x86: Remove Unmaintained Boards

[karo-tx-uboot.git] / board / sc520_spunk / sc520_spunk_asm.S

diff --git a/board/sc520_spunk/sc520_spunk_asm.S b/board/sc520_spunk/sc520_spunk_asm.S
deleted file mode 100644 (file)
index eda7e91..0000000
--- a/board/sc520_spunk/sc520_spunk_asm.S
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB <daniel@omicron.se>.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/* now setup the General purpose bus to give us access to the LEDs.
- * We can then use the leds to display status information.
- */
-
-sc520_cdp_registers:
-/* size    offset        value */
-.word 1 ; .word 0x040 ; .long 0x00       /* SDRAM buffer control */
-.word 2 ; .word 0xc08 ; .long 0x0001     /* GP CS offset */
-.word 2 ; .word 0xc09 ; .long 0x0003     /* GP CS width */
-.word 2 ; .word 0xc0a ; .long 0x0001     /* GP CS width */
-.word 2 ; .word 0xc0b ; .long 0x0003     /* GP RD pulse width */
-.word 2 ; .word 0xc0c ; .long 0x0001     /* GP RD offse */
-.word 2 ; .word 0xc0d ; .long 0x0003     /* GP WR pulse width */
-.word 2 ; .word 0xc0e ; .long 0x0001     /* GP WR offset */
-.word 2 ; .word 0xc2c ; .long 0x003f     /* GPIO directionreg 31-16 */
-.word 2 ; .word 0xc2a ; .long 0xe000     /* GPIO directionreg 15-0 */
-.word 2 ; .word 0xc22 ; .long 0xffc0     /* GPIO pin function 31-16 reg */
-.word 2 ; .word 0xc20 ; .long 0x1fff     /* GPIO pin function 15-0 reg */
-.word 0 ; .word 0x000 ; .long 0x00
-
-/* board early intialization */
-.globl early_board_init
-early_board_init:
-       movl    $sc520_cdp_registers,%esi
-init_loop:
-       movl    $0xfffef000,%edi     /* MMCR base to edi */
-       movw    (%esi), %bx          /* load size to bx */
-       cmpw    $0, %bx              /* if size is 0 we're done */
-       je      done
-       xorl    %edx,%edx
-       movw    2(%esi), %dx        /* load MMCR offset to dx */
-       addl    %edx, %edi          /* add offset to base in edi */
-       movl    4(%esi), %eax       /* load value in eax */
-       cmpw    $1, %bx
-       je      byte                 /* byte op? */
-       cmpw    $2, %bx
-       je      word                 /* word op? */
-       movl    %eax, (%edi)         /* must be long, then */
-       jmp     next
-byte:   movb    %al,(%edi)
-       jmp     next
-word:  movw    %ax,(%edi)
-next:  addl    $8, %esi             /* advance esi */
-       jmp     init_loop
-
-       /* light all leds */
-done:   movl    $0xfffefc32,%edx
-       movw    $0000,(%edx)
-
-       jmp     *%ebp                /* return to caller */
-
-
-.globl show_boot_progress_asm
-show_boot_progress_asm:
-       movl    $0xfffefc32,%edx
-       xorw    $0xffff, %ax
-       movw    %ax,(%edx)
-       jmp     *%ebp