* (C) Copyright 2004
* Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc5xxx.h>
#include <pci.h>
+#include <netdev.h>
#include "sdram.h"
#include "mt48lc16m16a2-75.h"
#endif
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
{
sdram_conf_t sdram_conf;
sdram_conf.control = SDRAM_CONTROL;
sdram_conf.config1 = SDRAM_CONFIG1;
sdram_conf.config2 = SDRAM_CONFIG2;
-#if defined(CONFIG_MPC5200)
sdram_conf.tapdelay = 0;
-#endif
-#if defined(CONFIG_MGT5100)
- sdram_conf.addrsel = SDRAM_ADDRSEL;
-#endif
return mpc5xxx_sdram_init (&sdram_conf);
}
int checkboard (void)
{
-#if defined(CONFIG_MPC5200)
#if CONFIG_TOTAL5200_REV==2
puts ("Board: Total5200 Rev.2 ");
#else
puts ("Board: Total5200 ");
#endif
-#elif defined(CONFIG_MGT5100)
- puts ("Board: Total5100 ");
-#endif
-/*
- * Retrieve FPGA Revision.
- */
-printf ("(FPGA %08X)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400));
+ /*
+ * Retrieve FPGA Revision.
+ */
+ printf ("(FPGA %08lX)\n", *(vu_long *) (CONFIG_SYS_FPGA_BASE + 0x400));
-/*
- * Take all peripherals in power-up mode.
- */
+ /*
+ * Take all peripherals in power-up mode.
+ */
#if CONFIG_TOTAL5200_REV==2
- *(vu_char *) (CFG_CPLD_BASE + 0x46) = 0x70;
+ *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x46) = 0x70;
#else
- *(vu_long *) (CFG_CPLD_BASE + 0x400) = 0x70;
+ *(vu_long *) (CONFIG_SYS_CPLD_BASE + 0x400) = 0x70;
#endif
return 0;
}
-#if defined(CONFIG_MGT5100)
-int board_early_init_r(void)
-{
- /*
- * Now, when we are in RAM, enable CS0
- * because CS_BOOT cannot be written.
- */
- *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
- *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
-
- return 0;
-}
-#endif
-
#ifdef CONFIG_PCI
static struct pci_controller hose;
{
debug ("init_ide_reset\n");
- /* Configure IRDA_1 (PSC6_3) as GPIO output for ATA reset */
+ /* Configure IRDA_1 (PSC6_3) as GPIO output for ATA reset */
*(vu_long *) MPC5XXX_GPIO_ENABLE |= GPIO_IRDA_1;
*(vu_long *) MPC5XXX_GPIO_DIR |= GPIO_IRDA_1;
}
void video_get_info_str (int line_number, char *info)
{
if (line_number == 1) {
-#ifdef CONFIG_MGT5100
- strcpy (info, " Total5100");
-#elif CONFIG_TOTAL5200_REV==1
+#if CONFIG_TOTAL5200_REV==1
strcpy (info, " Total5200");
#elif CONFIG_TOTAL5200_REV==2
strcpy (info, " Total5200 Rev.2");
/* Returns SED13806 base address. First thing called in the driver. */
unsigned int board_video_init (void)
{
- return CFG_LCD_BASE;
+ return CONFIG_SYS_LCD_BASE;
}
/* Called after initializing the SED13806 and before clearing the screen. */
}
#endif /* CONFIG_VIDEO_SED13806 */
+
+int board_eth_init(bd_t *bis)
+{
+ cpu_eth_init(bis); /* Built in FEC comes first */
+ return pci_eth_init(bis);
+}