arm: pxa: config option for PXA270 turbo mode

[karo-tx-uboot.git] / board / r360mpi / pcmcia.c

diff --git a/board/r360mpi/pcmcia.c b/board/r360mpi/pcmcia.c
index a83ca8da4727c97d37fbf2c80eae73d99cd53837..a939b31d47a2f09e7f1c983518dfb0b729fdf737 100644 (file)
--- a/board/r360mpi/pcmcia.c
+++ b/board/r360mpi/pcmcia.c
@@ -19,7 +19,6 @@
 int pcmcia_hardware_enable(int slot)
 {
        volatile immap_t        *immap;
-       volatile cpm8xx_t       *cp;
        volatile pcmconf8xx_t   *pcmp;
        volatile sysconf8xx_t   *sysp;
        uint reg, mask;
@@ -28,10 +27,9 @@ int pcmcia_hardware_enable(int slot)
 
        udelay(10000);
 
-       immap = (immap_t *)CFG_IMMR;
-       sysp  = (sysconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_siu_conf));
-       pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
-       cp    = (cpm8xx_t *)(&(((immap_t *)CFG_IMMR)->im_cpm));
+       immap = (immap_t *)CONFIG_SYS_IMMR;
+       sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
+       pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
 
        /*
        * Configure SIUMCR to enable PCMCIA port B
@@ -127,13 +125,11 @@ int pcmcia_hardware_enable(int slot)
 int pcmcia_hardware_disable(int slot)
 {
        volatile immap_t        *immap;
-       volatile pcmconf8xx_t   *pcmp;
        u_long reg;
 
        debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
 
-       immap = (immap_t *)CFG_IMMR;
-       pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+       immap = (immap_t *)CONFIG_SYS_IMMR;
 
        /* remove all power */
        immap->im_ioport.iop_pcdat |= 0x0400;
@@ -164,8 +160,8 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
                        " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
        'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
 
-       immap = (immap_t *)CFG_IMMR;
-       pcmp = (pcmconf8xx_t *)(&(((immap_t *)CFG_IMMR)->im_pcmcia));
+       immap = (immap_t *)CONFIG_SYS_IMMR;
+       pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
        /*
        * Disable PCMCIA buffers (isolate the interface)
        * and assert RESET signal
@@ -195,10 +191,10 @@ int pcmcia_voltage_set(int slot, int vcc, int vpp)
 
        reg = 0;
        switch(vcc) {
-               case  0:                break;
+               case  0:                break;
                case 33: reg |= 0x0200; break;
                case 50: reg |= 0x0400; break;
-               default:                goto done;
+               default:                goto done;
        }
 
        /* Checking supported voltages */