mpc8xx: remove v37 board support

[karo-tx-uboot.git] / board / v37 / v37.c

diff --git a/board/v37/v37.c b/board/v37/v37.c
deleted file mode 100644 (file)
index 438117e..0000000
--- a/board/v37/v37.c
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier:    GPL-2.0+
- */
-
-/*
- * Yoo. Jonghoon, IPone, yooth@ipone.co.kr
- * U-Boot port on RPXlite board
- *
- * DRAM related UPMA register values are modified.
- * See RPXLite engineering note : 50MHz/60ns - UPM RAM WORDS
- */
-
-#include <common.h>
-#include "mpc8xx.h"
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (void);
-
-/* ------------------------------------------------------------------------- */
-
-#define MBYTE          (1024*1024)
-#define DRAM_DELAY     0x00000379  /* DRAM delay count */
-#define        _NOT_USED_      0xFFFFCC25
-
-const uint sdram_table[] =
-{
-       /*  single read. (offset 0 in upm RAM) */
-       0x1F07D004, 0xEEAEE004, 0x11ADD004, 0xEFBBA000,
-       0x1FF75447, 0x1FF77C34, 0xEFEABC34, 0x1FB57C35,
-
-       /* burst read. (Offset 8 in upm RAM)   */
-       0x1F07D004, 0xEEAEE004, 0x00ADC004, 0x00AFC000,
-       0x00AFC000, 0x01AFC000, 0x0FBB8000, 0x1FF75447,
-       0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-       0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-       /* single write. (Offset 0x18 in upm RAM) */
-       0x1F27D004, 0xEEAEA000, 0x01B90004, 0x1FF75447,
-       0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-       /*  burst write. (Offset 0x20 in upm RAM) */
-       0x1F07D004, 0xEEAEA000, 0x00AD4000, 0x00AFC000,
-       0x00AFC000, 0x01BB8004, 0x1FF75447, 0xFFFFFFFF,
-       0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-       0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-       /* Refresh cycle, offset 0x30 */
-       0x1FF5DC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
-       0xFFFFFC84, 0xFFFFFC07, 0xFFFFFFFF, 0xFFFFFFFF,
-       0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
-       /* Exception, 0ffset 0x3C */
-       0x7FFFFC07, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-};
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Return 1 for now.
- *
- */
-
-int checkboard (void)
-{
-       printf("Marel V37\n") ;
-       return (0) ;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-    volatile memctl8xx_t *memctl = &immap->im_memctl;
-    unsigned long temp;
-    volatile int delay_cnt;
-    long int ramsize;
-
-    ramsize = dram_size();
-
-       /* Refresh clock prescalar */
-    memctl->memc_mptpr = 0x400 ;
-
-    if( ramsize == 32*MBYTE )
-       temp = 0xd0904110;
-   else                                /* 16MB */
-       temp = 0xd0802110;
-
-    memctl->memc_mbmr = temp;
-
-    upmconfig(UPMB, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
-
-       /* Map controller banks 2 to the SDRAM bank */
-    memctl->memc_or2 = 0xA00 | (0 - ramsize);
-    memctl->memc_br2 = 0xC1;
-
-    memctl->memc_mbmr = temp | 0x08;
-    memctl->memc_mcr  = 0x80804130;
-
-    delay_cnt = 0;
-    while( delay_cnt++ < DRAM_DELAY )
-       ;
-
-    /* Run MRS command in location 5-8 of UPMB */
-
-    memctl->memc_mbmr = temp | 0x04;
-    memctl->memc_mar  = 0x88;
-
-    memctl->memc_mcr  = 0x80804105;
-
-    delay_cnt = 0;
-    while( delay_cnt++ < DRAM_DELAY )
-       ;
-
-#ifdef CONFIG_CAN_DRIVER
-    /* Initialize OR3 / BR3 */
-    memctl->memc_or3 = CONFIG_SYS_OR3_CAN;
-    memctl->memc_br3 = CONFIG_SYS_BR3_CAN;
-
-    /* Initialize MBMR */
-    memctl->memc_mamr = MAMR_GPL_A4DIS;        /* GPL_A4 ouput line Disable */
-
-    /* Initialize UPMB for CAN: single read */
-    memctl->memc_mdr = 0xFFFFC004;
-    memctl->memc_mcr = 0x0100 | UPMA;
-
-    memctl->memc_mdr = 0x0FFFD004;
-    memctl->memc_mcr = 0x0101 | UPMA;
-
-    memctl->memc_mdr = 0x0FFFC000;
-    memctl->memc_mcr = 0x0102 | UPMA;
-
-    memctl->memc_mdr = 0x3FFFC004;
-    memctl->memc_mcr = 0x0103 | UPMA;
-
-    memctl->memc_mdr = 0xFFFFDC05;
-    memctl->memc_mcr = 0x0104 | UPMA;
-
-    /* Initialize UPMB for CAN: single write */
-    memctl->memc_mdr = 0xFFFCC004;
-    memctl->memc_mcr = 0x0118 | UPMA;
-
-    memctl->memc_mdr = 0xCFFCD004;
-    memctl->memc_mcr = 0x0119 | UPMA;
-
-    memctl->memc_mdr = 0x0FFCC000;
-    memctl->memc_mcr = 0x011A | UPMA;
-
-    memctl->memc_mdr = 0x7FFCC004;
-    memctl->memc_mcr = 0x011B | UPMA;
-
-    memctl->memc_mdr = 0xFFFDCC05;
-    memctl->memc_mcr = 0x011C | UPMA;
-#endif /* CONFIG_CAN_DRIVER */
-
-    return (dram_size());
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Find size of RAM from configuration pins.
- * The input pins that contain the memory size are also the debug port
- * pins.  Normally they are configured as debug port pins.  To be able
- * to read the memory configuration, we must deactivate the debug port
- * and enable the pcmcia input pins.  Then return the register to
- * previous state.
- */
-
-static long int dram_size ()
-{
-    volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-    volatile sysconf8xx_t *siu = &immap->im_siu_conf;
-    volatile pcmconf8xx_t *pcm = &immap->im_pcmcia;
-    long int             i, memory=1;
-    unsigned long siu_mcr;
-
-    siu_mcr = siu->sc_siumcr;
-    siu->sc_siumcr = siu_mcr & 0xFF9FFFFF;
-    for(i=0; i<10; i++) i = i;
-
-    memory = (pcm->pcmc_pipr>>12) & 0x3;
-
-    siu->sc_siumcr = siu_mcr;
-
-    switch( memory )
-    {
-       case 1:
-           return( 32*MBYTE );
-       case 2:
-           return( 64*MBYTE );
-       default:
-           break;
-    }
-    return( 16*MBYTE );
-}