/*
- * Copyright 2004, 2007, 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2004, 2007, 2009-2011 Freescale Semiconductor, Inc.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
-#include <spd_sdram.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <tsec.h>
+#include <fsl_mdio.h>
+#include <netdev.h>
#include "../common/cadmus.h"
#include "../common/eeprom.h"
#include "../common/via.h"
-DECLARE_GLOBAL_DATA_PTR;
-
void local_bus_init(void);
-void sdram_init(void);
int checkboard (void)
{
uint cpu_board_rev = get_cpu_board_revision ();
- printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
- get_board_version (), pci_slot);
-
- printf ("CPU Board Revision %d.%d (0x%04x)\n",
+ puts("Board: MPC8548CDS");
+ printf(" Carrier Rev: 0x%02x, PCI Slot %d\n",
+ get_board_version(), pci_slot);
+ printf(" Daughtercard Rev: %d.%d (0x%04x)\n",
MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
/*
return 0;
}
-phys_size_t
-initdram(int board_type)
-{
- long dram_size = 0;
-
- puts("Initializing\n");
-
-#if defined(CONFIG_DDR_DLL)
- {
- /*
- * Work around to stabilize DDR DLL MSYNC_IN.
- * Errata DDR9 seems to have been fixed.
- * This is now the workaround for Errata DDR11:
- * Override DLL = 1, Course Adj = 1, Tap Select = 0
- */
-
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-
- gur->ddrdllcr = 0x81000000;
- asm("sync;isync;msync");
- udelay(200);
- }
-#endif
-
- dram_size = fsl_ddr_sdram();
- dram_size = setup_ddr_tlbs(dram_size / 0x100000);
- dram_size *= 0x100000;
-
- /*
- * SDRAM Initialization
- */
- sdram_init();
-
- puts(" DDR: ");
- return dram_size;
-}
-
/*
* Initialize Local Bus
*/
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint clkdiv;
- uint lbc_hz;
sys_info_t sysinfo;
get_sys_info(&sysinfo);
clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
- lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
gur->lbiuiplldcr1 = 0x00078080;
if (clkdiv == 16) {
/*
* Initialize SDRAM memory on the Local Bus.
*/
-void
-sdram_init(void)
+void lbc_sdram_init(void)
{
#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
uint idx;
volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
- uint cpu_board_rev;
uint lsdmr_common;
- puts(" SDRAM: ");
-
- print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ puts("LBC SDRAM: ");
+ print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
+ "\n");
/*
* Setup SDRAM Base and Option Registers
/*
* MPC8548 uses "new" 15-16 style addressing.
*/
- cpu_board_rev = get_cpu_board_revision();
lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
lsdmr_common |= LSDMR_BSMA1516;
{},
};
-static struct pci_controller pci1_hose = {
- config_table: pci_mpc85xxcds_config_table};
+static struct pci_controller pci1_hose;
#endif /* CONFIG_PCI */
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif /* CONFIG_PCI2 */
-
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif /* CONFIG_PCIE1 */
-
void pci_init_board(void)
{
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- struct fsl_pci_info pci_info[4];
+ struct fsl_pci_info pci_info;
u32 devdisr, pordevsr, io_sel;
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
int first_free_busno = 0;
- int num = 0;
-
- int pcie_ep, pcie_configured;
+ char buf[32];
devdisr = in_be32(&gur->devdisr);
pordevsr = in_be32(&gur->pordevsr);
pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
- SET_STD_PCI_INFO(pci_info[num], 1);
- pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
- printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
+ SET_STD_PCI_INFO(pci_info, 1);
+ set_next_law(pci_info.mem_phys,
+ law_size_bits(pci_info.mem_size), pci_info.law);
+ set_next_law(pci_info.io_phys,
+ law_size_bits(pci_info.io_size), pci_info.law);
+
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
+ printf("PCI1: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
- (pci_speed == 33333000) ? "33" :
- (pci_speed == 66666000) ? "66" : "unknown",
+ strmhz(buf, pci_speed),
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
pci_arb ? "arbiter" : "external-arbiter",
- pci_info[num].regs);
+ pci_info.regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ pci1_hose.config_table = pci_mpc85xxcds_config_table;
+ first_free_busno = fsl_pci_init_port(&pci_info,
&pci1_hose, first_free_busno);
#ifdef CONFIG_PCIX_CHECK
}
#endif
} else {
- printf("PCI: disabled\n");
+ printf("PCI1: disabled\n");
}
puts("\n");
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
#endif /* CONFIG_PCI2 */
-#ifdef CONFIG_PCIE1
- pcie_configured = is_serdes_configured(PCIE1);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
- SET_STD_PCIE_INFO(pci_info[num], 1);
- pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf("PCIE1: connected to Slot as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
-
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie1_hose, first_free_busno);
- } else {
- printf("PCIE1: disabled\n");
- }
-
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
-#endif
+ fsl_pcie_init_board(first_free_busno);
}
-int last_stage_init(void)
+void configure_rgmii(void)
{
unsigned short temp;
/* This is needed to get the RGMII working for the 1.3+
* CDS cards */
if (get_board_version() == 0x13) {
- miiphy_write(CONFIG_TSEC1_NAME,
+ miiphy_write(DEFAULT_MII_NAME,
TSEC1_PHY_ADDR, 29, 18);
- miiphy_read(CONFIG_TSEC1_NAME,
+ miiphy_read(DEFAULT_MII_NAME,
TSEC1_PHY_ADDR, 30, &temp);
temp = (temp & 0xf03f);
temp |= 2 << 9; /* 36 ohm */
temp |= 2 << 6; /* 39 ohm */
- miiphy_write(CONFIG_TSEC1_NAME,
+ miiphy_write(DEFAULT_MII_NAME,
TSEC1_PHY_ADDR, 30, temp);
- miiphy_write(CONFIG_TSEC1_NAME,
+ miiphy_write(DEFAULT_MII_NAME,
TSEC1_PHY_ADDR, 29, 3);
- miiphy_write(CONFIG_TSEC1_NAME,
+ miiphy_write(DEFAULT_MII_NAME,
TSEC1_PHY_ADDR, 30, 0x8000);
}
- return 0;
+ return;
}
+#ifdef CONFIG_TSEC_ENET
+int board_eth_init(bd_t *bis)
+{
+ struct fsl_pq_mdio_info mdio_info;
+ struct tsec_info_struct tsec_info[4];
+ int num = 0;
+
+#ifdef CONFIG_TSEC1
+ SET_STD_TSEC_INFO(tsec_info[num], 1);
+ num++;
+#endif
+#ifdef CONFIG_TSEC2
+ SET_STD_TSEC_INFO(tsec_info[num], 2);
+ num++;
+#endif
+#ifdef CONFIG_TSEC3
+ /* initialize TSEC3 only if Carrier is 1.3 or above on CDS */
+ if (get_board_version() >= 0x13) {
+ SET_STD_TSEC_INFO(tsec_info[num], 3);
+ tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
+ num++;
+ }
+#endif
+#ifdef CONFIG_TSEC4
+ /* initialize TSEC4 only if Carrier is 1.3 or above on CDS */
+ if (get_board_version() >= 0x13) {
+ SET_STD_TSEC_INFO(tsec_info[num], 4);
+ tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID;
+ num++;
+ }
+#endif
+
+ if (!num) {
+ printf("No TSECs initialized\n");
+
+ return 0;
+ }
+
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+ fsl_pq_mdio_init(bis, &mdio_info);
+
+ tsec_eth_init(bis, tsec_info, num);
+ configure_rgmii();
+
+ return pci_eth_init(bis);
+}
+#endif
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_pci_setup(void *blob, bd_t *bd)
projects / karo-tx-uboot.git / blobdiff