karo: fdt: fix inverted pixelclock polarity

[karo-tx-uboot.git] / board / sunxi / Kconfig

diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig
index e1c5e1df403193481b66bc18e86803c50592cfeb..55906b5b76046b701997b6df50372ea636a94336 100644 (file)
--- a/board/sunxi/Kconfig
+++ b/board/sunxi/Kconfig
@@ -410,6 +410,13 @@ config VIDEO_VGA_EXTERNAL_DAC_EN
        Set the enable pin for the external VGA DAC. This takes a string in the
        format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
 
+config VIDEO_COMPOSITE
+       boolean "Composite video output support"
+       depends on VIDEO && (MACH_SUN4I || MACH_SUN5I || MACH_SUN7I)
+       default n
+       ---help---
+       Say Y here to add support for outputting composite video.
+
 config VIDEO_LCD_MODE
        string "LCD panel timing details"
        depends on VIDEO
@@ -418,6 +425,7 @@ config VIDEO_LCD_MODE
        LCD panel timing details string, leave empty if there is no LCD panel.
        This is in drivers/video/videomodes.c: video_get_params() format, e.g.
        x:800,y:480,depth:18,pclk_khz:33000,le:16,ri:209,up:22,lo:22,hs:30,vs:1,sync:0,vmode:0
+       Also see: http://linux-sunxi.org/LCD
 
 config VIDEO_LCD_DCLK_PHASE
        int "LCD panel display clock phase"
@@ -519,7 +527,16 @@ config VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828
        select VIDEO_LCD_SSD2828
        select VIDEO_LCD_IF_PARALLEL
        ---help---
-        7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0
+       7.85" 768x1024 LCD panels, such as LG LP079X01 or AUO B079XAN01.0
+
+config VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804
+       bool "eDP 4-lane, 1.62G LCD panel via ANX9804 bridge chip"
+       select VIDEO_LCD_ANX9804
+       select VIDEO_LCD_IF_PARALLEL
+       select VIDEO_LCD_PANEL_I2C
+       ---help---
+       Select this for eDP LCD panels with 4 lanes running at 1.62G,
+       connected via an ANX9804 bridge chip.
 
 config VIDEO_LCD_PANEL_HITACHI_TX18D42VM
        bool "Hitachi tx18d42vm LCD panel"
@@ -539,13 +556,6 @@ config VIDEO_LCD_TL059WV5C0
 endchoice
 
 
-config USB_KEYBOARD
-       boolean "Enable USB keyboard support"
-       default y
-       ---help---
-       Say Y here to add support for using a USB keyboard (typically used
-       in combination with a graphical console).
-
 config GMAC_TX_DELAY
        int "GMAC Transmit Clock Delay Chain"
        default 0