pm9261: init serial console before relocation

[karo-tx-uboot.git] / board / ronetix / pm9261 / pm9261.c

diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index c6b582d2b97d21aebfbdd64a95285fd314ab279e..79a3216d31c05295950b4e52ff31232b91c81e14 100644 (file)
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -237,21 +237,28 @@ void lcd_show_board_info(void)
 
 #endif /* CONFIG_LCD */
 
-int board_init(void)
+int board_early_init_f(void)
 {
        struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
 
-       /* Enable Ctrlc */
-       console_init_f();
-
+       /* Enable clocks for some PIOs */
        writel(1 << ATMEL_ID_PIOA |
                1 << ATMEL_ID_PIOC,
                &pmc->pcer);
 
+       at91_seriald_hw_init();
+
+       return 0;
+}
+
+int board_init(void)
+{
+       /* arch number of PM9261-Board */
+       gd->bd->bi_arch_number = MACH_TYPE_PM9261;
+
        /* adress of boot parameters */
        gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
-       at91_seriald_hw_init();
 #ifdef CONFIG_CMD_NAND
        pm9261_nand_hw_init();
 #endif