* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
int board_early_init_f(void)
{
/* IO0 clock at 480MHz */
- mx28_set_ioclk(MXC_IOCLK0, 480000);
+ mxs_set_ioclk(MXC_IOCLK0, 480000);
/* IO1 clock at 480MHz */
- mx28_set_ioclk(MXC_IOCLK1, 480000);
+ mxs_set_ioclk(MXC_IOCLK1, 480000);
/* SSP0 clock at 96MHz */
- mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
- /* SSP2 clock at 96MHz */
- mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
+ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);
+ /* SSP2 clock at 160MHz */
+ mxs_set_sspclk(MXC_SSPCLK2, 160000, 0);
#ifdef CONFIG_CMD_USB
mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
+
+ mxs_iomux_setup_pad(MX28_PAD_AUART3_RX__GPIO_3_12 |
+ MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+ gpio_direction_output(MX28_PAD_AUART3_RX__GPIO_3_12, 0);
#endif
return 0;
int dram_init(void)
{
- return mx28_dram_init();
+ return mxs_dram_init();
}
#ifdef CONFIG_CMD_MMC
/* Turn on the power to the card. */
gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
- return mxsmmc_initialize(bis, 0, m28_mmc_wp);
+ return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL);
}
#endif
int board_eth_init(bd_t *bis)
{
- struct mx28_clkctrl_regs *clkctrl_regs =
- (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct mxs_clkctrl_regs *clkctrl_regs =
+ (struct mxs_clkctrl_regs *)MXS_CLKCTRL_BASE;
struct eth_device *dev;
int ret;
ret = cpu_eth_init(bis);
+ if (ret)
+ return ret;
clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,