
+ * else returns -1.
+ */
+int davinci_configure_pin_mux(const struct pinmux_config *pins,
+ const int n_pins)
+{
+ int i;
+
+ /* check for invalid pinmux values */
+ for (i = 0; i < n_pins; i++) {
+ if (pins[i].field >= PIN_MUX_NUM_FIELDS ||
+ (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0)
+ return -1;
+ }
+
+ /* configure the pinmuxes */
+ for (i = 0; i < n_pins; i++) {
+ const int offset = pins[i].field * PIN_MUX_FIELD_SIZE;
+ const unsigned int value = pins[i].value << offset;
+ const unsigned int mask = PIN_MUX_FIELD_MASK << offset;
+ const dv_reg *mux = pins[i].mux;
+
+ writel(value | (readl(mux) & (~mask)), mux);
+ }
+
+ return 0;
+}
+
+/*
+ * Configure multiple pinmux resources.
+ *
+ * Takes an pinmux_resource array of pinmux_config and pin counts:
+ *
+ * const struct pinmux_resource pinmuxes[] = {
+ * PINMUX_ITEM(uart_pins),
+ * PINMUX_ITEM(i2c_pins),
+ * };
+ *
+ * The number of items in the array must be passed (ARRAY_SIZE can provide
+ * this value conveniently).
+ *
+ * Each item entry is configured in the defined order. If configuration
+ * of any item fails, -1 is returned and none of the following items are
+ * configured. On success, 0 is returned.
+ */
+int davinci_configure_pin_mux_items(const struct pinmux_resource *item,
+ const int n_items)
+{
+ int i;
+
+ for (i = 0; i < n_items; i++) {
+ if (davinci_configure_pin_mux(item[i].pins,
+ item[i].n_pins) != 0)
+ return -1;
+ }
+
+ return 0;
+}