* (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_LOADB)
-static ulong load_serial_ymodem(ulong offset);
+static ulong load_serial_ymodem(ulong offset, int mode);
#endif
#if defined(CONFIG_CMD_LOADS)
int type; /* return code for record type */
ulong addr; /* load address from S-Record */
ulong size; /* number of bytes transferred */
- char buf[32];
ulong store_addr;
ulong start_addr = ~0;
ulong end_addr = 0;
start_addr, end_addr, size, size
);
flush_cache(start_addr, size);
- sprintf(buf, "%lX", size);
- setenv("filesize", buf);
+ setenv_hex("filesize", size);
return (addr);
case SREC_START:
break;
}
/* Check for the console hangup (if any different from serial) */
- if (gd->jt[XF_getc] != getc) {
+ if (gd->jt->getc != getc) {
if (ctrlc()) {
return (-1);
}
offset,
load_baudrate);
- addr = load_serial_ymodem(offset);
+ addr = load_serial_ymodem(offset, xyzModem_ymodem);
+
+ } else if (strcmp(argv[0],"loadx")==0) {
+ printf("## Ready for binary (xmodem) download "
+ "to 0x%08lX at %d bps...\n",
+ offset,
+ load_baudrate);
+
+ addr = load_serial_ymodem(offset, xyzModem_xmodem);
} else {
static ulong load_serial_bin(ulong offset)
{
int size, i;
- char buf[32];
set_kerm_bin_mode((ulong *) offset);
size = k_recv();
flush_cache(offset, size);
printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
- sprintf(buf, "%X", size);
- setenv("filesize", buf);
+ setenv_hex("filesize", size);
return offset;
}
return (getc());
return -1;
}
-static ulong load_serial_ymodem(ulong offset)
+static ulong load_serial_ymodem(ulong offset, int mode)
{
int size;
- char buf[32];
int err;
int res;
connection_info_t info;
ulong addr = 0;
size = 0;
- info.mode = xyzModem_ymodem;
+ info.mode = mode;
res = xyzModem_stream_open(&info, &err);
if (!res) {
flush_cache(offset, size);
printf("## Total Size = 0x%08x = %d Bytes\n", size, size);
- sprintf(buf, "%X", size);
- setenv("filesize", buf);
+ setenv_hex("filesize", size);
return offset;
}
" - save S-Record file over serial line with offset 'off' and size 'size'"
);
#endif /* CONFIG_SYS_LOADS_BAUD_CHANGE */
-#endif
-#endif
+#endif /* CONFIG_CMD_SAVES */
+#endif /* CONFIG_CMD_LOADS */
#if defined(CONFIG_CMD_LOADB)
" with offset 'off' and baudrate 'baud'"
);
+U_BOOT_CMD(
+ loadx, 3, 0, do_load_serial_bin,
+ "load binary file over serial line (xmodem mode)",
+ "[ off ] [ baud ]\n"
+ " - load binary file over serial line"
+ " with offset 'off' and baudrate 'baud'"
+);
+
U_BOOT_CMD(
loady, 3, 0, do_load_serial_bin,
"load binary file over serial line (ymodem mode)",
" with offset 'off' and baudrate 'baud'"
);
-#endif
+#endif /* CONFIG_CMD_LOADB */
/* -------------------------------------------------------------------- */
"[on|off]"
);
-#endif
+#endif /* CONFIG_CMD_HWFLOW */