#include <pci.h>
#include <asm/processor.h>
#include <asm/mmu.h>
+#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/immap_fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <libfdt.h>
#include <spd_sdram.h>
#include <fdt_support.h>
+#include <tsec.h>
+#include <netdev.h>
#include "../common/pixis.h"
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
+#include "../common/sgmii_riser.h"
phys_size_t fixed_sdram(void);
#ifdef CONFIG_SPD_EEPROM
dram_size = fsl_ddr_sdram();
-
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
-
- dram_size *= 0x100000;
#else
dram_size = fixed_sdram();
#endif
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
puts(" DDR: ");
return dram_size;
}
phys_size_t fixed_sdram (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_ddr_t *ddr= &immap->im_ddr;
uint d_init;
- ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
- ddr->cs0_config = CFG_DDR_CS0_CONFIG;
+ ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+ ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
- ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
- ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
- ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
- ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
- ddr->sdram_mode = CFG_DDR_MODE_1;
- ddr->sdram_mode_2 = CFG_DDR_MODE_2;
- ddr->sdram_interval = CFG_DDR_INTERVAL;
- ddr->sdram_data_init = CFG_DDR_DATA_INIT;
- ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
- ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+ ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+ ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+ ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
+ ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+ ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+ ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+ ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+ ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
#if defined (CONFIG_DDR_ECC)
- ddr->err_int_en = CFG_DDR_ERR_INT_EN;
- ddr->err_disable = CFG_DDR_ERR_DIS;
- ddr->err_sbe = CFG_DDR_SBE;
+ ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
+ ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
+ ddr->err_sbe = CONFIG_SYS_DDR_SBE;
#endif
asm("sync;isync");
udelay(500);
- ddr->sdram_cfg = CFG_DDR_CONTROL;
+ ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
d_init = 1;
static struct pci_controller pcie3_hose;
#endif
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
+
int first_free_busno=0;
void
pci_init_board(void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
uint devdisr = gur->devdisr;
uint sdrs2_io_sel =
(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
#ifdef CONFIG_PCIE3
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE3_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR;
struct pci_controller *hose = &pcie3_hose;
int pcie_ep = (host_agent == 1);
int pcie_configured = (io_sel == 7);
+ struct pci_region *r = hose->regions;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE3 connected to Slot3 as %s (base address %x)",
printf ("\n");
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCIE3_MEM_BASE,
- CFG_PCIE3_MEM_PHYS,
- CFG_PCIE3_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE3_MEM_BASE,
+ CONFIG_SYS_PCIE3_MEM_PHYS,
+ CONFIG_SYS_PCIE3_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCIE3_IO_BASE,
- CFG_PCIE3_IO_PHYS,
- CFG_PCIE3_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE3_IO_BASE,
+ CONFIG_SYS_PCIE3_IO_PHYS,
+ CONFIG_SYS_PCIE3_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
#ifdef CONFIG_PCIE1
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
struct pci_controller *hose = &pcie1_hose;
int pcie_ep = (host_agent == 5);
int pcie_configured = (io_sel == 2 || io_sel == 3
|| io_sel == 5 || io_sel == 7);
+ struct pci_region *r = hose->regions;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE1 connected to Slot1 as %s (base address %x)",
printf ("\n");
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCIE1_MEM_BASE,
- CFG_PCIE1_MEM_PHYS,
- CFG_PCIE1_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE1_MEM_BASE,
+ CONFIG_SYS_PCIE1_MEM_PHYS,
+ CONFIG_SYS_PCIE1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCIE1_IO_BASE,
- CFG_PCIE1_IO_PHYS,
- CFG_PCIE1_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE1_IO_BASE,
+ CONFIG_SYS_PCIE1_IO_PHYS,
+ CONFIG_SYS_PCIE1_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
-#ifdef CFG_PCIE1_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE1_MEM_BASE2
/* outbound memory */
- pci_set_region(hose->regions + 3,
- CFG_PCIE1_MEM_BASE2,
- CFG_PCIE1_MEM_PHYS2,
- CFG_PCIE1_MEM_SIZE2,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE1_MEM_BASE2,
+ CONFIG_SYS_PCIE1_MEM_PHYS2,
+ CONFIG_SYS_PCIE1_MEM_SIZE2,
PCI_REGION_MEM);
- hose->region_count++;
#endif
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
#ifdef CONFIG_PCIE2
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE2_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR;
struct pci_controller *hose = &pcie2_hose;
int pcie_ep = (host_agent == 3);
int pcie_configured = (io_sel == 5 || io_sel == 7);
