powerpc/t1023rdb: Add T1023 RDB board support

[karo-tx-uboot.git] / board / freescale / t102xrdb / eth_t102xrdb.c

diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c
index f611ff07e98cb8858995f5d67c10257ea6b44c2b..dd386bc3a99324970f91a0bc6a1ba7cc16041f45 100644 (file)
--- a/board/freescale/t102xrdb/eth_t102xrdb.c
+++ b/board/freescale/t102xrdb/eth_t102xrdb.c
@@ -1,6 +1,8 @@
 /*
  * Copyright 2014 Freescale Semiconductor, Inc.
  *
+ * Shengzhou Liu <Shengzhou.Liu@freescale.com>
+ *
  * SPDX-License-Identifier:     GPL-2.0+
  */
 
@@ -56,6 +58,7 @@ int board_eth_init(bd_t *bis)
        fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR);
 
        switch (srds_s1) {
+#ifdef CONFIG_T1024RDB
        case 0x95:
                /* set the on-board RGMII2  PHY */
                fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR);
@@ -63,10 +66,17 @@ int board_eth_init(bd_t *bis)
                /* set 10G XFI with Aquantia AQR105 PHY */
                fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
                break;
+#endif
+       case 0x6a:
+       case 0x6b:
        case 0x77:
        case 0x135:
                /* set the on-board 2.5G SGMII AQR105 PHY */
-               fm_info_set_phy_address(FM1_DTSEC3, SGMII_PHY1_ADDR);
+               fm_info_set_phy_address(FM1_DTSEC3, SGMII_AQR_PHY_ADDR);
+#ifdef CONFIG_T1023RDB
+               /* set the on-board 1G SGMII RTL8211F PHY */
+               fm_info_set_phy_address(FM1_DTSEC1, SGMII_RTK_PHY_ADDR);
+#endif
                break;
        default:
                printf("SerDes protocol 0x%x is not supported on T102xRDB\n",
@@ -81,6 +91,14 @@ int board_eth_init(bd_t *bis)
                        dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
                        fm_info_set_mdio(i, dev);
                        break;
+               case PHY_INTERFACE_MODE_SGMII:
+#if defined(CONFIG_T1023RDB)
+                       dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME);
+#elif defined(CONFIG_T1024RDB)
+                       dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
+#endif
+                       fm_info_set_mdio(i, dev);
+                       break;
                case PHY_INTERFACE_MODE_SGMII_2500:
                        dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME);
                        fm_info_set_mdio(i, dev);
@@ -110,13 +128,16 @@ int board_eth_init(bd_t *bis)
 void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
                              enum fm_port port, int offset)
 {
-       if ((fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) &&
-           (port == FM1_DTSEC3)) {
+#if defined(CONFIG_T1024RDB)
+       if (((fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) ||
+            (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII)) &&
+                       (port == FM1_DTSEC3)) {
                fdt_set_phy_handle(fdt, compat, addr, "sg_2500_aqr105_phy4");
                fdt_setprop(fdt, offset, "phy-connection-type",
                            "sgmii-2500", 10);
                fdt_status_disabled_by_alias(fdt, "xg_aqr105_phy3");
        }
+#endif
 }
 
 void fdt_fixup_board_enet(void *fdt)