+ struct pci_region *r = hose->regions;
if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
printf ("\n PCIE2 connected to Slot 2 as %s (base address %x)",
printf ("\n");
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCIE2_MEM_BASE,
- CFG_PCIE2_MEM_PHYS,
- CFG_PCIE2_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE2_MEM_BASE,
+ CONFIG_SYS_PCIE2_MEM_PHYS,
+ CONFIG_SYS_PCIE2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCIE2_IO_BASE,
- CFG_PCIE2_IO_PHYS,
- CFG_PCIE2_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE2_IO_BASE,
+ CONFIG_SYS_PCIE2_IO_PHYS,
+ CONFIG_SYS_PCIE2_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
-#ifdef CFG_PCIE2_MEM_BASE2
+#ifdef CONFIG_SYS_PCIE2_MEM_BASE2
/* outbound memory */
- pci_set_region(hose->regions + 3,
- CFG_PCIE2_MEM_BASE2,
- CFG_PCIE2_MEM_PHYS2,
- CFG_PCIE2_MEM_SIZE2,
+ pci_set_region(r++,
+ CONFIG_SYS_PCIE2_MEM_BASE2,
+ CONFIG_SYS_PCIE2_MEM_PHYS2,
+ CONFIG_SYS_PCIE2_MEM_SIZE2,
PCI_REGION_MEM);
- hose->region_count++;
#endif
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
#ifdef CONFIG_PCI1
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
struct pci_controller *hose = &pci1_hose;
+ struct pci_region *r = hose->regions;
uint pci_agent = (host_agent == 6);
uint pci_speed = 66666000; /*get_clock_freq (); PCI PSPEED in [4:5] */
);
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCI1_MEM_BASE,
- CFG_PCI1_MEM_PHYS,
- CFG_PCI1_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI1_MEM_BASE,
+ CONFIG_SYS_PCI1_MEM_PHYS,
+ CONFIG_SYS_PCI1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCI1_IO_BASE,
- CFG_PCI1_IO_PHYS,
- CFG_PCI1_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI1_IO_BASE,
+ CONFIG_SYS_PCI1_IO_PHYS,
+ CONFIG_SYS_PCI1_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
-#ifdef CFG_PCI1_MEM_BASE2
+
+#ifdef CONFIG_SYS_PCI1_MEM_BASE2
/* outbound memory */
- pci_set_region(hose->regions + 3,
- CFG_PCI1_MEM_BASE2,
- CFG_PCI1_MEM_PHYS2,
- CFG_PCI1_MEM_SIZE2,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI1_MEM_BASE2,
+ CONFIG_SYS_PCI1_MEM_PHYS2,
+ CONFIG_SYS_PCI1_MEM_SIZE2,
PCI_REGION_MEM);
- hose->region_count++;
#endif
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
int board_early_init_r(void)
{
- unsigned int i;
- const unsigned int flashbase = CFG_FLASH_BASE;
+ const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
const u8 flash_esel = 1;
/*
* so that flash can be erased properly.
*/
- /* Invalidate any remaining lines of the flash from caches. */
- for (i = 0; i < 256*1024*1024; i+=32) {
- asm volatile ("dcbi %0,%1": : "b" (flashbase), "r" (i));
- asm volatile ("icbi %0,%1": : "b" (flashbase), "r" (i));
- }
+ /* Flush d-cache and invalidate i-cache of any FLASH data */
+ flush_dcache();
+ invalidate_icache();
/* invalidate existing TLB entry for flash + promjet */
disable_tlb(flash_esel);
int is_sata_supported(void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
- uint devdisr = gur->devdisr;
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
uint sdrs2_io_sel =
(gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
if (sdrs2_io_sel & 0x04)
return 1;
}
-#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int board_eth_init(bd_t *bis)
{
- int node, tmp[2];
- const char *path;
+#ifdef CONFIG_TSEC_ENET
+ struct tsec_info_struct tsec_info[2];
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ int num = 0;
+ uint sdrs2_io_sel =
+ (gur->pordevsr & MPC85xx_PORDEVSR_SRDS2_IO_SEL) >> 27;
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6)) {
+ tsec_info[num].phyaddr = 0;
+ tsec_info[num].flags |= TSEC_SGMII;
+ }
+ num++;
+#endif
+#ifdef CONFIG_TSEC3
+ SET_STD_TSEC_INFO(tsec_info[num], 3);
+ if (sdrs2_io_sel == 4) {
+ tsec_info[num].phyaddr = 1;
+ tsec_info[num].flags |= TSEC_SGMII;
+ }
+ num++;
+#endif
+
+ if (!num) {
+ printf("No TSECs initialized\n");
+ return 0;
+ }
+
+ if ((sdrs2_io_sel == 4) || (sdrs2_io_sel == 6))
+ fsl_sgmii_riser_init(tsec_info, num);
+
+ tsec_eth_init(bis, tsec_info, num);
+#endif
+ return pci_eth_init(bis);
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+ struct pci_controller *hose);
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
ft_cpu_setup(blob, bd);
- node = fdt_path_offset(blob, "/aliases");
- tmp[0] = 0;
- if (node >= 0) {
#ifdef CONFIG_PCI1
- path = fdt_getprop(blob, node, "pci0", NULL);
- if (path) {
- tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
#endif
#ifdef CONFIG_PCIE2
- path = fdt_getprop(blob, node, "pci1", NULL);
- if (path) {
- tmp[1] = pcie2_hose.last_busno - pcie2_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci1", &pcie2_hose);
#endif
-#ifdef CONFIG_PCIE1
- path = fdt_getprop(blob, node, "pci2", NULL);
- if (path) {
- tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+#ifdef CONFIG_PCIE2
+ ft_fsl_pci_setup(blob, "pci2", &pcie1_hose);
#endif
-#ifdef CONFIG_PCIE3
- path = fdt_getprop(blob, node, "pci3", NULL);
- if (path) {
- tmp[1] = pcie3_hose.last_busno - pcie3_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+#ifdef CONFIG_PCIE1
+ ft_fsl_pci_setup(blob, "pci3", &pcie3_hose);
#endif
- }
}
#endif
projects / karo-tx-uboot.git / blobdiff